Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 7

4.1 Reinforced4.

1Reinforced concrete class C-25, filled into formwork and vibrated around reinforcement ro
a/ In R.C. t a/ In R.C. top tie
b/ In 6x. 2 b/ In 6x. 25 cm R.C. Window sill
4.2 Provide cut4.2Provide cut & fix in position steel reinforcement bar according to drawing, cut, bent and pla
(2) 6mm pl(2) 6mm plain bars
e 12 mm dee 12 mm deformed bars
4.3 Provide cut4.3Provide cut and fix in position sawn zigba wood formwork or equivalent for:
sides of th sides of the top tie beam
b/ sides of b/ sides of window sill
Total Carr Total Carried to Summary:
5. Concret 5. Concrete Hollow Block Work
5.1 20 X 20 x 45.120 X 20 x 40 em concrete hollow block (Class B) walling bedded in cement mortar 1:3. Inter
5.2 Ditto as it 5.2Ditto as item 5.1. but 15 X 20 X 40 cm (Class B)
Total Carr Total Carried to Summary
6. Roofing 6. Roofing
6.4 G-30 galvan6.4G-30 galvanized corrugated iron sheet roofing fixed to 5 X 7 cm zigba purlins at c/c 90cm an
62 Fix roof e 62Fix roof end closer in 0.4mm galvanized sheet flashing development length 150mm
Total Carr Total Carried to Summary:
7 Carpentry7 Carpentry and Joiner
7.1 All structu 7.1All structural members shall be well seasoned, straight and free of any harmful defects. Eac
of 010-12 of 010-12 cm eucalyptus lower/upper member.
b/ 0 8-10 b/ 0 8-10 cm eucalyptus bracing and internal members
c/ 5 7 cm zc/ 5 7 cm zigba purlins
7.2 Supply and7.2Supply and fix 25 X 2.5cm kararo or equivalent fascia board including three coats of weathe
7.3 8mm thick 7.38mm
c thick chipwood ceiling of best quality price includes 4/5cm-zigba batten on both ways
ted around reinforcement rods, Reinforcement and formwork are measured separately

g to drawing, cut, bent and placed in position the unit price shall include cutting, bending and placing in position

equivalent for:

d in cement mortar 1:3. Internal walls are left for plastering and external walls are left for pointing

m zigba purlins at c/c 90cm and 0 8-10 cm eucalyptus trusses Each truss shall be firmly fixed with O 6mm plain bars to concrete
ment length 150mm

ee of any harmful defects. Each truss joint shall be connected with band iron and truss shall be firmly anchored to concrete to ti

cluding three coats of weather resistant paint.


cm-zigba batten on both ways de 50cm, corner list and all necessary accessories ( the materials should be approved by the clien
ing in position

O 6mm plain bars to concrete tie beam and column, all done according to roof truss drawing, Unit price includes G-28 flat meta

mly anchored to concrete to tie beam with 0 6mm plain bars. Price includes approved 3 coats of anti termite paint to trusses &

ould be approved by the client).


t price includes G-28 flat metal roof ridge cover and 3 coats of wood preservative paint to all truss members and roof purlins Ho

nti termite paint to trusses & purlins.


members and roof purlins Horizontal projection of roof area shall be taken for measurement Purlins & roof trusses shall be me
lins & roof trusses shall be measured separately
4.1 Reinforced concrete class C-25, filled into formwork and vibrated around reinforcement rods.
a) In R.C. top tie
b) In 6x25 cm R.C. Window sill
4.2 Provide cut & fix in position steel reinforcement bar according to drawing.
a) dia 6mm plain bars
b) dia 12 mm deformed bars
4.3 Provide cut and fix in position sawn zigba wood formwork:
a) sides of the top tie beam
b) sides of window sill
5. Concrete Hollow Block Work
5.1 20 X 20 x 40 cm concrete hollow block (Class B).
5.2 Ditto as item 5.1. but 15 X 20 X 40 cm (Class B)
6. Roofing
6.1 G-30 galvanized CIS roofing
6.2 Fix roof end closer in 0.4mm galvanized sheet flashing development length 150mm
7 Carpentry and Joiner
7.1 All structural members shall be well seasoned, straight and free of any harmful defects.
a) dia 10-12 cm eucalyptus lower/upper member.
b/ dia 8-10 cm eucalyptus bracing and internal members
c) 5x7 cm zigba purlins
7.2 Supply and fix 25 X 2.5cm kararo or equivalent fascia board
7.3 8mm thick chipwood ceiling.

You might also like