® No.

6-634
Eaton October, 1995

Gear Pumps

Parts Information

Series 26
Model 26000 Single Gear Pumps
Series 26 - Model 26000 Single Gear Pumps

Pump Parts Drawing

Righthand (CW) pump rotation shown.
11
14b
17

1
4D 25

4A
10

40
Plug
4B 14a

8
3
12
13
7

4C

2
Backplate
See pages 4 and 5

2
Series 26 - Model 26000 Single Gear Pumps

Pump Parts List

Item Part
No. Number Description Qty.
1 Frontplate Assembly 1
26000 -500 Left-hand or Right-hand Rotation
2 Backplate (see pages 4 and 5) 1
3 ∆ Body Assembly 1
4A ∆ Drive Gear Assembly (5/8 inch 9 Tooth Spline Shaft) 1
4B ∆ Drive Gear Assembly (3/4 inch 11 Tooth Spline Shaft) 1
4C ∆ Drive Gear Assembly (3/4 inch Straight Keyed Shaft) 1
4D ∆ Drive Gear Assembly (5/8 inch Straight Keyed Shaft) 1
5 ∆ Idler Gear Assembly 1
~ 7 26000 -550 Wear Plate 1
~ 8 25300 -659 O-ring (Used with plain backplate only) 2
~ 8 16007 -513 O-ring (Used with R/V, F/D, Tandem F/D & Tandem backplates) 2
~ 9 15147 -281 Shaft Seal (Standard) 1
9 16252 -112 Shaft Seal (Viton) 1
~ 10 16048 -27 Washer 1
11 ∆ Cap Screw 8
~ 12 26000 -552 Backup Gasket 1
~ 13 26000 -551 Seal 1
13 26000 -553 Seal (Viton) 1
14a 15511 -568 Key for Straight Shaft 1
14b 24300 -626 Key for Straight Shaft 1
~ 17 25300 -674 Washer 4
25 16077 -22 Retaining Ring 1
~ 40 26000 -554 Plug 1
~ 26000 -901 Seal Kit
∆ – See table, below, for specific part number
~ – Parts included in Seal Kit

Item No. 3 Item No. 4A Item No. 4B Item No. 4C Item No. 4D Item No. 5 Item No. 11
Displacement Body 5/8 in. Spline 3/4 in. Spline 3/4 in. Keyed 5/8 in. Keyed Idler Cap
cm3/r [in3/r] Assembly Shaft Shaft Shaft Shaft Gear Screw
6,6 [.40] 26001 - 101 26001 - 203 26001 - 205 26001 - 207 26001 - 211 26001 - 201 16119 - 520
8,2 [.50] 26002 - 101 26002 - 203 26002 - 205 26002 - 207 26002 - 211 26002 - 201 16119 - 520
9,5 [.58] 26003 - 101 26003 - 203 26003 - 205 26003 - 207 26003 - 211 26003 - 201 16119 - 521
10,8 [.66] 26004 - 101 26004 - 203 26004 - 205 26004 - 207 26004 - 211 26004 - 201 16119 - 522
13,8 [.84] 26005 - 101 26005 - 203 26005 - 205 26005 - 207 26005 - 211 26005 - 201 16119 - 522
16,7 [1.02] 26006 - 101 26006 - 203 26006 - 205 26006 - 207 26006 - 211 26006 - 201 16119 - 524
19,7 [1.20] 26007 - 101 26007 - 203 26007 - 205 26007 - 207 26007 - 211 26007 - 201 16119 - 524
22,5 [1.37] 26008 - 101 26008 - 203 26008 - 205 26008 - 207 26008 - 211 26008 - 201 16119 - 526
24,3 [1.48] 26009 - 101 26009 - 203 26009 - 205 26009 - 207 26009 - 211 26009 - 201 16119 - 526
25,2 [1.54] 26010 - 101 26010 - 203 26010 - 205 26010 - 207 26010 - 211 26010 - 201 16119 - 526
27,7 [1.69] 26011 - 101 26011 - 203 26011 - 205 26011 - 207 26011 - 211 26011 - 201 16119 - 530
29,0 [1.77] 26012 - 101 26012 - 203 26012 - 205 26012 - 207 26012 - 211 26012 - 201 16119 - 530
30,6 [1.87] 26013 - 101 26013 - 203 26013 - 205 26013 - 207 26013 - 211 26013 - 201 16119 - 530

3
Series 26 - Model 26000 Single Gear Pumps

Backplate Drawings
Plain Backplate Flow Divider Backplate
2A
22A
22 21B

2C

19A
19A4
19A3
Relief Valve Backplate 19A2
19A1
2B
20

19A 19A4
19A4 23 19A3
19A3 19A2
19A2 19B1
19A1 24
19B
21B
21
21A

29A Tandem Backplate

29
29B
35
27 2D
26 30
33
34
32
18
38 37
2E
36

Tandem Flow Divider Backplate 20A

23A
28
24
28B
28A

4
Series 26 - Model 26000 Single Gear Pumps

Backplate Parts List

Item Part
No. Number Description Qty.
2A Plain Backplate 1
26000 - 02 Side Ports – 1 5/16-12 Suction, 7/8-14 Pressure
26000 - 03 Rear Ports – 1 5/16-12 Suction, 7/8-14 Pressure
26000 - 04 Side Ports – 1 1/16-12 Suction, 7/8-14 Pressure
26000 - 05 Rear Ports – 1 1/16-12 Suction, 7/8-14 Pressure
2B Relief Valve Backplate 1
26100 - 07 Side Ports – 1 1/16-12 Suction, 7/8-14 Pressure, 7/8-14 Drain
26100 - 03 Side Ports – 1 1/16-12 Suction, 7/8-14 Pressure, Internal Drain
2C Flow Divider Backplate 1
26200 - 02 Side Ports – 1 5/16-12 Suction, 3/4-16 Priority, 7/8-14 Secondary
26200 - 03 Rear Ports – 1 5/16-12 Suction, 3/4-16 Priority, 7/8-14 Secondary
2D Tandem Flow Divider Backplate 1
26400 - 03 Side Ports – 1 1/16-12 Suction, 3/4-16 Priority, 7/8-14 Secondary
2E Tandem Backplate 1
26400 - 02 Side Ports – 1 1/16-12 Suction, 7/8-14 Pressure
18 16015 - 5 - 90 O-ring 3
19A ∆ Relief Valve Assembly 1
19A1 NSS Relief Valve 1
~ 19A2 16015 - 17 O-ring 1
~ 19A3 16235 - 111 Backup Ring 1
~ 19A4 16003 - 11 O-ring 1
19B 33100 - 301 Plug Assembly 1
19B1 NSS Plug 1
20 ∆ Flow Divider Spool 1
20A 24330 - 604 Spool for Tandem Flow Divider Backplate
21 15440 - 303 Plug/O-ring Assembly 1
21A NSS Plug 1
~ 21B 16003 - 12 - 90 O-ring 2
22 16224 - 05 Plug/O-ring Assembly 1
22A NSS Plug 1
23 17046 - 20 Spring 1
23A 15511 - 142 Spring for Tandem Flow Divider Backplate 1
24 15511 - 141 Shim (.0239 inch thick) A/R
~ 26 16015 - 18 - 90 O-ring 1
27 15511 - 430 Plug 1
28 16224 - 09 Plug/O-ring Assembly 1
28A NSS Plug 1
~ 28B 16003 - 12 - 90 O-ring 2
29 16225 - 05 Plug/O-ring Assembly 1
29A NSS Plug 1
29B 16003 - 9 - 90 O-ring 1
30 32015 - 24 Relief Valve Spring 1
32 15511 - 110 Sleeve 1
33 15511 - 473 Spring 1
34 32015 - 51 Poppet 1
35 16048 - 35 Shim Washer (.010 inch thick) A/R
36 25340 - 601 Tandem Cover Plate 1
37 16015 - 38 O-ring 1
38 16032 - 606 Cap Screw 2
∆ – See tables on page 6 for specific part numbers
NSS – Not Sold Separately
A/R – As Required
~ – Parts included in Seal Kit
5
Series 26 - Model 26000 Single Gear Pumps

Backplate Parts List

Item No. 19A – Relief Valve Assembly

Part Pressure Setting
Number (bar [lbf/in2])
32080 - AA 34.5 [500]
32080 - BA 51.7 [750]
32080 - CA 68.9 [1000]
32080 - EA 86.2 [1250]
32080 - GA 103.4 [1500]
32080 - JA 120.6 [1750]
32080 - LA 137.9 [2000]
32080 - NA 155.1 [2250]
32080 - QA 172.4 [2500]

