OHUG Catalogue Section 16

The power
behind
electricity
OHUG Product Catalogue Edition 01
Overhead Switchgear, Line
Hardware & Insulators
Section 16
Overhead
Switchgear,
Section 16.
Line Hardware
& Insulators
0800 GET OHUG

Reclosers/Switches 440
Preformed Wire Products 466
Insulator Pins & Clevis Thimbles 470
Insulators 471
MV Surge Arresters 471
Silicone Insulators 472
OHUG Product Catalogue 0800 GET OHUG Edition 01 439

Recloser / Switches
OSM Recloser - Key Features

Section 16.
0800 GET OHUG
Ultimate Safety and > The World’s Only Arc Fault Vented Solid Dielectric Recloser
Service > Designed for a maintenance free life
> Supported by an international network of Technical Staff
> Ganged ultra-fast magnetic actuators to provide additional operator safety
> Hot Line Tag functionality and Mechanical trip interlock directly connected to the OSM tank’s operating
mechanism
> Unique and seamless NOJA Power Android and iOS App enhances linesmen comfort and safety
> Internal double pole position indicator micro switches for added reliability
> Triple shielded, water blocked and metal conduit protected control cable with military grade IP65 rated
connectors
> Grey powder coated tank to prevent drivers from being blinded by the sunlight reflecting on the tank
> Only 3 electronic modules in total that can be replaced within 5 minutes with a simple screwdriver
> Remote and quick firmware upgrades to keep up with the industry changes over time
Ultimate Innovation > Class Defining Current and Voltage Sensors, included on both load and source side of the device as
standard.
> Full Automation, Logic and Synchronising Feeder Capability as standard
> Over 100 different protection features, from the simplest Overcurrent and Earth Fault Protection through to
Admittance, Fault Locator and Harmonic Protection
> No Active Electronics in the Recloser Tank – Providing exceptional surge immunity and reliability
440 Edition 01 0800 GET OHUG OHUG Product Catalogue

Recloser / Switches

Section 16.
0800 GET OHUG
Unmatched Reliability > Total Stainless Steel External Construction
> Full Industrial Temperature Range -40°C to +55°C
> Proven Performance through decades in service
> 55,000 Reclosers in Service Worldwide and Counting
> Featuring the most reliable vacuum interrupter (VI) technology in the world today with radial magnetic field
contacts to quickly diffuse the arc and maximise the life of the VI
> Medium Time Between Failures (MTBF) of 850 years for a complete unit
> Proprietary OSM tank design to eliminate partial discharges and minimise electrical stress
> Aromatic epoxy poles encapsulated within a stainless steel tank so not exposed to UV radiation
> Rating of 30,000 operations at full load, 3 times the industry’s standard of 10,000 operations
> Seamless Smart-Grid Interoperability with embedded third party type tested and expert level
communication protocol implementations
> Unique ceramic shielded temperature controlling RC control design
> On board powerful processor and FPGE running diagnostics 24/7
> RC control fitted with the industry’s most powerful sealed, spill-proof and MAT lead acid 12Vdc
and 26Ah battery
> The RC controller’s IP66 rating completely eliminates the need for heaters in cold climates or ventilation in
tropical applications
> EMC shielded Human Machine Interface (HMI) available in several languages and fitted inside an IP66
moisture and dust free RC Controller

Underground To
Overhead Connection
Sectionaliser
Section 16.
Voltage Range, 6kV to 38kV

0800 GET OHUG
Mobile Fault
Firing Test Equipment
Smart Grid Schemes
Auto-changeover Schemes Mobile Switchgear

Alarm Switch
Remote Switch
Section 16.
OSM Recloser
0800 GET OHUG

Generator Connection
One Product - Many Applications

Solving Energy Challenges
all over the Distribution Network
Mine Equipment Protection
Substation Circuit Breaker
Renewable and Distributed

Generation Connection

Recloser / Switches
The standard scope of supply
OSM
1 Recloser
Phase Vacuum
CT Interrupter CVT
3 Phase HV Line CVT
Section 16.
Trip/Close Auxiliary
Coil switches
0800 GET OHUG
Control Cable
2
Power
Data
Control / Indication
1 2
The OSM Recloser The NOJA Power Control Cable

> The Connection between Switchgear and Controller
> Solid Dielectric
> Fully Armoured Cable
> Vacuum Interruption
> Ruggedized Stainless Steel Switchgear Connection
> Oil and SF6 Free
> Military Specification Controller Connection
> Arc Fault Venting
> Vandal Proof, Sealed Control Cubicle Entry
> 3 Integrated Current Transformers
> Hand Crafted and Tested in Brisbane Australia
> 6 Integrated Voltage Sensors
> Length Options from 4m to 20m
> Fully Bidirectional Operation
> No Active Electronics
> Hermetically Sealed
> Stainless Steel Construction
> Complete with Steel Mounting Bracket

Recloser / Switches

iPhone, iPad, PC with CMS
GPS Radome
SmartPhone Software
3 RC
Cubicle Panel
UPS & 3
Switchgear Digital
Relay
Control 4 Inputs
Section 16.
Rechargeable RS232
Battery USB Ethernet Wi-Fi 4G
Ethernet
Comms.
SIM
Rad io / I/O
modem modules
PSM
0800 GET OHUG

AC Power
Supply Remote SCADA/CMS/NOJA APP/Protocols
3 4
THE RC10 OR RC15 CONTROLLER THE NOJA POWER RELAY 15

