AC/DC Converter

LO05-12Bxx Series
5W, AC-DC converter FEATURES
 165 - 264V Universal AC or wide 230 - 370V DC Input
 Operating ambient temperature range: -25℃ to +70℃
 High I/O isolation voltage up to 3000VAC
 Regulated output, low ripple & noise
 Output short circuit, over-current protection
 High efficiency, high reliability
 2 years warranty
RoHS
 Safety according to UL/EN/IEC62368
LO05-12Bxx series is one of Mornsun’s compact size power converter. It features universal AC input and at the same time accepts DC input
voltage, high efficiency, high reliability, reinforced isolation. It offers good EMC performance compliant to IEC/EN61000-4 and
CISPR32/EN55032 and meets UL/EN/IEC62368 standards. The converters are widely used in industrial, office and civil applications. For
extremely harsh EMC environment, we recommend using the application circuit show in Design Reference of this datasheet.

Selection Guide
Nominal Output Voltage and Current Efficiency at 230VAC
Part No. Output Power Capacitive Load (µF) Max.
(Vo/Io) (%) Typ.
LO05-12B03 3.3W 3.3V/1000mA 66 4000
LO05-12B05 5V/1000mA 73 3400
LO05-12B09 9V/550mA 76 1200
LO05-12B12 5W 12V/420mA 78 1000
LO05-12B15 15V/330mA 80 680
LO05-12B24 24V/210mA 82 270

Input Specifications
Item Operating Conditions Min. Typ. Max. Unit
AC input 165 -- 264 VAC
Input Voltage Range
DC input 230 -- 370 VDC
Input Frequency 47 -- 60 Hz
165VAC -- -- 125
Input Current mA
230VAC -- -- 80
165VAC -- 13 15
Inrush Current A
230VAC -- 20 25
Leakage Current 240VAC/50Hz 0.25mA RMS typ.
Recommended External Input Fuse 1A/250V, slow-blow, required
Hot Plug Unavailable

Output Specifications
Item Operating Conditions Min. Typ. Max. Unit
3.3V output -- ±6 --
Output Voltage Accuracy
Other output -- ±5 --
3.3V output -- ±2.5 -- %
Line Regulation Full load
Other output -- ±1.5 --
Load Regulation 10%-100% Load -- ±3 --
(Load balancing) -- 50 150 mV
Ripple & Noise* 20MHz bandwidth (peak-to-peak value)
Stand-by Power Consumption -- -- 0.5 W
Temperature Coefficient -- ±0.02 -- %/°C
Short Circuit Protection Hiccup, continuous, self-recovery
Over-current Protection ≥130%Io, self-recovery

2022.03.16-A/3 Page 1 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
AC/DC Converter
LO05-12Bxx Series

Minimum Load 10 -- -- %
165VAC input -- 5 --
Hold-up Time ms
230VAC input -- 35 --
Note: *The “Tip and barrel method” is used for ripple and noise test, please refer to AC-DC Converter Application Notes for specific information.

General Specifications
Item Operating Conditions Min. Typ. Max. Unit
Isolation Test Input-output Electric Strength Test for 1min., leakage current <5mA 3000 -- -- VAC
Operating Temperature -25 -- +70
°C
Storage Temperature -40 -- +85
Storage Humidity -- -- 90 %RH
Wave-soldering 260 ± 5℃; time: 5 - 10s
Soldering Temperature
Manual-welding 360 ± 10℃; time: 3 - 5s
Switching Frequency -- 65 -- kHz
-25℃ to -10℃ 1.0 -- --
Power Derating %/℃
+50℃ to +70℃ 3.0 -- --
Safety Standard Design refer to UL/EN/IEC62368-1
Safety Class CLASS Ⅱ
MTBF MIL-HDBK-217F@25°C > 300,000 h

Mechanical Specifications
Dimension 42.00 x 16.00 x 17.00 mm
Weight 9g(Typ.)
Cooling method Free air convection

Electromagnetic Compatibility (EMC)

CISPR32/EN55032 CLASS A
CE
CISPR32/EN55032 CLASS B (See Fig. 2 for recommended circuit)
Emissions
CISPR32/EN55032 CLASS A
RE
CISPR32/EN55032 CLASS B (See Fig. 2 for recommended circuit)
ESD IEC/EN61000-4-2 Contact ±6 KV Perf. Criteria B
RS IEC/EN61000-4-3 10V/m (See Fig. 2 for recommended circuit) Perf. Criteria A
EFT IEC/EN61000-4-4 ±2KV (See Fig. 2 for recommended circuit) Perf. Criteria B

Immunity Surge IEC/EN61000-4-5 line to line ±1KV (See Fig. 2 for recommended circuit) Perf. Criteria B
CS IEC/EN61000-4-6 10Vr.m.s Perf. Criteria A
Voltage dips, short
IEC/EN61000-4-11 100% dip 1 periods, 30% dip 25 periods,
interruption and voltage Perf. Criteria B
100% interruptions 250 periods
variations

Product Characteristic Curve

Note: ①This product is suitable for applications using natural air cooling; for applications in closed environment please consult Mornsun FAE.

2022.03.16-A/3 Page 2 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
AC/DC Converter
LO05-12Bxx Series
(Vin=230VAC)

Design Reference
1. Typical application

Fig. 1: Typical circuit diagram

Part no. C1 (µF) C2 (µF) FUSE MOV TVS

LO05-12B03 150 SMBJ7.0A
LO05-12B05 150 SMBJ7.0A
1A/250V,
LO05-12B09 120 SMBJ12A
1 slow-blow, S14K300
LO05-12B12 120 SMBJ20A
required
LO05-12B15 120 SMBJ20A
LO05-12B24 68 SMBJ30A

Output Filter Components:

We recommend using an electrolytic capacitor with high frequency, and low ESR rating for C2 (refer to manufacture’s datasheet). Choose a capacitor voltage
rating with at least 20% margin, in other words not exceeding 80%. C1 is a ceramic capacitor used for filtering high-frequency noise and TVS is a recommended
suppressor diode to protect the application in case of a converter failure.

2. EMC compliance recommended circuit

Mornsun P/N: FC-LX1D

Fig. 2: EMC application circuit with higher requirements

Component Recommended value

MOV S14K300
CX 0.1µF/275VAC
LCM 10mH, we recommend using part no. FL2D-Z5-103 (MORNSUN)
FUSE 1A/250V, slow-blow, required
R0 33Ω/3W

3. For additional information please refer to application notes on www.mornsun-power.com.

2022.03.16-A/3 Page 3 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
AC/DC Converter
LO05-12Bxx Series

Dimensions and Recommended Layout

Note:
1. For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58220058;
2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75% with nominal
input voltage and rated output load;
3. All index testing methods in this datasheet are based on our company corporate standards;
4. We can provide product customization service, please contact our technicians directly for specific information;
5. Products are related to laws and regulations: see "Features" and "EMC";
6. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by
qualified units.

Mornsun Guangzhou Science & Technology Co., Ltd.

Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Huangpu District, Guangzhou, P. R. China
Tel: 86-20-38601850 Fax: 86-20-38601272 E-mail: info@mornsun.cn www.mornsun-power.com

2022.03.16-A/3 Page 4 of 4
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation