HMC 698
HMC 698
HMC 698
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
-130 -130
-140 -140
-150 -150
-160 -160
6
-170 -170
-180 -180
2 3 4 5 2 3 4 5
10 10 10 10 10 10 10 10
OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz)
-5 dBm -5 dBm
0 dBm 0 dBm
-120 +5 dBm
-120 +5 dBm
-130 -130
-140 -140
-150 -150
-160 -160
-170 -170
-180 -180
2 3 4 5 2 3 4 5
10 10 10 10 10 10 10 10
OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz)
-5 dBm
-120 0 dBm -120 -10 dBm
+5 dBm
-5 dBm
0 dBm
-130 -130 +5 dBm
-140 -140
-150 -150
-160 -160
-170 -170
-180 -180
2 3 4 5
10 10 10 10 10
2
10
3
10
4
10
5
[1] Phase Noise Floor vs Offset Frequency with varying Ref Power Level
[2] Fin= 7000 MHz @ 0 dBm, Ref Frequency = 100 MHz, N = 70
[3] Phase Noise Floor remains constant beyond 100 kHz offset frequency
-110 -110
SSB PHASE NOISE (dBc/Hz)
-140 -140
-150 -150
-160 -160
6
-170 -170
-180 -180
2 3 4 5 2 3 4 5
10 10 10 10 10 10 10 10
OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz)
PLL - INTEGER-n synthesizer - SMT
-110
SSB PHASE NOISE (dBc/Hz)
-130
-140
-150
-160
-170
-180
2 3 4 5
10 10 10 10
OFFSET FREQUENCY (Hz)
Outline Drawing
6
PLL - INTEGER-n synthesizer - SMT
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN.
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
[1] H698
HMC698LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1
XXXX
[2] H698
HMC698LP5(E) RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Description
Pin Number Function Description Interface Schematic
Pulsed output.
Vcc1, Vcc3,
4, 5, 18, 25 Supply Voltage 5V ±0.25V
Vcc2, Vcc_pd
Frequency Input
CMOS compatible
bit 0 (LSB) -1
28 REF
Reference Input
6 27 NREF
PLL - INTEGER-n synthesizer - SMT
30 ND Down Output
31 NU Up Output
3, 6 - 8, 17,
No Connection. These pins may be connected to RF/DC ground.
19 - 21, 24, N/C
Performance will not be affected.
26, 29, 32
6
18 4 3 2 2 1 1 0 0 0 0 0 1
19 4 3 3 3 1 1 0 0 0 0 1 1
20 5 4 0 0 0 0 1 0 0 0 0 0
21 5 4 1 1 0 0 1 0 0 0 1 0
6
PLL - INTEGER-n synthesizer - SMT
Evaluation PCB
6
PLL - INTEGER-n synthesizer - SMT
-110
-130
MEASURED
CALCULATED
-140
-150
-160
-170
-180
6
2 3 4 5 6 7
10 10 10 10 10 10
OFFSET FREQUENCY (Hz)
0.4
V V
IL MAX IH MIN
0.3
Input Current (mA)
0.2
0.1
-0.1
0 1 2 3 4 5
Input Voltage (V)