Powered by the NOJA Power Relay 10 or Relay 15 At the core of the RC15 Controller
> Class Leading Comprehensive Protection, Communications, > Advanced Industrial Computer with Multiple Processors
Power Quality Monitoring and Automation > Separate FPGA Signal Processing and Protection CPU
> Integrated GPS for microsecond accurate event timestamping, > Native Ethernet, USB, GPS, WiFi, RS232, 4G/3G/2G and
no communications necessary (RC15 only) Automotive tier MOLEX Connections
> DNP3, IEC 61850, IEC 60870-5-101/104 all standard > Class Leading Protection, Automation and Communications Protocol
> Integrated 4G/3G/2G and WiFi (RC15 only) Functionality
> IP66 Stainless Steel Enclosure > Comprehensive Power Quality Monitoring
> -40 C to +55 C > Unrivalled Custom Logic Programming

Recloser / Switches
OSM Recloser System
ANSI Standard Protection Diagram
RC Series Controls
Section 16.
Under Voltage Over Voltage Neutral Voltage Frequency

Relay Relay Imbalance Relay Protection
O
2721 59 PN 47N
1 81 R
U
P P P Power
HIZ 50 GQ 51 GQ 46BC 67 GQ 21YN 2
21FL
1
2
HRM
1
PQM Quality
SG SG SG Monitoring
High Z Overcurrent Time Delayed Broken Directional Neutral Fault Harmonic
Fault Detection Relay Overcurrent Conductor Overcurrent Admittance Locator Relay
2
46 Reverse
1
Phase Relay
0800 GET OHUG
Sync Check
AC Circuit 52 2
Breaker
TCM 221 321 79 86 25
1 Auto-Sync
Relay
Trip Circuit Time-Delay Interlocking Reclosing Lockout
Monitor Closing Relay Relay Relay Relay
271 59 PN 2
147N
Under Voltage Over Voltage Neutral Voltage

Relay Relay Imbalance Relay RC15 Only
OSM
® LGC RIO HMI HST ABR
GPS WiFi 4G
GPS Local Cellular

AUTOMATIC CIRCUIT RECLOSER Scheme Remote Input/ Human Machine Historian Automatic Comms WiFi Comms
Logic Output Device Interface Backfeed
®
Restoration
LRSS IR SGA CLP ZSC

Standard RC Series
Local Remote Inrush Smart Grid Cold Load Zone Sequence Communications Features
Selector Switch Restraint Automation Pickup Coordination

Recloser / Switches
OHUG Product Catalogue

0800 GET OHUG
Edition 01
447
0800 GET OHUG Section 02.
16. NOJ A POWER
Recloser / Switches
OSM Recloser - Switchgear Phase Variants

Section 16.
0800 GET OHUG
OSM Three Phase OSM Two Phase
The key interrupter architecture of the OSM Recloser can be deployed in four different
variants. Ganged three-phase for 3-wire distribution systems, Two phase for 2 Wire Single
Phase applications, Single Phase for Single Wire Earth Return (SWER) Applications, and
un-ganged Three phase (Single Triple) for 4-wire overhead distribution systems.

Ultimate Innovation
Recloser / Switches

Section 16.
0800 GET OHUG
OSM Single Phase OSM Single Triple
Class Voltage Range Rated Continuous Current Fault Make Capacity RMS Impulse Across Interrupter
OSM38-16 38kV 630A/800A 16kA 200kV
OSM15 15kV 630A/800A 16kA 110kV
OSM27 27kV 630A/800A 12.5kA 150kV
OSM38 38kV 630A/800A 12.5kA 170kV

Recloser / Switches
OSM Recloser - Ultimate Safety

Section 16.
0800 GET OHUG
The World’s Only Arc

Fault Vented Solid
Dielectric Recloser
NOJA power is commited to improving safety for operators in the field.
The NOJA Power OSM Recloser has a patented arc fault venting design,
which allows for containment of internal arc faults and safe venting up
and away from operators. Type tested and verified, arc fault venting in
the OSM Recloser provides operators and the general public with greatly
improved safety.

0800 GET OHUG
Edition 01
451
Recloser / Switches
Driven by the most advanced controller

Section 16.
available today
RC Series Controls
Simplicity for operators but power for protection engineers,
the integrated nature of the OSM Recloser system provides
unparalleled control and automation for engineers yet a device
0800 GET OHUG
which works immediately, straight out of the box.
NOJA Power’s OSM Recloser System is controlled by the world’s

most advanced Autorecloser Control, the NOJA Power RC.
Offered in two variants, the RC10 and RC15 differ only on extended
communications capability, with the latter including integrated GPS,
Secure WiFi and 4G Modem.
Designed in collaboration with some of the most forward-thinking

utilities on earth, NOJA Power’s RC10 and RC15 controllers provide
the intelligence and precision relied upon by thousands of utility
engineers.
When Distribution Networks evolve, the only asset with all the
answers is the NOJA Power RC Controller.

0800 GET OHUG
Edition 01
453
Recloser / Switches
RC Controller - Key Features

Section 16.
0800 GET OHUG
RC15 Relay Module
Class Leading Protection > Full Directional Protection for Overcurrent, Earth Fault, Negative Phase Sequence and Sensitive Earth
Faults, with advanced gate technology for responding to low fault currents
> ANSI, IEC255 and User Defined Protection curve for ultimate flexibility
> Instantaneous high set elements and definite time protection
> The worlds’ highest resolution SEF feature at 200mA minimum pickup*
> Advanced Voltage, Current and Composite Protection such as Broken Conductor, Admittance and
Harmonic Protection
> Complete suite of Power Quality Monitoring and logging tools included as Standard.
Unrivalled Automation > Co-Generation functions standard, including ANSI25 Synchrocheck and Auto-Synchroniser
> Over and Under Voltage Protection providing 3 Phase Load Shedding, Neutral Displacement, Loss of Phase
and Loss of Supply Operation for advanced Automation schemes
> Over and Under Frequency Protection with user programmable pickup range and operating time
> Fully configurable Logic and Smart Grid Automation based on IEC61499 open source logic design
1. * A Switchgear model with matched CTs to provide 0.2A SEF sensitivity, is available for all 3 phase and 2 phase tanks.

