Unable to access the net app cluster mode 9.2 san through gui after power maintenance

•Download as DOCX, PDF•

0 likes•100 views

Unable to access the NetApp storage system 9.2 cluster mode due to cluster management LIF down and http service was disable. Here we have mentioned the real time issue which we have faced and solution has been given step by stem by using the command mode. Hope it can be useful for NetApp Administrators

Issue-:Unable toaccess the NetApp Cluster mode 9.2 SAN throughGUI after
power maintenance.
Check all the network ports if there is any issuelike any portis down by executing
the below command.
Cluster-MAIN::>network interfaceshow
If any network interface is in down state, make then online by executing the
below command.
Example-:
Cluster-MAIN: :>network interface show cluster_mgmt
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
Cluster-MAIN
cluster_mgmtup/up 10.190.218.70/24 Cluster-MAIN-02
e0M false
Cluster-MAIN::>network interfacemodify -vserver Cluster-MAIN-lif cluster_mgmt-
home-node Cluster-MAIN-02 -home-porte0M -address 10.190.218.70 -netmask
255.255.255.0 -status-admin up

$Cluster-MAIN: :>network interface show cluster_mgmt Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- Cluster-MAIN cluster_mgmtup/up 10.190.218.70/24 Cluster-MAIN-02 e0M true Unable to accessdue to http webservice isnotenabledasbelow-: Cluster-MAIN::>systemserviceswebshow External WebServices:true Status:online HTTP Protocol Port:80 HTTPS Protocol Port: 443 HTTP Enabled:false To make http Enabledtrue we needtologinintothe advancedmode andexecute the belowcommand. Cluster-MAIN::>set-privilegeadvanced Warning:These advancedcommandsare potentiallydangerous;use themonlywhendirectedtodoso by NetApppersonnel. Do youwant to continue?{y|n}:Y Cluster-MAIN::*>$

Thenexecute the below command-:
Cluster-MAIN::*>systemservice webmodify -external true -per-address-limit80-http-enabledtrue
To confirmthe http isenabled execute the below command-:
Cluster-MAIN::>systemserviceswebshow
External WebServices:true
Status:online
HTTP Protocol Port:80
HTTPS Protocol Port:443
HTTP Enabled:true
Come out fromthe advancedprivilegebyexecutingthe below command-:
RARENETAPPCLUS-MAIN::*>set-privilege admin
RARENETAPPCLUS-MAIN::>
Nowenjoythe accessof NetAppStorage throughGUI
Note-:The above describestwoissuesone isclustermanagementLIFwasdownandotherone http
service wasdisabledandfixedthe issue.
Please docontactfor any suggestions -sarojmsc@gmail.com

What's hot

How to assign unowned disk in the netapp cluster 8.3

Saroj Sahu

3PAR: HOW TO CHANGE THE IP ADDRESS OF HP 3PAR SAN

Saroj Sahu

Use of administrative privilege levels in netapp cluster 8.x

Saroj Sahu

Different type of shells In Netapp Cluster mode 8.X and how to access them t...

Saroj Sahu

Basic command for Time sync (Domain Controllers)

Naseem Khoodoruth

This document provides instructions for configuring the Windows time service to synchronize with an external Network Time Protocol (NTP) server from the africa.pool.ntp.org pool and monitor the time service status. It includes commands to configure the NTP server, sync the time, check the configuration and source, and monitor the time service to ensure it is getting time from the external NTP server rather than the local computer clock.

Free radius billing server with practical vpn exmaple

Chanaka Lasantha

This document provides instructions for setting up a total site-to-site Linux-based OpenVPN solution with dynamic DNS (DDNS) in 3 pages. It includes steps to install and configure a DDNS client, FreeRADIUS server, MySQL database, OpenVPN server, firewall rules, and a web interface for managing the FreeRADIUS server. The full document contains technical details for installing packages, editing configuration files, testing the setup, and securing the system.

