Uniphos

KwikSense
Smart Digital Gas Transmitter

Engineered to
deliver in the most
challenging
conditions and
safeguard your
valuable assets.
 Uniphos
Delivering KwikSense
Excellence Smart Digital Gas Transmitter
for over 25 years The KwikSense smart digital gas
transmitter is a universal transmitter which
is compatible with all our smart gas
sensors and capable of accepting more
than 100 smart gas sensors. It is a field
mountable device suitable for the
detection and continuous monitoring of
hazardous gases at industrial plant
locations.

KwikSense is available for a large number

of gases which include oxygen, toxic
gases, combustible gases and volatile
organic compounds (VOCs).

Digital Communication
on MODBUS over RS 485

3 potential free
relay contacts

Industry standard
ATEX 4-20mA analog output

Pre-Calibrated Smart Sensor

capable of swapping between
any sensor technology

Sensor Technologies available

- Electrochemical, NDIR,
Pellistor, PID, Solid State

Non-intrusive Calibration

Bright OLED display

Multiple Variants
Singular Reliability

Uniphos Uniphos
KwikSense LITE KwikSense RD
Digital Gas Transmitter Remote Transmitter

The KwikSense LITE is the latest transmitter The KwikSense RD is a remote transmitter
from Uniphos Envirotronic and is designed to that bridges the detector and controller. It
meet the various needs of our customers. consists of an OLED display to indicate the
gas concentration detected by the detector
The digital transmitter is housed in an on field.
explosion-proof ("Exd" certified) wall-
mountable enclosure and is virtually The remote transmitter is housed in an
maintenance-free. explosion-proof ("Exd" certified) wall-
mountable enclosure.

Specifications Specifications
< Fixed single gas sensors < Configuration via non-intrusive magnetic
wand
< Sensor Technology – Comes in five
technologies i.e., EC/PEL/NDIR/PID/SS < Industrial standard RS-485 Modbus/ 4-20
mA output and input are available to
< Industrial standard 4-20 mA output helps
connect controller as well as the detector
to connect with all the controllers
< Tri-color LEDs have been provided to
< Tri-color LEDs have been provided to
signal the alarm condition
signal the alarm condition
KwikSense
Smart Sensors
Sensor Technology at its best
Smart Sensor Modules available for Gases

Code Gas Name Range Resolution Type

010A Oxygen 0 - 25% V/V 0.1% V/V EC

015A Ozone 0 - 1 PPM 0.01 PPM EC
020A Carbon Monoxide 0 - 1000 PPM 1 PPM EC
021A Carbon Disulfide 0 - 100 PPM 1 PPM EC
022A Vinyl Chloro Monomer* 0 - 100 PPM 1 PPM EC
023A Styrene* 0 - 100 PPM 1 PPM EC
024A Acrylonitrile* 0 - 100 PPM 1 PPM EC
025A Carbon Dioxide 0 - 5% V/V 0.01% V/V NDIR
025B Carbon Dioxide 0 - 100% V/V 1% V/V NDIR
030A Hydrogen Sulfide 0 - 100 PPM 1 PPM EC
035A Mercaptan 0 - 20 PPM 0.1 PPM EC
040A Sulphur Dioxide 0 - 20 PPM 0.1 PPM EC Multiple Sensor
Technologies;
050A Phosphine 0 - 10 PPM 0.01 PPM EC Electrochemical,
055A Phosgene 0 - 1 PPM 0.01 PPM EC NDIR, Pellistor, PID
060A Chlorine 0 - 20 PPM 0.1 PPM EC and Solid State
061A Bromine 0 - 20 PPM 0.1 PPM EC
070A Hydrogen Chloride 0 - 20 PPM 0.1 PPM EC Easy to calibrate
071A PCl3* 0 - 10 PPM 1 PPM EC with plug and play
capability
072A Hydrogen Fluoride 0 - 10 PPM 0.1 PPM EC
073A POCl3* 0 - 20 PPM 1 PPM EC
075A Hydrogen Cyanide 0 - 100 PPM 1 PPM EC
Sensors we use in our
081A Nitrogen Dioxide 0 - 20 PPM 0.1 PPM EC
KwikSense Transmitters can
082A Ammonia 0 - 100 PPM 1 PPM EC be considered the heart of
082B Ammonia 0 - 1000 PPM 1 PPM EC the transmitter. We develop
090A Hydrogen 0 - 1000 PPM 1 PPM EC and manufacture most of
090B Hydrogen 0 - 100% LEL 1% LEL EC our smart sensors. Backed
090C Hydrogen 0 - 100% LEL 1% LEL Pellistor with our vast experience, we
098A Formaldehyde* 0 - 10 PPM 1 PPM EC offer dependable and
099A HC (Methane) 0 - 100% LEL 1% LEL Pellistor proven digital gas sensors
099B LPG 0 - 100% LEL 1% LEL Pellistor that can detect even small
099C Acetylene 0 - 100% LEL 1% LEL Pellistor
concentrations of gas
accurately and rapidly.
099D Butanol 0 - 100% LEL 1% LEL Pellistor
099E Methane 0 - 100% LEL 1% LEL NDIR
099F Methane 0- 100% V/V 1% V/V NDIR
EC: Electro Chemical, NDIR: Non-Dispersive
099G HC (Methane)* 500 - 10000 PPM 10 PPM Solid State Infrared, PID: Photo Ionization Detection
099H Hydrocarbon* 50 - 1000 PPM 1 PPM Solid State Note : Please contact us for any other special
gas requirements other than that specified in
100A VOC (Isobutylene) 0 - 1000 PPM 1 PPM PID the table.
100B VOC (Isobutylene) 0 - 4000 PPM 1 PPM PID * Please consult factory for more information
Do more with an
exclusive range of
Accessories
KwikSense
Premium Accessories
There are a range of accessories for the
KwikSense transmitter that can be
used in a wide variety of applications.
These include mounting bracket,
collection cone, duct mounting kit and
weather shield/ calibration adapter.