Recloser / Switches

IO Module
Local Panel
RC10 RC15
RELAY MODULE RELAY MODULE
Section 16.
Remote Panel
(maximum length 120m)
CMS on Computer
RS485 RS232 Wireless Ethernet Radio Wi-Fi 4G Main 4G Diversity GPS SIM
0800 GET OHUG

Module Module Module Module Module Antenna Antenna Antenna Module Card
Peerless Logging, > An event log for close open and fault protection operations, viewable on the massive 40x17 backlit LCD
Communications and display. This provides operators with clear and concise field reports on recloser operation, including fault
Data availability type, fault current and even distance to fault.
> A detailed event log for all operating history and settings changes viewable through both the local panel or
the supplied software
> Easy loading and retrieval of protection settings using the CMS Software Package
> Instantaneous Voltage, Current and Power metering viewable on the panel
> Load profile data logger, logging comprehensive system parameters on a user configurable period
> Integrated RTU offering DNP3, DNP3-SA, DNP3 over IP, IEC 618650 MMS and GOOSE, IEC 60870-5-101/104
and NOJA Power Proprietary Protocols
> Best in Class Remote Control and SCADA
> Innovative Secure Wireless Remote Control
RC15 Only > All of the above, plus:

> Integrated Secure WiFi
> Integrated GPS for precise timestamping
> Integrated 4G fallback 3G modem

Recloser / Switches
OSM Recloser - Technical Specification
PART NUMBER OSM15-16-800 OSM27-12-800 OSM38-12-800 OSM38-16-800 4
Manufacturing Model 311/312/310 1,2 311/312/310 1,2 311/302/300 1,2 301/302/300 1,2
Current Sensing 3 x Current Transformers 3 3 x Current Transformers ³ 3 x Current Transformers 3 3 x Current Transformers 3
Voltage Sensing 6 x Voltage Screens 3 6 x Voltage Screens 3 6 x Voltage Screens 3 6 x Voltage Screens 3
Rated Maximum Voltage 15.5kV 27kV 38kV 38kV

Section 16.
Rated Continuous Current 800A 800A 800A 800A
Fault Make Capacity RMS 16kA 12.5kA 12.5kA 16kA
Fault Make Capacity Peak 40kA 31.5kA 31.5kA 40kA
Fault Break Capacity 16kA 12.5kA 12.5kA 16kA
Mechanical / Full Load Operations 30,000 30,000 30,000 30,000
Fault Break Capacity Operations 70 140 100 140
Short Time Current Withstand 16kA/3 secs 16kA/3 secs 12.5kA/3 secs 16kA/3 secs
0800 GET OHUG

Recloser / Switches

PART NUMBER OSM15-16-800 OSM27-12-800 OSM38-12-800 OSM38-16-800 4
Mainly Active Breaking Capacity 800A 800A 800A 800A
Cable Charging Current 25A 25A 40A 40A
Line Charging Current 5A 5A 5A 5A
Impulse Withstand Phase to Earth & Phase to Phase 110kV 150kV 195kV 200kV
Section 16.
Impulse Across the Interrupter 110kV 150kV 170kV 170kV
Power Frequency Withstand Phase to Earth (Dry) 50kV 60kV 70kV 70kV
Power Frequency Across the Interrupter 50kV 60kV 70kV 70kV
Ambient Temperature -40oC to +55oC -40oC to +55oC -40oC to +55oC -40oC to +55oC
Humidity 0-100% 0-100% 0-100% 0-100%
Altitude 4 3000m 3000m 3000m 3000m
Weight of the Tank (Three Phase) 100kg 109kg 150kg 150kg
0800 GET OHUG
1. OSM15-16-800-311, OSM27-12-800-311, OSM38-12-800-301, OSM38-16-800-301 (Single Phase Autorecloser) 1 x Current Transformers, 2x Voltage Screens, OSM15-16-800-312, OSM27-12-800-312, OSM38-12-800-302,
OSM38-16-800-302 ( Two Phase Autorecloser) 2 x Current Transformers, 4 x Voltage Screens
2. OSM38-16-800 tested at 40.5kV for interruption
3. Altitudes above 1000m should be corrected in accordance with ANSI C37.60-2012

458
Recloser / Switches
Edition 01
0800 GET OHUG
Recloser / Switches

VISI-SWITCH® OLB15-16-800 15KV MODEL
Section 16.
VISI-SWITCH
0800 GET OHUG

Recloser / Switches
Introduction
NOJA Power’s VISI-SWITCH® is a solid dielectric load

break switch designed for manual isolation in a three-
phase electricity distribution grid feeder. Unique to this
switch, is the viewing window embedded in the bushings,
allowing an operator to see the actual point of isolation.
Through the viewing window, an operator can see the
isolator electrical contacts when the switch is closed and
Section 16.
visible isolation when the switch is open, guaranteeing

that the circuit is isolated.
It also features vacuum interrupters with solid dielectric

insulation and a unique and patent-pending drive
mechanism ensuring safe operational sequence.
NOJA Power’s VISI-SWITCH® OLB15-16-800 has a rated

maximum voltage of 15.5 kV, a rated continuous current
of 800 A and a short time current withstand of 16 kA (for
0800 GET OHUG
3 seconds).
Each phase is comprised of a vacuum interrupter with

solid dielectric insulation and a built-in isolator to provide
physical isolation in accordance with the requirements of
insulation coordination standards IEC 60071-1 Insulation
co-ordination – Part 1: Definition, Principles and Rules
and IEC 60071-2 Insulation co-ordination – Part 2:
Application Guide.
VISI-SWITCH® WITH SURGE
The VISI-SWITCH® features a unique and patent- ARRESTORS
pending drive mechanism which connects the vacuum
interrupters to the isolators and guarantees both parts
of the switch will open once operation is initiated. The
sequencing of the complete switching operation is
VISI-SWITCH® SIDE VIEW VISI-SWITCH® FRONT VIEW

Recloser / Switches

dictated by the drive mechanism which rapidly opens the
vacuum interrupters to break the current and then, after
a short delay, opens the isolators. The viewing window
embedded in the isolator bushings can be seen from the
ground allowing maintenance staff to confirm that the
switch has been isolated prior to commencing work.
Section 16.
The product has been extensively type tested by
independent laboratories to ensure long life and
reliability under the harshest environmental conditions.
The VISI-SWITCH® can operate in extreme temperatures, VISIBLE ISOLATOR CLOSED POSITION
over a -40 to 55˚C temperature range, 0 to 100 percent
humidity, and meets specified ratings up to a height of
1000 m (functional up to 3000 m with derating). The unit
is designed to cope with exposure to salt spray, dust,
smoke and corrosive gases, vapours and liquids. The
viewing window is scratch resistant and can withstand
0800 GET OHUG

impact such as hail according to IK08.
Utilities employ three-phase load break switches to isolate

sections of feeders for maintenance work. In recent years,
older air break switches, which could not be operated
while the feeder was under load have been replaced by
gas switches. While enclosed gas switches address the
reliability deficiencies of air break switches, it comes at a
cost of compromised safety because maintenance staff
can no longer visually check that all three phases are
isolated before starting work on the feeder. SF6 has also VISIBLE ISOLATOR PULLS BACK INTO
OPEN POSITION
been identified as the most potent greenhouse gas and
utilities will most likely incur the cost of disposing the SF6
gas at the end of life of the switch.
NOJA Power’s engineers have designed the VISI-

SWITCH® to overcome the drawbacks of gas load break
switches providing the linesmen with visible break
confirmation that the switchgear has isolated the line
before commencing work. Furthermore, the units
are far more environmentally friendly than existing
solutions because the solid dielectric eliminates the use
of a potent greenhouse gas. Like all other switchgear
products designed and manufactured by NOJA Power it
also features controlled arc fault venting.
The VISI-SWITCH® demonstrates NOJA Power’s ongoing VISIBLE ISOLATOR OPEN POSITION
commitment to the environment, quality and safety
making the VISI-SWITCH® OLB15-16-800 the ideal
choice for today’s smart grids.

Recloser / Switches
Overview
NOJA Power’s VISI-SWITCH® is an enclosed three

phase load break switch with visible isolation. It is
used to isolate sections of feeders for maintenance
work so that work can be carried out in a safe manner.
The VISI-SWITCH® includes an isolator and

vacuum interrupter for each phase that are serially
Section 16.
interconnected for load break application. A

mechanical driving mechanism is provided for driving
open and closed each pair of electrical contacts and
is configured to control the sequence of the opening VISI-SWITCH® FRONT VIEW
and closing of the contacts. The vacuum interrupter
is opened first to break current flow and then after a
short delay the isolators are opened to disconnect the
electrical circuit. When closing, the isolator closes
first and then the vacuum interrupter, making the
current.
0800 GET OHUG
The operator can manually open and close the

contacts of both the isolator and interrupter from the
ground with a single motion using either an extended
hook stick which reaches directly to the switch or a
shorter hook stick which connects to an insulated
down rod extending from the switch.
The advantage of the switch is that the operator

can view the isolator contacts through the viewing
window, thereby readily determining the state of the VISI-SWITCH® VISIBLE ISOLATOR
switch from the ground. In particular, the operator can CLOSED STATE
confirm that there is a visible break i.e. the contacts
are open and that the associated circuit is safely
isolated.
The switch includes isolator bushings in which the

electrical isolator contacts are located, a metal
tank in which the driving mechanism is located, and
interrupter bushings in which the interrupter contacts
are located. The bushings and the tank are sealed
together and impede the ingress of moisture thereby
suiting the assembly to outdoor use. The tank is
manufactured from powder coated stainless steel and
is arc-fault vented. It has a 30 year operating life and
the entire device is rated to IP65.
VISI-SWITCH® VISIBLE ISOLATOR
OPEN STATE

Recloser / Switches

Visible Break Window
The viewing window allows a clear view of the state of

the switch from an operator standing on the ground. The
isolator contact is coated with an iridescent/reflective
paint in the colour red and can be easily seen through
the window even at night with the use of a torch.
Section 16.
The window is designed to remain transparent during
the entire life of the switch, without any discolouration. VISI-SWITCH® WITH VISI-SWITCH® WITH
It is scratch resistant and can withstand extreme VISIBLE ISOLATOR IN VISIBLE ISOLATOR IN
temperatures and weather conditions such as hailstorms OPEN POSITION CLOSED POSITION
and sandstorms. IK08 impact ratings are met on all
parts of the switch including the viewing window.
Insulation System
The insulation system consists of the conductor system
0800 GET OHUG

embedded in solid dielectric. External insulation is
provided by silicone bushings outside of the powder
coated stainless steel tank. Silicone Rubber Boots fitted
over the bushings provide the necessary clearances and
creepages required for the various ratings.
Surge Arrestors can be mounted on all six (6) bushings

and earthed through the tank. Explosive tail surge
arrestors may be used and there are mounting options
for the surge arrestors both at the top and bottom of the
switch. VISI-SWITCH® WITH TOP SURGE
ARRESTORS ARRANGEMENT
VISI-SWITCH® WITH TOP SURGE VISI-SWITCH® WITH BOTTOM SURGE

ARRESTORS ARRANGEMENT ARRESTORS ARRANGEMENT

Recloser / Switches
Installation
The switch can be mounted on timber poles with a

keyhole arrangement or concrete poles using banded
straps. The following types of installations
are supported:
• Mounted to the pole above the powerline