TFTP Installation Configuration Guide

VCP Muthukrishna

This document provides instructions for installing and configuring a TFTP server on Linux. It describes pre-requisites like package dependencies. It also details enabling the TFTP service, checking the service status, and troubleshooting issues like SELinux denials. Specific steps covered include verifying SELinux settings, modifying boolean values to allow TFTP access, and using tftp clients to connect to the server interactively and non-interactively.

How To Configure VNC Server on CentOS 7

VCP Muthukrishna

This document provides steps to install and configure a VNC server on CentOS 7 to allow remote desktop connections. It describes installing the vnc-server package, configuring the service, enabling the firewall, setting passwords, and connecting with a VNC client. The key steps are: 1) Installing vnc-server, 2) Configuring a service file for each user, 3) Enabling and starting the service, 4) Opening the firewall port, 5) Setting the VNC password, and 6) Connecting with a VNC viewer using the configured password.

Firewalld LAB

Kaan Aslandağ

This document discusses configuring custom firewall zones and services using FirewallD on CentOS 8. It shows how to create a new "privatekaan" zone, add the DNS service to it, and assign network interfaces to that zone. It also demonstrates saving the runtime configuration permanently, reloading the firewall, and testing connectivity using tcpdump. The document provides examples for viewing active zones and services, setting a default zone, and allowing or blocking the SSH service as needed.

TCU upgrade and configure

Ämjed Othman

This document provides instructions for upgrading the software on a TCU (traffic control unit) via IP. It outlines the necessary steps, including: 1. Configuring the laptop IP address to 192.168.1.2. 2. Downloading and using freeFTPd and Tera-term software to transfer the TCU software and script files to the TCU. 3. Connecting to the TCU through the LMT port and creating a "TCU" folder to store the files. 4. Running the software upgrade procedure and commands in Tera-term to complete the TCU software upgrade.

Configuration of NTP Server on CentOS 8

Kaan Aslandağ

This document provides instructions for configuring a CentOS 8 system as an NTP server or client using the Chrony NTP daemon. It describes installing the Chrony package, enabling it to start on boot, configuring it as a server to serve local networks by modifying /etc/chrony.conf, restarting Chrony, and opening firewall ports. It also provides instructions for configuring a system as a Chrony client by pointing it to the local NTP server.

Linux internet server security and configuration tutorial

annik147

Configuration IPTables On CentOS 8

Kaan Aslandağ

This document provides instructions for configuring iptables firewall rules on CentOS 8. It explains that iptables allows configuration of Linux kernel firewall tables, chains, and rules for IPv4 traffic, while ip6tables is used for IPv6. It describes installing the iptables-services package to automatically restore rules on reboot. Commands are provided to start and enable the service, list current rules, add rules to allow specific ports for services like SSH and HTTP(S), and save rules to a file to restore after a restart.

Composants et fonctionnement d'un Switch Cisco

DJENNA AMIR

Install telnet Linux

VCP Muthukrishna

Foreman and Puppet Master Install process - Customer Used Case

Kanwar Batra

How to install squid proxy on server or how to install squid proxy on centos o

Proxiesforrent

How to Install Configure and Use sysstat utils on RHEL 7

VCP Muthukrishna

The document discusses how to install, configure, and use the sysstat utilities to generate system activity reports on Linux systems. It provides steps to install the sysstat package, enable and start the sysstat service, and configure default settings and cron jobs. It also describes the various sysstat command line tools like sar, iostat, mpstat and their options to generate CPU, memory, disk, network and other reports.

Positive Hack Days. Pavlov. Network Infrastructure Security Assessment

Positive Hack Days

What's hot (19)

How to assign unowned disk in the netapp cluster 8.3

3PAR: HOW TO CHANGE THE IP ADDRESS OF HP 3PAR SAN

Use of administrative privilege levels in netapp cluster 8.x

Different type of shells In Netapp Cluster mode 8.X and how to access them t...

Basic command for Time sync (Domain Controllers)

Free radius billing server with practical vpn exmaple

TFTP Installation Configuration Guide

How To Configure VNC Server on CentOS 7

Firewalld LAB

TCU upgrade and configure

Configuration of NTP Server on CentOS 8

Linux internet server security and configuration tutorial

Configuration IPTables On CentOS 8

Composants et fonctionnement d'un Switch Cisco

Install telnet Linux

Foreman and Puppet Master Install process - Customer Used Case

How to install squid proxy on server or how to install squid proxy on centos o

How to Install Configure and Use sysstat utils on RHEL 7

Positive Hack Days. Pavlov. Network Infrastructure Security Assessment

Similar to Unable to access the net app cluster mode 9.2 san through gui after power maintenance

ISAM ALU 7360 5520_ihub_turn_up_procedure

Wahyu Nasution

This document provides instructions for configuring and turning up a new Alcatel-Lucent ISAM. It describes how to initially log in to the ISAM, configure the IP address and network port, set up the management VLAN and interface. It also covers configuring SNMP management between the ISAM and AMS. Standard procedures and alternative scenarios like configuring a Link Aggregation Group are presented.

Hướng dẫn cài đặt switch planet layer 3

3c telecom

SR-IOV, KVM and Emulex OneConnect 10Gbps cards on Debian/Stable

juet-y

Installation of pfSense on Soekris 6501

robertguerra

This document provides instructions for configuring a pfSense firewall to use multiple WAN connections for failover. It describes setting up a Clear Wireless 4G connection as the primary WAN and using the existing office connection as a backup. Specific steps include adding the WAN interfaces, creating a gateway group for failover, and configuring firewall rules to use the gateway group. Initial testing showed the Clear Wireless connection providing adequate speeds for typical office use while offloading over 6GB of data from the office connection in just 3 days.

Installation of pfSense on Soekris 6501

robertguerra

The document provides instructions for configuring a pfSense firewall to use a Clear Wireless 4G connection for primary internet access and failover to an existing office internet connection. It describes setting up the Clear Wireless WAN interface and a multi-WAN gateway group in pfSense. Traffic is configured to use the Clear Wireless gateway by default with failover to the office connection if the primary goes down. Initial tests of the Clear Wireless connection achieved speeds suitable for typical office use and zero packet loss. Configuring the Westell 6100 modem to bridge mode is also described to allow use of an external router.

1-300-206 (SENSS)=Firewall (642-618)

Mohmed Abou Elenein Attia

This document provides an overview of various network security solutions that can be implemented on Cisco edge networks. It begins with a description of common switching security features like port security, DHCP snooping, and dynamic ARP inspection. It then covers private VLANs, protected ports, and various access control lists that can filter traffic. The document also discusses remote management solutions, SSH authentication, SNMPv3, zone-based firewalls, AAA, and best practices. Finally, it provides brief summaries of features related to the ASA firewall, IPS/IDS virtualization, ISE, ACS, and packet capture functionality.

Ccnp3 lab 3_4_en

Omar Herrera

Four switches have been installed with redundant uplinks between access and distribution layers. Spanning tree removes redundant links, running a separate instance for each VLAN. To reduce CPU load, MST is configured to group VLANs into instances. MST is enabled on all switches and the MST region name "CISCO" and revision number 1 are applied. VLANs 20-50 are assigned to instance 1 and VLANs 80 and 100 to instance 2, with others remaining in the default instance 0.

Ccnp3 lab 3_4_en

Omar Herrera

Four switches have been installed with redundant uplinks between access and distribution layers. Spanning tree removes redundant links to prevent loops. The document describes configuring Multiple Spanning Tree (MST) on the switches to group VLANs into instances to reduce CPU load from multiple spanning tree calculations. MST is configured by assigning VLANs 20-50 to instance 1 and VLANs 80,100 to instance 2 while the rest remain in the default instance 0. Identical MST configurations must be applied to all switches for proper operation.

Important cisco-chow-commands

ssusere31b5c

(SDD419) Amazon EC2 Networking Deep Dive and Best Practices | AWS re:Invent 2014

Amazon Web Services

Operating CloudStack: Sharing My Tool Box @ApacheCon NA'15

Remi Bergsma

CCNA Lab 1-Configuring a Switch Part I

Amir Jafari

This document provides instructions for configuring a Cisco Catalyst 2960 switch. It describes cabling a switch and PC according to a topology diagram and clearing the switch's configuration. The lab steps then guide configuring basic settings on the switch like the hostname, passwords, IP address and default gateway to secure and manage the switch. Verification commands are provided to check the configurations.

SR-IOV+KVM on Debian/Stable

juet-y

This document discusses using SR-IOV and KVM virtual machines on Debian to virtualize high-performance servers requiring low latency and high throughput networking. It describes configuring SR-IOV on the server's Ethernet cards through the BIOS. On Debian, it shows enabling SR-IOV drivers in the kernel, configuring virtual functions, and assigning them to virtual machines using libvirt with PCI device passthrough. VLAN tagging and MAC addresses must be configured separately on the host due to limitations of the Debian version used.

Complete squid & firewall configuration. plus easy mac binding

Chanaka Lasantha

Securing the network for VMs or Containers

Marian Marinov

SR-IOV, KVM and Intel X520 10Gbps cards on Debian/Stable

juet-y

Cisco systems hacking layer 2 ethernet switches

KJ Savaliya

This document discusses layer 2 security attacks on Ethernet switches. It begins with an overview of common layer 2 attacks like MAC address spoofing, VLAN hopping, ARP spoofing, and spanning tree attacks. It then details the MAC flooding attack, which works by overflowing the content-addressable memory (CAM) table of a switch using tools like macof to generate thousands of fake MAC addresses. Once the CAM table is full, traffic is flooded onto the local VLAN. The document recommends port security as a mitigation, which limits the number of MAC addresses that can be learned on each port.

Hacking Layer 2 - Enthernet Switcher Hacking Countermeasures.

Sumutiu Marius

This document discusses layer 2 security attacks on Ethernet switches and their mitigation. It begins with an overview of layer 2 attacks and caveats. It then discusses specific MAC address attacks like CAM overflow attacks, which can be used to flood a switch's CAM table and cause traffic to flood on a VLAN. The document recommends port security features on switches to mitigate MAC flooding attacks by limiting the number of MAC addresses that can be learned or used on a particular port.

Icnd210 s02l01

computerlenguyen

The document discusses VLANs and trunking. It describes the benefits of VLANs such as segmentation, flexibility and security. VLANs help address issues in poorly designed networks like large broadcast domains. The document provides guidelines for designing, implementing and configuring VLANs and trunks including using VTP to synchronize VLAN information between switches. It explains concepts like native VLANs, VLAN trunking and VTP modes.

Understanding Open vSwitch

YongKi Kim

Similar to Unable to access the net app cluster mode 9.2 san through gui after power maintenance (20)

ISAM ALU 7360 5520_ihub_turn_up_procedure

Hướng dẫn cài đặt switch planet layer 3

SR-IOV, KVM and Emulex OneConnect 10Gbps cards on Debian/Stable

Installation of pfSense on Soekris 6501

1-300-206 (SENSS)=Firewall (642-618)

Ccnp3 lab 3_4_en

Important cisco-chow-commands

(SDD419) Amazon EC2 Networking Deep Dive and Best Practices | AWS re:Invent 2014

Operating CloudStack: Sharing My Tool Box @ApacheCon NA'15

CCNA Lab 1-Configuring a Switch Part I

SR-IOV+KVM on Debian/Stable

Complete squid & firewall configuration. plus easy mac binding

Securing the network for VMs or Containers

SR-IOV, KVM and Intel X520 10Gbps cards on Debian/Stable

Cisco systems hacking layer 2 ethernet switches

Hacking Layer 2 - Enthernet Switcher Hacking Countermeasures.

Icnd210 s02l01

Understanding Open vSwitch

More from Saroj Sahu

Autosupport email sending failed issue netapp cluster mode-

Saroj Sahu

How to assign the disks in Netapp storage cluster mode 8.X

Saroj Sahu

Uable to do ssh from the RedHat Linux machine to Netapp filer 7 mode storage ...

Saroj Sahu

How to work seamlessly in your vm without pressing host key again and again

Saroj Sahu

How to see the event and audit logs through ( gui and cli) in cluster ontap n...

Saroj Sahu

How to see the log files through ( gui and cli) in cluster ontap netapp stora...

Saroj Sahu

Snapshot technology Netapp storage

Saroj Sahu

SAN High availability (Netapp Storage)

Saroj Sahu

High availability ensures that network services and data are accessible at all times by configuring storage systems in high availability pairs. When a network interface fails, negotiated failover can trigger an automatic failover of the storage system to prevent loss of connectivity. Enabling negotiated failover and selecting which network interfaces to include allows the storage system to fail over to the other node. The benefits of high availability include uninterrupted data access, and the ability to perform nondisruptive upgrades to storage system components like motherboards, adapters, disks and interfaces.

Aggregate standard for Netapp storage 7 mode

Saroj Sahu

1. Storage teams create aggregates using naming conventions like aggr0, aggr1 to provision storage. They decide the configuration including the RAID type, number of disks, and disk size. 2. When creating an aggregate, factors like recovery speed, data assurance, and storage space must be considered. Larger RAID groups improve performance but increase risk of data loss if multiple disks fail, while smaller groups reduce this risk but decrease performance. 3. Guidelines for RAID group sizing depend on disk type, with ATA/SATA generally having smaller groups than FC/SAS. The default sizes balance speed, protection, and space utilization, though the maximum sizes allow flexibility based on needs.

San1 cifs nfs_snapshot

Saroj Sahu

SAN BASICS..Why we will go for SAN?

Saroj Sahu

Direct attached storage (DAS) involves connecting storage devices like hard disk drives directly to a server without a storage network. This provides exclusive access to the disks for the server but has limitations in scalability and availability. Storage area networks (SANs) address these issues by connecting multiple servers and storage devices via a high-speed dedicated network using fiber channel technology. This allows for centralized management of storage that can be dynamically allocated and accessed simultaneously by multiple servers.

Netapp Deduplication concepts

Saroj Sahu

NetApp deduplication provides block-level deduplication within flexible volumes to reduce storage capacity needs. It works at the 4KB block level on active file systems and can be configured to run automatically or manually. Deduplication uses fingerprints that are unique digital signatures for blocks. During deduplication, fingerprints are compared and any duplicate blocks are replaced with a pointer to the existing data block to save space. Up to 4% additional space may be needed in a volume and up to 3% in an aggregate for deduplication metadata.

More from Saroj Sahu (12)

Autosupport email sending failed issue netapp cluster mode-

How to assign the disks in Netapp storage cluster mode 8.X

Uable to do ssh from the RedHat Linux machine to Netapp filer 7 mode storage ...

How to work seamlessly in your vm without pressing host key again and again

How to see the event and audit logs through ( gui and cli) in cluster ontap n...

How to see the log files through ( gui and cli) in cluster ontap netapp stora...

Snapshot technology Netapp storage

SAN High availability (Netapp Storage)

Aggregate standard for Netapp storage 7 mode

San1 cifs nfs_snapshot

SAN BASICS..Why we will go for SAN?

