Dayananda Sagar College of Engineering
Dayananda Sagar College of Engineering
2 Analyze and construct the following incidence matrices for the oriented
connected graph is shown in fig. 1 (Select elements 5).And also name the
matrices i) K ii) B iii) C . 10
3 Analyze the given bus incidence matrix. Develop the oriented graph. Check
the following relations i) AbKT= I ii) Bl=Al KT 10
1 0 0 0 −1 0 0 1
|0 0 0 1 0 0 −1 −1|
0 1 0 0 1 1 0 0
0 0 1 0 0 −1 1 0
5
[ ]
0 −1 0
A= 0 0 −1
1 −1 0
0 1 −1
1 0 −1
a. Choose suitable matrices and Formulate an expression for formation of
Bus admittance matrix YBUS by Singular transformation.
5
b. For the system defined by the line data shown in fig. Apply inspection
method to determine the YBUS matrix.
Line Bus Admittance
No. in pu
1 1-6 J 20
2 2-6 J 35
3 2-5 J 10
4 1-3 J5
5 3-4 J 20
6 4-5 J 10
7 3-6 J 25
5
6 Select and apply a suitable method to determine the bus admittance matrix for
the system shown in fig.
10
7 Analyze the power system shown in fig. Construct the Bus impedance 10
matrix by applying building algorithm.
8 For the data given in table, Construct Ybus by applying singular
transformation. Take bus 4 as reference system data.
Lin Bus(p- Z(pu) Bus (r- Z(pu)
e q) s)
1 1-2 0.2
2 2-3 0.3 1-2 0.05 10
3 3-4 0.4
4 4-1 0.5
9 Apply building algorithm to Construct the ZBUS for the power system
network shown in fig. Connect the elements in this order 0-1, 1-2, 1-3, 0-
2 and 2-3.
10
10 Formulate the Load Flow solution procedure of GS iterative method for a
Power system having both PV and PQ buses. Also explain how 10
acceleration factors are applied at the end of each iteration.