• Mounted to the pole below the powerline
Section 16.
Prior to mounting on the pole, the switch must be

fitted to the mounting bracket and all surge arrestors
and cable tails fitted.
VISI-SWITCH® POLE MOUNTING ARRANGEMENT
(ABOVE THE POWER LINE WITH FEET)
The hanging bracket can be mounted above or below
the cross arm depending on the customer’s preferred
installation location.
The switch is completely symmetrical so it can be

mounted with the hook stick operator facing toward
0800 GET OHUG
the pole or away from the pole.
The switch assembly can be fixed to the pole via a

crane, pole mounted hoist or EPV. Lifting points are
provided to allow for lifting of the assembled switch.
The switch is to remain within 15 degrees of horizontal

whilst lifting. An M12 stud on the switch is provided
for an earth connection. A minimum thickness of (BELOW THE POWER LINE)
35mm2 copper conductor must be used.
Standard hand tools will be all that is required to

complete the installation, namely ring, adjustable
spanners or allen key. All fasteners must be capable
of withstanding the maximum load applied by a man
with a standard spanner.
TUNNEL TWO HOLE NEMA

CONNECTOR PAD OPTION

Recloser / Switches

Operation
The VISI-SWITCH® can be manually operated from

the ground in one single motion using an extended
hook stick which reaches directly to the switch.
An insulated down rod, extending from the switch, can

be used to move the operating mechanism further
down the pole to allow a shorter hook stick to be used.
Section 16.
0800 GET OHUG
VISI-SWITCH® OPEN STATE VISI-SWITCH® OPEN STATE
Dimensions
333.0 [13.3]
1179.0 [46.4]
879.4 [34.6]
333.0 [13.3]
1082.3 [46.2] 250.0 [9.8]
1421.7 [55.4]
VISI-SWITCH® FRONT VIEW VISI-SWITCH® SIDE VIEW

(DIMENSIONS IN INCHES SHOWN IN BRACKETS) (DIMENSIONS IN INCHES SHOWN IN BRACKETS)

Preformed Wire Products
Line hardware
and Insulators
Helixon Aluminium Deadends
Section 16.
Order Code Description Pack Qty
8DE-A 0625C Aluminium Deadend (Squirrel, Namu) 6.3-6.5mm Each 10
8DE-A 0675C Aluminium Deadend (Poko) 6.6-6.9mm Each 10
8DE-A 0750C Aluminium Deadend (Chlorine) 7.4-7.6mm Each 10
8DE-A 0900C Aluminium Deadend (Ferret, Kutu) 8.9-9.3mm Each 10
8DE-A 1015C Aluminium Deadend (Fly) 10.1-10.5mm Each 10
8DE-A 1125C Aluminium Deadend (Rango) 11-11.5mm Each 10

0800 GET OHUG
8DE-A 1150C Aluminium Deadend (Grasshopper, Phlox) 11.5-12.3mm Each 10
8DE-A 1225C Aluminium Deadend (Racoon)12.25-12.80mm Each 10
8DE-A 1280C Aluminium Deadend (Wasp, Beetle) 12.8-13.5mm Each 10
8DE-A 1430C Aluminium Deadend (Iodine, Weke) 14-14.6mm Each 10
8DE-A 1625C Aluminium Deadend (Cricket) 15.9-16.5mm Each 10
8DE-A 1875C Aluminium Deadend (Neon, Mata) 18.5-19.3mm Each 10
8DE-A 2100C Aluminium Deadend (Cockroach) 20.5-21.5mm Each 10
8DE-A 2275C Aluminium Deadend (Panther, Lion ) 22.3-23.3mm Each 10
8DE-A 2375C Aluminium Deadend (Butterfly) 23-24mm Each 10
Helixon Neoprene Deadends
8DE-LTN 0585 PVC Deadend (10mm, 16mm2 PVC) 5.9-7.4mm Each 10
8DE-LTN 0735 PVC Deadend (Namu, Poko) 6.8mm - 8mm 7/2.5 Each 10
8DE-LTN 1035 PVC Deadend (Ladybird, Kutu) 10.4-13.7mm Each 10
8DE-LTN 1370 PVC Deadend (Rango) 13.7-15.5mm Each 10
8DE-LTN 1555 PVC Deadend (Weke, Beetle) 15.5-19.5mm Each 10
8DE-LTN 1950 PVC Deadend (Weta) 19.5-23.9mm Each 10
8DE-LTN 2215 PVC Deadend (N/Screen single core 50mm) 22-25mm Each 10
8DE-LTN 2390 PVC Deadend (N/screen single core 70mm2) 23.9-25.5mm Each 10
Minimum order quantities and box quantities apply.


Helixon Galvanised Steel Guy Grip Deadends
8DE-S 0480 Guy Grip for 7/1.71 (4.6-5.1mm) Each 10
8DE-S 0600 Guy Grip 7/14 7/2.00 Each 10
8DE-S 0750 Guy Grip for 7/2.50 (7.5-8mm) Each 10
8DE-S 0950 Guy Grip for 7/3.15 (9.3-9.7mm) Each 10
8DE-S 0975D Guy Grip for 7/10 (9.7-10.31mm) Each 10
Section 16.
8DE-S 1200 Guy Grip for 7/4.0 7/8 (11.8-12.2mm) Each 10
8DE-S 1255 Guy Grip (12.6-13.0mm) Each 10
Helixon Galvanised Guy Locks
0800 GET OHUG