Netapp Deduplication concepts

Recently uploaded

Observability For You and Me with OpenTelemetry

Eric D. Schabell

Are you interested in dipping your toes in the cloud native observability waters, but as an engineer you are not sure where to get started with tracing problems through your microservices and application landscapes on Kubernetes? Then this is the session for you, where we take you on your first steps in an active open-source project that offers a buffet of languages, challenges, and opportunities for getting started with telemetry data. The project is called openTelemetry, but before diving into the specifics, we’ll start with de-mystifying key concepts and terms such as observability, telemetry, instrumentation, cardinality, percentile to lay a foundation. After understanding the nuts and bolts of observability and distributed traces, we’ll explore the openTelemetry community; its Special Interest Groups (SIGs), repositories, and how to become not only an end-user, but possibly a contributor.We will wrap up with an overview of the components in this project, such as the Collector, the OpenTelemetry protocol (OTLP), its APIs, and its SDKs. Attendees will leave with an understanding of key observability concepts, become grounded in distributed tracing terminology, be aware of the components of openTelemetry, and know how to take their first steps to an open-source contribution! Key Takeaways: Open source, vendor neutral instrumentation is an exciting new reality as the industry standardizes on openTelemetry for observability. OpenTelemetry is on a mission to enable effective observability by making high-quality, portable telemetry ubiquitous. The world of observability and monitoring today has a steep learning curve and in order to achieve ubiquity, the project would benefit from growing our contributor community.

find out more about the role of autonomous vehicles in facing global challenges

huseindihon

Implementations of Fused Deposition Modeling in real world

Emerging Tech

The presentation showcases the diverse real-world applications of Fused Deposition Modeling (FDM) across multiple industries: 1. **Manufacturing**: FDM is utilized in manufacturing for rapid prototyping, creating custom tools and fixtures, and producing functional end-use parts. Companies leverage its cost-effectiveness and flexibility to streamline production processes. 2. **Medical**: In the medical field, FDM is used to create patient-specific anatomical models, surgical guides, and prosthetics. Its ability to produce precise and biocompatible parts supports advancements in personalized healthcare solutions. 3. **Education**: FDM plays a crucial role in education by enabling students to learn about design and engineering through hands-on 3D printing projects. It promotes innovation and practical skill development in STEM disciplines. 4. **Science**: Researchers use FDM to prototype equipment for scientific experiments, build custom laboratory tools, and create models for visualization and testing purposes. It facilitates rapid iteration and customization in scientific endeavors. 5. **Automotive**: Automotive manufacturers employ FDM for prototyping vehicle components, tooling for assembly lines, and customized parts. It speeds up the design validation process and enhances efficiency in automotive engineering. 6. **Consumer Electronics**: FDM is utilized in consumer electronics for designing and prototyping product enclosures, casings, and internal components. It enables rapid iteration and customization to meet evolving consumer demands. 7. **Robotics**: Robotics engineers leverage FDM to prototype robot parts, create lightweight and durable components, and customize robot designs for specific applications. It supports innovation and optimization in robotic systems. 8. **Aerospace**: In aerospace, FDM is used to manufacture lightweight parts, complex geometries, and prototypes of aircraft components. It contributes to cost reduction, faster production cycles, and weight savings in aerospace engineering. 9. **Architecture**: Architects utilize FDM for creating detailed architectural models, prototypes of building components, and intricate designs. It aids in visualizing concepts, testing structural integrity, and communicating design ideas effectively. Each industry example demonstrates how FDM enhances innovation, accelerates product development, and addresses specific challenges through advanced manufacturing capabilities.

MYIR Product Brochure - A Global Provider of Embedded SOMs & Solutions

Linda Zhang

This brochure gives introduction of MYIR Electronics company and MYIR's products and services. MYIR Electronics Limited (MYIR for short), established in 2011, is a global provider of embedded System-On-Modules (SOMs) and comprehensive solutions based on various architectures such as ARM, FPGA, RISC-V, and AI. We cater to customers' needs for large-scale production, offering customized design, industry-specific application solutions, and one-stop OEM services. MYIR, recognized as a national high-tech enterprise, is also listed among the "Specialized and Special new" Enterprises in Shenzhen, China. Our core belief is that "Our success stems from our customers' success" and embraces the philosophy of "Make Your Idea Real, then My Idea Realizing!"

