7.

 Explain Concept of IOT data management

with diagram.

For Module For Module 2,3,4,5 scroll down

2,3,4,5 ,

Scroll down

IoT QUESTION BANK

Module 1 

1. What is the role of things and internet in IoT? 2 M

2. What is IoT? Explain components in IoT. 5 M

3. What are the differences between machines in M2M and Things in IoT?4M

4. Explain evolutionary phases of the internet. 4 M

5. Illustrate the challenges of IoT and their impact, with any 1 example. 5 M

6. Compare IT and OT networks with their challenges. 8 M

7. List and explain the challenges and problems that IoT is currently facing. 5 M

8. Explain oneM2M IoT Standardized Architecture with a neat diagram. 10 M

9. Explain the IoT architectural drivers. 5 M

10. With a neat diagram explain the IoTWF standardized architecture. 8 M

11. Explain in detail the expanded simplified IoT architecture. 8 M

12. Explain in detail the communication network layer. Illustrate the various access technologies with

respect to distances. 5 M

13. Explain the 2 types of gateway and backhaul sublayers. 5 M

14. With a neat diagram explain the fog computing model along with its defining characteristics. 6M

15. a. What is edge computing? Explain with example. 5 M

b. Illustrate the hierarchy of edge, fog and cloud with a neat diagram. 5 M

Module 2

1. Explain the various network topologies with examples. 8 M

2. Explain the classification of smart objects with examples. 5 M

3. What is IEEE 802.15.4 protocol? How is it related to IoT? 4 M

4. Classify different types of sensors with examples. 7 M

5. a. list all the sensors used in a smart phone. 2 M

6. What is an actuator? Explain how sensors and actuators interact with the physical world. 5 M

7. Classify the actuator, with examples. 3 M

8. With a neat diagram, explain the characteristics of smart objects. List the trends in smartobjects. 8 M

9. What are SANETs? List its advantages. 5 M

10. List and explain different communication criterias in IoT. 8 M

11. Explain LoRaWAN layers and its architecture. 10 M

 Module 3

1. List the advantages of Internet Protocol. 5 M

2. Explain with example MQTT Protocol. What is role of MQTT protocol in IoT? 8 M

3. Write a note on: CoAP, REST, and XMPP.

4. What are the differences between adaptation and adoption of the Internet Protocol? 5 M

5. Why optimization is necessary for Internet Protocol. 8 M

6. What are the differences between IPv4 and IPv6 in an IoT? 5 M

7. Write a note on: 6LoWPAN, 6TiSCH, RPL.

8. Explain authentication and encryption on constrained nodes. 4 M

9. Explain IoT application protocol and their transport methods. 10 M

10. List the categories of IoT application protocols and their transport methods. 4 M

11. Explain the problem and solution if application layer protocol layer not present. 4 M

12. Explain adapting SCADA for IP with DNP3 as a representative use case. 5 M

13. Explain raw socket scenarios for tunneling legacy SCADA over IP networks. 10 M

14. List the categories of IoT application protocols and their transport methods. 4 M

15. Explain the problem and solution if application layer protocol layer not present. 4 M

16. Explain adapting SCADA for IP with DNP3 as a representative use case. 5 M

17. Explain raw socket scenarios for tunneling legacy SCADA over IP networks. 10 M

18. Write a short note on profiles and compliances for IoT constrained nodes and networks. 10 M

Module 4

1. What is IoT data analytics and their challenges? 8 M

2. What are the common applications of machine learning of IoT. 4 M

3. Explain Big data analytics tools. 10 M

4. Comparison between Big Data, Edge Analytics and Network Analytics. 10 M

5. Explain Edge Analytics core functions. 5 M

6. What are the common challenges in OT security? 8 M

7. Explain the Purdue Model for Control Hierarchy. 6 M

8. Compare the nature of how traffic flows across IT and OT networks. 4 M

9. Explain Formal Risk Analysis Structures. 10 M

10. Explain security between Levels and Zones in the Process Control Hierarchy Model. 5 M

Module 5

1. How Arduino Uno is different from the other available microcontrollers? 5 M

2. What is Arduino Uno? Does the Arduino supports networking? 5 M

3. How is programming an Arduino different than standard C? 5 M

4. Explain with an example, a basic structure of Arduino programming. 5 M

5. Explain with an example the following methods: (Each one mark)

a. pinMode(pin,mode)

b. digitalRead(pin)

c. digitalWrite(pin,High)

d. analogRead(pin)

e. analogWrite(pin,value)

f. delay(ms)

g. millis()

h. min(x,y)

i. max(x,y)

j. randomseed(value)

k. random(min,max)

l. serial.begin(rate)

m. serial.println(data)

6. Write a note on DS18B20 temperature sensor. 5 M

7. Explain with a neat sketch, the following use cases:

8. Street lighting architecture 7 M

9. Smart parking 7 M

10. Smart traffic control 7 M

11. With a neat diagram, explain a four layered architecture of a smart city IoT Infrastructure. 10 M

12. Differentiate between Analog, Digital and PWM pins. 5 M

13. What is a raspberry pi? What OS does raspberry pi use? 2 M

14. How to configure OS setup on raspberry pi. 5 M

15. Explain Raspberry pi2 model B and its General Purpose I/O (GPIO) 10 M

16. Explain general commands for raspberry pi.

UID
Module 5

1. Explain general guidelines for layout windows and pages

2. Explain border guidelines in window organiza on and layout.

3. What is the scope of tes ng and importance of usability tes ng

4. What are the advantages and disadvantages of hand sketches.

5. Explain heuris c evalua on.

6. Explain test plan.

7. List usability test guidelines

8. Write a note on hypermedia

9. What is visualiza on?. Explain knowledge visualiza on and techniques

10. Explain any two so ware tes ng tools.

 ||Jai Sri Gurudev||
BGS INSTITUTE OF TECHNOLOGY, B G NAGAR
DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING

Staff Name: NIVEDITHA N M SEM: VIII

COURSE CODE: 15CS81 SUB NAME: INTERNET OF THINGS

QUESTION BANK
MODULE 1
1. What is IOT? What are the evolutionary phases of IOT?

