Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    Ankur

    Uploaded by

    Ritesh Patel
    The document contains 20 multiple choice questions about CNC machine tools and manufacturing processes. It covers topics like tool angles and their effects, machining processes, CNC system components, controller types, machine axes, transmissions, and the purpose of features like automatic tool changers and feedback devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ankur

    Uploaded by

    Ritesh Patel
    40 views10 pages
    The document contains 20 multiple choice questions about CNC machine tools and manufacturing processes. It covers topics like tool angles and their effects, machining processes, CNC system components, controller types, machine axes, transmissions, and the purpose of features like automatic tool changers and feedback devices.

    Original Title

    Ankur Converted

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains 20 multiple choice questions about CNC machine tools and manufacturing processes. It covers topics like tool angles and their effects, machining processes, CNC system components, controller types, machine axes, transmissions, and the purpose of features like automatic tool changers and feedback devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    40 views10 pages

    Ankur

    Uploaded by

    Ritesh Patel
    The document contains 20 multiple choice questions about CNC machine tools and manufacturing processes. It covers topics like tool angles and their effects, machining processes, CNC system components, controller types, machine axes, transmissions, and the purpose of features like automatic tool changers and feedback devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    A single point thread cutting tool should ideally

    have
    (A) Zero rake angle
    (B) Positive rake angle
    (C) Negative rake angle
    (D) Point angle
    Ans - a

    2. Glazing in grinding wheels can be decreased by

    (A) Using a harder wheel or by increasing the wheel


    speed
    (B) Using a softer wheel or by decreasing the wheel
    speed
    (C) Using a harder wheel or by decreasing the wheel
    speed
    (D) Using a softer wheel or by increasing the wheel
    speed
    Ans - b

    3. Which of the following will give better chip flow?


    a) Positive back rake angle tool
    b) Negative back rake angle tool
    c) Zero back rake angle tool
    d) None of the mentioned

    Answer:a
    Explanation: With positive back rake angle, lip angle
    decreases and space for chip flow increases and hence
    it will give better chip flow.
    4. Which of the following will give large friction during
    chip flow?
    a) Positive back rake angle tool
    b) Negative back rake angle tool
    c) Zero back rake angle tool
    d) Small lip angle tool
    Answer:b
    Explanation: With negative back rake angle, lip angle
    increases and space for chip flow decreases due to which
    it offers large resistance to chip flow.

    5. For large positive back rake angle, tool will be


    a) Weaker
    b) Stronger
    c) Smoother
    d) Harder

    Answer:a
    Explanation: With the increase in positive back rake
    angle, lip angle decreases and tool tip become thin.
    6. For large negative back rake angle, tool will be
    a) Weaker
    b) Stronger
    c) Smoother
    d) Harder
    Answer:b
    Explanation: With an increase in negative back rake
    angle, lip angle increases and tool tip become thick and
    hence the strength of tool will increase.
    7. With an increase in rake angle of tool, tool life will
    a) Increase
    b) Decrease
    c) Remains constant
    d) First increase then decrease
    Answer:d
    Explanation: With an increase in rake angle chip flow rate
    increases and hence the heat generated is carried away
    with chips at faster rate due to which tool life increases.
    For large back rake angle, tool become very thin and its
    life decrease.
    8. What is the optimum value of positive rake angle in
    degrees for maximum tool life?
    a) 10
    b) 12
    c) 15
    d) 20
    Answer:c
    Explanation: At 15 degree chip removal rate and strength
    of tool are optimum and hence tool life will be maximum.
    9. For machining of carbide material which of the
    following tool will be preferred?
    a) Large positive rake angle tools
    b) Large negative rake angle tools
    c) Zero rake angle tools
    d) Small point angle tools
    View Answer
    Answer:b
    Explanation: Carbide materials are very hard hence
    strong tool is required for their machining. Tools with large
    negative back rake angle are stronger.
    10. CAD/CAM is the relationship between
    a) science and engineering
    b) manufacturing and marketing
    c) design and manufacturing
    d) design and marketing
    Ans - c

    11. What is meaning of CIM


    Ans – Computer Integrated Manufacturing.

    12. What is meaning of CAM


    Ans – Computer Aided Manufacturing.

    13. What is meaning of CAD.


    Ans – Computer Aided Design.

    14. Punch Tape Block is


    Ans – Rectangular

    15.
    In a CNC program block, N002 GO2 G91 X40
    Z40......, GO2 and G91 refer to
    A. Circular interpolation in counter clockwise direction
    and incremental dimension

    B. Circular interpolation in counter clockwise direction


    and absolute dimension
    C. Circular interpolation in clockwise direction and
    incremental dimension

    D. Circular interpolation in clockwise direction and


    absolute dimension

    Ans - c

    16-
    The factor responsible for the formation of
    continuous chips with built up edge is
    A. Low cutting speed and large rake angle

    B. Low cutting speed and small rake angle

    C. High cutting speed and large rake angle

    D. High cutting speed and small rake angle

    Ans - b

    17.
    In _________ operation, the cutting force is
    maximum when the tooth begins its cut and
    reduces it to minimum when the tooth leaves the
    work.
    A. Up milling

    B. Down milling

    C. Face milling
    D. End milling

    Ans - b

    19
    A twist drill is specified by its
    A. Shank, material and diameter

    B. Shank, lip angle and size of flute

    C. Material, length of body and helix angle

    D. Any one of these

    Ans - a

    20.