INDIAN AIR FORCE FIGHTER PLANES LIST.pdf

jackson110191

Research Directions for Cross Reality Interfaces

Mark Billinghurst

@Call @Girls Guwahati 🚒 XXXXXXXXXX 🚒 Priya Sharma Beautiful And Cute Girl any...

kantakumariji156

Coordinate Systems in FME 101 - Webinar Slides

Safe Software

If you’ve ever had to analyze a map or GPS data, chances are you’ve encountered and even worked with coordinate systems. As historical data continually updates through GPS, understanding coordinate systems is increasingly crucial. However, not everyone knows why they exist or how to effectively use them for data-driven insights. During this webinar, you’ll learn exactly what coordinate systems are and how you can use FME to maintain and transform your data’s coordinate systems in an easy-to-digest way, accurately representing the geographical space that it exists within. During this webinar, you will have the chance to: - Enhance Your Understanding: Gain a clear overview of what coordinate systems are and their value - Learn Practical Applications: Why we need datams and projections, plus units between coordinate systems - Maximize with FME: Understand how FME handles coordinate systems, including a brief summary of the 3 main reprojectors - Custom Coordinate Systems: Learn how to work with FME and coordinate systems beyond what is natively supported - Look Ahead: Gain insights into where FME is headed with coordinate systems in the future Don’t miss the opportunity to improve the value you receive from your coordinate system data, ultimately allowing you to streamline your data analysis and maximize your time. See you there!

[Talk] Moving Beyond Spaghetti Infrastructure [AOTB] 2024-07-04.pdf

Kief Morris

@Call @Girls Pune 0000000000 Riya Khan Beautiful Girl any Time

amitchopra0215

5G bootcamp Sep 2020 (NPI initiative).pptx

SATYENDRA100

How Netflix Builds High Performance Applications at Global Scale

ScyllaDB

What’s New in Teams Calling, Meetings and Devices May 2024

Stephanie Beckett

How to Avoid Learning the Linux-Kernel Memory Model

ScyllaDB

The Linux-kernel memory model (LKMM) is a powerful tool for developing highly concurrent Linux-kernel code, but it also has a steep learning curve. Wouldn't it be great to get most of LKMM's benefits without the learning curve? This talk will describe how to do exactly that by using the standard Linux-kernel APIs (locking, reference counting, RCU) along with a simple rules of thumb, thus gaining most of LKMM's power with less learning. And the full LKMM is always there when you need it!

@Call @Girls Thiruvananthapuram 🚒 XXXXXXXXXX 🚒 Priya Sharma Beautiful And Cu...

kantakumariji156

What's Next Web Development Trends to Watch.pdf

SeasiaInfotech2

Recent Advancements in the NIST-JARVIS Infrastructure

KAMAL CHOUDHARY

The Increasing Use of the National Research Platform by the CSU Campuses

Larry Smarr

Pigging Solutions Sustainability brochure.pdf

Pigging Solutions

Sustainability requires ingenuity and stewardship. Did you know Pigging Solutions pigging systems help you achieve your sustainable manufacturing goals AND provide rapid return on investment. How? Our systems recover over 99% of product in transfer piping. Recovering trapped product from transfer lines that would otherwise become flush-waste, means you can increase batch yields and eliminate flush waste. From raw materials to finished product, if you can pump it, we can pig it.

20240702 QFM021 Machine Intelligence Reading List June 2024

Matthew Sinclair

Recently uploaded (20)

Observability For You and Me with OpenTelemetry

find out more about the role of autonomous vehicles in facing global challenges

Implementations of Fused Deposition Modeling in real world

MYIR Product Brochure - A Global Provider of Embedded SOMs & Solutions

INDIAN AIR FORCE FIGHTER PLANES LIST.pdf

Research Directions for Cross Reality Interfaces

@Call @Girls Guwahati 🚒 XXXXXXXXXX 🚒 Priya Sharma Beautiful And Cute Girl any...