2. List and explain some of the differences between IT and OT networks and their various
challenges.
3. List and explain a few of the most significant challenges and problems that IoT is
currently facing.
4. List and explain the requirements driving specific architectural
Changes for IoT.
5. With a neat diagram explain the oneM2M IoT Standardized Architecture.

6. With a neat block diagram illustrate The IoT World Forum (IoTWF) Standardized
Architecture.(explain every layer)
7. With the help of a diagram explain extended simplified IOT architecture.

8. Write a short note on The IoT Data Management and Compute Stack with Fog
Computing.
9. Explain Distributed Compute and Data Management Across an IoT
System

MODULE 2
1. List and explain the number of ways to group and cluster sensors into different
categories
2. List and explain sensor types.

3. How Sensors and Actuators Interact with the Physical World. Explain

4. Explain the Characteristics of a Smart Object

5. Explain Design Constraints for Wireless Smart Objects

6. Write a short notes on Data Aggregation in Wireless Sensor Networks

7. What are the technologies for connecting smart objects. Explain

8. Write a short note on Classes of Constrained Nodes, as Defined by RFC 7228

9. Write a short note on IoT Access Technologies

10. What are all the Protocol Stacks Utilizing IEEE 802.15.4

11. Write a short note on High-Level ZigBee and zigbee IP Protocol Stack.

12. Write a short note on IEEE 802.15.4 PHY Format

13. Write a short note on IEEE 802.15.4 MAC Format

14. Write a short note on 802.15.4 Sample Mesh Network Topology

15. Write a short note on Frame Format with the Auxiliary Security Header Field for
802.15.4-2006 and Later Versions

Module 3
1. List and explain the advantages of Internet protocol.

2. Illustrate with a neat block diagram, How to optimize IP for IOT using adaptation
Layer.
3. Examine the IOT protocol stack utilizing 6LoWPAN and an IP protocol stack.

4. Describe with a neat diagrams the header stacks of 6LoWPAN

5. Discuss Application Protocols for IoT

6. Demonstrate IOT Data broker with respect to application Layer protocol not present

7. Discuss tunnelling Legacy SCADA over IP network

8. Compare CoAP and MQTT with some factors.

9. Discuss CoAP Massage format

10. Discuss MQTT Massage format

MODULE 4
1. Differentiate between structure and unstructured data

2. Explain with a block diagram the types of Data analysis

3. List and Explain Iot data analytics chaleenges

4. “machine Learning is indeed central to Iot” Justify

5. List and Describe the “Three Vs” to categorize big Data.

6. Explain the domains which revolve around the common applications of ML for IOT

7. Explain the databases technologies broadly fit into few categories that each have
strengths and potential drawback when used in an IOT context(with diagram)
8. Write a short note on Apache kafka.

9. Write a short note on Lambda architecture.

10. List and explain edge analytics core functions and illustrate edge analytics processing
unit.
11. Distributed analytics throughout the IoT system.

12. Demonstrate smart grid FAN analytics with Net-Flow example.

13. List and explain the benefits of flow analytics

14 Write a shot note on flexible Net-Flow Architecture.

15. Discuss the common challenges faced in IoT.

16. Write a short note on Purdue Model for control hierarchy with diagram.

17. Compare the nature of traffic flows across IT and OT Networks.

18. Illustrate Formal Risk Analysis structures Octave and Fair.

19. Illustrate inter level security models and inter Zone conduits in the process control
hierarchy

MODULE 5
1 What is Arduino? Explore Arduino UNO learning Board.

2. Briefly explain the fundamentals of Arduino Programming

3. Demonstrate the programs to interface LED switch and Potentiometer

4. Demonstrate the programs to interact with serial monitor of our computer screen
5. Demonstrate the programs to interfacing display, GSM, GPS to Arduino

6. Demonstrate the programs to interfacing motors.

7. What is a Raspberry Pi? Explore the Raspberry Pi Learning Board with circuit diagram.

8. Describe the system of Chip(SoC)

9. Write a short note on Raspberry Pi operating Systems.

10. Explain the steps involved in setting up an operating system on Raspberry Pi

11. Explain the commands used in Raspberry Pi

12. Write a simple Python programs on Raspberry Pi.

i) Program to add two numbers
ii) Program to find the ip address of raspberry pi
iii) Program to generate password
iv) Program to print Fibonacci series
v) Program to check for Armstrong number
vi) Program to display calendar of given month of the year

13. Demonstrate interfacing programs on Raspberry Pi.

i) Printing to terminal
ii) Blinking an LED
iii) Push button for physical input
iv) Interact with the user
v) Buzzer
vi) Temperature sensor
vii) Light sensor
viii) Passive inferred sensor

14. What is the use of GPIO pins?

15. What is the use of SPI and I2C interfaces on Raspberry Pi.