Showing 1–50 of 71 results for author: Dunin-Borkowski, R

Automated detection and mapping of crystal tilt using thermal diffuse scattering in transmission electron microscopy

Authors: Mauricio Cattaneo, Knut Müller-Caspary, Juri Barthel, Katherine E. Mac Arthur, Nicolas Gauquelin, Marta Lipinska-Chwalek, Johan Verbeeck, Leslie J. Allen, Rafal E. Dunin-Borkowski

Abstract: Quantitative interpretation of transmission electron microscopy (TEM) data of crystalline specimens often requires the accurate knowledge of the local crystal orientation. A method is presented which exploits momentum-resolved scanning TEM (STEM) data to determine the local mistilt from a major zone axis. It is based on a geometric analysis of Kikuchi bands within a single diffraction pattern, yie… ▽ More Quantitative interpretation of transmission electron microscopy (TEM) data of crystalline specimens often requires the accurate knowledge of the local crystal orientation. A method is presented which exploits momentum-resolved scanning TEM (STEM) data to determine the local mistilt from a major zone axis. It is based on a geometric analysis of Kikuchi bands within a single diffraction pattern, yielding the centre of the Laue circle. Whereas the approach is not limited to convergent illumination, it is here developed using unit-cell averaged diffraction patterns corresponding to high-resolution STEM settings. In simulation studies, an accuracy of approximately 0.1mrad is found. The method is implemented in automated software and applied to crystallographic tilt and in-plane rotation mapping in two experimental cases. In particular, orientation maps of high-Mn steel and an epitaxially grown La$_{\text{0.7}}$Sr$_{\text{0.3}}$MnO$_{\text{3}}$-SrTiO$_{\text{3}}$ interface are presented. The results confirm the estimates of the simulation study and indicate that tilt mapping can be performed consistently over a wide field of view with diameters well above 100nm at unit cell real space sampling. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Insights into the defect-driven heterogeneous structural evolution of Ni-rich layered cathode in lithium-ion batteries

Authors: Zhongyuan Huang, Ziwei Chen, Maolin Yang, Mihai Chu, Zenan Li, Sihao Deng, Lunhua He, Lei Jin, Rafal E. Dunin-Borkowski, Rui Wang, Jun Wang, Tingting Yang, Yinguo Xiao

Abstract: Recently, considerable efforts have been made on research and improvement for Ni-rich lithium-ion batteries to meet the demand from vehicles and grid-level large-scale energy storage. Development of next-generation high-performance lithium-ion batteries requires a comprehensive understanding on the underlying electrochemical mechanisms associated with its structural evolution. In this work, advanc… ▽ More Recently, considerable efforts have been made on research and improvement for Ni-rich lithium-ion batteries to meet the demand from vehicles and grid-level large-scale energy storage. Development of next-generation high-performance lithium-ion batteries requires a comprehensive understanding on the underlying electrochemical mechanisms associated with its structural evolution. In this work, advanced operando neutron diffraction and four-dimensional scanning transmission electron microscopy techniques are applied to clarify the structural evolution of electrodes in two distinct full cells with identical LiNi0.8Co0.1Mn0.1O2 cathode but different anode counterparts. It is found that both of cathodes in two cells exhibit non-intrinsic two-phase-like behavior at the early charge stage, indicating selective Li+ extraction from cathodes. But the heterogeneous evolution of cathode is less serious with graphite-silicon blended anode than that with graphite anode due to the different delithiation rate. Moreover, it is revealed that the formation of heterogeneous structure is led by the distribution of defects including Li/Ni disordering and microcracks, which should be inhibited by assembling appropriate anode to avoid potential threaten on cell performance. The present work unveils the origin of inhomogeneity in Ni-rich lithium-ion batteries and highlights the significance of kinetics control in electrodes for batteries with higher capacity and longer life. △ Less

Submitted 23 April, 2024; originally announced April 2024.

Comments: 29 pages and 5 figures for manuscript; 30 pages, 14 figures and 4 tables for supplementary information

Embedded skyrmion bags in thin films of chiral magnets

Authors: Luyan Yang, Andrii S. Savchenko, Fengshan Zheng, Nikolai S. Kiselev, Filipp N. Rybakov, Xiaodong Han, Stefan Blügel, Rafal E. Dunin-Borkowski

Abstract: Magnetic skyrmions are topologically nontrivial spin configurations that possess particle-like properties. Earlier research was mainly focused on a specific type of skyrmion with topological charge Q = -1. However, theoretical analyses of two-dimensional chiral magnets have predicted the existence of skyrmion bags -- solitons with arbitrary positive or negative topological charge. Although such sp… ▽ More Magnetic skyrmions are topologically nontrivial spin configurations that possess particle-like properties. Earlier research was mainly focused on a specific type of skyrmion with topological charge Q = -1. However, theoretical analyses of two-dimensional chiral magnets have predicted the existence of skyrmion bags -- solitons with arbitrary positive or negative topological charge. Although such spin textures are metastable states, recent experimental observations have confirmed the stability of isolated skyrmion bags in a limited range of applied magnetic fields. Here, by utilizing Lorentz transmission electron microscopy, we show the extraordinary stability of skyrmion bags in thin plates of B20-type FeGe. In particular, we show that skyrmion bags embedded within a skyrmion lattice remain stable even in zero or inverted external magnetic fields. A robust protocol for nucleating such embedded skyrmion bags is provided. Our results agree perfectly with micromagnetic simulations and establish thin plates of cubic chiral magnets as a powerful platform for exploring a broad spectrum of topological magnetic solitons. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Comments: 17 pages, 15 figures

Simultaneous mapping of magnetic and atomic structure for direct visualization of nanoscale magnetoelastic coupling

Authors: Sangjun Kang, Maximilian Töllner, Di Wang, Christian Minnert, Karsten Durst, Arnaud Caron, Rafal E. Dunin-Borkowski, Jeffrey McCord, Christian Kübel, Xiaoke Mu

Abstract: Achieving a correlative measurement of both magnetic and atomic structures at the nanoscale is imperative to understand the fundamental magnetism of matters and for fostering the development of new magnetic nanomaterials. Conventional microscopy methods fall short in providing the two information simultaneously. Here, we develop a new approach to simultaneously map the magnetic field and atomic st… ▽ More Achieving a correlative measurement of both magnetic and atomic structures at the nanoscale is imperative to understand the fundamental magnetism of matters and for fostering the development of new magnetic nanomaterials. Conventional microscopy methods fall short in providing the two information simultaneously. Here, we develop a new approach to simultaneously map the magnetic field and atomic structure at the nanoscale using Lorentz 4-dimensional scanning transmission electron microscopy (Ltz-4D-STEM). This method enables precise measurement of the characteristic atomic and magnetic structures across an extensive field of view, a critical aspect for investigating real-world ferromagnetic materials. It offers a comprehensive visualization and statistical evaluation of the different structural information at a pixel-by-pixel correlation. The new method allows to directly visualize the magnetoelastic coupling and the resulting complex magnetization arrangement as well as the competition between magnetoelastic and magnetostatic energy. This approach opens new avenues for in-depth studying the structure-property correlation of nanoscale magnetic materials. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 28 pages, 14 figures

Calibrating coordinate system alignment in a scanning transmission electron microscope using a digital twin

Authors: Dieter Weber, David Landers, Chen Huang, Emanuela Liberti, Emiliya Poghosyan, Matthew Bryan, Alexander Clausen, Daniel G. Stroppa, Angus I. Kirkland, Elisabeth Müller, Andrew Stewart, Rafal E. Dunin-Borkowski

Abstract: In four-dimensional scanning transmission electron microscopy (4D STEM) a focused beam is scanned over a specimen and a diffraction pattern is recorded at each position using a pixelated detector. During the experiment, it must be ensured that the scan coordinate system of the beam is correctly calibrated relative to the detector coordinate system. Various simplified and approximate models are use… ▽ More In four-dimensional scanning transmission electron microscopy (4D STEM) a focused beam is scanned over a specimen and a diffraction pattern is recorded at each position using a pixelated detector. During the experiment, it must be ensured that the scan coordinate system of the beam is correctly calibrated relative to the detector coordinate system. Various simplified and approximate models are used implicitly and explicitly for understanding and analyzing the recorded data, requiring translation between the physical reality of the instrument and the abstractions used in data interpretation. Here, we introduce a calibration method where interactive live data processing in combination with a digital twin is used to match a set of models and their parameters with the action of a real-world instrument. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Thermal cycling induced evolution and colossal exchange bias in MnPS3/Fe3GeTe2 van der Waals heterostructures

Authors: Aravind Puthirath Balan, Aditya Kumar, Patrick Reiser, Joseph Vas, Thibaud Denneulin, Khoa Dang Lee, Tom G Saunderson, Märta Tschudin, Clement Pellet-Mary, Debarghya Dutta, Carolin Schrader, Tanja Scholz, Jaco Geuchies, Shuai Fu, Hai Wang, Alberta Bonanni, Bettina V. Lotsch, Ulrich Nowak, Gerhard Jakob, Jacob Gayles, Andras Kovacs, Rafal E. Dunin-Borkowski, Patrick Maletinsky, Mathias Kläui

Abstract: The exchange bias phenomenon, inherent in exchange-coupled ferromagnetic and antiferromagnetic systems, has intrigued researchers for decades. Van der Waals materials, with their layered structure, provide an optimal platform for probing such physical phenomena. However, achieving a facile and effective means to manipulate exchange bias in pristine van der Waals heterostructures remains challengin… ▽ More The exchange bias phenomenon, inherent in exchange-coupled ferromagnetic and antiferromagnetic systems, has intrigued researchers for decades. Van der Waals materials, with their layered structure, provide an optimal platform for probing such physical phenomena. However, achieving a facile and effective means to manipulate exchange bias in pristine van der Waals heterostructures remains challenging. In this study, we investigate the origin of exchange bias in MnPS3/Fe3GeTe2 van der Waals heterostructures. Our work demonstrates a method to modulate unidirectional exchange anisotropy, achieving an unprecedented nearly 1000% variation through simple thermal cycling. Despite the compensated interfacial spin configuration of MnPS3, magneto-transport measurements reveal a huge 170 mT exchange bias at 5 K, the largest observed in pristine van der Waals antiferromagnet-ferromagnet interfaces. This substantial magnitude of the exchange bias is linked to an anomalous weak ferromagnetic ordering in MnPS3 below 40 K. On the other hand, the tunability of exchange bias during thermal cycling is ascribed to the modified arrangement of interfacial atoms and changes in the vdW gap during field cooling. Our findings highlight a robust and easily adjustable exchange bias in van der Waals antiferromagnetic/ferromagnetic heterostructures, presenting a straightforward approach to enhance other interface related spintronic phenomena for practical applications. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Increasing the resolution of transmission electron microscopy by computational ghost imaging

Authors: P. Rosi, L. Viani, E. Rotunno, S. Frabboni, A. H. Tavabi, R. E. Dunin-Borkowski, A. Roncaglia, V. Grillo

Abstract: By means of numerical simulations, we demonstrate the innovative use of computational ghost imaging in transmission electron microscopy to retrieve images with a resolution that overcomes the limitations imposed by coherent aberrations. The method requires measuring the intensity on a single pixel detector with a series of structured illuminations. The success of the technique is improved if the p… ▽ More By means of numerical simulations, we demonstrate the innovative use of computational ghost imaging in transmission electron microscopy to retrieve images with a resolution that overcomes the limitations imposed by coherent aberrations. The method requires measuring the intensity on a single pixel detector with a series of structured illuminations. The success of the technique is improved if the probes are made to resemble the sample and the patterns cover the area of interest evenly. By using a simple 8 electrode device as a specific example, a 2-fold increase in resolution beyond the aberration limit is demonstrated to be possible under realistic experimental conditions. △ Less

Submitted 10 November, 2023; originally announced January 2024.

