Chloride UPS Systems

WORLD HEADQUARTERS
Via Fornace 30
40023 Castel Guelfo (BO)
Italy
Telephone: +39 0542 632 111
Facsimile: +39 0542 632 120
enquiries@chloridepower.com

Closest Chloride Contact:

POWER PROTECTION
www.chloridepower.com

Cert No FM 10144

This publication is issued to provide outline

information only and is not deemed to form any
part of any offer and contract.The company has a
policy of continuous product development and
improvement, and we therefore reserve the right
to vary any information without prior notice.
MKA4L0UK70NET
Rev. 1/11-2003
 70-NET
from 10 to 60 kVA POWER PROTECTION
 The Range • Modular parallel scalable configurations,
allowing the increase of on-site power.
Chloride’s 70-NET family is available from
10 to 60 kVA in three-phase output ver- Communication
sions. Batteries, available in a wide range 70-NET is installed with a voltage-free
of autonomies, are included in the UPS cab- contact port, two serial ports and two
inet as standard (10-40kVA only). internal slots for: ManageUPSNET (with
Flexibility for Customised Solutions SNMP capability and IP network interface),
MopUPS shutdown and monitoring
70-NET uses intelligent double conversion
software and LIFE.net modem.
technology meaning users can select from
A liquid crystal display further facilitates
the following operating modes:
interaction with your UPS.
70 - NET from 10 to 60 kVA
• Double conversion: reducing network Advanced Battery Care helps maintain
disturbances to a minimum. optimum battery condition via regular
• Digital interactive: allowing significant status checks.
energy savings through high power 70-NET is also compatible with Chloride’s
efficiency. Battery Management System (BMS)
Separate bypass input terminals and top providing continuous monitoring of
cable entry (on 50-60 kVA) provide maxi- individual battery cells.
mum flexibility during installation. Monitoring
Special versions including full galvanic
The 70-NET family is fully compatible with
isolation transformer (400V/400V/50Hz,
LIFE.net, Chloride’s remote monitoring tool.
T version and 208V/208V/60Hz, LAM
This service provides:
version) are available and are fully
• Automatic transmission of a daily status
integrated into the UPS cabinet.
report.
Leading Technology • Continuous real time UPS monitoring
Patented Vector Control technology and diagnosis.
increases power component performance • A remote fix capability.
and enables active conditioning of the • Regular UPS Operational status report
load. Vector control provides: supplied via post or email.
• Detailed operation history of the full
• Improved performance for specific service LIFE of the UPS system.
unbalanced load conditions. • ETS function for trouble-shooting of the
• Perfect load distribution between parallel most common operating anomalies.
connected UPS. • Power Quality Monitoring to effectively
• Improved fault clearing capacity for monitor power disturbance trends.
downstream short circuits.
• Customisation easily achieved via simple Applications
software modifications. 70-NET provides secure power infra-
• Improved efficiency through reduced structure for a wide range of applications
installation times and ease of servicing. including:
Active input Power Factor Correction • Storage Networks
(PFC) is another key feature of the 70-NET. • Commercial Processing Systems
This means units only absorb active • IT networks
power, through an input power factor • Enterprise servers
>0.95. Reduced installation and operating Secure Power Always
costs result.
Supplying you with a UPS alone will never
70-NET also features Total Harmonic deliver the level of business continuity
Distortion (THDi) correction. you require. Chloride offers a range of
70-NET will correct input THDi to less maintenance plans which will:
than 8%, without requiring additional
• Help deliver reliability to your load
options, allowing perfect compatibility
• Extend the life of your power protection
with upstream distributions and preserving
equipment
UPS power conversion efficiency (10-40
• Optimise your capital expenditure
kVA versions only).
• Provide risk management at a fixed cost
Reliability and Scalability • Provide a pro-active approach to disaster
Up to 8 three-phase 70-NET units can be recovery
connected in parallel. We are able to Contact your local Chloride sales office
customise and adapt our solution as load for more information.
requirements change. Through fully inte- Delegate your power management
grated digital control, 70-NET allows: to the experts.
• Modular parallel redundant configurations
N+1.
 POWER PROTECTION

RATING 10 15 20 30 40 50 60
Nominal power rating@ 40°C (kVA) 10 15 20 30 40 50 60
Nominal power rating@ 25°C (kVA) 11 16,5 22 33 44 55 66
INPUT
Nominal input voltage (V) 400 (380 V, 415 V selectable) three-phase + neutral
Input voltage tolerance
• Full output load (%) -30/+15 -30/+15 -25/+15 -25/+15 -25/+15 -25/+15 -25/+15
• 75% output load (%) -30/+15 -30/+15 -30/+15 -30/+15 -30/+15 -30/+15 -30/+15
Nominal frequency (Hz) 50/60 [selectable]
Frequency tolerance (%) ± 10%
Input Power Factor @ nominal input voltage > 0.95
Input current distortion (%) <8 <8 <8 <8 <8 < 10 (1) < 10 (1)
Nominal reserve voltage (V) 400 (380 V, 415 V selectable) three-phase + neutral
Reserve frequency tolerance (%) ±2 [0,2 to 6 selectable]
OUTPUT
Nominal output voltage (V) 400 (380 V, 415 V selectable) three-phase + neutral
Nominal output frequency (Hz) 50 (60 selectable)
Output Power Factor 0.8
Output voltage stability for load variation 0 – 100%
• Static (%) ±1
• Dynamic Complies with IEC/EN 62040-3, Class 1
Output frequency stability
• With mains synchronism (%) ±1 [2, 3, 4 selectable]
• With internal quartz oscillator (%) 0,1
Inverter overload capacity
• For 5 minutes (%) 125
• For 30 seconds (%) 150
Automatic nominal output power adjusting
with temperature 110% at 25°C, 100% at 40°C
BATTERY CHARGER
Battery ripple current (%) < 0,01 C10
Charging current (A) / (Expandability) 5(+5) 5(+5) 5(+5) 5(+5) 10(+10) 10(+10) 10(+10)
GENERAL
AC/AC efficiency – Digital Interactive mode (%) > 97
AC/AC efficiency – Double Conversion mode (%) > 91 > 91 > 91 > 91 > 91 > 92 > 92
Operating temperature (°C) 0 - 40
Maximum relative humidity @ 20°C
(not condensing) (%) < 90
Maximum noise level @ 1 meter (dBA) < 50 < 50 < 50 < 52 < 52 < 55 < 55
EMC class (EN 50091-2) (10 - 40) Class A (50 - 60) Class RS
Degree of protection IP 21 IP 20
Frame colour (RAL scale) 7035
Cable entry Bottom/Side Top/Bottom/Side
Equipment mobility On casters Fixed
DIMENSIONS AND WEIGHT
Height (mm) 1400 1400 1400 1600 1600 1780 1780
Width (mm) 500 500 500 550 550 620 620
Depth (mm) 800 800 800 800 800 835 835
Weight (Kg) w/o batteries 145 145 145 190 210 260 260

Notes: (1) With low input THD option.