CAIE IGCSE PHYSICS

Speed is defined as the distance travelled per unit time.

Use the equation
1. Motions, Forces and Energy d
v= t Where:
v is speed
1.1. Physical quantities and d is distance
measurement techniques t is time
Velocity is defined as the speed in a given direction.
Making measurements (apparatus):
Distance & Speed Time Graphs
Liquids: Measuring Cylinder.
A pipette (accurate for one specific measurement)
Time: Clock, Digital Timers (reading to 0.1s or better)
Length: Metre rule (graduated in mm)
Micrometer Screw Gauge
Vernier Calliper
Volume: Measuring Length, Width, Height
Distance-Time Graphs
Measuring volume by displacement
Mass: Top pan balance, precision of 0.1g 1 Acceleration
2 At rest
Vectors and Scalars: 3 Deceleration
4 Constant Speed
Scalar: has magnitude only
e.g. distance, speed, time, mass, energy and temperature
Vector: has magnitude and direction
e.g. force, weight, velocity, acceleration, momentum, electric
field strength and gravitational field strength
Speed-Time Graphs
1 Increasing Acceleration
2 Constant Speed
3 Decreasing Acceleration
4 Uniform Acceleration
5 Uniform Deceleration
6 Decreasing Deceleration
7 Increasing Deceleration

Acceleration:

Acceleration is defined as the change in velocity per unit of

time.

a = v−u
Δt
= Δv
Δt
Where:
a is acceleration
v is final velocity
u is initial velocity
Δt is change in time

Falling objects:

Acceleration of free fall g for an object near to the surface

of the Earth is constant and is approximately 9.8 m/s².
At the beginning of the paper, the instructions will tell you
to use 10 m/s² or 9.8 m/s². This detail can be very
important.

Terminal Velocity:
1.2. Motion
CAIE IGCSE PHYSICS

An object which is falling because of acceleration due to The centre of mass is the place at which all of the object's
gravity through the atmosphere is subjected to two external mass is concentrated. Because gravity works only on one
forces. One force is the gravitational force, expressed as the spot in the item. For regularly formed objects, the centre of
weight of the object. The other force is the air resistance or mass is in the centre.
drag of the object. It is critical to understand where a body's centre of mass is
An object has terminal velocity when those two forces are located, as this dictates the body's stability. When a body is
equal. tilted slightly, the line of action of its weight passes through its
base, it is stable.
1.3. Mass and Weight
Resultant forces:
Mass: a measure of the quantity of matter in an object at rest
Determine the resultant of two or more forces acting along
relative to the observer. The mass of a body is a measure of
the same straight line.
the amount of matter in it.
An object either remains at rest (stationary) or continues in a
Weight: a gravitational force on an object that has mass.
straight line at constant speed unless acted on by a resultant
Gravitational field strength g is defined as force per unit
force.
mass.
A resultant force may change the velocity of an object by
The equation for gravitational field strength is :
changing its direction of motion or its speed.
g=W
m
Gravitational field strength is equivalent to the acceleration of Springs:
free fall.
Weights (and masses) may be compared using a balance. Sketch, plot and interpret load-extension graphs for an elastic
The weight of an object is the effect of a gravitational field on solid (eg. metal wire) and be able to describe any
its mass. experimental procedures.
The limit of proportionality is a point on a load-extension
graph beyond which the graph is no longer a straight line.
1.4. Density Spring constant is defined as force per unit extension. \n
Recall and use the equation:
Density is defined as mass per unit volume.
The equation for density is: k = Fx Where:
p = mv F is the force or load
With this equation, you can determine the density of a liquid, x is the extension
of a regularly shaped solid and of an irregularly shaped solid k is the spring constant ( N/m, N/cm, N/mm)
which sinks in a liquid. You need to record its mass, then
volume and then substitute it through the equation. Hooke’s Law
Know whether an object floats based on density data. A
higher density means that the object will sink. A lower density F = kx
makes it float. This is called buoyancy. Recall and use the equation F = ma and know that the force
and acceleration are in the same direction.
How to determine whether one liquid will float on F = ma
another liquid based on density data given that the When F is the force in N
liquids do not mix: m is mass in kg
a is acceleration in m/s²
The liquid with a larger density will descend below the other
liquid. Centripetal Force
A liquid floats over the other liquid if it has a lower density.
Describe the motion in a circular path due to a force
1.5. Forces perpendicular to the motion.
In a circular motion, if speed increases, the force needed
A force is a push or a pull. increases (mass and radius are constants).
Forces may produce changes in the size, shape and In a circular motion, if radius decreases, the force needed
velocity of an object. increases (mass and speed are constants). In a circular
Solid friction is the force between two surfaces that may motion, if mass is increased, an increased force is
impede motion and produce heating. required to keep speed and radius constant.
Friction (drag) acts on an object moving through a liquid
or a gas (air resistance). Moments of forces

Centre of mass: Moment of a force as a measure of its turning effect.