Comments: 8 pages, 3 figures

Direct observation of altermagnetic band splitting in CrSb thin films

Authors: Sonka Reimers, Lukas Odenbreit, Libor Smejkal, Vladimir N. Strocov, Procopios Constantinou, Anna Birk Hellenes, Rodrigo Jaeschke Ubiergo, Warlley H. Campos, Venkata K. Bharadwaj, Atasi Chakraborty, Thiboud Denneulin, Wen Shi, Rafal E. Dunin-Borkowski, Suvadip Das, Mathias Kläui, Jairo Sinova, Martin Jourdan

Abstract: Altermagnetism represents an emergent collinear magnetic phase with compensated order and an unconventional alternating even-parity wave spin order in the non-relativistic band structure. We investigate directly this unconventional band splitting near the Fermi energy through spinintegrated soft X-ray angular resolved photoemission spectroscopy. The experimentally obtained angle-dependent photoemi… ▽ More Altermagnetism represents an emergent collinear magnetic phase with compensated order and an unconventional alternating even-parity wave spin order in the non-relativistic band structure. We investigate directly this unconventional band splitting near the Fermi energy through spinintegrated soft X-ray angular resolved photoemission spectroscopy. The experimentally obtained angle-dependent photoemission intensity, acquired from epitaxial thin films of the predicted altermagnet CrSb, demonstrates robust agreement with the corresponding band structure calculations. In particular, we observe the distinctive splitting of an electronic band on a low-symmetry path in the Brilliouin zone that connects two points featuring symmetry-induced degeneracy. The measured large magnitude of the spin splitting of approximately 0.6 eV and the position of the band just below the Fermi energy underscores the signifcance of altermagnets for spintronics based on robust broken time reversal symmetry responses arising from exchange energy scales, akin to ferromagnets, while remaining insensitive to external magnetic fields and possessing THz dynamics, akin to antiferromagnets. △ Less

Submitted 20 February, 2024; v1 submitted 26 October, 2023; originally announced October 2023.

Comments: 13 pages, 9 figures (including supplementary information)

Journal ref: Nat Commun 15, 2116 (2024)

Atomically resolved phase coexistence in VO2 thin films

Authors: Masoud Ahmadi, Atul Atul, Sytze de Graaf, Ewout van der Veer, Ansgar Meise, Amir Hossein Tavabi, Marc Heggen, Rafal E. Dunin-Borkowski, Majid Ahmadi, Bart J. Kooi

Abstract: Concurrent structural and electronic transformations in VO2 thin films are of twofold importance: enabling fine-tuning of the emergent electrical properties in functional devices, yet creating an intricate interfacial domain structure of transitional phases. Despite the importance of understanding the structure of VO2 thin films, a detailed real space atomic structure analysis in which also the ox… ▽ More Concurrent structural and electronic transformations in VO2 thin films are of twofold importance: enabling fine-tuning of the emergent electrical properties in functional devices, yet creating an intricate interfacial domain structure of transitional phases. Despite the importance of understanding the structure of VO2 thin films, a detailed real space atomic structure analysis in which also the oxygen atomic columns are resolved is lacking. Moreover, intermediate atomic structures have remained elusive due to the lack of robust atomically resolved quantitative analysis. Here, we directly resolve both V and O atomic columns and discover the presence of the strain-stabilized intermediate monoclinic (M2) phase nanolayers (less than 2 nm thick) in epitaxially grown VO2 films on a TiO2 (001) substrate, where the dominant part of VO2 undergoes a transition from the tetragonal (rutile) phase to the monoclinic M1 phase. We unfold the crucial role of imaging the spatial configurations of the oxygen anions (in addition to V cations) utilizing atomic-resolution electron microscopy. Our approach sets a direct pathway to unravel the structural transitions in wide range of correlated oxides, offering substantial implications for e.g. optoelectronics and ferroelectrics. △ Less

Submitted 30 September, 2023; originally announced October 2023.

Comments: 17 pages, 4 figures

Quantifying the large contribution from orbital Rashba effect to the effective damping-like torque on magnetization

Authors: S. Krishnia, B. Bony, E. Rongione, L. Moreno Vicente-Arche, T. Denneulin, Y. Lu, R. E. Dunin-Borkowski, S. Collin, A. Fert, J. -M. George, N. Reyren, V. Cros, H. Jaffrès

Abstract: The generation of large spin currents, and the associated spin torques, which are at the heart of modern spintronics, have long been achieved by charge-to-spin conversion mechanisms, i.e. the spin Hall effect and/or the Rashba effect, intrinsically linked to a strong spin-orbit coupling. Recently, a novel path has been predicted and observed for achieving significant current-induced torques origin… ▽ More The generation of large spin currents, and the associated spin torques, which are at the heart of modern spintronics, have long been achieved by charge-to-spin conversion mechanisms, i.e. the spin Hall effect and/or the Rashba effect, intrinsically linked to a strong spin-orbit coupling. Recently, a novel path has been predicted and observed for achieving significant current-induced torques originating from light elements, hence possessing a weak spin-orbit interaction. These findings point out to the potential involvement of the orbital counterpart of electrons, namely the orbital Hall and orbital Rashba effects. In this study, we aim at quantifying these orbital-related contributions to the effective torques acting on a thin Co layer in different systems. First, in Pt|Co|Cu|AlOx stacking, we demonstrate a comparable torque strength coming from the conversion due to the orbital Rashba effect at the Cu|AlOx interface and the one from the effective spin Hall effect in bottom Pt|Co system. Secondly, in order to amplify the orbital-to-spin conversion, we investigate the impact of an intermediate Pt layer in Co|Pt|Cu|CuOx. From the Pt thickness dependence of the effective torques determined by harmonic Hall measurements complemented by spin Hall magneto-resistance and THz spectroscopy experiments, we demonstrate that a large orbital Rashba effect is present at the Cu|CuOx interface, leading to a twofold enhancement of the net torques on Co for the optimal Pt thickness. Our findings not only demonstrate the crucial role that orbital currents can play in low-dimensional systems with weak spin-orbit coupling, but also reveal that they enable more energy efficient manipulation of magnetization in spintronic devices. △ Less

Submitted 19 January, 2024; v1 submitted 27 September, 2023; originally announced September 2023.

Comments: 12 pages,6 figures

Magnetic Phase Imaging using Lorentz Near-field Electron Ptychography

Authors: Shengbo You, Peng-Han Lu, András Kovács, Thomas Schachinger, Frederick Allars, Rafal E. Dunin-Borkowski, Andrew M. Maiden

Abstract: Over the past few years, the combination of diffuser and near-field electron ptychography has drawn more attention by its ability to recover large field of view with few diffraction patterns. In this paper, we purpose a novel design and implementation of amplitude diffuser. The amplitude diffuser introduces structures to the illumination while reducing the inelastic scattering. And the amplitude d… ▽ More Over the past few years, the combination of diffuser and near-field electron ptychography has drawn more attention by its ability to recover large field of view with few diffraction patterns. In this paper, we purpose a novel design and implementation of amplitude diffuser. The amplitude diffuser introduces structures to the illumination while reducing the inelastic scattering. And the amplitude diffuser is implemented at the condenser lens aperture, allowing us to vary the illumination size under the same microscope setup. We demonstrate the reconstruction results under both conventional Transmission Electron Microscopy (TEM) mode as well as Lorentz mode. △ Less

Submitted 26 July, 2023; originally announced August 2023.

Comments: Presented in ISCS23

Report number: ISCS23-17

Live Iterative Ptychography

Authors: Dieter Weber, Simeon Ehrig, Andreas Schropp, Alexander Clausen, Silvio Achilles, Nico Hoffmann, Michael Bussmann, Rafal Dunin-Borkowski, Christian G. Schroer

Abstract: We demonstrate live-updating ptychographic reconstruction with ePIE, an iterative ptychography method, during ongoing data acquisition. The reconstruction starts with a small subset of the total data, and as the acquisition proceeds the data used for reconstruction is extended. This creates a live-updating view of object and illumination that allows monitoring the ongoing experiment and adjusting… ▽ More We demonstrate live-updating ptychographic reconstruction with ePIE, an iterative ptychography method, during ongoing data acquisition. The reconstruction starts with a small subset of the total data, and as the acquisition proceeds the data used for reconstruction is extended. This creates a live-updating view of object and illumination that allows monitoring the ongoing experiment and adjusting parameters with quick turn-around. This is particularly advantageous for long-running acquisitions. We show that such a gradual reconstruction yields interpretable results already with a small subset of the data. We show simulated live processing with various scan patterns, parallelized reconstruction, and real-world live processing at the hard X-ray ptychographic nanoanalytical microscope PtyNAMi at the PETRA III beamline. △ Less

Submitted 5 February, 2024; v1 submitted 21 August, 2023; originally announced August 2023.

