Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
495 views

Ewh Calculation

This document summarizes the hot water demand calculations for a residential building project. It refers to an application handbook to determine the hot water demand per fixture based on the type of building. The document calculates the probable maximum demand to be 15.67 mL/s and the required storage tank capacity to be 71 liters at a final temperature of 60°C based on the fixtures and their quantities. It then notes the selected storage tank is 50 liters with a 1.5 kW power requirement.

Uploaded by

Raja Ponnambalam
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
495 views

Ewh Calculation

This document summarizes the hot water demand calculations for a residential building project. It refers to an application handbook to determine the hot water demand per fixture based on the type of building. The document calculates the probable maximum demand to be 15.67 mL/s and the required storage tank capacity to be 71 liters at a final temperature of 60°C based on the fixtures and their quantities. It then notes the selected storage tank is 50 liters with a 1.5 kW power requirement.

Uploaded by

Raja Ponnambalam
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

PROJECT XXXXXX Sheet No 1of 1 Rev 0

ITEM EWH-XXXX Prepared By SV Date

PROJECT NO XXXXXX Checked By Date

REF ASHRAE APPLICATIONS HAND BOOK (Refer ANNEXURE-3)


(Chapter 49.19, Service Water Heating )
FROM TABLE 10, HOT WATER DEAMAND PER FIXURE FOR VARIOUS TYPES OF
BUILDING,L,H,F,CALCULATE AT A FINAL TEMPERATUER OF 60˚ C
TYPE OF BUILDING: RESIDENTIAL
SERVING AREA XXXXXXXXX
DESCRIPTION OF FIXURE QTY L/H/F L/H
BASIN ,PRIVATE LAVATORY 0 7.6 0
BASIN,PUBLIC LAVATORY 10 15 150
BATHTUB 0 76 0
FOOT BASINS 0 11 0
KITCHEN SINKS 1 38 38
PANTRY SINKS 0 19 0
SHOWERS 0 114 0
DISHWASHER 0 57 0
TOTAL(L/H/F) 188
Equations :
Qh = Qg ( 1, 000 / 3, 600 ) Df
where :
Qh = Probable max. demand (Heater Coil Capacity), mL/s
Qg = Possible max. demand, L /H
Df = Demand Factor(T-10 Hot Water Demand/Fixture, p49.19) = 0.3
Sc = Storage Tank Capacity, Liters
Sf = Storage Factor (T-10 Hot Water Demand/Fixture, p49.19) = 1.25
Qh = Qg ( 1, 000 / 3, 600 ) Df
Qh = 38( 1, 000 /3, 600 ) 0.3
Qh= 15.67 mL/s @ 60°C
Sc = Qh ( 3, 600 / 1, 000 ) Sf
Sc = 3.17( 3, 600 / 1, 000 ) 1.25
Sc= 71 L @ 60°C - hot water demand

AS PER SELECTION 50 litres


POWER 1.5 KW

Conserve Comments

Initials Division Office

You might also like