Specification Item no.

: T60404-N4647-X664
VACUUMSCHMELZE

K-No.: 26872 50A Current Sensor Date: 04.02.2022

For the electronic measurement of currents:
DC, AC, pulsed, mixed with a galvanic Isolation
between the primary circuit (high power) and the
secondary circuit (electronic circuit)

Customer: Standard Type Customers Part no: Page 1 of 3

Description Characteristics Applications
• Closed loop (compensation) • excellent accuracy Mainly used for stationary operation in industrial
Current Sensor with • very low offset current applications:
magnetic probe • very low temperature dependency and • AC variable speed drives and servo motor
• Printed circuit board offset current drift drives
mounting • very low hysteresis of offset current • static converters for DC motor drives
• Casing and materials UL- • short response time • Battery supplied applications
listed • wide frequency bandwidth • Switched Mode Power Supplies (SMPS)
• compact design • Power supplies for welding applications
• reduced offset ripple • Uninterruptable Power Supplies (UPS)
Electrical data - Ratings
IPN Primary nominal RMS current 50 A
VOUT Output voltage @ IP VREF ± (0.625*IP/IPN) V
VOUT Output voltage @ IP=0A, A=25°C VREF ± 0.000725 V
VREF External Reference voltage range 0…4 V
Internal Reference voltage 2.5 ± 0.005 V
KN Transformation ratio 1…3 : 1400
Accuracy – Dynamic performance data min. typ. max. Unit
IP,max Max. measuring range ±150 A
X Accuracy @ IPN, A = 25°C ±0.7 %
L Linearity ±0.1 %
VOUT-VREF Offset voltage @ IP = 0A, A = 25°C ±0.725 mV
VO/VREF/ Temperature drift of VOUT @ IP=0A, VREF=2.5V, A 0.7 7 ppm/°C
tr Response time 0.3 µs
tra Reaction time at di/dt = 100 A/µs 0.2 µs
f Frequency bandwidth DC…200 kHz
General data
A Ambient operation temperature -40 85 °C
S Ambient storage temperature (acc. to M3101) -40 85 °C
m Mass 12 g
VC Supply voltage 4.75 5 5.25 V
IC Supply current at IP = 0A and RT 15 mA

1)s Clearance (component without solder pad) 7.4 mm

clear
1)s Creepage (component without solder pad) 8.0 mm
creep
1)U System voltage *overvoltage category 3 300 VRMS
sys
1)U Working voltage *acc. table 7, overvoltage category 2 650 VRMS
AC
1)U Rated discharge voltage 1320 VPEAK
PD

According to UL 508: max. potential difference 600 VAC

1)Constructed and manufactured and tested in accordance with EN 61800-5-1:2003 (primary to secondary)
Reinforced insulation, Insulation material group 1, Pollution degree 2

The current sensor passed the EMI susceptibility tests (vertical and horizontal, one direction) according to
the standard 61000-4-3:2010 at 20V/m, 80%AM@1kHz over the frequency range of 80MHz to 1000MHz, level a)
with <2% variation of the Vout during the stress

Date Name Issue Amendment

04.02.2022 NSch. 81 Applicable documents change on sheet 3. „The color of the plastic material… added. Minor change

Hrg.: R&D-PD NPI Bearb.: DJ MC-PM: Sn. freig.: SB

editor designer check released
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts Copying of this document, disclosing it to third parties or using the contents there for any
nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu purposes without express written authorization by use illegally forbidden.
Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten Any offenders are liable to pay all relevant damages
 Specification Item no.: T60404-N4647-X664
VACUUMSCHMELZE

K-No.: 26872 50A Current Sensor Date: 04.02.2022

For the electronic measurement of currents:
DC, AC, pulsed, mixed with a galvanic Isolation
between the primary circuit (high power) and the
secondary circuit (electronic circuit)

Customer: Standard Type Customers Part no: Page 2 of 3

Mechanical outline (mm): General tolerances DIN ISO 2768-c Connections:
6 4
Pin Nr. 1-6: Ø1mm
Tolerances grid distance
7 ±0.2 mm Pin Nr. 7-10: 0.46 x 0.46mm
<14 12.7
10 Marking:
1 3
22.2 UL-sign 4647-X664
F DC
Marking 10

