Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    Vontronlp21 4040en1

    Uploaded by

    sukiraj Rasalingam
    This document summarizes the VONTRON LP21-4040T RO membrane element. It has a membrane area of 100 square feet, can produce 2800 gallons per day of permeate from brackish water with 99.6% rejection. It is suitable for treatment of water with total dissolved solids less than 10,000 ppm and is used to produce purified water for industries. The membrane element has specific dimensions and operating conditions and the document provides instructions for start-up, storage, and chemical limitations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Vontronlp21 4040en1

    Uploaded by

    sukiraj Rasalingam
    36 views2 pages
    This document summarizes the VONTRON LP21-4040T RO membrane element. It has a membrane area of 100 square feet, can produce 2800 gallons per day of permeate from brackish water with 99.6% rejection. It is suitable for treatment of water with total dissolved solids less than 10,000 ppm and is used to produce purified water for industries. The membrane element has specific dimensions and operating conditions and the document provides instructions for start-up, storage, and chemical limitations.

    Original Title

    VONTRONLP21-4040EN1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the VONTRON LP21-4040T RO membrane element. It has a membrane area of 100 square feet, can produce 2800 gallons per day of permeate from brackish water with 99.6% rejection. It is suitable for treatment of water with total dissolved solids less than 10,000 ppm and is used to produce purified water for industries. The membrane element has specific dimensions and operating conditions and the document provides instructions for start-up, storage, and chemical limitations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views2 pages

    Vontronlp21 4040en1

    Uploaded by

    sukiraj Rasalingam
    This document summarizes the VONTRON LP21-4040T RO membrane element. It has a membrane area of 100 square feet, can produce 2800 gallons per day of permeate from brackish water with 99.6% rejection. It is suitable for treatment of water with total dissolved solids less than 10,000 ppm and is used to produce purified water for industries. The membrane element has specific dimensions and operating conditions and the document provides instructions for start-up, storage, and chemical limitations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    VONTRON LP21-4040T RO Element

    Brief Introduction

    LP series of low pressure aromatic polyamide RO element is developed by VONTRON for


    treatment of brackish water. It has the characteristics of low-pressure in operation, high permeate
    flow and excellent rejection performance in removing of solvable salts, TOC, SiO2, etc. It is
    especially suitable for the preparation of high purity water in electronics and power industry.

    LP series of low pressure element normally suitable for treatment of brackish water, surface water,
    underground water and municipal water with TDS is less than 10000 ppm. It is mainly used for
    producing various scales of bottle water, drinking water, industrial used pure water, high purity
    water, boiler replenishment water, also for wastewater reuse, material concentration, purification
    and refining purposes.

    Feed Spacer
    Active Membrane Average Permeate Stable Rejection
    Model Thickness
    Area ft2(m2) GPD(m3/d) Rate %
    mil

    LP21-4040 100（9.3） 2800（10.6） 99.6 28

    Operating pressure 225 psi (1.55MPa)


    Temperature at 25℃
    Testing
    Tested at 2000mg/L NaCl solution
    Conditions
    pH 7.0 ± 0.5
    Recovery rate at 15%
    Maximum operating pressure 600psi（4.14MPa）
    Maximum feedwater flow 16gpm（3.6 m3/h）
    Maximum feedwater temperature 45℃
    Operation
    Maximum feedwater flow SDI 15 5
    Limits & Allowed pH range for feedwater in operation 2～11

    Conditions Allowed pH range for chemical cleaning 1～13


    Maximum concentration of free chlorine ＜0.1ppm
    Maximum pressure drop per element 15psi（0.1MPa）

    Size of Membrane Element：1.0 inch = 25.4 mm

    A/mm(inch) B/mm(inch) C/mm(inch) D/mm(inch)


    1016.0(40) 99.7(3.9) 19.1(0.75) 26.7(1.05)

    WWW.VONTRON.COM
    Notice:

    1. All data and information provided in this manual have been obtained from long-term
    experiment by Vontron. We confirm the effective and accuracy of the data. We assume no liability
    for any consequences of user’s failure in abiding the conditions specified in this manual in use or
    maintenance of membrane products. It is strongly recommended that the user shall strictly abide
    the designed use and maintenance requirements and keep relevant records.
    2. The permeate value listed in the table is the average value. The permeate flow of single
    membrane element is tolerance not exceeding ±20% of the nominal value.
    3. All wet-type membrane elements have been strictly tested before leaving the factory, and
    have been treated with 1.0% sodium hydrogen sulfite (10% glycerin antifreeze required in winter)
    for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes.
    4. The membrane used should remain wet after being used; In long term suspension, to prevent
    the breeding of microbes, soak the membrane elements with protective solution is highly
    recommended, the solution (prepared with RO filtered water) containing 1.0% sodium hydrogen
    sulfite (food grade).
    5. Operate low pressure flushing for 15-25 minutes of first use, high pressure flushing for 60-90
    minutes when first use (Permeate flow no less than 50% of designed flow). Discard all the
    permeate and concentrated water produced during the first one hour after system start-up.
    6. During storage and operation period, it is strictly prohibited to add any chemicals that may be
    harmful to membrane elements. In case of any violation in adding chemicals, Vontron assumes no
    liabilities for any damages incurred.
    7. Along with technical development and product renovation, all information will be subject to
    modification without prior notification. Please keep notice of our website for any updates of the
    product.

    WWW.VONTRON.COM

    You might also like