Driving skyrmions in flow regime in synthetic ferrimagnets

Authors: Sougata Mallick, Yanis Sassi, Nicholas Figueiredo Prestes, Sachin Krishnia, Fernando Gallego, Thibaud Denneulin, Sophie Collin, Karim Bouzehouane, André Thiaville, Rafal E. Dunin-Borkowski, Vincent Jeudy, Albert Fert, Nicolas Reyren, Vincent Cros

Abstract: Despite significant advances in the last decade regarding the room temperature stabilization of skyrmions or their current induced dynamics, the impact of local material inhomogeneities still remains an important issue that impedes to reach the regime of steady state motion of these spin textures. Here, we study the spin-torque driven motion of skyrmions in synthetic ferrimagnetic multilayers with… ▽ More Despite significant advances in the last decade regarding the room temperature stabilization of skyrmions or their current induced dynamics, the impact of local material inhomogeneities still remains an important issue that impedes to reach the regime of steady state motion of these spin textures. Here, we study the spin-torque driven motion of skyrmions in synthetic ferrimagnetic multilayers with the aim of achieving high mobility and reduced skyrmion Hall effect. We consider Pt|Co|Tb multilayers of various thicknesses with antiferromagnetic coupling between the Co and Tb magnetization. The increase of Tb thickness in the multilayers allows to reduce the total magnetic moment and increases the spin-orbit torques allowing to reach velocities up to 400 m.s-1 for skyrmions with diameters of about 160 nm. We demonstrate that due to reduced skyrmion Hall effect, combined with the edge repulsion of the magnetic track making the skyrmions moving along the track without any transverse deflection. Further, by comparing the field-induced domain wall motion and current-induced skyrmion motion, we demonstrate that the skyrmions at the largest current densities present all the characteristics of a dynamical flow regime. △ Less

Submitted 1 June, 2023; v1 submitted 30 May, 2023; originally announced May 2023.

Comments: 14 pages, 4 figures

Influence of amorphous phase on coercivity in SmCo5-Cu nanocomposites

Authors: Franziska Staab, Yangyiwei Yang, Eren Foya, Enrico Bruder, Benjamin Zingsem, Esmaeil Adabifiroozjaei, Konstantin Skokov, Michael Farle, Rafal E. Dunin-Borkowski, Leopoldo Molina-Luna, Oliver Gutfleisch, Bai-Xiang Xu, Karsten Durst

Abstract: Severe plastic deformation of powder blends consisting of SmCo5-Cu results in magnetically hardened nanocomposite bulk materials. The microstructure is continuously refined with increasing torsional deformation, yet, coercivity saturates at a certain level of strain. Transmission electron microscopy (TEM) investigation of the microstructure reveals a partial amorphization of the SmCo5 phase due to… ▽ More Severe plastic deformation of powder blends consisting of SmCo5-Cu results in magnetically hardened nanocomposite bulk materials. The microstructure is continuously refined with increasing torsional deformation, yet, coercivity saturates at a certain level of strain. Transmission electron microscopy (TEM) investigation of the microstructure reveals a partial amorphization of the SmCo5 phase due to high-pressure torsion by 20 applied rotations. In this amorphous matrix nanocrystals are embedded. The effect of these experimentally observed microstructural features on the magnetic properties are investigated by micromagnetic simulations, which show that an increasing volume fraction of nanocrystals is beneficial for higher coercivities. For a fixed volume fraction of nanocrystals the simulations reveal an increasing coercivity with decreasing the size of the nanocrystals due to increasing number of interfaces acting as pinning sites. Furthermore, our micromagnetic simulations disclose the mechanisms of the saturation and decline of magnetic hardening due to the strain induced by high-pressure torsion. The calculated coercivity fits very well to the experimentally observed coercivity of Hc=1.34 T. The knowledge can also be used to develop and provide optimization strategies from the microstructure perspective. △ Less

Submitted 15 May, 2023; originally announced May 2023.

Journal ref: Scripta Mater. 240 (2024) 115808

The Premartensite and Martensite in Fe50Rh50 System

Authors: Esmaeil Adabifiroozjaei, Fernando Maccari, Lukas Schaefer, Tianshu Jiang, Oscar Recalde-Benitez, Alisa Chirkova, Navid Shayanfar, Imants Dirba, Nagaarjhuna A Kani, Olga Shuleshova, Robert Winkler, Alexander Zintler, Ziyuan Rao, Lukas Pfeuffer, Andras Kovacs, Rafal E Dunin-Borkowski, Michael Farle, Konstantin Skokov, Baptiste Gault, Markus Gruner, Oliver Gutfleisch, Leopoldo Molina-Luna

Abstract: Metallic/intermetalic materials with BCC structures hold an intrinsic instability due to phonon softening along [110] dirrection, causing BCC to lower-symmetry phases transformation when the BCC structures are thermally or mechanically stressed. Fe50Rh50 binary system is one of the exceptional BCC structures (ordered-B2) that has not been yet showing such transformation upon application of thermal… ▽ More Metallic/intermetalic materials with BCC structures hold an intrinsic instability due to phonon softening along [110] dirrection, causing BCC to lower-symmetry phases transformation when the BCC structures are thermally or mechanically stressed. Fe50Rh50 binary system is one of the exceptional BCC structures (ordered-B2) that has not been yet showing such transformation upon application of thermal stress, although mechanical deformation results in B2 to disordered FCC (gamma) and L10 phases transformation. Here, a comprehensive transmission electron microscopy (TEM) study is conducted on thermally-stressed samples of Fe50Rh50 aged at water and liquid nitrogen from 1150 degree C and 1250 degree C. The results show that, samples quenched from 1150 degree C into water and liquid nitrogen show presence of 1/4{110} and 1/2{110} satellite reflections, the latter of which is expected from phonon dispersion curves obtained by density functional theory calculation. Therefore, it is believed that Fe50Rh50 maintains the B2 structure that is in premartensite state. Once Fe50Rh50 is quenched from 1250 degree C into liquid nitrogen, formation of two short-range ordered tetragonal phases with various c/a ratios (~1.15 and 1.4) is observed in line with phases formed from mechanically deformed (30%) sample. According to our observations, an accurate atomistic shear model ({110}<1-10>) is presented that describes the martensitic transformation of B2 to these tetragonal phases. These findings offer implications useful for understanding of magnetic and physical characteristics of metallic/intermetallic materials. △ Less

Submitted 3 May, 2023; v1 submitted 2 May, 2023; originally announced May 2023.

Towards engineering the perfect defect in high-performing permanent magnets

Authors: S. Giron, N. Polin, E. Adabifiroozjaei, Y. Yang, A. Kovács, T. P. Almeida, D. Ohmer, K. Üstüner, A. Saxena, M. Katter, I. A. Radulov, C. Freysoldt, R. E. Dunin-Borkowski, M. Farle, K. Durst, H. Zhang, L. Alff, K. Ollefs, B. -X. Xu, O. Gutfleisch, L. Molina-Luna, B. Gault, K. P. Skokov

Abstract: Permanent magnets draw their properties from a complex interplay, across multiple length scales, of the composition and distribution of their constituting phases, that act as building blocks, each with their associated intrinsic properties. Gaining a fundamental understanding of these interactions is hence key to decipher the origins of their magnetic performance and facilitate the engineering of… ▽ More Permanent magnets draw their properties from a complex interplay, across multiple length scales, of the composition and distribution of their constituting phases, that act as building blocks, each with their associated intrinsic properties. Gaining a fundamental understanding of these interactions is hence key to decipher the origins of their magnetic performance and facilitate the engineering of better-performing magnets, through unlocking the design of the "perfect defects" for ultimate pinning of magnetic domains. Here, we deployed advanced multiscale microscopy and microanalysis on a bulk Sm2(CoFeCuZr)17 pinning-type high-performance magnet with outstanding thermal and chemical stability. Making use of regions with different chemical compositions, we showcase how both a change in the composition and distribution of copper, along with the atomic arrangements enforce the pinning of magnetic domains, as imaged by nanoscale magnetic induction mapping. Micromagnetic simulations bridge the scales to provide an understanding of how these peculiarities of micro- and nanostructure change the hard magnetic behaviour of Sm2(CoFeCuZr)17 magnets. Unveiling the origins of the reduced coercivity allows us to propose an atomic-scale defect and chemistry manipulation strategy to define ways toward future hard magnets. △ Less

Submitted 4 June, 2023; v1 submitted 28 April, 2023; originally announced April 2023.

Element-Specific Study of Magnetic Anisotropy and Hardening in SmCo$_{5-x}$Cu$_{x}$ Thin Films

Authors: Georgia Gkouzia, Damian Günzing, Ruiwen Xie, Teresa Weßels, András Kovács, Alpha T. N Diaye, Márton Major, J. P. Palakkal, Rafal E. Dunin-Borkowski, Heiko Wende, Hongbin Zhang, Katharina Ollefs, Lambert Alff

Abstract: This work investigates the effect of copper substitution on the magnetic properties of SmCo$_{5}$ thin films synthesized by molecular beam epitaxy. A series of thin films with varying concentrations of Cu were grown under otherwise identical conditions to disentangle structural and compositional effects on the magnetic behavior. The combined experimental and theoretical studies show that Cu substi… ▽ More This work investigates the effect of copper substitution on the magnetic properties of SmCo$_{5}$ thin films synthesized by molecular beam epitaxy. A series of thin films with varying concentrations of Cu were grown under otherwise identical conditions to disentangle structural and compositional effects on the magnetic behavior. The combined experimental and theoretical studies show that Cu substitution at the Co$_{3g}$ sites not only stabilizes the formation of the SmCo$_{5}$ structure but enhances magnetic anisotropy and coercivity. Density functional theory calculations indicate that Sm(Co$_4$Cu$_{3g}$)$_5$ possesses a higher single-ion anisotropy as compared to pure SmCo$_{5}$. In addition, X-ray magnetic circular dichroism reveals that Cu substitution causes an increasing decoupling of the Sm 4\textit{f} and Co 3\textit{d} moments. Scanning transmission electron microscopy confirms predominantly SmCo$_{5}$ phase formation and reveals nanoscale inhomogeneities in the Cu and Co distribution. Our study based on thin film model systems and advanced characterization as well as modeling reveals novel aspects of the complex interplay of intrinsic and extrinsic contributions to magnetic hysteresis in rare earth-based magnets, \textit{i.e.} the combination of increased intrinsic anisotropy due to Cu substitution and the extrinsic effect of inhomogeneous elemental distribution of Cu and Co. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Harnessing van der Waals CrPS4 and Surface Oxides for non-monotonic pre-set field induced Exchange Bias in Fe3GeTe2

Authors: Aravind Puthirath Balan, Aditya Kumar, Tanja Scholz, Zhongchong Lin, Aga Shahee, Shuai Fu, Thibaud Denneulin, Joseph Vas, Andras Kovacs, Rafal E. Dunin-Borkowski, Hai I. Wang, Jinbo Yang, Bettina Lotsch, Ulrich Nowak, Mathias Klaeui

