Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    UF IntegraTec P Series PES IO MB PRO 95 PDS 45 D04342 en

    Uploaded by

    pawanlulla73
    UF

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    UF IntegraTec P Series PES IO MB PRO 95 PDS 45 D04342 en

    Uploaded by

    pawanlulla73
    5 views2 pages
    UF

    Original Title

    UF-IntegraTec-P-Series-PES-IO-MB-PRO-95-PDS-45-D04342-en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    UF

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views2 pages

    UF IntegraTec P Series PES IO MB PRO 95 PDS 45 D04342 en

    Uploaded by

    pawanlulla73
    UF

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Product Data Sheet

    P series | Pressurized PES UF Module

    DuPont™ IntegraTec™ MB PRO 95


    Modules for Open Platform

    Key Features Key Applications


    l Innovative Multibore™ PRO PES Fibers: l Municipal drinking water.
    – Exceptional physical strength and chemical resistance. l Desalination RO pretreatment.
    – High colloidal particulate, bacteria and virus log removal rate. l Ideal for large systems.
    – Excellent filtration permeability.
    – Optional coagulation can enhance the removal of algae and organics.
    l Optimized Module Design:
    – Open platform design to fit customer built skids.
    – Enhanced active filtration area to minimize footprint.
    – Robust materials for long lifetime.
    – Easy installation and low maintenance.
    – All wetted parts corrosion free.

    Module Specification
    General
    Part Number IN-0122
    Mode of Filtration In-Out Pressurized
    Membrane Type Multibore™ PRO
    Membrane Material PESm
    Nominal Membrane Pore Size 0.02 μm
    Module Operating Process Dead-end
    Housing Material PVC-U, white
    End Cap Material PVC-U, grey
    End Cap Coupling Material SS (EPDM sealing)
    Dimensions
    Active Membrane Area 95 m² 1,023 ft²
    Module Length (L) 1,720 ± 1.5 mm 67.7 inch
    Distance Top / Bottom Feed Port (L1) 1,834 ± 3.0 mm 72.2 inch
    Length with End Caps (L2) 1,914 ± 3.0 mm 75.4 inch
    Module Diameter (A) 250 ± 1.5 mm 9.8 inch
    Distance Feed Top Port - Filtrate Port (B) 190 ± 1.5 7.5 inch
    Outer Diameter End Cap Coupling Maximum (C) 295 mm 11.6 inch
    Protruding Part of the Port (E) 40 ± 1 mm 1.6 inch
    Filtrate / Backwash Port (D) 50.8 mm 2 inch
    Weight and Volume
    Shipping Weight 58 kg 128 lbs.
    Weight Empty 58 kg 128 lbs.
    Weight Filled 110 kg 243 lbs. powered by
    Hold-Up Volume Feed (CIP) 22 L 5.7 gal
    Hold-Up Volume Membrane Structure (CIP) 18 L 4.8 gal
    Hold-Up Volume Filtrate (CIP) 21 L 5.4 gal

    Form No. 45-D04342-en, Rev. 0


    Suggested Operating Conditions
    General Details
    Operating Temperature Range 1 - 40 °C 34 - 104 °F
    Operating pH 3 - 11
    Cleaning pH 1 - 13
    Typical Filtration TMP 0.1 - 0.6 bar 1.5 - 8.7 psi
    Typical Backwash TMP 0.3 - 2.0 bar 4.4 - 29.0 psi
    Backwash Flux 230 L/(m²h) 135 gfd
    Backwash Flow 21.8 m3h 96.0 gpm
    Operating Limits (Maximum)
    Rate of Temperature Change 5 °C/min 9 °F/min
    Inlet Pressure (20 - 40 °C) 5 bar 73 psi
    Rate of Pressure Change 0.5 bar/sec 7.3 psi/sec
    Filtration TMP 1.5 bar 22 psi
    Backwash TMP 3.0 bar 44 psi
    Filtration Flux 140 L/(m2h) 82 gfd
    Filtration Flow 13.3 m3h 58.6 gpm
    Backwash Flux 250 L/(m²h) 147 gfd
    Particle Size 230 μm
    Exposure NaOCl ≤ 250,000 ppm x h (at pH ≥ 9.5)
    Concentration NaOCl 500 ppm

    General Information Regulatory Note


    l Avoid any abrupt pressure variations during start-up, operation, l Certified drinking water modules require specific conditioning
    shutdown, cleaning, or other sequences to prevent possible procedures prior to producing potable water. For operating
    membrane damage. The maximum pressure change allowable parameters, please refer to the DuPont™ IntegraTec™
    is 0.5 bar/s. Pressurized UF In-Out P Series Process and Design Guidelines
    l For assembly please refer to the latest version of the DuPont™ (Form No. 45-D02234-en).
    IntegraTec™ Pressurized UF In-Out P Series Modules for Open l Drinking water modules may be subjected to additional
    Platforms Assembly Instructions (Form No. 45-D02231-en). regulatory restrictions in some countries. Please check local
    l If operating limits and guidelines given in this bulletin are not regulatory guidelines and application status before use.
    strictly followed, any warranty will be null and void. l Flushing needs to be done according to the DuPont™
    l To control biological growth during extended system IntegraTec™ Pressurized UF In-Out Module Rinsing Procedure
    shutdowns, a storage solution must be introduced into the (Form No. 45-D02947-en).
    membrane modules. Detailed information is given in the
    DuPont™ IntegraTec™ Pressurized UF In-Out Module
    Preservation Instruction Manual (Form No. 45-D02946-en).

    All information set forth herein is for informational purposes only. This information is general information and may differ from that based on actual conditions. Customer
    is responsible for determining whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's workplace
    and disposal practices are in compliance with applicable laws and other government enactments. The product shown in this literature may not be available for sale
    and/or available in all geographies where DuPont is represented. The claims made may not have been approved for use in all countries. Please note that physical
    properties may vary depending on certain conditions and while operating conditions stated in this document are intended to lengthen product lifespan and/or improve
    product performance, it will ultimately depend on actual circumstances and is in no event a guarantee of achieving any specific results. DuPont assumes no obligation
    or liability for the information in this document. References to “DuPont” or the “Company” mean the DuPont legal entity selling the products to Customer unless
    otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
    ARE EXPRESSLY EXCLUDED. No freedom from infringement of any patent or trademark owned by DuPont or others is to be inferred.

    Have a question? Contact us at: © 2023 DuPont. DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® Form No. 45-D04342-en, Rev. 0
    www.dupont.com/water/contact-us are owned by affiliates of DuPont de Nemours Inc., unless otherwise noted. January 2023

    You might also like