PV Elite 2014 Licensee: SPLM Licensed User

FileName : 5401B06 Page 2

Input Echo : Step: 1 4:05p Nov 19,2017

PV Elite Vessel Analysis Program: Input Data

Design Internal Pressure (for Hydrotest) 100.00 psig

Design Internal Temperature 200 �F

Type of Hydrotest UG-99(b)

Hydrotest Position Horizontal

Projection of Nozzle from Vessel Top 0.0000 in.

Projection of Nozzle from Vessel Bottom 0.0000 in.

Minimum Design Metal Temperature -20 �F

Type of Construction Welded

Special Service None

Degree of Radiography RT 1

Miscellaneous Weight Percent 0.0

Use Higher Longitudinal Stresses (Flag) Y

Select t for Internal Pressure (Flag) N

Select t for External Pressure (Flag) N

Select t for Axial Stress (Flag) N

Select Location for Stiff. Rings (Flag) N

Consider Vortex Shedding Y

Perform a Corroded Hydrotest N

Is this a Heat Exchanger No

User Defined Hydro. Press. (Used if > 0) 0.0000 psig

User defined MAWP 0.0000 psig

User defined MAPnc 0.0000 psig

Load Case 2 NP+EW+EE+FS+BS

Load Case 3 NP+OW+WI+FW+BW

Load Case 4 NP+OW+EQ+FS+BS

Load Case 5 NP+HW+HI

Load Case 6 NP+HW+HE

Load Case 7 IP+OW+WI+FW+BW

Load Case 8 IP+OW+EQ+FS+BS

Load Case 9 EP+OW+WI+FW+BW

Load Case 10 EP+OW+EQ+FS+BS

Load Case 11 HP+HW+HI

Load Case 12 HP+HW+HE

Load Case 13 IP+WE+EW

Load Case 14 IP+WF+CW

Load Case 15 IP+VO+OW

Load Case 16 IP+VE+EW

Load Case 17 NP+VO+OW

Load Case 18 FS+BS+IP+OW

Load Case 19 FS+BS+EP+OW

Wind Design Code ASCE-7 93

Basic Wind Speed [V] 70.000 mile/hr

Surface Roughness Category C: Open Terrain

Importance Factor 1.0

Type of Surface Moderately Smooth

Base Elevation 0.0000 ft.

FileName : 5401B06 Page 3

Input Echo : Step: 1 4:05p Nov 19,2017

Percent Wind for Hydrotest 33.0

Using User defined Wind Press. Vs Elev. N

Damping Factor (Beta) for Wind (Ope) 0.0100

Damping Factor (Beta) for Wind (Empty) 0.0000

Damping Factor (Beta) for Wind (Filled) 0.0000

Seismic Design Code UBC 94

UBC Seismic Zone (1=1,2=2a,3=2b,4=3,5=4) 0.000

UBC Importance Factor 1.000

UBC Soil Type S1

UBC Horizontal Force Factor 3.000

UBC Percent Seismic for Hydrotest 0.000

Design Nozzle for Des. Press. + St. Head Y

Consider MAP New and Cold in Noz. Design N

Consider External Loads for Nozzle Des. Y

Use ASME VIII-1 Appendix 1-9 N

Material Database Year Current w/Addenda or Code Year

Configuration Directives:

Do not use Nozzle MDMT Interpretation VIII-1 01-37 No

Use Table G instead of exact equation for "A" Yes

Shell Head Joints are Tapered Yes

Compute "K" in corroded condition Yes

Use the MAWP to compute the MDMT Yes

Using Metric Material Databases, ASME II D No

Complete Listing of Vessel Elements and Details:

Element From Node 10

Element To Node 20

Element Type Torisphe.

Description

Distance "FROM" to "TO" 0.2500 ft.

Inside Diameter 23.622 in.

Element Thickness 0.2500 in.

Internal Corrosion Allowance 0.0000 in.

Nominal Thickness 0.0000 in.

External Corrosion Allowance 0.0000 in.

Design Internal Pressure 87.023 psig

Design Temperature Internal Pressure 428 �F

Design External Pressure 29.007 psig

Design Temperature External Pressure 428 �F

Effective Diameter Multiplier 1.2

Material Name SA-240 304L

Allowable Stress, Ambient 16700. psi

Allowable Stress, Operating 15492. psi

Allowable Stress, Hydrotest 21710. psi

Material Density 0.2900 lb./cu.in.

P Number Thickness 0.0000 in.

FileName : 5401B06 Page 4

Input Echo : Step: 1 4:05p Nov 19,2017

Yield Stress, Operating 17192. psi

External Pressure Chart Name HA-3

UNS Number S30403

Product Form Plate

Efficiency, Longitudinal Seam 0.85

Efficiency, Circumferential Seam 1.0

Tori Head Crown Radius 24.122 in.

Tori Head Knuckle Radius 1.4473 in.

--------------------------------------------------------------------

Element From Node 20

Element To Node 30

Element Type Cylinder

Description

Distance "FROM" to "TO" 2.4606 ft.

Inside Diameter 23.622 in.

Element Thickness 0.2500 in.

Internal Corrosion Allowance 0.0000 in.

Nominal Thickness 0.0000 in.

External Corrosion Allowance 0.0000 in.

Design Internal Pressure 87.023 psig

Design Temperature Internal Pressure 428 �F

Design External Pressure 29.007 psig

Design Temperature External Pressure 428 �F

Effective Diameter Multiplier 1.2

Efficiency, Longitudinal Seam 0.85

Efficiency, Circumferential Seam 1.0

--------------------------------------------------------------------

Element From Node 30

Element To Node 40

Element Type Torisphe.

Description

Distance "FROM" to "TO" 0.2500 ft.

Inside Diameter 23.622 in.

Element Thickness 0.2500 in.

Internal Corrosion Allowance 0.0000 in.

Nominal Thickness 0.0000 in.

External Corrosion Allowance 0.0000 in.

Design Internal Pressure 87.023 psig

Design Temperature Internal Pressure 428 �F

Design External Pressure 29.007 psig

Design Temperature External Pressure 428 �F

Effective Diameter Multiplier 1.2

Material Name SA-240 304L

Efficiency, Longitudinal Seam 0.85

Efficiency, Circumferential Seam 1.0

Tori Head Crown Radius 24.122 in.

Tori Head Knuckle Radius 1.4473 in.

FileName : 5401B06 Page 5

Input Echo : Step: 1 4:05p Nov 19,2017

PV Elite is a trademark of Intergraph CADWorx & Analysis Solutions, Inc. 2014