QMC 10 08

Filtration | Separation | Purification
QMC™ Series Filter Cartridges

High Efficiency Polypropylene Filter Cartridge
An innovative product manufactured with multiple layers
of melt blown polypropylene media. This unique structure
allows high flow rates while maintaining low differential
pressure and ideal depth filtration characteristics.
Features– Benefits
• Micron ratings from 0.1 to 10 µm – Broad application
range
• High Filtration Efficiency – 95%
• Graded pore structure – Multilayer, media for high dirt
holding capacity
• Fixed pore construction – Resists dirt unloading at
maximum differential pressure
• Polypropylene construction – Inert to many process
fluids
• Various Gasket/O-ring materials – Compatible with
many fluids
Product Specifications Certifications

Construction material: Polypropylene USP Class VI - Meets USP Class VI Biological Test for
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Plastics.
Encapsulated Viton (O-Rings only) FDA Listed Materials - All Materials comply with FDA
Title 21 of the Code of Federal Regulations Sections
Micron ratings: 0.1, 0.2, 0.4, 0.6, 1.0, 3.0, 5.0, 10.0 µm
174.5, and 177.1520, as applicable for food and
beverage contact.
Dimensions
Endotoxin level - Limulus Amebocyte Lysate CB028
Nominal lengths: 5", 9.75", 10", 20", 30", 40"
test indicated bacterial endotoxins were not present in
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
distilled water at 0.25 EU / ml.
Outside diameter: 2.7" (6.9 cm) Extractable content - Test indicate that Non-Volatile
Inside diameter: 1.0" (2.54 cm) Residue, Residue on Ignition and Heavy Metals meet
USP limits.
Operating Parameters
Maximum operating
temperature: 176 °F (80°C)
Maximum 80 psid @ 70°F (5.5 bar @ 21°C) Typical Applications
differential pressure: 40 psid @ 176°F (2.8 bar @ 80°C) • Food & beverage
Maximum reverse • Aqueous solutions
differential pressure: 40 psid @ 70°F (2.8 bar @ 21°C) • Chemicals
Recommended
• Pharmaceuticals
change-out pressure: 35 psid (2.4 bar) • Cosmetics
• Ultrapure water
Performance Specifications • RO Prefilters
Sanitization • Ink
• DE trap
Hot water at 176°F (80°C) at 5 psid (0.35 bar) for 30 min.
• Photoresists
In-line steam at 257°F (125°C) at 1psid (0.07 bar) for 30 min.
Autoclavable at 257°F (125°C) for 30 min.
QMC Nomenclature Information
QMC 0.6 -10 P2 T
Filter Type Nominal Length End Configuration Gasket or O-Ring
QMC Series Filters (inches) P Double Open End S Silicone
-5 P2 226/Flat Single Open End B Buna-N
Retention Rating (microns) -9.75 P3 222/Flat Single Open End E EPDM
-10 P7 226/Fin Single Open End V Viton
0.1 1 T Teflon endcap.
-20 P8 222/Fin Single Open End
0.2 3 Viton (O-Rings only)
-30 PX Extended Core
0.45 5
-40 AM Single open end, internal O-Ring
0.6 10
NPC Double open end, internal O-Ring
Example: QMC 0.6-10P2T

Removal Efficiency
Beta Ratio Beta 100 Beta 20
QMC FLOW RATE Efficiency 99% 95%
Typical Flow Rate Clean Water at Ambient Temperature 0.1 micron 0.8 0.1
(per 10''cartridge) 0.2 micron 1.0 0.2
BAR PSI
0.14 2.1 0.4 micron 2.0 0.4
Differential Pressure
0.12 1.8
0.1 µm 0.6 micron 3.0 0.6
0.10 1.5
1 micron 6.0 1.0
0.08 1.2 0.2 µm
0.4 µm 3 micron 14 3.0
0.06 0.9 0.6 µm
1 µm 5 microns 17 5.0
0.04 0.6
3, 5 µm 10 microns 25 10.0
0.02 0.3 10 µm
0 0
0 2 4 6 8 USGPM
Upstream particle counts
0 7.6 15.1 22.7 30.3 LPM Beta Ratio =
Downstream particle counts
For liquids other than water, multiply pressure drop by the fluid
viscosity in centipoise The micron ratings shown at various efficiency and beta ratio value levels
were determined through laboratory testing, and can be used as a guide
for selecting cartridges and estimating their performance. Under actual
field conditions, results may vary somewhat from the values shown due to
the variability of filtration parameters.
Testing was conducted using the single-pass test method, water at
3 gpm/10'' cartridge. Contaminant's included latex beads, coarse and
fine test dust. Removal efficiencies were determined using dual laser
source particle counters.
For more information DISTRIBUTED BY:

Graver Technologies Customer Service: 1-888-353-0303
Technical Support: 1-888-353-0303
E-mail us at info@gravertech.com
Graver Technologies Europe (UK): +44-1424-777791
All information and recommendations appearing in this bulletin concerning the use
of products described herein are based on tests believed to be reliable. However, it is the
user’s responsibility to determine the suitability for his own use of such products. Since the
actual use by others is beyond our control, no guarantee, expressed or implied, is made
by Graver Technologies as to the effects of such use or the results to be obtained. Graver
Technologies assumes no liability arising out of the use by others of such products. Nor is
the information herein to be construed as absolutely complete, since additional informa-
tion may be necessary or desirable when particular or exceptional conditions or circum-
stances exist or because of applicable laws or government regulations.
QMC is a trademark of Graver Technologies, LLC.
200 Lake Drive 302- 731-1700

Glasgow, 800 - 249-1990 e-mail: info@gravertech.com
DE 19702 U.S.A. Fax: 302- 369-0938 web site: www.gravertech.com
GTX- 260 4–13

QMC 10 08

Uploaded by

Copyright:

Available Formats

QMC 10 08

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

QMC 10 08

Uploaded by

Copyright:

Available Formats

Filtration | Separation | Purification

QMC™ Series Filter Cartridges

Product Specifications Certifications

Example: QMC 0.6-10P2T

For more information DISTRIBUTED BY:

200 Lake Drive 302- 731-1700

GTX- 260 4–13

You might also like