Variable Displacement Pump A7V: Extract From RE 92210/05.95
Variable Displacement Pump A7V: Extract From RE 92210/05.95
Variable Displacement Pump A7V: Extract From RE 92210/05.95
95 (Extract)
Variable displacement pump, axial piston bent axis design, for Robust roller bearings for high loads.
hydrostatic transmissions in open circuits.
The flow is proportional to the drive speed and the displacement Hydrostatic unloading of bearings possible for continous
and is steplessly variable at constant drive speed. pressures up to 350 bar.
Comprehensive program of control devices for every control and
regulating function. Operation on both mineral and fire-resistant fluids.
1
RE 92210/05.95 (Extract)
Ordering Code
Further details
A7V 1000 5.1 F in clear text
Technical Data The minimum and maximum flow is normally set at the
(theoretical values, without considering mech.-hyd. and volumetric efficiency) extreme values (Vg min and Vg max) by means of two
stop screws. If alternative values are required, please
Size 1000
indicate in clear text when ordering.
Displacement Vg max cm3 1000 These stop screws and the screw for setting
Vg min cm3 0 commencement of control are normally secured
1
against unauthorized adjustment by protective caps
Max. speed ) at Vg max n0 max 1 rpm 950 before leaving the factory.
at Vg < Vg max n0max 2 rpm 1300
Max. perm. speed (speed limit) with
n0 max perm rpm 1600 1 bar = 14.5 psi
increased inlet pressure pabs
1 cm3 = 0.061 in3
Max. flow at n0 max 1 (Vg max) Q0 max 1 L/min 950
1 L/min = 0.264 gpm
at n0 max 2 (Vg < Vg max) Q0 max 2 L/min 830
1 Nm = 0.737 lb.ft
Max. power (∆p = 350 bar) at Q0 max 1 P0 max 1 kW 554 1 Nm/bar = 0.05 lb.ft/psi
at Q0 max 2 P0 max 2 kW 485 1 kW = 1.34 HP
Torque (∆p = 100 bar) at Vg max T Nm/100 bar 1590 1 kg = 2.204 lbs
Max. torque (∆p = 350 bar) at Vg max Tmax Nm 5565 1 kgm2 = 23.73 lbs.ft2
2
Moment of inertia about the drive axis J kgm 0.824
Weight (approx.) m kg 520
1
) The values shown are valid with an absolute pressure at suction inlet S and when
operated on mineral oil. Further information see Data Sheet RE 92210