Abstract: Two-dimensional van der Waals (vdW) heterostructures are an attractive platform for studying exchange bias due to their defect free and atomically flat interfaces. Chromium thiophosphate (CrPS4), an antiferromagnetic material, possesses uncompensated magnetic spins in a single layer, rendering it a promising candidate for exploring exchange bias phenomena. Recent findings have highlighted that nat… ▽ More Two-dimensional van der Waals (vdW) heterostructures are an attractive platform for studying exchange bias due to their defect free and atomically flat interfaces. Chromium thiophosphate (CrPS4), an antiferromagnetic material, possesses uncompensated magnetic spins in a single layer, rendering it a promising candidate for exploring exchange bias phenomena. Recent findings have highlighted that naturally oxidized vdW ferromagnetic Fe3GeTe2 exhibits exchange bias, attributed to the antiferromagnetic coupling of its ultrathin surface oxide layer (O-FGT) with the underlying unoxidized Fe3GeTe2. Anomalous Hall measurements are employed to scrutinize the exchange bias within the CrPS4/(O-FGT)/Fe3GeTe2 heterostructure. This analysis takes into account the contributions from both the perfectly uncompensated interfacial CrPS4 layer and the interfacial oxide layer. Intriguingly, a distinct and non-monotonic exchange bias trend is observed as a function of temperature below 140 K. The occurrence of exchange bias induced by a 'pre-set field' implies that the prevailing phase in the polycrystalline surface oxide is ferrimagnetic Fe3O4. Moreover, the exchange bias induced by the ferrimagnetic Fe3O4 is significantly modulated by the presence of the van der Waals antiferromagnetic CrPS4 layer, forming a heterostructure, along with additional iron oxide phases within the oxide layer. These findings underscore the intricate and complex nature of exchange bias in van der Waals heterostructures, highlighting their potential for tailored manipulation and control. △ Less

Submitted 16 February, 2024; v1 submitted 23 March, 2023; originally announced March 2023.

Journal ref: ACS Nano, 2024

Field-free switching of perpendicular magnetization in an ultrathin epitaxial magnetic insulator

Authors: Sajid Husain, Olivier Fayet, Nicholas F. Prestes, Sophie Collin, Florian Godel, Eric Jacquet, Thibaud Denneulin, Rafal E. Dunin-Borkowski, André Thiaville, Manuel Bibes, Nicolas Reyren, Henri Jaffrès, Albert Fert, Jean-Marie George

Abstract: For energy efficient and fast magnetic memories, switching of perpendicular magnetization by the spin-orbit torque (SOT) appears as a very promising solution, even more using magnetic insulators that suppress electrical shunting. This SOT switching generally requires the assistance of an in-plane magnetic field to break the symmetry. Here, we present experiments demonstrating the field-free SOT sw… ▽ More For energy efficient and fast magnetic memories, switching of perpendicular magnetization by the spin-orbit torque (SOT) appears as a very promising solution, even more using magnetic insulators that suppress electrical shunting. This SOT switching generally requires the assistance of an in-plane magnetic field to break the symmetry. Here, we present experiments demonstrating the field-free SOT switching of perpendicularly magnetized layers of the thulium iron garnet (Tm_{3}Fe_{5}O_{12}) magnetic insulator. The polarity of the switching loops, clockwise (CW) or counter-clockwise (CCW), is determined by the direction of the initial current pulses, in contrast with field-assisted switchings in which this polarity is controlled by the direction of the field. After an independent determination of Dzyaloshinskii-Moriya interaction (DMI), we relate the field free switching to the interplay of SOT and DMI and the polarity of the loops to the imprint of a Néel domain wall induced by the first pulse, in agreement with Kerr imaging. Our observation and interpretation of field-free electrical switching of a magnetic insulator is an important milestone for future low power spintronic devices. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 11 pages, 4 figures

Wigner Distribution Deconvolution Adaptation for Live Ptychography Reconstruction

Authors: Arya Bangun, Paul F. Baumeister, Alexander Clausen, Dieter Weber, Rafal E. Dunin-Borkowski

Abstract: We propose a modification of Wigner Distribution Deconvolution (WDD) to support live processing ptychography. Live processing allows to reconstruct and display the specimen transfer function gradually while diffraction patterns are acquired. For this purpose we reformulate WDD and apply a dimensionality reduction technique that reduces memory consumption and increases processing speed. We show num… ▽ More We propose a modification of Wigner Distribution Deconvolution (WDD) to support live processing ptychography. Live processing allows to reconstruct and display the specimen transfer function gradually while diffraction patterns are acquired. For this purpose we reformulate WDD and apply a dimensionality reduction technique that reduces memory consumption and increases processing speed. We show numerically that this approach maintains the reconstruction quality of specimen transfer functions as well as reduces computational complexity during acquisition processes. Although we only present the reconstruction for Scanning Transmission Electron Microscopy (STEM) datasets, in general, the live processing algorithm we present in this paper can be applied to real-time ptychographic reconstruction for different fields of application. △ Less

Submitted 2 December, 2022; originally announced December 2022.

Journal ref: Microscopy and Microanalysis 2023

A quantum logic gate for free electrons

Authors: Stefan Löffler, Thomas Schachinger, Peter Hartel, Peng-Han Lu, Rafal E. Dunin-Borkowski, Martin Obermair, Manuel Dries, Dagmar Gerthsen, Peter Schattschneider

Abstract: The topological charge $m$ of vortex electrons spans an infinite-dimensional Hilbert space. Selecting a two-dimensional subspace spanned by $m=\pm 1$, a beam electron in a transmission electron microscope (TEM) can be considered as a quantum bit (qubit) freely propagating in the column. A combination of electron optical quadrupole lenses can serve as a universal device to manipulate such qubits at… ▽ More The topological charge $m$ of vortex electrons spans an infinite-dimensional Hilbert space. Selecting a two-dimensional subspace spanned by $m=\pm 1$, a beam electron in a transmission electron microscope (TEM) can be considered as a quantum bit (qubit) freely propagating in the column. A combination of electron optical quadrupole lenses can serve as a universal device to manipulate such qubits at the experimenter's discretion. We set up a TEM probe forming lens system as a quantum gate and demonstrate its action numerically and experimentally. High-end TEMs with aberration correctors are a promising platform for such experiments, opening the way to study quantum logic gates in the electron microscope. △ Less

Submitted 30 June, 2023; v1 submitted 15 September, 2022; originally announced September 2022.

Journal ref: Quantum 7, 1050 (2023)

Current-driven writing process in antiferromagnetic Mn2Au for memory applications

Authors: Sonka Reimers, Yaryna Lytvynenko, Yuran Niu, Evangelos Golias, Brice Sarpi, Larissa Ishibe-Veiga, Thibauld Denneulin, Andras Kovacs, Rafal Dunin-Borkowski, Jonathan Bläßer, Mathias Kläui, Martin Jourdan

Abstract: Current pulse driven Neel vector rotation in metallic antiferromagnets is one of the most promising concepts in antiferromagnetic spintronics. We show microscopically that the Neel vector of epitaxial thin films of the prototypical compound Mn2Au can be reoriented reversibly in the complete area of cross shaped device structures using single current pulses. The resulting domain pattern with aligne… ▽ More Current pulse driven Neel vector rotation in metallic antiferromagnets is one of the most promising concepts in antiferromagnetic spintronics. We show microscopically that the Neel vector of epitaxial thin films of the prototypical compound Mn2Au can be reoriented reversibly in the complete area of cross shaped device structures using single current pulses. The resulting domain pattern with aligned staggered magnetization is long term stable enabling memory applications. We achieve this switching with low heating of 20 K, which is promising regarding fast and efficient devices without the need for thermal activation. Current polarity dependent reversible domain wall motion demonstrates a Neel spin-orbit torque acting on the domain walls. △ Less

Submitted 21 December, 2022; v1 submitted 8 August, 2022; originally announced August 2022.

Comments: 9 pages, 9 figures

Journal ref: Nature Communications, 14, 1861 (2023)

Effect of gallium termination on InGaAs wetting layer properties in droplet epitaxy InGaAs quantum dots

Authors: David Fricker, Paola Atkinson, Mihail I Lepsa, Zheng Zeng, András Kovács, Lidia Kibkalo, Rafal E Dunin-Borkowski, Beata E. Kardynał

Abstract: Self-assembled quantum dots based on III-V semiconductors have excellent properties for applications in quantum optics. However, the presence of a 2D wetting layer which forms during the Stranski-Krastanov growth of quantum dots can limit their performance. Here, we investigate wetting layer formation during quantum dot growth by the alternative droplet epitaxy technique. We use a combination of p… ▽ More Self-assembled quantum dots based on III-V semiconductors have excellent properties for applications in quantum optics. However, the presence of a 2D wetting layer which forms during the Stranski-Krastanov growth of quantum dots can limit their performance. Here, we investigate wetting layer formation during quantum dot growth by the alternative droplet epitaxy technique. We use a combination of photoluminescence excitation spectroscopy, lifetime measurements, and transmission electron microscopy to identify the presence of an InGaAs wetting layer in these droplet epitaxy quantum dots, even in the absence of distinguishable wetting layer photoluminescence. We observe that increasing the amount of Ga deposited on a GaAs (100) surface prior to the growth of InGaAs quantum dots leads to a significant reduction in the emission wavelength of the wetting layer to the point where it can no longer be distinguished from the GaAs acceptor peak emission in photoluminescence measurements. △ Less

Submitted 4 June, 2022; originally announced June 2022.

Diversity of states in a chiral magnet nanocylinder

Authors: Andrii S. Savchenko, Fengshan Zheng, Nikolai S. Kiselev, Luyan Yang, Filipp N. Rybakov, Stefan Blügel, Rafal E. Dunin-Borkowski

Abstract: The diversity of three-dimensional magnetic states in a FeGe nanocylinder is studied using micromagnetic simulations and off-axis electron holography in the transmission electron microscope. In particular, we report the observation of a dipole string -- a spin texture composed of two coupled Bloch points -- which becomes stable under geometrical confinement. Quantitative agreement is obtained betw… ▽ More The diversity of three-dimensional magnetic states in a FeGe nanocylinder is studied using micromagnetic simulations and off-axis electron holography in the transmission electron microscope. In particular, we report the observation of a dipole string -- a spin texture composed of two coupled Bloch points -- which becomes stable under geometrical confinement. Quantitative agreement is obtained between experimental and theoretical phase shift images by taking into account the presence of a damaged layer on the surface of the nanocylinder. The theoretical model is based on the assumption that the damaged surface layer, which results from focused ion beam milling during sample preparation, has similar magnetic properties to those of an amorphous FeGe alloy. The results highlight the importance of considering the magnetic properties of the surface layers of such nanoscale samples, which influence their magnetic states. △ Less

Submitted 11 May, 2022; originally announced May 2022.

