Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Works and Equipment For Bus Reactor Installation

    Uploaded by

    Muhammad Aftabuzzaman
    The document discusses works and equipment required for the installation of a bus reactor at the Bogura 400kV substation in Bangladesh. It includes: 1) An EMTP study to determine the size, rating, and location of the bus reactor and lightning arrestors, as well as switching surge analysis. 2) A 420MVAR shunt reactor for initial bidding purposes, with the final size determined by the EMTP study. 3) Three 390kV surge arrestors. 4) Control, protection, monitoring and automation systems for the bus reactor. 5) Rigid tubular bus, flexible conductors, insulators and fittings for the 420kV busbar and switchgear connection.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Works and Equipment For Bus Reactor Installation

    Uploaded by

    Muhammad Aftabuzzaman
    35 views2 pages
    The document discusses works and equipment required for the installation of a bus reactor at the Bogura 400kV substation in Bangladesh. It includes: 1) An EMTP study to determine the size, rating, and location of the bus reactor and lightning arrestors, as well as switching surge analysis. 2) A 420MVAR shunt reactor for initial bidding purposes, with the final size determined by the EMTP study. 3) Three 390kV surge arrestors. 4) Control, protection, monitoring and automation systems for the bus reactor. 5) Rigid tubular bus, flexible conductors, insulators and fittings for the 420kV busbar and switchgear connection.

    Original Description:

    EMTP requirement

    Original Title

    EMTP

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses works and equipment required for the installation of a bus reactor at the Bogura 400kV substation in Bangladesh. It includes: 1) An EMTP study to determine the size, rating, and location of the bus reactor and lightning arrestors, as well as switching surge analysis. 2) A 420MVAR shunt reactor for initial bidding purposes, with the final size determined by the EMTP study. 3) Three 390kV surge arrestors. 4) Control, protection, monitoring and automation systems for the bus reactor. 5) Rigid tubular bus, flexible conductors, insulators and fittings for the 420kV busbar and switchgear connection.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    35 views2 pages

    Works and Equipment For Bus Reactor Installation

    Uploaded by

    Muhammad Aftabuzzaman
    The document discusses works and equipment required for the installation of a bus reactor at the Bogura 400kV substation in Bangladesh. It includes: 1) An EMTP study to determine the size, rating, and location of the bus reactor and lightning arrestors, as well as switching surge analysis. 2) A 420MVAR shunt reactor for initial bidding purposes, with the final size determined by the EMTP study. 3) Three 390kV surge arrestors. 4) Control, protection, monitoring and automation systems for the bus reactor. 5) Rigid tubular bus, flexible conductors, insulators and fittings for the 420kV busbar and switchgear connection.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    IIIA Works and Equipment for Bus Reactor Installation

    The works for Bus reactor shall comply with Section 16 of the Technical Specification
    and the particular requirements as detailed in the Schedule of Technical Requirements
    included as Appendix A1 to this section and shall comprise the following:-
    1.IIIA1 EMTP study (for 400kV Bogura Substation) shall be performed by the contractor through
    Independent Expert with consent of Employer and shall include the following aspects but are
    not limited to
    i. to determine the requirement and the size of the Bus reactor at Bogura (W)
    400kV Bus and resonance phenomena for Bogura (W) 400kV Substation.
    ii. to determine the requirement, rating (kV, kJ, kA etc.),location and the number
    of lighting arrester at Bogura 400kV switchyard
    iii. to determine the value of Pre Insertion Resistor
    iv. Switching Over Voltage study of Bogura-Rahanpur 400 kV Line
    v. Iinsulation co-ordination with detail surge arrester modelling and requirements
    for Point-on-Wave device and PIRs for each busbar.
    vi. Switching surge analysis for 400 kV Bogura (W) Substation
    – Re-closing time determination
    - Closing/Re-closing Over Voltage study
    - TRV analysis for circuit breaker
    The EMTP study shall have to be performed using PSCAD software and shall include training
    of six (06) Design Engineers of the Employer for two (2) weeks regarding the use of PSCAD
    software for typical EMTP study including/having example of the said EMTP study under this
    project. Soft copy with detail EMTP report & psacd files shall have to be submittedto Employer
    during execution work.
    1.IIIA2 Four (4) sets of 420 kV, Size: 125MVAR (only for Bid purpose, the final size shall be as per
    the EMTP study to be done by the Contractor) (ONAN), three phase outdoor type Shunt
    Reactor as specified in the technical specifications of this Section. It is to be mentioned that,
    for change in MVar size of Shunt Reactor during execution based on EMTP study, the price
    shall be adjusted as follows:
    𝑵𝒆𝒘 𝑺𝒊𝒛𝒆
    𝑷𝑵 = 𝟐𝟎% × 𝑷𝟎 ± 𝟖𝟎% × 𝑷𝟎 × ;
    𝑶𝒍𝒅 𝑺𝒊𝒛𝒆
    𝑊ℎ𝑒𝑟𝑒,
    𝑃𝑁 = 𝑁𝑒𝑤 𝑝𝑟𝑖𝑐𝑒 , 𝑃0 = 𝑂𝑟𝑖𝑔𝑖𝑛𝑎𝑙 𝑝𝑟𝑖𝑐𝑒 (𝐶𝑜𝑟𝑟𝑒𝑐𝑡𝑒𝑑 𝐵𝑖𝑑 𝑝𝑟𝑖𝑐𝑒)

    1.IIIA3 Deleted

    1.IIIA4 Three (03) no. of 390kV rated voltage, 303kV(rms) continuous operating voltage at 50oC, 10kA
    nominal discharge current, 50Hz, gapless metal oxide type, single phase surge arrestors

    1.IIIA5 Control, Protection, Monitoring & Substation Automation System including event recording
    function for Bus Reactor as specified in the technical specifications and bid drawings of
    Volume 2 of 3 of the Bidding Document)

    1.IIIA6 One (1) lot of rigid tubular bus [Aluminium of grade 63401 WP], flexible conductors, insulators,
    fittings including all necessary clamps and connectors required for completing 420kV busbar
    and switchgear connection for Bus Reactor bay as specified in the technical specifications and
    bid drawings of Volume 2 of 3 of the Bidding Document
    1.IIIA7 One (1) lot of steel structures for gantry, equipment supports and civil works required for com
    pleting 420kV busbar and switchgear for Bus Reactor bay as specified in the technical
    specification and bid drawings of Volume 2 of 3 of the Bidding Document.

    You might also like