Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    NE4040-40 v2.3 (23) 1

    Uploaded by

    Andri Sanjaya Sembiring
    This document provides specifications for the NE4040-40 nanofiltration membrane element. It has the following key features: - High selectivity allowing it to reject multivalent ions like magnesium and calcium sulfate while allowing monovalent ions like sodium and chloride to pass through at a rate of 20-40%. - It has an effective membrane area of 85 square feet and is spiral-wound inside a fiberglass reinforced plastic wrapping. - It is intended for use in food, municipal, and water reuse applications to partially soften water and reduce hardness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    NE4040-40 v2.3 (23) 1

    Uploaded by

    Andri Sanjaya Sembiring
    20 views2 pages
    This document provides specifications for the NE4040-40 nanofiltration membrane element. It has the following key features: - High selectivity allowing it to reject multivalent ions like magnesium and calcium sulfate while allowing monovalent ions like sodium and chloride to pass through at a rate of 20-40%. - It has an effective membrane area of 85 square feet and is spiral-wound inside a fiberglass reinforced plastic wrapping. - It is intended for use in food, municipal, and water reuse applications to partially soften water and reduce hardness.

    Original Description:

    NE4040-40

    Original Title

    NE4040-40_v2.3(23)_1 (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the NE4040-40 nanofiltration membrane element. It has the following key features: - High selectivity allowing it to reject multivalent ions like magnesium and calcium sulfate while allowing monovalent ions like sodium and chloride to pass through at a rate of 20-40%. - It has an effective membrane area of 85 square feet and is spiral-wound inside a fiberglass reinforced plastic wrapping. - It is intended for use in food, municipal, and water reuse applications to partially soften water and reduce hardness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views2 pages

    NE4040-40 v2.3 (23) 1

    Uploaded by

    Andri Sanjaya Sembiring
    This document provides specifications for the NE4040-40 nanofiltration membrane element. It has the following key features: - High selectivity allowing it to reject multivalent ions like magnesium and calcium sulfate while allowing monovalent ions like sodium and chloride to pass through at a rate of 20-40%. - It has an effective membrane area of 85 square feet and is spiral-wound inside a fiberglass reinforced plastic wrapping. - It is intended for use in food, municipal, and water reuse applications to partially soften water and reduce hardness.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    NE4040-40

    High productivity NF element with low monovalent ion rejection

     High Mono/Multivalent Ion Selectivity


     High Hardness Rejection
     Low Energy Consumption

    Food Municipal Water Reuse

    SPECIFICATIONS
    General Features
    3
    Permeate Flow Rate 2,500 GPD (9.5 m /day)

    MgSO4 Rejection 99.0% (Minimum 98.0%)


    NaCl Rejection 20 – 40%
    2 2
    Effective Membrane Area 85 ft (7.9 m )

    Membrane Type Thin-Film Composite


    Membrane Material Polyamide (PA)
    Element Configuration Spiral-Wound, FRP Wrapping
    Test Conditions: 2,000 mg/L MgSO4 or NaCl solution at 75 psig (0.52 MPa) applied pressure; 15% recovery; 77℉(25℃);
    pH 6.5–7.0; Permeate flow rate for each element may vary +25 / -25%.

    Dimensions and Weight


    Part Number
    Model Name A B C D/E
    Inter-Connector Brine Seal
    40.0 inch 3.9 inch 0.75 inch 1.05 inch
    NE4040-40 SWA01050 SWA01046
    (1,016 mm) (99.0 mm) (19.1 mm) (26.7 mm)

    1. Each membrane element supplied with one interconnector (coupler) and four O-rings.
    2. All NE4040 elements fit nominal 4.0 inch (101.6 mm) I.D. pressure vessels.

    Toray Advanced Materials Korea Inc.


    For more information on our products, company and regional contacts, please visit our website at www.csmfilter.com.
    Product Specification Sheet / Model NE4040-40
    V.2.3 (23)

    Page 1 of 2
    NE4040-40
    High productivity NF element with low monovalent ion rejection

    APPLICATION DATA
    Operating Limits
    Max. Pressure Drop / Element 15 psi (0.10 MPa)
    Max. Pressure Drop / 240” Vessel 60 psi (0.41 MPa)
    Max. Operating Pressure 600 psi (4.14 MPa)
    Max. Feed Flow Rate 18 gpm (4.09 m3/hr)
    Min. Concentrate Flow Rate 4 gpm (0.91 m3/hr)
    Max. Operating Temperature 113oF (45oC)
    Operating pH Range 3.0 – 10.0
    CIP pH Range 2.0 – 11.0
    Max. Turbidity 1.0 NTU
    Max. SDI (15 min) 5.0
    Max. Chlorine Concentration < 0.1 mg/L

    GENERAL HANDLING PROCEDURES


     Elements contained in the boxes must be kept dry  Avoid excessive pressure and flow spikes.
    at room temperature (7–32°C; 40–95°F) and should
    not be stored in direct sunlight.  Only use chemicals compatible with the membrane
    elements and components. Use of such chemicals
     Permeate from the first hour of operation should may void the element limited warranty.
    be discarded.
     Permeate pressure must always be equal or less than
     Stabilized salt rejection is generally achieved within the feed/concentrate pressure. Damage caused by
    1~48 hours of continuous use. permeate back pressure voids the element limited
    warranty.
     Keep elements moist at all times after initial
    wetting.  The element shell is FRP(Fiber Reinforced Plastic). Be
    aware of glass fiber strands and use safety equipment.

    Certified to
    NSF/ANSI/CAN 61

    Toray Advanced Materials Korea Inc.


    For more information on our products, company and regional contacts, please visit our website at www.csmfilter.com.
    Product Specification Sheet / Model NE4040-40
    V.2.3 (23)
    Page 2 of 2

    You might also like