Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 26 views

    Vontronfr12 8040en1

    Uploaded by

    Von Tron
    This document summarizes the specifications and operating conditions of the VONTRON FR12-8040 membrane element. The membrane element has an active surface area of 400 square feet, can process 10,500 gallons per day, and has a salt rejection rate of 99.5%. It is suitable for treating water with total dissolved solids under 10,000 ppm, and is used to purify surface, mine, municipal, and industrial wastewaters. The membrane element has standardized operating limits for pressure, flow rates, pH, chlorine levels, and temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Vontronfr12 8040en1

    Uploaded by

    Von Tron
    26 views2 pages
    This document summarizes the specifications and operating conditions of the VONTRON FR12-8040 membrane element. The membrane element has an active surface area of 400 square feet, can process 10,500 gallons per day, and has a salt rejection rate of 99.5%. It is suitable for treating water with total dissolved solids under 10,000 ppm, and is used to purify surface, mine, municipal, and industrial wastewaters. The membrane element has standardized operating limits for pressure, flow rates, pH, chlorine levels, and temperature.

    Original Description:

    Data sheet

    Original Title

    VONTRONFR12-8040EN1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications and operating conditions of the VONTRON FR12-8040 membrane element. The membrane element has an active surface area of 400 square feet, can process 10,500 gallons per day, and has a salt rejection rate of 99.5%. It is suitable for treating water with total dissolved solids under 10,000 ppm, and is used to purify surface, mine, municipal, and industrial wastewaters. The membrane element has standardized operating limits for pressure, flow rates, pH, chlorine levels, and temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    26 views2 pages

    Vontronfr12 8040en1

    Uploaded by

    Von Tron
    This document summarizes the specifications and operating conditions of the VONTRON FR12-8040 membrane element. The membrane element has an active surface area of 400 square feet, can process 10,500 gallons per day, and has a salt rejection rate of 99.5%. It is suitable for treating water with total dissolved solids under 10,000 ppm, and is used to purify surface, mine, municipal, and industrial wastewaters. The membrane element has standardized operating limits for pressure, flow rates, pH, chlorine levels, and temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    VONTRON FR12-8040 Membrane Element

    Brief Introduction

    FR12-8040 RO Membrane Element utilizes specialized manufacture technique that can improve
    the hydrophilicity, electric charge and roughness of its surface, thus reducing the breeding and
    adsorption of pollutants and microbes on membrane surface.

    FR series of fouling resistant membranes normally suitable for treatment of complex water source
    with TDS less than 10000 ppm. It is mainly used for purification of surface water, mining waste
    water, municipal reclaimed water, industrial waste water, RO brackish water, etc.

    Active Membrane Feed Spacer


    Permeate Flow Stable Rejection
    Model Area Thickness
    GPD(m 3 /d) %
    ft 2 (m 2 ) mil

    FR12-8040 400（37.2） 10500（39.7） 99.5 34

    Operating pressure 225 psi (1.55MPa)


    Temperature at 25℃
    Testing Tested at 2000mg/L NaCl solution
    Conditions pH 7.0 ± 0.5
    Recovery rate at 15%
    Maximum operating pressure 600psi（4.14MPa）
    Maximum feedwater flow 75gpm（17 m 3 /h）
    Maximum feedwater temperature 45℃
    Operation
    Maximum feedwater flow SDI 15 5
    Limits & Allowed pH range for feedwater in operation 2～11
    Allowed pH range for chemical cleaning 1～13
    Conditions
    Maximum concentration of free chlorine ＜0.1ppm
    Maximum pressure drop per element 15psi（0.1Mpa）

    Size of Membrane Element：1.0 inch =25.4 mm

    A/mm(inch) B/mm(inch) C/mm(inch)


    1016 (40) 201 (7.9) 29 (1.125)

    WWW.VONTRON.COM
    Notice:

    1. All data and information provided in this manual have been obtained from long-term
    experiment by Vontron. We confirm the effective and accuracy of the data. We assume no liability
    for any consequences of user’s failure in abiding the conditions specified in this manual in use or
    maintenance of membrane products. It is strongly recommended that the user shall strictly abide
    the designed use and maintenance requirements and keep relevant records.
    2. The permeate value listed in the table is the average value. The permeate flow of single
    membrane element is tolerance not exceeding ±15% of the nominal value.
    3. All wet-type membrane elements have been strictly tested before leaving the factory, and
    have been treated with 1.0% sodium hydrogen sulfite (10% glycerin antifreeze required in winter)
    for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes.
    4. The membrane used should remain wet after being used; In long term suspension, to prevent
    the breeding of microbes, soak the membrane elements with protective solution is highly
    recommended, the solution (prepared with RO filtered water) containing 1.0% sodium hydrogen
    sulfite (food grade).
    5. Operate low pressure flushing for 15-25 minutes of first use, high pressure flushing for 60-90
    minutes when first use (Permeate flow no less than 50% of designed flow). Discard all the
    permeate and concentrated water produced during the first one hour after system start-up.
    6. During storage and operation period, it is strictly prohibited to add any chemicals that may be
    harmful to membrane elements. In case of any violation in adding chemicals, Vontron assumes no
    liabilities for any damages incurred.
    7. Along with technical development and product renovation, all information will be subject to
    modification without prior notification. Please keep notice the website of Vontron for any updates
    of the product.

    WWW.VONTRON.COM

    You might also like