Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 50 views

    LG SW 440 SR

    Uploaded by

    kylealamango
    This document provides specifications for an LG Chem seawater reverse osmosis membrane element. The element uses a thin-film nanocomposite membrane to improve energy efficiency and productivity for desalination. Key specifications include a permeate flow rate of 25 cubic meters per day, 99.7% minimum NaCl rejection, and 41 square meters of active membrane area.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LG SW 440 SR

    Uploaded by

    kylealamango
    50 views1 page
    This document provides specifications for an LG Chem seawater reverse osmosis membrane element. The element uses a thin-film nanocomposite membrane to improve energy efficiency and productivity for desalination. Key specifications include a permeate flow rate of 25 cubic meters per day, 99.7% minimum NaCl rejection, and 41 square meters of active membrane area.

    Original Title

    LG-SW-440-SR

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an LG Chem seawater reverse osmosis membrane element. The element uses a thin-film nanocomposite membrane to improve energy efficiency and productivity for desalination. Key specifications include a permeate flow rate of 25 cubic meters per day, 99.7% minimum NaCl rejection, and 41 square meters of active membrane area.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    50 views1 page

    LG SW 440 SR

    Uploaded by

    kylealamango
    This document provides specifications for an LG Chem seawater reverse osmosis membrane element. The element uses a thin-film nanocomposite membrane to improve energy efficiency and productivity for desalination. Key specifications include a permeate flow rate of 25 cubic meters per day, 99.7% minimum NaCl rejection, and 41 square meters of active membrane area.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    High Rejection

    Seawater Reverse Osmosis (RO) Element


    LG SW 440 SR

    Overview
    LG Chem’s thin-film nanocomposite (TFN) membranes lower the cost of desalina-
    tion by improving energy efficiency and productivity. These membranes feature
    benign nanomaterials incorporated into the thin-film polyamide layer of a compos-
    ite membrane. This innovative patent-pending technology significantly increases
    membrane permeability.
    • Industry-standard flux with highest salt rejection
    • Standard 8-inch spiral wound element design
    • Easy to retrofit existing RO plants
    • NSF Standard 61 Certified

    Product Specifications
    Configuration: 8-inch spiral wound
    Membrane Polymer: Thin-film nanocomposite (TFN) polyamide

    Product Number Permeate flow Minimum Stabilized Active Membrane Feed Spacer Stabilized Boron
    rate NaCl Rejection NaCl Rejection Area mil Rejection
    m3/d (gpd) % % m2 (ft2) %
    LG SW 440 SR 25 (6,600) 99.7 99.85 41 (440) 28 93
    Note: The above values are normalized to the following conditions: 32,000 ppm NaCl, 5 ppm boron, 5.5 MPa (800 psi), 25°C (77°F), pH 8, 8% recovery. Per-
    meate flows for individual elements may vary +/- 15%.

    A Part Number Length Element Perm Tube Weight


    A O.D. I.D. kg (lbs.)
    B C
    B C LG SW 440 SR 1,016 mm 200 mm 28.6 mm 16.4
    (40 in.) (7.9 in.) (1.125 in.) (36)

    Operating Specifications For more information and operating guidelines, visit www.LGwatersolutions.com
    Max. Applied Pressure: 8.27 MPa (1200 psig)
    Max. Chlorine Concentration: < 0.1 ppm
    Max. Operating Temperature: 45°C (113°F)
    pH Range, Continuous (Cleaning): 2-11 (2-13)
    Max. Feedwater Turbidity: 1.0 NTU
    Max. Feedwater SDI (15 mins): 5.0
    Max. Feed Flow: 18.0 m3/h (80 GPM)
    Min. Ratio of Concentrate to Permeate Flow for any Element: 5:1
    Max. Pressure Drop (ΔP) for Each Element: 1 bar (15 psi)

    The information and data contained herein are deemed to be accurate and reliable and are offered in good faith, but without guarantee of performance. LG NanoH2O assumes no liability for
    results obtained or damages incurred through the application of the information contained herein. Customer is responsible for determining whether the products and information presented
    herein are appropriate for the customer’s use and for ensuring that customer’s workplace and disposal practices are in compliance with applicable laws and other governmental enactments.
    Specifications subject to change without notice. LG NanoH2O is a wholly owned company of LG Chem, Ltd. All rights reserved. © 2015 LG NanoH2O, Inc.

    Lenntech Rev. G (08.15)

    info@lenntech.com Tel. +31-152-610-900


    www.lenntech.com Fax. +31-152-616-289

    You might also like