Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    ESPA2-LD-4040: Specified Performance

    Uploaded by

    Jesus Selasor
    This document summarizes the specifications and performance of the ESPA2-LD-4040 reverse osmosis membrane element. Key specifications include a permeate flow rate of 2,000 gpd, salt rejection of 99.6%, and active membrane area of 80 ft2. The element is to be operated at 150 psig applied pressure, 77°F temperature, and a pH range of 6.5-7.0. It has a maximum operating pressure of 600 psig and temperature of 113°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ESPA2-LD-4040: Specified Performance

    Uploaded by

    Jesus Selasor
    21 views1 page
    This document summarizes the specifications and performance of the ESPA2-LD-4040 reverse osmosis membrane element. Key specifications include a permeate flow rate of 2,000 gpd, salt rejection of 99.6%, and active membrane area of 80 ft2. The element is to be operated at 150 psig applied pressure, 77°F temperature, and a pH range of 6.5-7.0. It has a maximum operating pressure of 600 psig and temperature of 113°F.

    Original Description:

    Ficha tecnica

    Original Title

    ESPA2-LD-4040

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications and performance of the ESPA2-LD-4040 reverse osmosis membrane element. Key specifications include a permeate flow rate of 2,000 gpd, salt rejection of 99.6%, and active membrane area of 80 ft2. The element is to be operated at 150 psig applied pressure, 77°F temperature, and a pH range of 6.5-7.0. It has a maximum operating pressure of 600 psig and temperature of 113°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views1 page

    ESPA2-LD-4040: Specified Performance

    Uploaded by

    Jesus Selasor
    This document summarizes the specifications and performance of the ESPA2-LD-4040 reverse osmosis membrane element. Key specifications include a permeate flow rate of 2,000 gpd, salt rejection of 99.6%, and active membrane area of 80 ft2. The element is to be operated at 150 psig applied pressure, 77°F temperature, and a pH range of 6.5-7.0. It has a maximum operating pressure of 600 psig and temperature of 113°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ESPA2-LD-4040

    Specified Performance* ______________________________


    Permeate Flow: 2,000 gpd (7.57 m3/d)
    Salt Rejection: 99.6% (99.4% minimum)

    Test Conditions: 1500 ppm NaCl solution


    150 psig (1.03 MPa) Applied Pressure
    77 F (25 C) Operating Temperature
    15% Permeate Recovery
    6.5 - 7.0 pH Range

    *The Specified Performance is based on data taken after a minimum of 10 minutes of operation. Actual testing of elements may be done at
    conditions which vary from these exact values; in which case, the performance is normalized back to these standard conditions. Permeate flow
    for individual elements may vary + or -20 percent from the value specified.

    General Product Description** ______________________________


    Configuration: Low Fouling Spiral Wound
    Membrane Polymer: Composite Polyamide
    Membrane Active Area**: 80 ft2 (7.43 m2)
    Feed Spacer: 34 mil (0.86 mm)

    Packaging: All membrane elements are supplied with a brine seal, interconnector, and O-rings. Elements are enclosed in a sealed
    polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then packaged in a cardboard box.

    A
    C
    B PERMEATE
    FEED
    CONCENTRATE

    Element Details**
    A, inches (mm) B, inches (mm) C, inches (mm)
    40.0 (1016) 3.95 (100.3) 0.75 (19.1)

    Core tube extension = 1.05" (26.7 mm)

    **Values listed are indicative, not specified. For more detailed specifications, see our Technical Service Bulletin documents or contact
    Hydranautics Technical Department.

    Product Use and Restrictions^ ______________________________


    Maximum Applied Pressure: 600 psig (4.14 MPa)
    Maximum Chlorine Concentration: < 0.1 ppm
    Maximum Operating Temperature: 113 F (45 C)
    pH Range, Continuous (Cleaning): 2-10.6 (1-12)
    Maximum Feedwater Turbidity: 1.0 NTU
    Maximum Feedwater SDI (15 mins): 5.0
    Maximum Feed Flow: 16 gpm (3.6 m3/h)
    Minimum Brine Flow: 3 gpm (0.7 m3/h)
    Maximum Pressure Drop for Each Element: 15 psi (0.10 MPa)

    ^ The limitations shown here are for general use. For specified projects, operation at more conservative values may ensure the best
    performance and longest life of the membrane. See Hydranautics Technical Bulletins for more details.

    Disclaimer: The information and data are presented in good faith and in lieu of all warranties. All express or implied warranties, including the warranties of
    merchantability and fitness for a particular purpose, are hereby disclaimed and excluded. Conditions and methods of use of our products are beyond our control.
    Hydranautics assumes no liability for results obtained or damages incurred through the application of the presented information and data. It is the user's
    responsibility to determine the appropriateness of Hydranautics' products for the user's specific end uses. 12/5/18

    Hydranautics Corporate office


    401 Jones Road, Oceanside, CA 92058, USA Toll Free: +1-800-CPA-PURE Tel: +1-760-901-2500 Fax: +1-760-901-2578
    Web: www.membranes.com Email: hy-info@nitto.com

    You might also like