Weather Shield Pipe Mounting Bracket

Designed to protect the sensor from Allows the KwikSense
changes in environmental conditions. transmitter to be installed
This is recommended to be fitted to a onto a dedicated
KwikSense transmitter sensor for mounting post or existing
outdoor exposed applications. structure at the desired
location.

Collection Cone
Designed for use with gases lighter
than air. It is an optional accessory
that may be fitted to the KwikSense
transmitter.
Duct Mounting Kit
Used to mount the transmitter
in HVAC systems, allowing
monitoring of gases inside it.
 General Specifications
Parameter KwikSense KwikSense-Lite KwikSense-RD
Sensor technology EC/PEL/NDIR/PID/SS EC/PEL/NDIR/PID/SS NA
Operating Voltage 18V to 30 VDC 18V to 30 VDC 18V to 30 VDC
System Type µController based µController based µController based
instrument instrument instrument
(non intrusive calibration) (non intrusive calibration) (non intrusive operation)
Display 8 x 2 OLED Display 8 x 2 OLED Display 8 x 2 OLED Display
Sampling type Diffusion Diffusion NA
Sensor Swappable Smart Sensor Fixed Single gas sensor NA
(Industrial std. 4-20mA input)
LED's Tri-color LED Tri-color LED Tri-color LED
Alarms Two user settable alarms Two user settable alarms Two user settable alarms
Output RS-485 MODBUS 4-20 mA Current RS-485 MODBUS
/ 4-20mA Current / 4-20mA Current
Relays 3-potential free contacts 1-potential free contact (opt.) 3-potential free contacts
Load resistance 600 Ω (max) 600 Ω (max) 600 Ω (max)
Power Consumption < 3 W <3W <3W
Enclosure Flameproof Flameproof Flameproof
Cast Aluminium alloy/SS-316 Cast Aluminium alloy/SS-316 Cast Aluminium alloy/SS-316
Ingress protection IP 66 IP 66 IP 66
Dimensions (mm) Approx. 250 x170 x 105 Approx. 250 x170 x 105 Approx. 250 x170 x 105
(WO cable gland & stopper) (WO cable gland & stopper) (WO cable gland & stopper)
Wire con guration 3/4 wires 3 wires 3/4 wires
Interface Calibration & con guration Calibration & con guration Con guration via non-intrusive
via non-intrusive magnetic via non-intrusive magnetic magnetic wand
wand wand
Operating Temp. -20 to 60 ° C -20 to 60 ° C -20 to 60 ° C
Operating Pressure Ambient + 10 % Ambient + 10 % Ambient + 10 %
Operating Humidity 0-95 %RH (non-condensing) 0-95 %RH (non-condensing) 0-95 %RH (non-condensing)
Cable entries ½” NPT (2 entries) / ½” NPT (2 entries) / ½” NPT (2 entries) &
¾" NPT (2 entries) ¾" NPT (2 entries) ¾" NPT (1 entry)
Certi cations 1. CCOE 1. ATEX/IECEx + PESO 1. ATEX/IECEx + PESO
2. ATEX/IECEx + PESO 2. CIMFR
3. CIMFR
4. SIL2
5. INMETRO
Weight 2.5 kg (Approx.) 2.5 kg (Approx.) 2.5 kg (Approx.)
BR/500DT/EXPORT/V3/25102019

Certifications < CCOE & CIMFR certified to Exd IIC, T6, IP 66 < IECEx Certified Certificate No: IECEx BAS 14.0148X
< ATEX certified by SGS BASEEFA Certificate No: Ex db IIC T6 Gb (Tamb = -20°C to +40°C)
Baseefa 14ATEX 0304X Ex db IIC T5 Gb (Tamb = -20°C to +55°C)
II 2 G Ex db IIC T6 Gb (Tamb = -20°C to +40°C) Ex db IIC T4 Gb (Tamb = -20°C to +85°C)
Ex db IIC T5 Gb (Tamb = -20°C to +55°C) < SIL-2 Certified Reference Standard IEC 61508:2010
Ex db IIC T4 Gb (Tamb = -20°C to +85°C) by TUV SUD Italia Certificate No: C-IS-722165195
Due to continuous development, we reserve the right to change specifications without prior notice.
Marketing Office: Manufactured By:
Uniphos Envirotronic Pvt. Ltd Uniphos Envirotronic Pvt. Ltd
Readymoney Terrace, 167, P.O. Nahuli - 396 108, IND17.5449/U/Q
Dr. Annie Besant Road, Worli, Tal. Umbergaon,
Mumbai 400 018, India. Dist: Valsad, Gujarat, India
Tel. : +91(22) 6123 3500 Tel. : +91 99099 94042
Fax : +91 (22) 2497 8119 +91 75748 39945
IND17.5519/U/E