24

0.5
+0 .5
Ø1.0 3.5 - 0 .3
1.84 2.14
7.62 1.905 0.46x0.46
12 2.54 5.72

DC = Date Code [Format YWW]

F = Factory

Schematic diagram:

680 10 VC
int REF

7 V ref IN / OUT
Ip 40k
+ 10k
1...3 +
10
RM OUT 8 Vout
10k
-
1nF
40k

9 GND
4...6

Hrg.: R&D-PD NPI Bearb.: DJ MC-PM: Sn. freig.: SB

editor designer check released
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts Copying of this document, disclosing it to third parties or using the contents there for any
nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu purposes without express written authorization by use illegally forbidden.
Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten Any offenders are liable to pay all relevant damages
 Specification Item no.: T60404-N4647-X664
VACUUMSCHMELZE

K-No.: 26872 50A Current Sensor Date: 04.02.2022

For the electronic measurement of currents:
DC, AC, pulsed, mixed with a galvanic Isolation
between the primary circuit (high power) and the
secondary circuit (electronic circuit)

Customer: Standard Type Customers Part no: Page 3 of 3

Electrical data: (investigate by a type checking) min. typ. max. Unit
VC,tot maximum supply voltage (without function) 7 V
IC Supply Current with primary current 15mA+IP*KN+VOUT/RL mA
IOUT,SC Short circuit output current ±20 mA
RP Resistance per primary winding @ A=25°C 1 m
RS Secondary coil resistance @ A = 85°C 35
Ri,REF Internal resistance of Reference output 680
Ri,Vout Output resistance of VOUT 10
RL External recommended resistance of VOUT 1 k
CL External recommended capacitance of VOUT 1 nF
XTi / Temperature drift of X @ A = -40°C ... 85°C 40 ppm/K
VO= (VOUT-VREF) Sum of any offset drift including: 2 6 mV
VOt Long term drift of VO 1 mV
VOT Temperature drift of VO @ A = -40°C…85°C 1 mV
VOH Hysteresis of VOUT @ IP=0A (caused by IP = 10 x IPN) 1 mV
VO/ VC Supply voltage rejection ratio 1 mV/V
vOSS Offsetripple (with 1 MHz-Filter, first order) 35 mVPP
vOSS Offsetripple (with 100 kHz-Filter, first order) 4 mVPP
vOSS Offsetripple (with 20 kHz-Filter, first order) 1.5 mVPP
Maximum possible coupling capacity
Ck 5 pF
(primary - secondary)
Mechanical stress according to M3209/3
5 g
Settings: 10-2000Hz, 1min/oct, 2 hours

Routine-Tests: (Measurement after temperature balance of the samples at room temperature, SC=significant characteristic)
VOUT (SC) (100%) M3011/6: Output voltage 625 ± 0.7% mV
VOUT-VREF (100%) M3226: Offset voltage ±0.725 mV
Ud (100%) M3014: Test voltage, 1s 1.5 kVRMS
UPDE 1.4
(AQL 1/S4) M3024: Partial discharge voltage (extinction) kVRMS
UPD*1.875 1.75

Type-Tests: (Precondition acc. to M3236)

ÛW HV transient test acc. to M3064 (1.2µs / 50µs-Waveform) 6 kV
Ud Test voltage acc. to M3014 (5s) 3 kVRMS
UPDE Partial discharge voltage (extinction) 1.4
kVRMS
UPD*1.875 acc. to M3024 1.75

Other instructions:
- Current direction: A positive output voltage vs. VREF appears at point VOUT, if primary current flows in direction of
the arrow sign on Sensor package.
- Temperature of the primary conductor should not exceed 105°C.
- Housing and bobbin material UL-listed: Flammability class 94V-0.
- Further standards: UL 508 file E317483, category NMTR2 / NMTR8
- The color of the plastic material is not specified and the current sensor can be supplied in different colors
(e.g. brown, black, white, natural). This has no effect on the specifications or UL approval

Hrg.: R&D-PD NPI Bearb.: DJ MC-PM: Sn. freig.: SB

editor designer check released
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts Copying of this document, disclosing it to third parties or using the contents there for any
nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu purposes without express written authorization by use illegally forbidden.
Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten Any offenders are liable to pay all relevant damages