Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Serie 9800

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

9800 Series

RATINGS
Off-highway Series 9800

Straight-Thru Model Input Power hp (kW) Input Torque lb-ft (N•m) Turbine Torque Net
gross net gross net lb-ft (N•m)
S9805 Oil Field Pumping
1600 (1193) 1500 (1119) 5000 (6779) 4725 (6406) 6700 (9804)
(Twin Installation)

S9806 Oil Field Pumping 1750 (1305) 1600 (1193) 5250 (7118) 4870 (6603) 7000 (9491)

S9820 Oil Field Pumping 2350 (1752) 2250 (1678) 6300 (8542) 6100 (8270) 7550 (10,235)

ENGINE INTERFACE
Acceptable full-load engine governed speed 1800 – 2100 rpm
Minimum engine idle speed range (with transmission in Drive) 550 rpm

MOUNTING
Direct SAE No. 0 automatic flywheel housing with flexplate drive. Cradle mount using engine flywheel housing mounting pads
and transmission rear cover mounting pads with 0.625-11 inch series bolts
Remote Side pads on transmission rear cover plus front trunnion mount

TORQUE CONVERTER MECHANICAL RATIOS (Gear ratios do not include torque converter multiplication)
Type Single stage, three element, polyphase. Range

Model Stall Torque Ratio Kp-Factor* at Stall First 3.75 : 1


TC-1060 1.86 39.1 (33.6) Second 2.69 : 1
TC-1070 1.78 30.5 (26.2) Third 2.20 : 1
TC-1078 1.84 28.6 (24.5) Fourth 1.77 : 1
TC-1080 1.61 25.8 (22.2) Fifth 1.58 : 1
Sixth 1.27 : 1
Seventh 1.00 : 1
Eighth 0.72 : 1
Reverse Not Available
* Kp-Factor defines torque converter capacity. Kp = the ratio of converter pump Ratio Coverage
speed [rpm] divided by the square root of the pump torque [lb-ft (N•m)]
Forward 5.21

CONTROL SYSTEM
Description Manual electric

9800-120803
OPTIONAL ENGINE-DRIVEN POWER TAKE-OFF PROVISION1
Side mount
Location 5 o’clock position, as viewed from rear
PTO drive gear rating Intermittent 59 tooth drive gear, 400 hp (298 kW)
Continuous 59 tooth drive gear, 300 hp (224 kW)
Top Mount
Location 12 o’clock position, as viewed from rear
PTO drive gear rating Intermittent 59 tooth drive gear, 400 hp (298 kW)
Continuous 59 tooth drive gear, 300 hp (224 kW)

ELECTRONIC SPEEDOMETER PROVISION


Off-highway Series 9800

Description Magnetic speed sensor, 41 pulses per output shaft revolution

Location Output signal from transmission TCM

SIZE
Depth (below horizontal centerline) 20.9 in (531 mm)
Length (direct mount) 2,3
55.5 in (1411 mmn)
Width 35.1 in (892 mm)
Height Dry Weight
Basic model 35.3 in (896 mm) 3700 lb (1678 kg)
With direct mount filters 39.8 in (1011 mm) 3700 lb (1678 kg)
With top engine-driven PTO drive gear 3730 lb (1692 kg)
With remote mount 3780 lb (1714 kg)

OIL SYSTEM
Oil type TES 439, (See “www.allisontransmission.com” for approved list)
Capacity excluding external circuits 21.0 gallons (79 litres)
Main circuit oil filter
Standard Manifold for full-flow, remote mounted, Replaceable element
Optional Direct-mount full flow, replaceable elements (2)
Cooler circuit oil filter (optional) Replaceable element, remote-mounted
1. PTO ratings apply to both top and side. Combined totals cannot exceed individual ratings.
2. For remote mounting, add 11 in (279 mm).
3. Length is approximate from engine/converter mounting surface to face of typical output flange.

9000 Series

Information or specifications subject to change without notice or obligation.

www.allisontransmission.com

You might also like