Coordinate Systems in FME 101 - Webinar Slides

[Talk] Moving Beyond Spaghetti Infrastructure [AOTB] 2024-07-04.pdf

@Call @Girls Pune 0000000000 Riya Khan Beautiful Girl any Time

5G bootcamp Sep 2020 (NPI initiative).pptx

How Netflix Builds High Performance Applications at Global Scale

What’s New in Teams Calling, Meetings and Devices May 2024

How to Avoid Learning the Linux-Kernel Memory Model

@Call @Girls Thiruvananthapuram 🚒 XXXXXXXXXX 🚒 Priya Sharma Beautiful And Cu...

What's Next Web Development Trends to Watch.pdf

Recent Advancements in the NIST-JARVIS Infrastructure

The Increasing Use of the National Research Platform by the CSU Campuses

Pigging Solutions Sustainability brochure.pdf

20240702 QFM021 Machine Intelligence Reading List June 2024

Unable to access the net app cluster mode 9.2 san through gui after power maintenance

1. Issue-:Unable toaccess the NetApp Cluster mode 9.2 SAN throughGUI after power maintenance. Check all the network ports if there is any issuelike any portis down by executing the below command. Cluster-MAIN::>network interfaceshow If any network interface is in down state, make then online by executing the below command. Example-: Cluster-MAIN: :>network interface show cluster_mgmt Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- Cluster-MAIN cluster_mgmtup/up 10.190.218.70/24 Cluster-MAIN-02 e0M false Cluster-MAIN::>network interfacemodify -vserver Cluster-MAIN-lif cluster_mgmt- home-node Cluster-MAIN-02 -home-porte0M -address 10.190.218.70 -netmask 255.255.255.0 -status-admin up

2. Cluster-MAIN: :>network interface show cluster_mgmt Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- Cluster-MAIN cluster_mgmtup/up 10.190.218.70/24 Cluster-MAIN-02 e0M true Unable to accessdue to http webservice isnotenabledasbelow-: Cluster-MAIN::>systemserviceswebshow External WebServices:true Status:online HTTP Protocol Port:80 HTTPS Protocol Port: 443 HTTP Enabled:false To make http Enabledtrue we needtologinintothe advancedmode andexecute the belowcommand. Cluster-MAIN::>set-privilegeadvanced Warning:These advancedcommandsare potentiallydangerous;use themonlywhendirectedtodoso by NetApppersonnel. Do youwant to continue?{y|n}:Y Cluster-MAIN::*>

3. Thenexecute the below command-: Cluster-MAIN::*>systemservice webmodify -external true -per-address-limit80-http-enabledtrue To confirmthe http isenabled execute the below command-: Cluster-MAIN::>systemserviceswebshow External WebServices:true Status:online HTTP Protocol Port:80 HTTPS Protocol Port:443 HTTP Enabled:true Come out fromthe advancedprivilegebyexecutingthe below command-: RARENETAPPCLUS-MAIN::*>set-privilege admin RARENETAPPCLUS-MAIN::> Nowenjoythe accessof NetAppStorage throughGUI Note-:The above describestwoissuesone isclustermanagementLIFwasdownandotherone http service wasdisabledandfixedthe issue. Please docontactfor any suggestions -sarojmsc@gmail.com

Unable to access the net app cluster mode 9.2 san through gui after power maintenance

More Related Content

What's hot

What's hot (19)

Similar to Unable to access the net app cluster mode 9.2 san through gui after power maintenance

Similar to Unable to access the net app cluster mode 9.2 san through gui after power maintenance (20)

More from Saroj Sahu

More from Saroj Sahu (12)

Recently uploaded

Recently uploaded (20)

Unable to access the net app cluster mode 9.2 san through gui after power maintenance