Comments: 6 pages, 3 figures

Journal ref: APL Mater. 10, 061110 (2022)

Skyrmionic Spin Structures in Layered Fe5GeTe2 Up To Room Temperature

Authors: Maurice Schmitt, Thibaud Denneulin, András Kovács, Tom G. Saunderson, Philipp Rüßmann, Aga Shahee, Tanja Scholz, Amir Tavabi, Martin Gradhand, Phivos Mavropoulos, Bettina Lotsch, Rafal Dunin-Borkowski, Yuriy Mokrousov, Stefan Blügel, Mathias Kläui

Abstract: The role of the crystal lattice, temperature and magnetic field for the spin structure formation in the 2D van der Waals magnet Fe5GeTe2 is a key open question. Using Lorentz transmission electron microscopy, we experimentally observe topological spin structures up to room temperature in the metastable pre-cooling and stable post-cooling phase of Fe5GeTe2. Over wide temperature and field ranges, s… ▽ More The role of the crystal lattice, temperature and magnetic field for the spin structure formation in the 2D van der Waals magnet Fe5GeTe2 is a key open question. Using Lorentz transmission electron microscopy, we experimentally observe topological spin structures up to room temperature in the metastable pre-cooling and stable post-cooling phase of Fe5GeTe2. Over wide temperature and field ranges, skyrmionic magnetic bubbles form without preferred chirality, which is indicative of a centrosymmetric crystal structure. In the pre-cooling phase, these bubbles are observable even without the application of an external field, while in the post-cooling phase, a transformation from bubble domains to stripe domains is seen. To understand the magnetic order in Fe5GeTe2 we compare macroscopic magnetometry characterization results with microscopic density functional theory calculation. Our results show that even up to room temperature, topological spin structures can be stabilized in centrosymmetric van der Waals magnets. △ Less

Submitted 2 May, 2022; v1 submitted 24 April, 2022; originally announced April 2022.

Comments: 25 pages, 10 figures

Near-real-time diagnosis of electron optical phase aberrations in scanning transmission electron microscopy using an artificial neural network

Authors: Giovanni Bertoni, Enzo Rotunno, Daan Marsmans, Peter Tiemeijer, Amir H. Tavabi, Rafal E. Dunin-Borkowski, Vincenzo Grillo

Abstract: The key to optimizing spatial resolution in a state-of-the-art scanning transmission electron microscope is the ability to precisely measure and correct for electron optical aberrations of the probe-forming lenses. Several diagnostic methods for aberration measurement and correction with maximum precision and accuracy have been proposed, albeit often at the cost of relatively long acquisition time… ▽ More The key to optimizing spatial resolution in a state-of-the-art scanning transmission electron microscope is the ability to precisely measure and correct for electron optical aberrations of the probe-forming lenses. Several diagnostic methods for aberration measurement and correction with maximum precision and accuracy have been proposed, albeit often at the cost of relatively long acquisition times. Here, we illustrate how artificial intelligence can be used to provide near-real-time diagnosis of aberrations from individual Ronchigrams. The demonstrated speed of aberration measurement is important as microscope conditions can change rapidly, as well as for the operation of MEMS-based hardware correction elements that have less intrinsic stability than conventional electromagnetic lenses. △ Less

Submitted 23 April, 2022; originally announced April 2022.

Comments: 18 pages, 5 figures, 1 table

Journal ref: Ultramicroscopy 2023

Magnetic particle-antiparticle creation and annihilation

Authors: Fengshan Zheng, Nikolai S. Kiselev, Luyan Yang, Vladyslav M. Kuchkin, Filipp N. Rybakov, Stefan Blügel, Rafal E. Dunin-Borkowski

Abstract: A fundamental property of particles and antiparticles, such as electrons and positrons, is their ability to annihilate one another. Similar behavior is predicted for magnetic solitons -- localized spin textures that can be distinguished by their topological index $Q$. Theoretically, magnetic topological solitons with opposite values of $Q$, such as skyrmions and their antiparticles -- antiskyrmion… ▽ More A fundamental property of particles and antiparticles, such as electrons and positrons, is their ability to annihilate one another. Similar behavior is predicted for magnetic solitons -- localized spin textures that can be distinguished by their topological index $Q$. Theoretically, magnetic topological solitons with opposite values of $Q$, such as skyrmions and their antiparticles -- antiskyrmions -- are expected to be able to merge continuously and to annihilate. However, experimental verification of such particle-antiparticle pair production and annihilation processes has been lacking. Here, we report the creation and annihilation of skyrmion-antiskyrmion pairs in an exceptionally thin film of the cubic chiral magnet B20-type FeGe observed using transmission electron microscopy. Our observations are highly reproducible and are fully consistent with micromagnetic simulations. Our findings provide a new platform for fundamental studies of particles and antiparticles based on magnetic solids and open new perspectives for practical applications of thin films of isotropic chiral magnets. △ Less

Submitted 9 December, 2021; originally announced December 2021.

Comments: 16 pages, 14 figures

Journal ref: Nat. Phys. 18, 863 (2022)

Automatic alignment of an orbital angular momentum sorter in a transmission electron microscope using a convolution neural network

Authors: P. Rosi, A. Clausen, D. Weber, A. H. Tavabi, S. Frabboni, P. Tiemeijer, R. E. Dunin-Borkowski, E. Rotunno, V. Grillo

Abstract: We report on the automatic alignment of a transmission electron microscope equipped with an orbital angular momentum sorter using a convolutional neural network. The neural network is able to control all relevant parameters of both the electron-optical setup of the microscope and the external voltage source of the sorter without input from the user. It is able to compensate for mechanical and opti… ▽ More We report on the automatic alignment of a transmission electron microscope equipped with an orbital angular momentum sorter using a convolutional neural network. The neural network is able to control all relevant parameters of both the electron-optical setup of the microscope and the external voltage source of the sorter without input from the user. It is able to compensate for mechanical and optical misalignments of the sorter, in order to optimize its spectral resolution. The alignment is completed over a few frames and can be kept stable by making use of the fast fitting time of the neural network. △ Less

Submitted 7 April, 2022; v1 submitted 9 November, 2021; originally announced November 2021.

Symmetry and planar chirality of a protein measured on an angular basis in a transmission electron microscope

Authors: A. H. Tavabi, P. Rosi, R. B. G. Ravelli, A. Gijsbers, E. Rotunno, T. Guner, Y. Zhang, A. Rocaglia, L. Belsito, G. Pozzi, D. Tibeau, G. Gazzadi, M. Ghosh, S. Frabboni, P. J. Peters, E. Karimi, P. Tiemeijer, R. E. Dunin-Borkowski, V. Grillo

Abstract: In quantum mechanics, each conserved quantity (e.g., energy, position, linear momentum and angular momentum) is associated with a Hermitian operator. Its expected value can then be determined by performing a measurement on the wavefunction. In modern electron microscopy, one can select the initial and final states of the electron and the measurement basis by performing measurements of scattering p… ▽ More In quantum mechanics, each conserved quantity (e.g., energy, position, linear momentum and angular momentum) is associated with a Hermitian operator. Its expected value can then be determined by performing a measurement on the wavefunction. In modern electron microscopy, one can select the initial and final states of the electron and the measurement basis by performing measurements of scattering processes. For example, the orbital angular momentum (OAM) of an electron can be used to reveal the n-fold symmetry of a wavefunction scattered by a sample. Here, we introduce a new composite planar chirality operator that can be used to measure a spiral-like feature in a sample. This concept develops the concept of chirality to highlight a specific roto-scale symmetry. We show that planar chirality can be characterized using an electron OAM sorter to uncover the atomic structures of biomolecules in cryo electron microscopy, either in a stand-alone analysis for fast identification of protein structures or in the context of conventional cryo electron microscopy to produce faster and more detailed 3D reconstructions by solving upside-down orientation ambiguities. △ Less

Submitted 30 September, 2021; originally announced October 2021.

Theoretical and practical aspects of the design and production of synthetic holograms for transmission electron microscopy

Authors: Paolo Rosi, Federico Venturi, Giacomo Medici, Claudia Menozzi, Gian Carlo Gazzadi, Enzo Rotunno, Stefano Frabboni, Roberto Balboni, Mohammadreza Rezaee, Amir H. Tavabi, Rafal E. Dunin-Borkowski, Ebrahim Karimi, Vincenzo Grillo

Abstract: Beam shaping - the ability to engineer the phase and the amplitude of massive and massless particles - has long interested scientists working on communication, imaging and the foundations of quantum mechanics. In light optics, the shaping of electromagnetic waves (photons) can be achieved using techniques that include, but are not limited to, direct manipulation of the beam source (as in X-ray Fre… ▽ More Beam shaping - the ability to engineer the phase and the amplitude of massive and massless particles - has long interested scientists working on communication, imaging and the foundations of quantum mechanics. In light optics, the shaping of electromagnetic waves (photons) can be achieved using techniques that include, but are not limited to, direct manipulation of the beam source (as in X-ray Free Electron Lasers (XFELs) and Synchrotrons), deformable mirrors, spatial light modulators, mode converters and holograms. The recent introduction of holographic masks for electrons provides new possibilities for electron beam shaping. Their fabrication has been made possible by advances in micrometric and nanometric device production using lithography and focused ion beam patterning. This article provides a tutorial on the generation, production and analysis of synthetic holograms for transmission electron microscopy. It begins with an introduction to synthetic holograms, outlining why they are useful for beam shaping to study material properties. It then focuses on the fabrication of the required devices from theoretical and experimental perspectives, with examples taken from both simulations and experimental results. Applications of synthetic electron holograms as aberration correctors, electron vortex generators and spatial mode sorters are then presented. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Discovery and implications of hidden atomic-scale structure in a metallic meteorite

Authors: András Kovács, Laura H. Lewis, Dhanalaksmi Palanisamy, Thibaud Denneulin, Alexander Schwedt, Edward R. D. Scott, Baptiste Gault, Dierk Raabe, Rafal E. Dunin-Borkowski, Michalis Charilaou

Abstract: Iron and its alloys have made modern civilisation possible, with metallic meteorites providing one of the human's earliest sources of usable iron as well as providing a window into our solar system's billion-year history. Here highest-resolution tools reveal the existence of a previously hidden FeNi nanophase within the extremely slowly cooled metallic meteorite NWA 6259. This new nanophase exists… ▽ More Iron and its alloys have made modern civilisation possible, with metallic meteorites providing one of the human's earliest sources of usable iron as well as providing a window into our solar system's billion-year history. Here highest-resolution tools reveal the existence of a previously hidden FeNi nanophase within the extremely slowly cooled metallic meteorite NWA 6259. This new nanophase exists alongside Ni-poor and Ni-rich nanoprecipitates within a matrix of tetrataenite, the uniaxial, chemically ordered form of FeNi. The ferromagnetic nature of the nanoprecipitates combined with the antiferromagnetic character of the FeNi nanophases give rise to a complex magnetic state that evolves dramatically with temperature. These observations extend and possibly alter our understanding of celestial metallurgy, provide new knowledge concerning the archetypal Fe-Ni phase diagram and supply new information for the development of new types of sustainable, technologically critical high-energy magnets. △ Less

Submitted 16 July, 2021; originally announced July 2021.