8GLS 0600 Steel Guy Lock (6.00mm-6.20mm) Each 10
8GLS 0765 Steel Guy Lock 7/12 7.65mm (7.65-7.99mm) Each 10
8GLS 0975 Steel Guy Lock 7/10 9.75mm (9.5-10mm) Each 10
Aluminium Clad Steel Deadends
8DE-AC 0480 Aluminium Clad Steel Deadend (Mullet) 4.3-5.1mm Each 10
8DE-FT 0670AC Deadend Flounder 2 piece (Special Ali clad inner) 6.7-6.8mm Each 10
Copper Clad Deadends
8DE-CC 0400 Copper Clad deadends (10mm2) Each 10

Helixon Aluminium Line Guards
8LG-A 0480 Line Guard (Mullet) Each 10
8LG-A 0620 Line Guard ( Namu, Squirrel) 6.2-6.6mm Each 10
8LG-A 0675 Line Guard (Gopher, Flounder) 6.6-6.95mm Each 10
8LG-A 0695 Line Guard (Gopher, Poko) 6.95-7.35mm Each 10
8LG-A 0750 Line Guard (Chlorine) 7.3-7.8mm Each 10
8LG-A 0830 Line Guard (Ladybird) 8.3-8.8mm Each 10
8LG-A 0900 Line Guard (Ferret, Kutu) 8.8-9.3mm Each 10
8LG-A 1050 Line Guard (Rango, Mink) 10.5-11.1mm Each 10
8LG-A 1125 Line Guard (Rango, Grasshopper) 11.1-11.8mm Each 10

Section 16.
8LG-A 1430 Line Guard (Dog Iodine, Weke) 14-14.9mm Each 10
8LG-A 1625 Line Guard (Dingo) 16.1-16.6mm Each 10
8LG-A 1875 Line Guard (Jaguar) 17.9-18.8mm Each 10
8LG-A 2100 Line Guard (Cockroach) 20.2-21.4mm Each 10
Helixon Aluminium Armour Rods

0800 GET OHUG
8ARA-0530 Armour Rod (Gemini, Mullet) 5.3-5.6mm Each 10
8ARA-0620 Armour Rod (Squirrel, Namu) 6.2-6.6mm Each 10
8ARA-0620XL Armour Rod (Squirrel, Namu) 6.2-6.6mm Extra Length Each 10
8ARA-0660 Armour Rod (Flounder) 6.6-6.9mm Each 10
8ARA-0660XL Armour Rod ( Flounder) 6.6-6.9mm Extra Length Each 10
8ARA-0690 Armour Rod (Gopher, Poko) Each 10
8ARA-0750 Armour Rod (Chlorine) 7.3-7.7mm Each 10
8ARA-0900 Armour Rod (Ferret, Kutu) 8.9-9.5mm Each 10
8ARA-1050 Armour Rod (Rango, Mink) 10.5-11mm Each 10
8ARA-1050XL Armour Rod (Mink)10.5-11mm Extra Length Each 10
8ARA-1125 Armour Rod (Rango, Grasshopper) 11.0-11.5mm Each 10
8ARA-1200 Armour Rod (Racoon, Beaver)11.8-12.4mm Each 10
8ARA-1280 Armour Rod (Wasp) 12.5-13.3mm Each 10
8ARA-1350 Armour Rod (Mercury, Hydrogen) Each 10
8ARA-1430 Armour Rod (Dog, Iodine, Weke)14-14.8mm Each 10
8ARA-1430XL Armour Rods (Dog, Iodine, Weke) 14-14.8mm Extra Length Each 10
8ARA-1625 Armour Rod (Dingo, Cricket) 16-16.8mm Each 10
8ARA-1750 Armour Rod (Orion, Lutetium, Wolf) 17.2-18mm Each 10
8ARA-1875 Armour Rod (Jaguar) 18 - 18.5mm Each 10
8ARA-2100 Armour Rod (Cockroach) 20.7-22mm Each 10
8ARA-2375 Armour Rod (Butterfly) 23.4-24.3mm Each 10
8ARA-2625 Armour Rod Centipede Each 10


Helixon Galvanised Conductor Splices
8LS-S 0480 Steel Line splice 7/1.71 4.8mm (4.5-4.9mm) Each 10
8LS-S 0735 Steel Line splice 7/12 7.35mm Each 10
8LS-S 0600 Steel Splice 7/2.00 Each 10
8LS-S 0750 Steel Splice 7/2.45 Each 10
Helixon Aluminium Conductor Splices
Section 16.
8LS-A 0625 Aluminium Line splice (Squirrel, Namu) 6.25-6.55mm Each 10
8LS-A 0690 Aluminium Line splice (Gopher, Poko) 6.9-7.15mm Each 10
8LS-A 0735 Aluminium Line splice (Chlorine) Each 10
8LS-A 0900 Aluminium Line splice (Ferret, Kutu) 9-9.4mm Each 10
8LS-A 1125 Aluminium Line splice (Mink, Rango) 11-11.5mm Each 10
8LS-A 1430 Aluminium Line splice (Dog, Weke) 13.9-14.5mm Each 10
8LS-A 1625 Aluminium Line splice (Dingo) 15.7-16.4mm Each 10
Helixon Full Tension Line Splices
0800 GET OHUG

8LS-FT 0490 Aluminium Line Splice Full Tension (Mullet) Each 10
Helixon Vibration Dampers
9HVD-063 Vibration Damper (Pig Tail) Gopher, Squirrel, Namu. 6.4 - 8.2mm Each 10
9HVD-083 Vibration Damper (Pig Tail) Ferret, Kutu, Fly, Ladybird, Mink 8.3 - 11.7mm Each 10
9HVD-117 Vibration Damper (Pig Tail) Dog, Iodine, Weke, Racoon 11.8-14.4mm Each 10
9HVD-145 Vibration Damper (Pig Tail) Cricket, Dingo, Wolf, Jaguar 14.5 - 19.5mm Each 10

Insulated Pin and Clevis Thimbles
Pins & Clevis
21130WPIN Lead Head Pin 1130W Each 1
3C/200/11-20 Insulator Pin 20mm Each 1
31540WPIN Insulator Pin 1540W Each 1 OH510 PIN