Item No. 20 – Flow Divider Spool

Part Flow Setting
Number (l/min [gal/min])
26200 - 600 3.8 [1.00]
26200 - 601 5.7 [1.50]
26200 - 602 7.6 [2.00]
26200 - 603 9.5 [2.50]
26200 - 604 11.4 [3.00]
26200 - 605 13.3 [3.50]
26200 - 606 15.1 [4.00]
26200 - 607 17.0 [4.50]
26200 - 607 18.9 [5.00]
26200 - 608 20.8 [5.50]
26200 - 609 22.7 [6.00]

6
Series 26 - Model 26000 Single Gear Pumps

Pump Identification Number

Stamped on each units mounting flange.

Product Number: 26 0 01 - R Z A B 95 01 31 JB Serial Number Code:

Series Testers Initials
26 = Gear Pump
( SAE "A" Mount ) Day of Month (two digits)

Features Month (two digits)

0 = Standard Single Pump
1 = Standard Single W/ Relief Last two digits of year built.
2 = Flow Divider Backplate ( 93 for 1993 etc.)
3 = Flow Divider W/ Load Sense
4 = Tandem Backplate Revision level of parts list.
5 = Multiple Pumps

Displacement cm3/r [ in3 /r]

01 = 6.6 [.40] 08 = 22.5 [1.37]
02 = 8.2 [.50] 09 = 24.3 [1.48]
03 = 9.5 [.58] 10 = 25.2 [1.54]
04 = 10.8 [.66] 11 = 27.7 [1.69]
05 = 13.8 [.84] 12 = 29.0 [1.77]
06 = 16.7 [1.02] 13 = 30.6 [1.87]
Each order must include the following
07 = 19.7 [1.20] information.
1. Product and/or Part Number
Input Rotation 2. Serial Number Code
R = Right-hand (clockwise) 3. Part Name
L = Left-hand (Counterclockwise) 4. Quantity
Catalog / Non-Catalog
Z = Cataloged Pump
A-Y = Non-Cataloged Pump

Shafts , Porting Size and Location

Side Ports
A = 3/4 in. 11 Tooth, 1 5/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
C = 3/4 in. Str. Keyed, 1 5/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
E = 3/4 in. 9 Tooth, 1 5/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
G = 5/8 in. Str. Keyed, 1 1/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
J = 5/8 in. 9 Tooth, 1 1/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
L = 5/8 in. Str. Keyed, 1 5/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
N = 3/4 in. 11 Tooth, 1 1/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
R = 3/4 in. Str. Keyed, 1 1/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
Rear Ports
B = 3/4 in. 11 Tooth, 1 5/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
D = 3/4 in. Str. Keyed, 1 5/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
F = 3/4 in. 9 Tooth, 1 5/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
H = 5/8 in. Str. Keyed, 1 1/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
K = 5/8 in. 9 Tooth, 1 1/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
M = 5/8 in. Str. Keyed, 1 5/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
P = 3/4 in. 11 Tooth, 1 1/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure
S = 3/4 in. Str. Keyed, 1 1/16-12 UN-2B Suction, 7/8-14 UNF-2B Pressure

7
 ACCREDITED BY
THE DUTCH COUNCIL
FOR CERTIFICATION
Reg. No. 24

Eaton Corporation Eaton Ltd. Eaton GmbH ISO-9001 CERTIFICATED FIRM

DET NORSKE VERITAS INDUSTRY BV, THE NETHERLANDS

Hydraulics Division Hydraulics Division Hydraulics Products

Quality System Certified
15151 Hwy. 5 Glenrothes, Fife Am Schimmersfeld 7 Products in this catalog are manufactured
Eden Prairie, MN 55344 Scotland, KY7 4NW 40880 Ratingen, Germany in an ISO-9001-certified site.
Telephone 612/937-9800 Telephone 01-592-771-771 Telephone 02102-406-830
Fax 612/937-7130 Fax 01-592-773-184 Fax 02102-406-800

Copyright Eaton Corporation, 1995

Form No. 6-634 All Rights Reserved
Printed in USA