Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Esna1 LF2 LD 4040

    Uploaded by

    Soledad Ortega
    This document provides specifications for the ESNA1-LF2-LD-4040 membrane element from Hydranautics. It can process 2,000 gallons per day with a calcium chloride rejection rate of 90% minimum and 95% maximum. It has a low fouling spiral wound configuration with a polyamide composite membrane and maximum operating pressures up to 600 pounds per square inch. Performance is based on testing with 500 parts per million calcium chloride solution at 75 pounds per square inch pressure and 77 degrees Fahrenheit.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Esna1 LF2 LD 4040

    Uploaded by

    Soledad Ortega
    29 views1 page
    This document provides specifications for the ESNA1-LF2-LD-4040 membrane element from Hydranautics. It can process 2,000 gallons per day with a calcium chloride rejection rate of 90% minimum and 95% maximum. It has a low fouling spiral wound configuration with a polyamide composite membrane and maximum operating pressures up to 600 pounds per square inch. Performance is based on testing with 500 parts per million calcium chloride solution at 75 pounds per square inch pressure and 77 degrees Fahrenheit.

    Original Title

    ESNA1-LF2-LD-4040

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the ESNA1-LF2-LD-4040 membrane element from Hydranautics. It can process 2,000 gallons per day with a calcium chloride rejection rate of 90% minimum and 95% maximum. It has a low fouling spiral wound configuration with a polyamide composite membrane and maximum operating pressures up to 600 pounds per square inch. Performance is based on testing with 500 parts per million calcium chloride solution at 75 pounds per square inch pressure and 77 degrees Fahrenheit.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    29 views1 page

    Esna1 LF2 LD 4040

    Uploaded by

    Soledad Ortega
    This document provides specifications for the ESNA1-LF2-LD-4040 membrane element from Hydranautics. It can process 2,000 gallons per day with a calcium chloride rejection rate of 90% minimum and 95% maximum. It has a low fouling spiral wound configuration with a polyamide composite membrane and maximum operating pressures up to 600 pounds per square inch. Performance is based on testing with 500 parts per million calcium chloride solution at 75 pounds per square inch pressure and 77 degrees Fahrenheit.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Membrane Element ESNA1-LF2-LD-4040

    (Low Fouling Technology)


    3
    Performance: Permeate Flow: 2,000 gpd (7.6 m /d)
    CaCl 2 Rejection: 90%
    CaCl 2 Rejection (minimum/maximum) 85% / 95%
    * Expected calcium rejection for a typical 500 ppm well water is 96% at 13 gfd operating flux and 25ºC.

    Type Configuration: Low Fouling Spiral Wound


    Membrane Polymer: Composite Polyamide
    2 2
    Membrane Active Area: 80 ft (7.43 m )
    Feed Spacer: 34 mil (0.864 mm)

    Application Data* Maximum Applied Pressure: 600 psig (4.14 MPa)


    Maximum Chlorine Concentration: < 0.1 PPM
    Maximum Operating Temperature: 113 °F (45 °C)
    pH Range, Continuous (Cleaning): 2-10 (2-12)*
    Maximum Feedwater Turbidity: 1.0 NTU
    Maximum Feedwater SDI (15 mins): 5.0
    3
    Maximum Feed Flow: 16 GPM (3.6 m /h)
    Minimum Ratio of Concentrate to
    Permeate Flow for any Element: 5:1
    Maximum Pressure Drop for Each Element: 15 psi
    * The limitations shown here are for general use. For specific projects, operating at more conservative values may
    ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail
    on operation limits, cleaning pH, and cleaning temperatures.

    Test Conditions
    The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

    500 ppm CaCl 2


    75 psi (0.52 MPa) Applied Pressure
    77 °F (25 °C) Operating Temperature
    15% Permeate Recovery
    6.5 – 7.0 Feed pH

    A
    C
    B PERMEATE
    FEED
    CONCENTRATE

    A, inches (mm) B, inches (mm) C, inches (mm) Weight, lbs. (kg)


    40.00 (1016) 3.95 (100.3) 0.75 (19.1) 8 (3.6)
    Core tube extension = 1.05" (26.7 mm)

    Notice: Permeate flow for individual elements may vary -20 or +25 percent. All membrane elements are supplied with a brine seal, interconnector, and o-rings. Elements
    are enclosed in a sealed polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then packaged in a cardboard box.

    Hydranautics believes the information and data contained herein to be accurate and useful. The information and data are offered in good faith, but without guarantee, as
    conditions and methods of use of our products are beyond our control. Hydranautics assumes no liability for results obtained or damages incurred through the application of the
    9presented information and data. It is the user's responsibility to determine the appropriateness of Hydranautics' products for the user's specific end uses. 3/17/16

    Hydranautics Corporate: 401 Jones Road, Oceanside, CA 92058


    1-800-CPA-PURE Phone: 760-901-2500 Fax: 760-901-2578 info@Hydranautics.com

    You might also like