Comments: 10 pages, 5 figures

Live processing of momentum-resolved STEM data for first moment imaging and ptychography

Authors: Achim Strauch, Dieter Weber, Alexander Clausen, Anastasiia Lesnichaia, Arya Bangun, Benjamin März, Feng Jiao Lyu, Qing Chen, Andreas Rosenauer, Rafal Dunin-Borkowski, Knut Müller-Caspary

Abstract: A reformulated implementation of single-sideband ptychography enables analysis and display of live detector data streams in 4D scanning transmission electron microscopy (STEM) using the LiberTEM open-source platform. This is combined with live first moment and further virtual STEM detector analysis. Processing of both real experimental and simulated data shows the characteristics of this method wh… ▽ More A reformulated implementation of single-sideband ptychography enables analysis and display of live detector data streams in 4D scanning transmission electron microscopy (STEM) using the LiberTEM open-source platform. This is combined with live first moment and further virtual STEM detector analysis. Processing of both real experimental and simulated data shows the characteristics of this method when data is processed progressively, as opposed to the usual offline processing of a complete dataset. In particular, the single side band method is compared to other techniques such as the enhanced ptychographic engine in order to ascertain its capability for structural imaging at increased specimen thickness. Qualitatively interpretable live results are obtained also if the sample is moved, or magnification is changed during the analysis. This allows live optimization of instrument as well as specimen parameters during the analysis. The methodology is especially expected to improve contrast- and dose-efficient in-situ imaging of weakly scattering specimens, where fast live feedback during the experiment is required. △ Less

Submitted 17 August, 2021; v1 submitted 25 June, 2021; originally announced June 2021.

Comments: 14 pages, 11 figures. Achim Strauch and Dieter Weber contributed equally to this work and share first-authorship. Corresponding Author: Achim Strauch

Journal ref: Microscopy and Microanalysis, 1-15 (2021)

Influence of surface band bending on a narrow band gap semiconductor: Tunneling atomic force studies of graphite with Bernal and rhombohedral stacking orders

Authors: Regina Ariskina, Michael Schnedler, Pablo D. Esquinazi, Ana Champi, Markus Stiller, Wolfram Hergert, R. E. Dunin-Borkowski, Philipp Ebert, Tom Venus, Irina Estrela-Lopis

Abstract: Tunneling atomic force microscopy (TUNA) was used at ambient conditions to measure the current-voltage ($I$-$V$) characteristics at clean surfaces of highly oriented graphite samples with Bernal and rhombohedral stacking orders. The characteristic curves measured on Bernal-stacked graphite surfaces can be understood with an ordinary self-consistent semiconductor modeling and quantum mechanical tun… ▽ More Tunneling atomic force microscopy (TUNA) was used at ambient conditions to measure the current-voltage ($I$-$V$) characteristics at clean surfaces of highly oriented graphite samples with Bernal and rhombohedral stacking orders. The characteristic curves measured on Bernal-stacked graphite surfaces can be understood with an ordinary self-consistent semiconductor modeling and quantum mechanical tunneling current derivations. We show that the absence of a voltage region without measurable current in the $I$-$V$ spectra is not a proof of the lack of an energy band gap. It can be induced by a surface band bending due to a finite contact potential between tip and sample surface. Taking this into account in the model, we succeed to obtain a quantitative agreement between simulated and measured tunnel spectra for band gaps $(12 \ldots 37)$\,meV, in agreement to those extracted from the exponential temperature decrease of the longitudinal resistance measured in graphite samples with Bernal stacking order. In contrast, the surface of relatively thick graphite samples with rhombohedral stacking reveals the existence of a maximum in the first derivative $dI/dV$, a behavior compatible with the existence of a flat band. The characteristics of this maximum are comparable to those obtained at low temperatures with similar techniques. △ Less

Submitted 5 April, 2021; originally announced April 2021.

Comments: 12 pages, 10 figures

Journal ref: Phys. Rev. Materials 5, 044601 (2021)

Magnetic skyrmion braids

Authors: Fengshan Zheng, Filipp N. Rybakov, Nikolai S. Kiselev, Dongsheng Song, András Kovács, Haifeng Du, Stefan Blügel, Rafal E. Dunin-Borkowski

Abstract: Filamentary textures can take the form of braided, rope-like superstructures in nonlinear media such as plasmas and superfluids. The formation of similar superstructures in solids has been predicted, for example from flux lines in superconductors. However, their observation has proved challenging. Here, we use electron microscopy and numerical methods to reveal braided superstructures of magnetic… ▽ More Filamentary textures can take the form of braided, rope-like superstructures in nonlinear media such as plasmas and superfluids. The formation of similar superstructures in solids has been predicted, for example from flux lines in superconductors. However, their observation has proved challenging. Here, we use electron microscopy and numerical methods to reveal braided superstructures of magnetic skyrmions in thin crystals of B20-type FeGe. Their discovery opens the door to applications of rich topological landscapes of geometric braids in magnetic solids. △ Less

Submitted 4 April, 2021; originally announced April 2021.

Comments: 6 pages, 3 figures

Journal ref: Nat. Commun. 12, 5316 (2021)

Highly Complex Magnetic Structures Resulting From Hierarchical Phase Separation in AlCo(Cr)FeNi High Entropy Alloys

Authors: Qianqian Lan, András Kovács, Jan Caron, Hongchu Du, Dongsheng Song, Sriswaroop Dasari, Bharat Gwalani, Varun Chaudhary, Raju V. Ramanujan, Rajarshi Banerjee, Rafal E. Dunin-Borkowski

Abstract: Magnetic high entropy alloys (HEAs) are a new category of high-performance magnetic materials, with multi-component concentrated compositions and complex multi-phase structures. Although there have been numerous reports of their interesting magnetic properties, there is very limited understanding about the interplay between their hierarchical multi-phase structures and their local magnetic structu… ▽ More Magnetic high entropy alloys (HEAs) are a new category of high-performance magnetic materials, with multi-component concentrated compositions and complex multi-phase structures. Although there have been numerous reports of their interesting magnetic properties, there is very limited understanding about the interplay between their hierarchical multi-phase structures and their local magnetic structures. By employing high spatial resolution correlative magnetic, structural and chemical studies, we reveal the influence of a hierarchically decomposed B2 + A2 structure in an AlCo0.5Cr0.5FeNi HEA on the formation of magnetic vortex states within individual A2 (disordered BCC) precipitates, which are distributed in an ordered B2 matrix that is weakly ferromagnetic. Non-magnetic or weakly ferromagnetic B2 precipitates in large magnetic domains of the A2 phase, and strongly magnetic Fe-Co-rich interphase A2 regions, are also observed. These results provide important insight into the origin of coercivity in this HEA, which can be attributed to a complex magnetization process that includes the successive reversal of magnetic vortices. △ Less

Submitted 2 April, 2021; originally announced April 2021.

Experimental Realisation of a π/2 Vortex Mode Converter for Electrons Using a Spherical Aberration Corrector

Authors: T. Schachinger, P. Hartel, P. -H. Lu, S. Löffler, M. Obermair, M. Dries, D. Gerthsen, R. E. Dunin-Borkowski, P. Schattschneider

Abstract: In light optics, beams with orbital angular momentum (OAM) can be produced by employing a properly-tuned two-cylinder-lens arrangement, also called $π$/2 mode converter. It is not possible to convey this concept directly to the beam in an electron microscope due to the non-existence of cylinder lenses in commercial transmission electron microscope (TEM). A viable work-around are readily-available… ▽ More In light optics, beams with orbital angular momentum (OAM) can be produced by employing a properly-tuned two-cylinder-lens arrangement, also called $π$/2 mode converter. It is not possible to convey this concept directly to the beam in an electron microscope due to the non-existence of cylinder lenses in commercial transmission electron microscope (TEM). A viable work-around are readily-available electron optical elements in the form of quadrupole lenses. In a proof-of-principle experiment in 2012, it has been shown that a single quadrupole in combination with a Hilbert phase plate produces a spatially-confined, transient vortex mode. Here, an analogue to an optical $π$/2 mode converter is realized by repurposing a CEOS DCOR probe corrector in an aberration corrected TEM in a way that it resembles a dual cylinder lens using two quadrupoles. In order to verify the presence of OAM in the output beam, a fork dislocation grating is used as an OAM analyser. The possibility to use magnetic quadrupole fields instead of, e.g., prefabricated fork dislocation gratings to produce electron beams carrying OAM enhances the beam brightness by almost an order of magnitude and delivers switchable high-mode purity vortex beams without unwanted side-bands. △ Less

Submitted 2 March, 2022; v1 submitted 19 March, 2021; originally announced March 2021.

