Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    RE2812-CE v2.0 (22) 1

    Uploaded by

    LưuVănViết
    This document provides specifications for an innovative chlorine resistant reverse osmosis membrane element for residential use. The element has a permeate flow rate of 220 GPD and 97% NaCl rejection. It also lists dimensions, operating limits, general handling procedures, and contact information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RE2812-CE v2.0 (22) 1

    Uploaded by

    LưuVănViết
    3 views1 page
    This document provides specifications for an innovative chlorine resistant reverse osmosis membrane element for residential use. The element has a permeate flow rate of 220 GPD and 97% NaCl rejection. It also lists dimensions, operating limits, general handling procedures, and contact information.

    Original Title

    RE2812-CE_v2.0(22)_1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an innovative chlorine resistant reverse osmosis membrane element for residential use. The element has a permeate flow rate of 220 GPD and 97% NaCl rejection. It also lists dimensions, operating limits, general handling procedures, and contact information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views1 page

    RE2812-CE v2.0 (22) 1

    Uploaded by

    LưuVănViết
    This document provides specifications for an innovative chlorine resistant reverse osmosis membrane element for residential use. The element has a permeate flow rate of 220 GPD and 97% NaCl rejection. It also lists dimensions, operating limits, general handling procedures, and contact information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    RE2812-CE

    Innovative chlorine resistant RO element for residential use

    SPECIFICATIONS
    General Features
    Permeate Flow Rate GPD (L/Day) 220 GPD (833L/day)
    NaCl Rejection % 97% (Minimum 90%)
    Membrane Type Thin-Film Composite
    Membrane Material Polyamide (PA)
    Element Configuration Spiral-Wound, Tape Wrapping
    The stated product performance is based on data taken after 30 minutes of operation at the following test Conditions: 200 mg/L NaCl solution at 60
    psig (0.41 MPa) applied pressure; 15% recovery; 77℉ (25℃); pH 6.5–7.0; Permeate flow rate for each element may vary +20 / -20%; Minimum salt
    rejection is 90.0%; All elements are vacuum leak tested using the CSM integrity test; Elements can be supplied as dry or wet-type. Wet-tested elements
    are soaked in a preservative solution (1.0% food grade SBS) and vacuum sealed in a poly bag. All elements are individually boxed.

    Dimensions
    Model Name A B C D E
    0.67 inch 0.87 inch 11.73 inch 0.87 inch 2.93 inch
    RE2812-CE
    (17 mm) (22 mm) (298 mm) (22 mm) (74.5 mm)

    APPLICATION DATA
    Operating Limits
    Max. Operating Pressure 150 psi (1.03 MPa)
    Max. Feed Flow Rate 2 gpm (0.45 m3/hr)
    Max. Operating Temperature 113oF (45oC)
    Operating pH Range 2.0 – 11.0
    Max. Turbidity 1.0 NTU
    Max. SDI (15 min) 3.0
    Max. Chlorine Concentration < 0.1 mg/L

    GENERAL HANDLING PROCEDURES


     Elements contained in the boxes must be kept dry at room  Avoid excessive pressure and flow spikes.
    temperature (7–32°C; 40–95°F) and should not be stored in  Only use chemicals compatible with the membrane elements and
    direct sunlight. components. Use of such chemicals may void the element limited
     For WET-TYPE, the preservative solution (1% sodium warranty.
    metabisulfite solution) is added to prohibit the growth of  Permeate pressure must always be equal or less than the
    micro-organisms. feed/concentrate pressure. Damage caused by permeate back
     Permeate from the first hour of operation should be discarded. pressure voids the element limited warranty.
     Stabilized salt rejection is generally achieved within 1~48 hours
    of continuous use.
     Keep elements moist at all times after initial wetting.

    Toray Advanced Materials Korea Inc.


    For more information on our products, company and regional contacts, please visit our website at www.csmfilter.com.
    Product Specification Sheet / Model RE2812-CE V.2.0 (22)

    You might also like