Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    RE3012-500 v2.0 (22) 1

    Uploaded by

    Lam Phi
    This document provides specifications for a high flow RO element for residential use. It has a permeate flow rate of 500 GPD and 97% NaCl rejection. It lists dimensions, operating limits, and general handling procedures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RE3012-500 v2.0 (22) 1

    Uploaded by

    Lam Phi
    10 views1 page
    This document provides specifications for a high flow RO element for residential use. It has a permeate flow rate of 500 GPD and 97% NaCl rejection. It lists dimensions, operating limits, and general handling procedures.

    Original Description:

    CSM 500

    Original Title

    RE3012-500_v2.0(22)_1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a high flow RO element for residential use. It has a permeate flow rate of 500 GPD and 97% NaCl rejection. It lists dimensions, operating limits, and general handling procedures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views1 page

    RE3012-500 v2.0 (22) 1

    Uploaded by

    Lam Phi
    This document provides specifications for a high flow RO element for residential use. It has a permeate flow rate of 500 GPD and 97% NaCl rejection. It lists dimensions, operating limits, and general handling procedures.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    RE3012-500

    High flow RO element for residential use

    SPECIFICATIONS
    General Features
    Permeate Flow Rate GPD (L/Day) 500 GPD (1,893L/day)
    NaCl Rejection % 97% (Minimum 95%)
    Membrane Type Thin-Film Composite
    Membrane Material Polyamide (PA)
    Element Configuration Spiral-Wound, Tape Wrapping
    The stated product performance is based on data taken after 30 minutes of operation at the following test Conditions: 200 mg/L NaCl solution at 80
    psig (0.55 MPa) applied pressure; 40% recovery; 77℉ (25℃); pH 6.5–7.0; Permeate flow rate for each element may vary +25 / -15%; Minimum salt
    rejection is 95.0%; All elements are vacuum leak tested using the CSM integrity test; Elements can be supplied as dry or wet-type. Wet-tested elements
    are soaked in a preservative solution (1.0% food grade SBS) and vacuum sealed in a poly bag. All elements are individually boxed.

    Dimensions
    Model Name A B C D E
    0.67 inch 0.39 inch 11.73 inch 0.79 inch 2.95 inch
    RE3012-500
    (17 mm) (10 mm) (298 mm) (20 mm) (75 mm)

    APPLICATION DATA
    Operating Limits
    Max. Operating Pressure 150 psi (1.03 MPa)
    Max. Feed Flow Rate 2 gpm (0.45 m3/hr)
    Max. Operating Temperature 113oF (45oC)
    Operating pH Range 2.0 – 11.0
    Max. Turbidity 1.0 NTU
    Max. SDI (15 min) 3.0
    Max. Chlorine Concentration < 0.1 mg/L

    GENERAL HANDLING PROCEDURES


     Elements contained in the boxes must be kept dry at room  Avoid excessive pressure and flow spikes.
    temperature (7–32°C; 40–95°F) and should not be stored in  Only use chemicals compatible with the membrane elements and
    direct sunlight. components. Use of such chemicals may void the element limited
     For WET-TYPE, the preservative solution (1% sodium warranty.
    metabisulfite solution) is added to prohibit the growth of  Permeate pressure must always be equal or less than the
    micro-organisms. feed/concentrate pressure. Damage caused by permeate back
     Permeate from the first hour of operation should be discarded. pressure voids the element limited warranty.
     Stabilized salt rejection is generally achieved within 1~48 hours
    of continuous use.
     Keep elements moist at all times after initial wetting.

    Toray Advanced Materials Korea Inc.


    For more information on our products, company and regional contacts, please visit our website at www.csmfilter.com.
    Product Specification Sheet / Model RE3012-500 V.2.0 (22)

    You might also like