Journal ref: Ultramicroscopy 229 (2021) 113340

Unveiling the three-dimensional spin texture of skyrmion tubes

Authors: Daniel Wolf, Sebastian Schneider, Ulrich K. Rößler, András Kovács, Marcus Schmidt, Rafal E. Dunin-Borkowski, Bernd Büchner, Bernd Rellinghaus, Axel Lubk

Abstract: Magnetic skyrmions are stable topological solitons with complex non-coplanar spin structures. Their nanoscopic size and the low electric currents required to initiate and control their motion has opened a new field of research, skyrmionics, that aims at using skyrmions as information carriers for data storage and manipulation. Recent advances in skyrmionics prompt for a thorough understanding of t… ▽ More Magnetic skyrmions are stable topological solitons with complex non-coplanar spin structures. Their nanoscopic size and the low electric currents required to initiate and control their motion has opened a new field of research, skyrmionics, that aims at using skyrmions as information carriers for data storage and manipulation. Recent advances in skyrmionics prompt for a thorough understanding of the detailed three-dimensional (3D) spin texture of a skyrmion including skyrmion-skyrmion interactions and their coupling to surfaces and interfaces. These properties crucially affect application-related aspects such as the stability and mobility of skyrmions in confined structures. To date, however, experimental techniques to measure the three-dimensional spin texture with nanometer resolution are largely missing. We therefore adapt holographic vector field electron tomography to the problem and report on the first quantitative reconstruction of the 3D spin texture of skyrmions with sub-10 nanometer resolution. The reconstructed textures reveal a variety of previously unseen local deviations from a homogeneous Bloch character within the skyrmion tubes (SkTs), details of the collapse of the skyrmion texture at surfaces, and a correlated modulation of the SkT in FeGe along their tube axes. The quantitative 3D data of the magnetic induction also allow to experimentally confirm some principles of skyrmion formation by deriving spatially resolved maps of the magnetic energy density across these magnetic solitons. △ Less

Submitted 29 January, 2021; originally announced January 2021.

Temperature dependence of magnetization processes in Sm(Co,Fe,Cu,Zr)$_z$ magnets with different nanoscale microstructures

Authors: Leonardo Pierobon, Robin E. Schäublin, András Kovács, Stephan S. A. Gerstl, Alexander Firlus, Urs V. Wyss, Rafal E. Dunin-Borkowski, Michalis Charilaou, Jörg F. Löffler

Abstract: The characteristic microstructure of Sm(Co,Fe,Cu,Zr)$_z$ alloys with SmCo$_5$ cell walls in Sm$_2$Co$_{17}$ cells, all intersected by Zr-rich platelets, makes them some of the best performing high-temperature permanent magnets. Plentiful research has been performed to tailor the microstructure at the nanoscale, but due to its complexity many questions remain unanswered about the effect of the indi… ▽ More The characteristic microstructure of Sm(Co,Fe,Cu,Zr)$_z$ alloys with SmCo$_5$ cell walls in Sm$_2$Co$_{17}$ cells, all intersected by Zr-rich platelets, makes them some of the best performing high-temperature permanent magnets. Plentiful research has been performed to tailor the microstructure at the nanoscale, but due to its complexity many questions remain unanswered about the effect of the individual phases on the magnetic performance at different temperatures. Here, we explore this mechanism effect for three different Sm(Co,Fe,Cu,Zr)$_z$ alloys by deploying high-resolution magnetic imaging via in-situ transmission electron microscopy and three-dimensional chemical analysis using atom probe tomography. We show that their microstructures differ in terms of SmCo$_5$ cell-wall and Z-phase size and density, as well as the Cu concentration in the cell walls, and demonstrate how these features influence the magnetic domain size and density and thus form different magnetic textures. Moreover, we illustrate that the dominant coercivity mechanism at room temperature is domain-wall pinning and show that magnets with a denser cell-wall network, a steeper Cu gradient across the cell-wall boundary, and thinner Z-phase platelets have a higher coercivity. We also show that the coercivity mechanism at high temperatures is domain-wall nucleation at the cell walls. Increasing the Cu concentration inside the cell walls decreases the transition temperature between pinning and nucleation, significantly decreasing the coercivity with increasing temperature. We therefore provide a detailed explanation of how the microstructure on the atomic to nanoscale directly affects the magnetic performance and provide detailed guidelines for an improved design of Sm(Co,Fe,Cu,Zr)$_z$ magnets. △ Less

Submitted 28 January, 2021; originally announced January 2021.

Comments: 14 pages, 9 figures

Alignment of electron optical beam shaping elements using a convolutional neural network

Authors: E. Rotunno, A. H. Tavabi, P. Rosi, S. Frabboni, P. Tiemeijer, R. E. Dunin-Borkowski, V. Grillo

Abstract: A convolutional neural network is used to align an orbital angular momentum sorter in a transmission electron microscope. The method is demonstrated using simulations and experimentally. As a result of its accuracy and speed, it offers the possibility of real-time tuning of other electron optical devices and electron beam shaping configurations. A convolutional neural network is used to align an orbital angular momentum sorter in a transmission electron microscope. The method is demonstrated using simulations and experimentally. As a result of its accuracy and speed, it offers the possibility of real-time tuning of other electron optical devices and electron beam shaping configurations. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Focused Ion Beam fabrication of Janus bimetallic cylinders acting as drift~tube Zernike phase plates

Authors: Paolo Rosi, Gian Carlo Gazzadi, Stefano Frabboni, Vincenzo Grillo, Amir H. Tavabi, Rafal E. Dunin-Borkowski, Giulio Pozzi

Abstract: Modern nanotechnology techniques offer new opportunities for fabricating structures and devices at the micron and sub-micron level. Here, we use focused ion beam techniques to realize drift tube Zernike phase plates for electrons, whose operation is based on the presence of contact potentials in Janus bimetallic cylinders, in a similar manner to the electrostatic Aharonov-Bohm effect in bimetallic… ▽ More Modern nanotechnology techniques offer new opportunities for fabricating structures and devices at the micron and sub-micron level. Here, we use focused ion beam techniques to realize drift tube Zernike phase plates for electrons, whose operation is based on the presence of contact potentials in Janus bimetallic cylinders, in a similar manner to the electrostatic Aharonov-Bohm effect in bimetallic wires. We use electron Fraunhofer interference to demonstrate that such bimetallic pillar structures introduce phase shifts that can be tuned to desired values by varying their dimensions, in particular their heights. △ Less

Submitted 26 November, 2020; originally announced November 2020.

Comments: 7 pages, 4 figures, preprint

Multiple polarization orders in individual twinned colloidal nanocrystals of centrosymmetric HfO2

Authors: Hongchu Du, Christoph Groh, Chun-Lin Jia, Thorsten Ohlerth, Knut W. Urban, Rafal E. Dunin-Borkowski, Ulrich Simon, Joachim Mayer

Abstract: Spontaneous polarization is essential for ferroelectric functionality in non-centrosymmetric crystals. High-integration-density ferroelectric devices require the stabilization of ferroelectric polarization in small volumes. Here, atomic-resolution transmission electron microscopy imaging reveals that twinning-induced symmetry breaking in colloidal nanocrystals of centrosymmetric HfO2 leads to the… ▽ More Spontaneous polarization is essential for ferroelectric functionality in non-centrosymmetric crystals. High-integration-density ferroelectric devices require the stabilization of ferroelectric polarization in small volumes. Here, atomic-resolution transmission electron microscopy imaging reveals that twinning-induced symmetry breaking in colloidal nanocrystals of centrosymmetric HfO2 leads to the formation of multiple polarization orders, which are associated with sub-nanometer ferroelectric and antiferroelectric phases. The minimum size limit of the ferroelectric phase is found to be ~4 nm3. Density functional theory calculations indicate that transformations between the ferroelectric and antiferroelectric phases can be modulated by lattice strain and are energetically possible in either direction. The results of this work provide a route towards applications of HfO2 nanocrystals in information storage at densities that are more than an order of magnitude higher than the scaling limit defined by the nanocrystal size. △ Less

Submitted 27 September, 2020; originally announced September 2020.

Next-Generation Information Technology Systems for Fast Detectors in Electron Microscop

Authors: Dieter Weber, Alexander Clausen, Rafal E. Dunin-Borkowski

Abstract: The Gatan K2 IS direct electron detector (Gatan Inc., 2018), which was introduced in 2014, marked a watershed moment in the development of cameras for transmission electron microscopy (TEM) (Pan & Czarnik, 2016). Its pixel frequency, i.e. the number of data points (pixels) recorded per second, was two orders of magnitude higher than the fastest cameras available only five years before. Starting fr… ▽ More The Gatan K2 IS direct electron detector (Gatan Inc., 2018), which was introduced in 2014, marked a watershed moment in the development of cameras for transmission electron microscopy (TEM) (Pan & Czarnik, 2016). Its pixel frequency, i.e. the number of data points (pixels) recorded per second, was two orders of magnitude higher than the fastest cameras available only five years before. Starting from 2009, the data rate of TEM cameras has outpaced the development of network, mass storage and memory bandwidth by almost two orders of magnitude. Consequently, solutions based on personal computers (PCs) that were adequate until then are no longer able to handle the resulting data rates. Instead, tailored high-performance setups are necessary. Similar developments have occurred for advanced X-ray sources such as the European XFEL, requiring special information technology (IT) systems for data handling (Sauter, Hattne, Grosse-Kunstleve, & Echols, 2013) (Fangohr, et al., 2018). Information and detector technology are currently under rapid development and involve disruptive technological innovations. This chapter briefly reviews the technological developments of the past 20 years, presents a snapshot of the current situation at the beginning of 2019 with many practical considerations, and looks forward to future developments. △ Less

Submitted 25 March, 2020; originally announced March 2020.

Journal ref: Handbook on Big Data and Machine Learning in the Physical Sciences, World Scientific, 2020, 83-120

Room temperature skyrmions at zero field in exchange-biased ultrathin films

Authors: K. Gaurav Rana, A. Finco, F. Fabre, S. Chouaieb, A. Haykal, L. D. Buda-Prejbeanu, O. Fruchart, S. Le Denmat, P. David, M. Belmeguenai, T. Denneulin, R. E. Dunin-Borkowski, G. Gaudin, V. Jacques, O. Boulle

Abstract: We demonstrate that magnetic skyrmions with a mean diameter around 60 nm can be stabilized at room temperature and zero external magnetic field in an exchange-biased Pt/Co/NiFe/IrMn multilayer stack. This is achieved through an advanced optimization of the multilayer stack composition in order to balance the different magnetic energies controlling the skyrmion size and stability. Magnetic imaging… ▽ More We demonstrate that magnetic skyrmions with a mean diameter around 60 nm can be stabilized at room temperature and zero external magnetic field in an exchange-biased Pt/Co/NiFe/IrMn multilayer stack. This is achieved through an advanced optimization of the multilayer stack composition in order to balance the different magnetic energies controlling the skyrmion size and stability. Magnetic imaging is performed both with magnetic force microscopy and scanning Nitrogen-Vacancy magnetometry, the latter providing unambiguous measurements at zero external magnetic field. In such samples, we show that exchange bias provides an immunity of the skyrmion spin texture to moderate external magnetic field, in the tens of mT range, which is an important feature for applications as memory devices. These results establish exchange-biased multilayer stacks as a promising platform towards the effective realization of memory and logic devices based on magnetic skyrmions. △ Less

Submitted 28 January, 2020; v1 submitted 3 January, 2020; originally announced January 2020.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Applied 13, 044079 (2020)

Experimental demonstration of an electrostatic orbital angular momentum sorter for electrons

Authors: Amir H. Tavabi, Paolo Rosi, Giulio Pozzi, Alberto Roncaglia, Stefano Frabboni, Enzo Rotunno, Peng-Han Lu, Robert Nijland, Peter Tiemeijer, Ebrahim Karimi, Rafal E. Dunin-Borkowski, Vincenzo Grillo

Abstract: We report the first experimental demonstration of an electrostatic electron orbital angular momentum (OAM) sorter, which can be used to analyze the OAM states of electrons in a transmission electron microscope. We verify the sorter functionality for several electron beams possessing different superpositions of OAM states, and use it to record the electron beams OAM spectra. Our current electrostat… ▽ More We report the first experimental demonstration of an electrostatic electron orbital angular momentum (OAM) sorter, which can be used to analyze the OAM states of electrons in a transmission electron microscope. We verify the sorter functionality for several electron beams possessing different superpositions of OAM states, and use it to record the electron beams OAM spectra. Our current electrostatic OAM sorter has an OAM resolution of 2 in the units of h/bar - the reduced Planck constant. It is expected to increase the OAM resolution of the sorter to the optimal resolution of 1 in the future via fine control of the sorting phase elements. △ Less

Submitted 8 October, 2019; originally announced October 2019.

