Operation and Characteristics Diode: Ac Rectifier

In Chapter 1, you learned that many semiconductor devices are
based on the pn junction.

In this chapter, the operation and characteristics of the diode are
covered.
The importance of the diode in electronic circuits is due to its ability
to conduct current in one direction while blocking current in the
other direction is essential to the operation of many types of
circuits.
One circuit in particular is the ac rectifier, which is covered in this
chapter. Other important applications are circuits such as diode
limiters, diode clampers, and diode voltage multipliers.
The DIODE
A diode is a two-terminal semiconductor device formed
by two doped regions of silicon separated by a pn
junction or depletion region.
How to use a voltage to cause the diode to conduct

current in one direction and block it in the other
direction.
This process is called biasing.
To bias a diode, you apply a dc voltage across it.
Forward Bias
Forward bias is the condition that allows current through the pn
junction.
VBIAS, must be greater than the barrier

potential.
A diode connected
for forward bias.
A forward-biased diode showing the flow of majority carriers and

the voltage due to the barrier potential across the depletion
region.
The bias-voltage source imparts sufficient energy to the free

electrons for them to overcome the barrier potential of the depletion
region and move on through into the p region.
Once in the p region, these conduction electrons have lost enough
energy to immediately combine with holes in the valence band.
Electrons are in the valence band in the p region, simply because

they have lost too much energy overcoming the barrier potential to
remain in the conduction band.
The conduction band in a conductor overlaps the valence band so that

it takes much less energy for an electron to be a free electron in a
conductor than in a semiconductor and that metallic conductors.
The Effect of Forward Bias on the Depletion Region

As more electrons flow into the depletion region, the number of
positive ions is reduced.
As more holes effectively flow into the depletion region on the other
side of the pn junction, the number of negative ions is reduced.
This reduction in positive and negative ions during forward bias
causes the depletion region to narrow
The Effect of the Barrier Potential During

Forward Bias
barrier potential = energy hill
When forward bias is applied, the free electrons are provided with
enough energy
from the bias-voltage source to overcome the barrier potential and
effectively climb the energy hill and cross the depletion region.
Reverse Bias
Reverse bias is the condition that essentially prevents current through
the diode
A diode connected for reverse
The diode after reverse-bias voltage is

applied
The electric field between the positive and negative ions increases in
strength until the potential across the depletion region equals the bias
voltage, VBIAS.
Reverse Current
The extremely small current that exists in reverse bias after the transition current dies out
is caused by the minority carriers in the n and p regions that are produced by thermally
generated electron-hole pairs.
Reverse Breakdown
external reverse-bias voltage is increased to a value called the breakdown voltage, the reverse
current will drastically increase.
VOLTAGE-CURRENT CHARACTERISTIC OF A DIODE

The relationship between the voltage and the current in a diode on a graphical basis.
V-I Characteristic for Forward Bias

When a forward-bias voltage is applied across a diode, there is current. This current is called
the forward current and is designated IF.
V-I characteristic
Dynamic Resistance
The resistance of the forward-biased diode is not constant .
The resistance changes as you move along the V-I curve, it is called dynamic or ac
resistance.
V-I Characteristic for Reverse Bias

When a reverse-bias voltage is applied across a diode, there is only an extremely small
reverse
current (IR) through the pn junction.
Temperature Effects
forward-biased diode, as temperature is increased,
the forward current increases for a given value of
forward voltage.
Given value of forward
current, the forward voltage
decreases.
DIODE MODELS
diode can be modeled for circuit analysis
Bias Connections
Diode Approximations
The Ideal Diode Model

diode = a simple switch
forward-biased = closed (on) switch
reverse-biased = open (off) switch
For troubleshooting = to determine if the diode is working properly.
The Practical Diode Model

closed switch in series with a small equivalent voltage source (VF) equal to the barrier
potential (0.7 V)
troubleshooting in lower-voltage circuits
designing basic diode circuits
The Complete Diode Model

Operation and Characteristics Diode: Ac Rectifier

Uploaded by

Copyright:

Available Formats

Operation and Characteristics Diode: Ac Rectifier

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Operation and Characteristics Diode: Ac Rectifier

Uploaded by

Copyright:

Available Formats

In Chapter 1, you learned that many semiconductor devices are

based on the pn junction.

How to use a voltage to cause the diode to conduct

VBIAS, must be greater than the barrier

A forward-biased diode showing the flow of majority carriers and

The bias-voltage source imparts sufficient energy to the free

Electrons are in the valence band in the p region, simply because

The conduction band in a conductor overlaps the valence band so that

The Effect of Forward Bias on the Depletion Region

The Effect of the Barrier Potential During

A diode connected for reverse

The diode after reverse-bias voltage is

VOLTAGE-CURRENT CHARACTERISTIC OF A DIODE

V-I Characteristic for Forward Bias

V-I Characteristic for Reverse Bias

The Ideal Diode Model

For troubleshooting = to determine if the diode is working properly.

The Practical Diode Model

The Complete Diode Model

You might also like