OH510PIN 510 Insulator Pin Each 1
AL750 Aluminium Clevis Thimble 70kN Each 1
3CTHAL-70 Clevis Thimble 70kN Each 1
3CTHIL-125 Clevis Thimble 125kN Each 1
DS70KN Galvanised Ductile Iron Clevis Thimble 70kN (CAC438Q) Each 1
3TYC-70 Twisted Clevis Thimble 70kN Each 1

Section 16.
3TYC-120 Twisted Y Clevis Tongue 120kN Each 1
3TYC-160 Twisted Y Clevis Tongue 160kN Each 1
3DSC 0616 Iron suspension Clamp 6mm-16mm Each 1

AL750
OH100 Aluminium Gain Block 100mm Each 1
OH125 Aluminium Gain Block 125mm Each 1
3J211CZS Joslyn Nylon Head Pin MacLean Each 1
BC - 70 Ball Clevis Each 1
M24-25 M20 x 200mm Pin with 180mm thread to suit the R12.5EC200N insulator Each 1
CT-70H Clevis Tongue 70kN Cast Iron c/w Hex Pin Each 1
0800 GET OHUG
AS-70 Anchor Shackles Each 1
AS-120 Anchor Shackles Each 1
AA23001 Insulator Shackle U 210 HDG Each 1 OH100

AA23002 Insulator Shackle U 205 Each 1
Thimbles
3SOCT-70 Socket Thimble 70kN Each 1
3SOCT-160 Socket Thimble 160kN Each 1
3SOCT-70R Socket Thimble 70kN (R pin) Each 1
3SOCT-70W Socket Thimble 70kN (W pin) Each 1

DS70 KN
3OGT-10 10mm Thimbles Open Neck Galvanised Each 1
3OGT-20 Thimbles Open Neck Wire (THWO-19) Each 1

Insulators / MV Surge Arresters

Porcelain & Glass Insulators
2205 Insulator 205 LV Bobbin Box 50
24490 Insulator 4490 33Kv Pin type B/S Box 1
24494 Insulator 4494 33kV Post Insulator Each 1
2510 Insulator 510 LV Box 30
2511 Insulator 511 LV Box 30
21540W Insulator 1540W Each 1
O11KVP 11kV Line Post Insulator with M20 stud ext. 190mm Each 4
Section 16.
O33KVP 33kV Line Post Insulator with M20 stud ext. 190mm Each 2
211KVP 11kV Post Insulator Box 4 220

222KVP 22kV Post Insulator Each 1
233KVP 33KV Post Insulator Box 2
2ALP/22/450 22KV ALP 22/450 Box 6
2GY2 Porcelain Guy Strain Insulator GY2 11kV Box 25 205

2GY3 Porcelain Guy Strain Insulator GY3 33kV Box 4
2UG70TC-HEX Glass Disc Insulators Each 1
C4-170-11-445 Solid-Core Station Post Insulator Each 1

210 11 KVP
0800 GET OHUG

R11ET200L-487 Tie-Top Type Line Post Insulator Each 1
R11EH200L-560 Clamp-Top Type Line Post Insulator Each 1
R12.5EC200N Clamp-Top Type Line Post Insulator Each 1
R11EC200N-530 33kV Clamp Top Line Post Insulator with pin and top clamp TSC2538 Each 1
510 GY2/GY3
Cable Crucifix Kits
PT11 KIT 11kV Pole Top Kit Each 1
AA18201 Type1 Cable Crucifix 11/33 kV Each 1
Surge Arresters
SIEMENS Surge Arresters
3EK7-120-4CD4 Surge Arrester Class 1 11kV Each 1
3EK7-300-5CH4 Surge Arrester Class 2 22kV Each 1
3EK7 360-5CJ4 Surge Arrester Class 2 33kV Each 1
3EK7-120-4CD4D Disconnect Surge Arrester X Arm Mount Class 1 11kV Each 1
3EK7-120-4CD4T Disconnect Surge Arrester Tank Mount Class 1 11kV Each 1

Silicone Insulators
Silicone Insulators
Clamp Top Line Post Insulator
ARP-LPSC-15SK 15 kV Clamp Top Line Post Insulator Each 1
ARP-LPSC-25kV 25 kV Clamp Top Line Post Insulator Each 1

Section 16.
Clamp Top Line Posts
ARP-LPH-35SK-GB-1 35kV Horizontal Line Post c/w gain base and AL wire clamp 6-38mm Box 1
ARP LPB-35SK-GB-1 35kV Vertical Line Post c/w gain base and AL wire clamp 6-38mm Box 1
0800 GET OHUG
ARP LPH-69SK-GB-1 69kV Horizontal Line Post c/w gain base and AL wire clamp 6-38mm Box 1
ARP LPV-69SK-GB-1 69kV Vertical Line Post c/w gain base and AL wire clamp 6-38mm Box 1
ARP-LPV-15SK-1 15kV Vertical Line Post w/ Aluminum Wire Clamp Each 1
ARP-LPV-15SK-1 KIT 15kV Vertical Line Post w/ Aluminum Wire Clamp c/w LPP-7-34 Box 1
ARP-LPV-35SK-1 35kV Vertical Line Post and AL wire clamp 6-38m Box 1
ARP-LPV-69SK-GB-HP-1-2330 69Kv Vertical Line Post c/w gain base and trunnion cable clamp Each 1
ARP-LPH-69SK-GB-HP-1-2180 69Kv Horizontal Line Post c/w gain base and trunnion cable clamp Each 1
Line Post Insulators
ARP-LPCN-15SK 15KV Line Post Insulator w/ C-Neck Box 1
ARP-LPCN-15SK KIT 15KV Line Post Insulator w/ C-Neck c/w LPP-7-34 Each 1
ARP-LPFN-35SK 35kV Line Post Insulator w/F-Neck Each 1
Station Post
ARP-TR205SK 15kV Station Post Insulator (TR205) Each 1

Silicone Insulators

Strain Deadends
ARP-15SKCE-S 15kV Silicon Strain Dead End Clevis & Eye Box 1
ARP-15SKCE-S KIT 15kV Silicon Strain Dead End Clevis & Eye c/w AL750 Each 1
ARP-25SKCE-S 25kV Silicon Strain Dead End Clevis & Eye Each 1
ARP-35SKCE-S 35kV Silicon Strain Dead End Clevis & Eye Each 1
Cutout
Section 16.
27kV Cutout Switch 100 Amp w/Arc Shortening Rod, Parallel Grove Clamp,
CS27-AP1-100C Each 1
Nema A Bracket Type C (interrupting capacity)
0800 GET OHUG

Accessories
ARP-LPP-7-34 7" line post pin shaft 3/4" (20mm) - for 11/22 Kv Insulators Each 1
ARP-ATC-150 Cast Aluminium Wire Clamp (.25 to 1.5" dia wire) Each 1
ARP-LPP-10-34 10" Long line post pin shaft 3/4" (20mm) - for 35 Kv Insulators Each 1
Other
ARP SBHL021-A3400 69kV Silicone Transmission Insulator Clevis & Tongue 25,000lb Sml Each 1
ARP-LPE-69SK-SP-GB 69kV Silicone Line Post w/ 2 hole blade & gain base Each 1
ARP-LPV-69SK-SP 69kV Silicone Vertical Line Post Each 1
ARP-69SKYC-S 69kV Suspension Insulator c/w Y Clevis and Tongue Each 1
ARP SBHL030-A3400 115kV Silicone Transmission Insulator Clevis & Y-Clevis & Oval Eye 25,000Lb Each 1
ARP-LPE-115SK-SP-GB 115kV Silicone Line Post w/ 2 Hole Blade & Gain Base Each 1
ARP-LPV-115SK-SP 115kV Silicone Vertical Line Post Each 1

OHUG POWER EQUIPMENT LIMITED
(HEAD OFFICE)
71 Adams Drive, PO Box 1074
Pukekohe, Auckland 2340
New Zealand
P: +64 9 239 2186

F: +64 9 239 2189
E: info@ohug.com
SALES LOWER NORTH ISLAND

P: 0800 438 648
F: 0800 GET OHUG
E: info@ohug.com
SALES & WAREHOUSE SOUTH ISLAND

P: +64 3 686 3578
F: 0800 GET OHUG
E: info@ohug.com

OHUG Catalogue Section 16

Uploaded by

Copyright:

Available Formats

OHUG Catalogue Section 16

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

OHUG Catalogue Section 16

Uploaded by

Copyright:

Available Formats

The power

0800 GET OHUG

OHUG Product Catalogue 0800 GET OHUG Edition 01 439

OSM Recloser - Key Features

440 Edition 01 0800 GET OHUG OHUG Product Catalogue

Overhead Switchgear, Line

OHUG Product Catalogue 0800 GET OHUG Edition 01 441

Voltage Range, 6kV to 38kV

Smart Grid Schemes

Auto-changeover Schemes Mobile Switchgear

442 Edition 01 0800 GET OHUG OHUG Product Catalogue

0800 GET OHUG

One Product - Many Applications

Mine Equipment Protection

Substation Circuit Breaker

Renewable and Distributed

OHUG Product Catalogue 0800 GET OHUG Edition 01 443

The standard scope of supply

The OSM Recloser The NOJA Power Control Cable

444 Edition 01 0800 GET OHUG OHUG Product Catalogue

Overhead Switchgear, Line

0800 GET OHUG

THE RC10 OR RC15 CONTROLLER THE NOJA POWER RELAY 15

OHUG Product Catalogue 0800 GET OHUG Edition 01 445

OSM Recloser System

ANSI Standard Protection Diagram

Under Voltage Over Voltage Neutral Voltage Frequency

Under Voltage Over Voltage Neutral Voltage

GPS Local Cellular

LRSS IR SGA CLP ZSC

446 Edition 01 0800 GET OHUG OHUG Product Catalogue

OHUG Product Catalogue

OSM Recloser - Switchgear Phase Variants

OSM Three Phase OSM Two Phase

448 Edition 01 0800 GET OHUG OHUG Product Catalogue

Overhead Switchgear, Line

OSM38-16 38kV 630A/800A 16kA 200kV

OSM15 15kV 630A/800A 16kA 110kV

OSM27 27kV 630A/800A 12.5kA 150kV

OSM38 38kV 630A/800A 12.5kA 170kV

OHUG Product Catalogue 0800 GET OHUG Edition 01 449

OSM Recloser - Ultimate Safety

The World’s Only Arc

450 Edition 01 0800 GET OHUG OHUG Product Catalogue

Driven by the most advanced controller

which works immediately, straight out of the box.

NOJA Power’s OSM Recloser System is controlled by the world’s

Designed in collaboration with some of the most forward-thinking

452 Edition 01 0800 GET OHUG OHUG Product Catalogue

RC Controller - Key Features

RC15 Relay Module

454 Edition 01 0800 GET OHUG OHUG Product Catalogue

Overhead Switchgear, Line

0800 GET OHUG

RC15 Only > All of the above, plus:

OHUG Product Catalogue 0800 GET OHUG Edition 01 455

OSM Recloser - Technical Specification

PART NUMBER OSM15-16-800 OSM27-12-800 OSM38-12-800 OSM38-16-800 4

Rated Maximum Voltage 15.5kV 27kV 38kV 38kV

Rated Continuous Current 800A 800A 800A 800A