Journal ref: Phys. Rev. Lett. 126, 094802 (2021)

High-resistance YBa2Cu3O7-x grain-boundary Josephson junctions fabricated by electromigration

Authors: M. Lyatti, U. Poppe, I. Gundareva, R. E. Dunin-Borkowski

Abstract: [100]-tilt grain-boundary YBa2Cu3O7-x (YBCO) junctions are promising for investigation of macroscopic quantum phenomena in high-Tc Josephson junctions. However, fabrication of the [100]-tilt grain-boundary YBCO junctions with a high resistance, which are required to study quantum effects, is difficult because of a high transparency of a tunnel barrier in this type of junctions. Here, we demonstrat… ▽ More [100]-tilt grain-boundary YBa2Cu3O7-x (YBCO) junctions are promising for investigation of macroscopic quantum phenomena in high-Tc Josephson junctions. However, fabrication of the [100]-tilt grain-boundary YBCO junctions with a high resistance, which are required to study quantum effects, is difficult because of a high transparency of a tunnel barrier in this type of junctions. Here, we demonstrate a modification of grain-boundary barrier properties with a new approach to an oxygen electromigration in the YBCO grain-boundary junctions when the oxygen diffuses under an applied electric field from the grain-boundary to a BaTbO3 layer deposited atop of an YBCO film. Using this approach, we changed the normal-state resistance of the junctions from tens to several hundred Ohms without a degradation of their characteristic voltage IcRn and determined a barrier height and thickness by measuring the quasiparticle tunnelling current. △ Less

Submitted 10 August, 2019; originally announced August 2019.

Design of electrostatic phase elements for sorting the orbital angular momentum of electrons

Authors: Giulio Pozzi, Vincenzo Grillo, Peng-Han Lu, Amir H. Tavabi, Ebrahim Karimi, Rafal E. Dunin-Borkowski

Abstract: The orbital angular momentum (OAM) sorter is a new electron optical device for measuring an electron s OAM. It is based on two phase elements, which are referred to as the unwrapper and corrector and are placed in Fourier conjugate planes in an electron microscope. The most convenient implementation of this concept is based on the use of electrostatic phase elements, such as a charged needle as th… ▽ More The orbital angular momentum (OAM) sorter is a new electron optical device for measuring an electron s OAM. It is based on two phase elements, which are referred to as the unwrapper and corrector and are placed in Fourier conjugate planes in an electron microscope. The most convenient implementation of this concept is based on the use of electrostatic phase elements, such as a charged needle as the unwrapper and a set of electrodes with alternating charges as the corrector. Here, we use simulations to assess the role of imperfections in such a device, in comparison to an ideal sorter. We show that the finite length of the needle and the boundary conditions introduce astigmatism, which leads to detrimental cross-talk in the OAM spectrum. We demonstrate that an improved setup comprising three charged needles can be used to compensate for this aberration, allowing measurements with a level of cross-talk in the OAM spectrum that is comparable to the ideal case. △ Less

Submitted 5 June, 2019; originally announced June 2019.

Energy-level quantization in YBa2Cu3O7-x phase-slip nanowires

Authors: M. Lyatti, M. A. Wolff, I. Gundareva, M. Kruth, S. Ferrari, R. E. Dunin-Borkowski, C. Schuck

Abstract: Significant progress has been made in the development of superconducting quantum circuits, however new quantum devices that have longer decoherence times at higher temperatures are urgently required for quantum technologies. Superconducting nanowires with quantum phase slips are promising candidates for use in novel devices that operate on quantum principles. Here, we demonstrate ultra-thin YBa2Cu… ▽ More Significant progress has been made in the development of superconducting quantum circuits, however new quantum devices that have longer decoherence times at higher temperatures are urgently required for quantum technologies. Superconducting nanowires with quantum phase slips are promising candidates for use in novel devices that operate on quantum principles. Here, we demonstrate ultra-thin YBa2Cu3O7-x nanowires with phase-slip dynamics and study their switching-current statistics at temperatures below 20 K. We apply theoretical models that were developed for Josephson junctions and show that our results provide strong evidence for energy-level quantization in the nanowires. The crossover temperature to the quantum regime is 12-13 K, while the lifetime in the excited state exceeds 20 ms at 5.4 K. Both values are at least one order of magnitude higher than those in conventional Josephson junctions based on low-temperature superconductors. We also show how the absorption of a single photon changes the phase-slip and quantum state of a nanowire, which is important for the development of single-photon detectors with high operating temperature and superior temporal resolution. Our findings pave the way for a new class of superconducting nanowire devices for quantum sensing and computing. △ Less

Submitted 11 April, 2019; v1 submitted 2 March, 2019; originally announced March 2019.

Journal ref: Nature Communications 11, 763 (2020)

Unconventional magnetization textures and domain-wall pinning in Sm-Co magnets

Authors: Leonardo Pierobon, András Kovács, Robin E. Schäublin, S. S. A. Gerstl, J. Caron, Urs Wyss, Rafal E. Dunin-Borkowski, Jörg F. Löffler, Michalis Charilaou

Abstract: The most powerful magnets for high temperature applications are Sm-Co-based alloys with a microstructure that combines magnetically soft and hard regions. The microstructure consists of a dense domain-wall-pinning network that endows the material with remarkable magnetic hardness. A precise understanding of the coupling between magnetism and microstructure is essential for enhancing the performanc… ▽ More The most powerful magnets for high temperature applications are Sm-Co-based alloys with a microstructure that combines magnetically soft and hard regions. The microstructure consists of a dense domain-wall-pinning network that endows the material with remarkable magnetic hardness. A precise understanding of the coupling between magnetism and microstructure is essential for enhancing the performance of Sm-Co magnets, but experiments and theory have not yet converged to a unified model. Here, we combine transmission electron microscopy, atom probe tomography, and nanometer-resolution off-axis electron holography with micromagnetic simulations to show that the magnetization processes in Sm-Co magnets result from an interplay between curling instabilities and pinning effects at the intersections between magnetically soft and hard regions. We also find that topologically non-trivial magnetic domains separated by a complex network of domain walls play a key role in the magnetic state. Our findings reveal a previously hidden aspect of magnetism and provide insight into the full potential of high-performance magnetic materials. △ Less

Submitted 14 October, 2019; v1 submitted 7 January, 2019; originally announced January 2019.

Structured Quantum Projectiles

Authors: Hugo Larocque, Robert Fickler, Eliahu Cohen, Vincenzo Grillo, Rafal E. Dunin-Borkowski, Gerd Leuchs, Ebrahim Karimi

Abstract: Matter wave interferometry is becoming an increasingly important technique in quantum metrology. However, unlike its photonic counterpart, this technique relies on the interference of particles possessing a non-zero rest mass and an electric charge. Matter waves, thus, can experience alterations in their wave-like features while propagating through uniform fields to which a linear potential can be… ▽ More Matter wave interferometry is becoming an increasingly important technique in quantum metrology. However, unlike its photonic counterpart, this technique relies on the interference of particles possessing a non-zero rest mass and an electric charge. Matter waves, thus, can experience alterations in their wave-like features while propagating through uniform fields to which a linear potential can be attributed. Here, we derive analytical expressions for structured matter waves subjected to linear potentials. We show that the center of mass of corresponding to these wavefunctions follows the classical parabolic trajectory attributed to this potential and also provide the additional phase profile acquired by the wave upon propagation. Furthermore, we find that these features are identical for any structured wave, thus significantly simplifying the action of quantum effects pertaining to this potential in applications relying on structured quantum waves. △ Less

Submitted 24 September, 2018; originally announced September 2018.

Comments: 11 pages, 6 figures

Journal ref: Phys. Rev. A 99, 023628 (2019)

Generation of electron vortices using non-exact electric fields

Authors: Amir H. Tavabi, Hugo Larocque, Peng-Han Lu, Martial Duchamp, Vincenzo Grillo, Ebrahim Karimi, Rafal E. Dunin-Borkowski, Giulio Pozzi

Abstract: Vortices in electron beams can manifest several types of topological phenomena, such as the formation of exotic structures or interactions with topologically structured electromagnetic fields. For instance, the wavefunction of an electron beam can acquire a phase vortex upon propagating through a magnetic monopole, which, in practice, provides a convenient method for generating electron vortex bea… ▽ More Vortices in electron beams can manifest several types of topological phenomena, such as the formation of exotic structures or interactions with topologically structured electromagnetic fields. For instance, the wavefunction of an electron beam can acquire a phase vortex upon propagating through a magnetic monopole, which, in practice, provides a convenient method for generating electron vortex beams. Here, we show how an electric field must be structured in order to achieve a similar effect. We find that, much as in the case of magnetic fields, closed but not exact electric fields can produce electron vortex beams. We proceed by fabricating a versatile near-obstruction-free device that is designed to approximately produce such fields and we systematically study their influence on incoming electron beams. With such a single device, electron vortex beams that are defined by a wide range of topological charges can be produced by means of a slight variation of an applied voltage. For this reason, this device is expected to be important in applications that rely on the sequential generation and manipulation of different types of electron vortices. △ Less

Submitted 20 September, 2018; originally announced September 2018.

Comments: 5 pages, 3 figures!

Journal ref: Phys. Rev. Research 2, 013185 (2020)