    The high cutting speed and large rake angle of the


    tool will result in the formation of
    A. Continuous chips

    B. Discontinuous chip

    C. Continuous chips with built up edge

    D. None of these

    Ans - a
    1. What kind of controller system is found in CNC machine tools?
    (a) Personal computer
    (b) Hardwired logic
    (c) Programmable logic controller
    (d) Microprocessor based
    Answer:
    Option (c)
    2. Which of the following system has feedback system?
    (a) Open loop system
    (b) Closed loop system
    (c) Direct loop system
    (d) None of the above
    Answer:
    Option (b)
    3. On turning lathes the machine zero point is generally at the

    (a) Head stock of lathe spindle nose face


    (b) Dead center of tail stock
    (c) Tool point mounted on tool post
    (d) none of the above
    Answer:
    Option (b)
    4. In NC (Numerical Control) machine tool, the position feedback package is connected between
    (a) control unit and programmer
    (b) programmer and machine tool
    (c) control unit and machine tool
    (d) programmer and process planning
    Answer:
    Option (c)
    5. In a point-to-point type of NC system
    (a) Control of position and velocity of the tool is essential
    (b) Control of only position of the tool is sufficient
    (c) Control of only velocity of the tool is sufficient
    (d) Neither position nor velocity need to be controlled
    Answer:
    Option (b)
    6. CNC drilling machine is considered to be a
    (a) Point-to-point controlled machine
    (b) Straight line controlled machine
    (c) Continuous path-controlled machine
    (d) Servo-controlled machine
    Answer:
    Option (a)
    7. The lost motion in CNC machine tool is on account of
    (a) Backlash in gearing
    (b) Wind-up of drive shafts
    (c) Deflection of machine tool members
    (d) All the above
    Answer:
    Option (a)
    8. The axes of turning machine are
    (a) Z and X-axes
    (b) X and Y-axes
    (c) Z and Y-axes
    (d) X, Y and Z-axes
    Answer:
    Option (a)
    9. The most preferred transmission system in CNC machining Center is
    (a) Timing belt and pulley
    (b) V-belt
    (c) Recirculating ball screw
    (d) Rack and pinion
    Answer:
    Option (c)
    10. Which one of the following CNC machines is highly suited for machining on cubical component in a si

    (a) HMC
    (b) VMC
    (c) Horizontal boring machine
    (d) Turn mill Center
    Answer:
    Option (c)
    11. The setting of tools to a specific length is called
    (a) Tool on setting
    (b) Specific setting
    (c) Pre-setting
    (d) Post setting
    Answer:
    Option (c)
    12. Spindle speed for machining centers is always specified in
    (a) Inches per revolution
    (b) RPM
    (c) Surface feet or meter per minute
    (d) Inches per minute
    Answer:
    Option (b)
    13. The axis perpendicular to work holding surface of a CNC machine is
    (a) X
    (b) Y
    (c) Z
    (d) W
    Answer:
    Option (a)
    14. What is the purpose of using recirculating ball screw nut mechanism in CNC machine?
    (a) To reduce the setup time
    (b) For higher surface finish
    (c) For carrying out up milling
    (d) To remove backlash
    Answer:
    Option (b)
    15. On which unit is the tool setting done on NC machine
    (a) On special device away from the machine
    (b) On machine itself while the other operation is being performed
    (c) On the NC machine during ideal time
    (d) On the pre-setting setting
    Answer:
    Option (d)
    16. An ATC plays a significant role in reducing
    (a) Tool change time
    (b) Idle time
    (c) Machining time
    (d) Control time
    Answer:
    Option (a)
    17. Which type of motor is not suitable for rotary axis of spindle drives of CNC machine tools?
    (a) Stepper motor
    (b) DC servo motor
    (c) Induction motor
    (d) Line servo motor
    Answer:
    Option (d)
    18. A good slideway system must possess
    (a) Low wear rate
    (b) High stiffness
    (c) Sufficient damping
    (d) All of the above
    Answer:
    Option (d)
    19. The purpose of a feedback device in a CNC machine tool is to provide information of
    (a) Force
    (b) Speed
    (c) Displacement
    (d) Both speed and displacement
    Answer:
    Option (d)
    20. The interpolation in a CNC machine tool controls
    (a) Feed rate
    (b) Spindle speed
    (c) Tool change
    (d) Coolant flow
    Answer:
    Option (a)

    You might also like