CAIE IGCSE PHYSICS

The moment of a force is defined as moment = force x

perpendicular distance from the pivot.
Apply the principle of moments to situations with one
force on each side of the pivot, including balancing of a
beam. When there is no resultant force and no resultant
moment, an object is in equilibrium.
Apply the principle of moments in situations with more
than one force on each side of the pivot.
Describe an experiment to demonstrate that there is no
resultant moment on an object in equilibrium.
The stability of an object depends on the position of its
centre of gravity.

1.6. Energy Work and Power Energy transfer diagrams :

Energy 'stores’ are: kinetic, gravitational potential, chemical,
elastic (strain), nuclear electrostatic and internal (thermal).
Energy is transferred between stores during events and
processes.
Energy is transferred by forces (mechanical work done),
electrical currents (electrical work done), heating, and by
electromagnetic, sound and other waves.

The principle of the conservation of energy.

The principle of energy conservation states that energy is

Sankey Diagrams:
neither created nor destroyed. It may transform from one
type to another.
Energy can only be used by converting it from one form to
another. Unless energy is added from the outside, a system
always possesses the same quantity of energy.
The chemical energy of the batteries is transformed into
electrical energy in a torch, which is then converted into light
and heat. This energy is either absorbed or reflected by the
environment.

Kinetic energy formula: Mechanical or electrical work done is equal to the energy
transferred.
The equation for (mechanical) work done is:
W = F d = ΔE
Units : Joules (J)
Where:
W = Work Done
F = magnitude of the force
d = the distance in the direction of the force

Energy Resources

Useful energy may be obtained, or electrical power

generated, from:
Change in gravitational potential energy formula: Non-Renewable Energy
Renewable Energy Sources
Sources
Fossil Fuels Wind
Oils Tidal
Coal Hydro-electric
Natural Gas Geothermal
CAIE IGCSE PHYSICS

Non-Renewable Energy Power is defined as work done per unit time and also as
Renewable Energy Sources
Sources energy transferred per unit time.
Solar (EM Waves from the W
Nuclear P=
sun) t
- Biofuels ΔE
P=
t
Some sources of energy derive their energy from the sun. P = power (watt)
These are: W = work done (J)
ΔE = energy transferred (J)
Coal - formed from dead trees that have used energy T = time (s)
from the sun to produce hydrocarbons that have become
coal under pressure 1.7. Momentum
Biofuels - organic matter that is burned in order to
produce energy Momentum is defined as mass x velocity (kg m/s)
Hydro-electric - energy relies on the sun’s energy to run
the water cycle so energy can be harnessed The equation for momentum is p = mv Where:
Wind - gets heated and rises up and cooler air flows to fill p is momentum
the space m is mass
Solar - Electromagnetic waves from the sun are captured v is velocity
by photocells and turned into energy Resultant force is defined as the change in momentum per
unit time:
Environmental Δp
Renewability Availability Reliability Scale
Impact
F= Δt
Wind ✓ high low high on birds ∴ F = mΔv
Δt
Solar ✓ high low high low impact Impulse of a force is defined as force x time for which force
Almost no acts:
Geothermal ✓ low high low Impulse = F Δt = Δ(mv)
impact
Biofuels ✓ high high high low impact
The principle of the conservation of momentum:
Hydro- impacts
✓ high high high
electric marine life
General law of physics according to which the quantity called
Tidal ✓ high low low - momentum that characterises motion never changes in an
Greenhouse isolated collection of objects; that is, the total momentum of a
Coal ☓ high high low
gases closed system remains constant.
Radioactive
Nuclear ☓ low high high
substances 1.8. Pressure
Boilers, turbines and generators are used to generate Pressure is defined as force per unit area, and measured in
electricity in a power plant. N/m or Pa. 1 Pa = 1 N/m
The equation for pressure is: p = Fa ​ Where:
p is pressure
F is force
a is area
Pressure beneath the surface of a liquid changes with depth
and density of the liquid. The change in pressure beneath the
surface of a liquid is given by the equation:
change in pressure = density x gravitational field strength x
change in depth

Efficiency: Δp = ρgΔh Where:

Δp= pressure di erence in pascals (Pa)
Useful energy output ρ = density in kilograms per cubic metre (kg/m3)
Efficiency = × 100
Total energy input g = gravitational eld strength (N/kg)
Δh = change in height/height of vertical column (m)
Power: