JOURNAL OF CLINICAL MICROBIOLOGY, Jan. 1996, p. 134–139
0095-1137/96/$04.0010
Copyright q 1996, American Society for Microbiology
Vol. 34, No. 1
Evaluation of Roche Amplicor PCR Assay for
Mycobacterium tuberculosis
WENDY L. WOBESER,1,2 MEL KRAJDEN,1,2 JOHN CONLY,1,2 HELEN SIMPSON,2 BIANCHE YIM,3
MARIO D’COSTA,1,3 MILAN FUKSA,3 CLENCY HIAN-CHEONG,3 MAX PATTERSON,1,3
ANNE PHILLIPS,1,2 ROBERT BANNATYNE,1,4 ALBERT HADDAD,5
JAMES L. BRUNTON,1,2 AND SIGMUND KRAJDEN1,3*
University of Toronto,1 Departments of Microbiology, The Toronto Hospital,2 St. Michael’s Hospital,4
St. Joseph’s Health Center,3 and Laboratory Services Branch,
Ministry of Health,5 Toronto, Ontario, Canada
Received 10 July 1995/Returned for modification 18 August 1995/Accepted 27 October 1995
The Roche Amplicor Mycobacterium tuberculosis PCR test (RMtb-PCR) was compared with mycobacterial
culture, with the BACTEC 460 system and inoculation on Lowenstein-Jensen media. Results were interpreted
with an adjusted ‘‘gold standard’’ incorporating clinical diagnosis. A total of 1,480 clinical specimens from
1,155 patients, including tissues and fluids, as well as 141 specimens which demonstrated a positive growth
index on the BACTEC 460 system were assessed. The sensitivity, specificity, and positive and negative predictive values of RMtb-PCR compared with the adjusted gold standard for clinical specimens were 79, 99, 93, and
98%, respectively. In smear-positive specimens, the sensitivity of RMtb-PCR was 98% versus 53% for smearnegative specimens. When RMtb-PCR was performed two times per week, PCR results were available an
average of 21 days before the culture results. For specimens demonstrating a positive growth index on the
BACTEC 460 system, RMtb-PCR had a sensitivity and specificity of 98 and 100%, respectively. This study
demonstrates the value of a commercial nucleic acid amplification kit for rapid diagnosis of M. tuberculosis,
particularly in smear-positive specimens or BACTEC culture-positive specimens.
acids. However, concerns about the sensitivity, specificity, and
reproducibility of in-house PCR assays which are poorly standardized between centers (21) have slowed the endorsement of
this technology by regulatory bodies (6).
Given these concerns, we designed a laboratory-based prospective study with the objective of assessing the sensitivity,
specificity, positive predictive value (PPV), and negative predictive value (NPV) of a commercial nucleic acid amplification
kit, the Amplicor M. tuberculosis test (RMtb-PCR).
The importance of tuberculosis as a global public health
concern has been emphasized by high incidence rates (particularly in human immunodeficiency virus [HIV]-positive individuals, the homeless, and prisoners) and by recent outbreaks
of multidrug-resistant tuberculosis in the United States (3, 7,
13). Factors contributing to the outbreaks have included delays
in the diagnosis and implementation of proper infection control measures, as well as delays in the institution of appropriate
chemotherapy (5). Mycobacterium tuberculosis is easily spread
by aerosols, and it is generally recommended that hospitalized
patients whose respiratory specimens are smear positive for
acid-fast bacilli should be kept in respiratory isolation for 2
weeks until treated. This may be costly, inconvenient, and
inappropriate if the isolate is confirmed to be a Mycobacterium
sp. other than M. tuberculosis (MOTT). Conventional diagnosis of M. tuberculosis by culture generally takes 3 to 8 weeks.
Acid-fast smears lack sensitivity (22) and cannot distinguish M.
tuberculosis from other mycobacteria. Rapid differentiation of
M. tuberculosis from other mycobacterial species is therefore of
great potential benefit.
The PCR can provide a rapid and specific identification of
M. tuberculosis complex organisms. Since 1990, more than 25
studies have been published about the detection of M. tuberculosis by this method. These studies have employed a number of different genetic elements for amplification (including
IS6110 [9, 12, 15], the 65-kDa antigen [4, 26], and the 38-kDa
antigen [14, 24]) and have utilized a number of different DNA
extraction, amplification, and detection methodologies. These
studies have demonstrated that PCR is a powerful tool for the
amplification and detection of mycobacterium-specific nucleic
MATERIALS AND METHODS
Clinical specimens. During the 1-year study period, a total of 1,480 specimens
from 1,155 patients were processed for mycobacteria. Clinical specimens were
submitted to the Mycobacteriology Laboratory of The Toronto Hospital from a
consortium of tertiary care and community-based hospitals. Specimens were
transported to the laboratory within 2 days of collection and were stored at 48C
until processed. Specimens from contaminated sites (bronchoalveolar lavage
[BAL], sputa, tissues, fluids other than cerebrospinal fluid [CSF]) were digested
and decontaminated with a final concentration of 2.5% NaOH and N-acetyl-Lcysteine and concentrated by centrifugation at 3,500 3 g for 15 min (19). Tissues
were homogenized by either the Stomacher Lab-Blender 80 (Seward Medical
UAV House, London, United Kingdom) or by a sterile disposable tissue grinder
(Sage Products, Inc., Crystal Lake, Ill.) on the basis of tissue size prior to
decontamination and concentration. CSF samples were processed without prior
decontamination (see ‘‘DNA preparation’’). After concentration, a residual volume of 2 to 3 ml remained. One milliliter was aliquoted for PCR testing and
stored at 48C; 0.5 ml was inoculated into a BACTEC 12B bottle, which was
incubated at 378C. The growth indices of the 12B bottles were assessed with a
BACTEC 460 instrument (Becton Dickinson, Cockeysville, Md.) twice weekly
for the first 2 weeks and weekly thereafter for up to 6 weeks. Another 0.5 ml was
inoculated onto a Lowenstein-Jensen (Difco laboratories, Detroit, Mich.) slope,
which was incubated in 5% CO2 at 378C. Slopes were inspected weekly for up to
8 weeks. Smears were stained with auramine-rhodamine and examined under
3400 power with a Leitz epifluorescence microscope (19). Smears were considered positive if at least one fluorescent bacillus was visualized. All positive smears
were confirmed by restaining with a modified Kinyoun stain (8) and independently verified by at least two technologists. Specimens from one contributing
hospital were divided before decontamination, concentration, and PCR (see
Discussion). Culture-positive specimens were identified by the Ontario Provincial Health Laboratory by nucleic acid hybridization testing (Accuprobe; Gen
* Corresponding author. Mailing address: Department of Microbiology, St. Joseph’s Health Center, 30 The Queensway, Toronto, Ontario, Canada M6R 1B5. Phone: (416) 530-6268. Fax: (416) 530-6590.
134
VOL. 34, 1996
ROCHE AMPLICOR PCR ASSAY FOR M. TUBERCULOSIS
TABLE 1. Species distribution and smear results for
cultures growing mycobacteria
All clinical specimens
Sputum or BAL
Species
No. of
specimens
No. (%) smear
positive
No. of
specimens
No. (%) smear
positive
M. tuberculosis
MAC
M. xenopi
M. fortuitum
M. chelonae
M. gordonae
M. kansasii
M. szulgae
Other MOTT
100
57
43
7
1
1
2
1
6
56 (56)
17 (30)
4 (9)
0
0
0
2 (100)
1 (100)
1 (17)
59
51
43
7
1
1
2
1
5
40 (68)
15 (29)
4 (9)
0
0
0
2 (100)
1 (100)
1 (20)
All
218
81 (37)a
170
63 (37)b
a
b
Fifty-six of 81 specimens (69%) grew M. tuberculosis.
Forty of 63 specimens (63%) grew M. tuberculosis.
Probe, Inc., San Diego, Calif.) and conventional biochemical testing (19). There
were 630 sputa, 445 BALs, 236 biopsies, 90 normally sterile fluids, 52 aspirates,
22 CSF samples, 4 urine samples, and 1 blood sample. In addition, 141 specimens
whose growth indices exceeded 10 in BACTEC bottles were processed for RMtbPCR.
DNA preparation, amplification, and detection by RMtb-PCR. PCR was performed according to the manufacturer’s instructions with the RMtb-PCR (Roche
PCR Diagnostics, Inc., Branchburg, N.J.). DNA preparation was performed in a
laminar air flow biosafety hood in an area separated from the specimen processing area. A volume of 100 ml of each specimen (or the vortexed, unconcentrated
BACTEC 12B contents) was used for each amplification. Specimens were
washed, lysed, and neutralized according to the manufacturer’s protocol. CSF
specimens were run in duplicate, with one receiving the normal wash treatment
and the other not receiving the wash as a precaution against insufficient precipitation of nucleic acids after the wash step. One positive control and two negative
controls supplied by Roche were included in every run. Amplification reagents
were prepared on the day of utilization. False-positive results due to amplicon
contamination were minimized through the use of uracil-N-glycosylase (AmpErase). A 35-cycle procedure was used with a GeneAmp PCR system 9600
(Perkin Elmer): 20 s at 948C, 20 s at 628C, and 45 s at 728C. The final elongation
step was continued for 5 min at 728C, and the product was held at 728C. PCR
product detection was performed on the same day as amplification. Amplification products and hybridization buffer were transferred to microwell plates
coated with oligonucleotides specific for M. tuberculosis complex. After incubation at 378C for 1.5 h, the plates were washed five times. Avidin-horseradish
peroxidase conjugate and substrate were added. Samples were considered positive if the A450 was equal to or greater than 0.35.
Discrepant result analysis. RMtb-PCR was repeated when possible on specimens which were RMtb-PCR negative and culture positive for M. tuberculosis.
The medical records of all patients who had positive RMtb-PCR and negative
culture results were reviewed by the investigators. Data concerning the clinical
presentation, epidemiologic risk factors, past culture results, and previous or
current therapy were analyzed. Additional specimens were examined if available.
After this analysis, the PCR result was reclassified as appropriate. The combination of culture and clinical data was utilized to generate an adjusted gold
standard.
Statistical methods. Data were entered into a Epi-Info 6.00 database (Centers
for Disease Control and Prevention, Atlanta, Ga.). Continuous variables were
compared by Student’s t test. Sensitivities were compared by McNemar’s chisquare test.
xenopi is one of the most common MOTT found in Ontario,
Canada [23]). When only respiratory specimens are considered
(sputum and BAL), 40 of 59 (68%) of the specimens growing
M. tuberculosis were positive by smear, as were 15 of 51 (29%)
of the MAC isolates and 4 of 43 (9%) of the M. xenopi isolates.
Of all smear-positive respiratory specimens, 40 of 63 (63%)
grew M. tuberculosis. A total of eight smear-positive respiratory
specimens failed to grow mycobacteria, two of which were
positive by RMtb-PCR.
Comparison of smear, culture, and PCR results. Table 2
demonstrates the relationship between culture, smear, and
RMtb-PCR results excluding BACTEC-cultivated specimens.
M. tuberculosis was cultivated in 77 specimens which were
also positive by RMtb-PCR. M. tuberculosis was not cultivated
in 1,362 specimens that were also negative by RMtb-PCR. A
total of 23 specimens were M. tuberculosis positive only by
culture, and 18 were positive only by RMtb-PCR. The smear
positivity rate was 55 of 77 specimens (71%) in culture-positive
specimens which were also RMtb-PCR positive, whereas in
specimens which were culture positive and RMtb-PCR negative, the smear positivity rate was only 4%. Details of the
discordant results are given in Tables 4 and 5 (see below).
The overall sensitivity of RMtb-PCR for specimens which
were M. tuberculosis culture positive was 77%, whereas the
sensitivity for smear was 56%. With McNemar’s chi-square
test, the difference is significant at P , 0.01. The PPVs and
NPVs of RMtb-PCR versus culture were 77 and 98%, respectively.
Of all 56 specimens that were smear and culture positive for
M. tuberculosis, all but 1 (98%) was also positive by RMtbPCR. Of the 44 specimens negative by smear and positive by
culture for M. tuberculosis, 22 (50%) were positive by RMtbPCR. For respiratory specimens, 40 were positive by smear and
culture for M. tuberculosis, and all were positive by RMtb-PCR.
Of the 19 respiratory specimens which were smear negative
and culture positive, 9 of 19 were also RMtb-PCR positive
(47%). RMtb-PCR was repeated for 6 of the 10 false-negative
specimens, but in only one case was the repeated result positive.
The distribution of culture-positive specimens by RMtbPCR result is given in Table 3. The sensitivities of RMtb-PCR
for sputum and BAL were comparable (84 and 81%, respectively). The sensitivity of RMtb-PCR for biopsy specimens was
74% (this difference was not significant). The numbers of M.
tuberculosis culture-positive aspirates, fluids, and CSFs were
too few to draw specific conclusions regarding the comparative
performance of RMtb-PCR (Table 3).
TABLE 2. Detection of M. tuberculosis by RMtb-PCR
versus culture in 1,480 clinical specimensa
Culture result
(no. of specimens)
RESULTS
Species distribution and smear results. A total of 1,480
specimens were processed from 1,155 patients for both culture
and RMtb-PCR. Mycobacterial species were grown from 218
of 1,480 specimens (15%), of which 100 of 218 specimens
(46%) grew M. tuberculosis. Culture and smear results for the
identified mycobacterium species are shown in Table 1. Over
half, 56 of 100 (56%), of the specimens which grew M. tuberculosis were positive by smear. Among specimens positive for
MOTT, 57 of 118 (48%) grew Mycobacterium avium complex
(MAC) and 43 of 118 (36%) grew Mycobacterium xenopi (M.
135
No. of RMtb-PCR-tested
specimens (% smear positive)
Positive
Positive for M. tuberculosis (100)
Negative for M. tuberculosis (1,380)
77 (71)
18d
Total
95
b
Negative
23c (4)b
1,362e
1,385
a
A total of 1,155 patients provided specimens. Note that BACTEC specimens
were excluded.
b
71% 5 55 of 77 and 4% 5 1 of 23. Overall, 56% (56 of 100) of the
culture-positive specimens were smear positive.
c
Details are given in Table 4.
d
Details are given in Table 5 (includes five MOTT).
e
Includes 113 MOTT.
136
WOBESER ET AL.
J. CLIN. MICROBIOL.
TABLE 3. Distribution of specimens which were culture
positive for M. tuberculosis
No. of samples from:
PCR
result
Sputum
BAL
Aspirate
Biopsy
Fluid
CSF
Positive
Negative
36
7
13
3
4
3
20
7
2
1
2
2
Total
43
16
7
27
3
4
Analysis of discordant results with the adjusted gold standard. Discordance between different detection assays may be
related to the assay design or its performance characteristics.
For example, DNA amplification techniques may detect nucleic acid from both viable and nonviable organisms. Therefore, patients receiving therapy may have a positive PCR result
despite being culture negative. To address this possibility, we
incorporated an adjusted gold standard which included clinical
and treatment data.
(i) Culture-positive, RMtb-PCR-negative specimens. Table
4 gives a detailed analysis of the 24 specimens from 22 patients
which were positive by culture for M. tuberculosis and negative
by RMtb-PCR. The single false-negative RMtb-PCR specimen
which was smear positive was on a peritoneal dialysate which
had not been concentrated. After concentration of this sample,
the RMtb-PCR was positive. The first culture-positive CSF we
tested was RMtb-PCR negative after washing as per the manufacturer’s directions. Because of concerns that the washing
step could have resulted in the loss of amplifiable target, we
split subsequent CSFs into washed and unwashed specimens
prior to performance of RMtb-PCR. An additional two CSFs
were both culture and RMtb-PCR positive—one in both the
washed and unwashed specimens and one in only the washed
specimen. (One CSF was only positive by RMtb-PCR but was
negative on culture. This patient was undergoing treatment
[Table 5].) An additional three specimens (one of each biopsy,
BACTEC and sputum) were positive on repeat RMtb-PCR, 10
were negative on repeat RMtb-PCR, and 8 were not repeated
because of a lack of sufficient specimen. Specimens divided
prior to concentration and homogenization (from one hospital
site) did not differ from other specimens in the rate of smear,
culture, or RMtb-PCR positivity.
(ii) Culture-negative, RMtb-PCR-positive specimens. A total of 18 specimens from 16 patients were initially classified as
RMtb-PCR false positive with culture as the gold standard
(Table 5). However, after review, 11 of 18 specimens (nine
patients) were reclassified as true positives, 6 specimens remained as false positives (1 because of laboratory contamination), and 1 specimen was indeterminate. Six of the 16 patients
(eight specimens) were undergoing treatment at the time the
specimen was obtained (treatment duration ranging from 2 to
130 weeks). The patient who had been on treatment for 130
weeks was HIV positive, known to be noncompliant, and had
severe disease, as shown by a chest radiograph. We concluded
that all six of these patients were true positives. One patient
classified as true positive had been treated for tuberculosis 1
year earlier and had a persistent cavitary lesion. At a 1-year
follow-up, without treatment, this patient remained asymptomatic and showed almost complete resolution of the radiological
abnormality. Three other patients were started on antituberculous therapy after the RMtb-PCR result, two of three having
clinical and histopathological evidence of tuberculosis. One of
three patients was from an area endemic for tuberculosis and
had bilateral lower lobe pneumonia, which on pathology dem-
onstrated bronchiolitis obliterans and organizing pneumonia.
This patient was started on steroids in addition to antituberculous therapy, with a partial clinical response. We classified
the two former patients as true positives; the third patient was
classified as indeterminate.
Four patients grew M. xenopi, all from respiratory specimens. One of the four had severe cavitary disease, multiple
positive cultures, and was on therapy; the three remaining had
no significant pulmonary disease (one had recently been
treated with intravesicular Mycobacterium bovis BCG for bladder carcinoma). One other patient with chronic lung disease
presumed to be due to MAC and on therapy against MAC was
positive by RMtb-PCR on two occasions. One patient (postliver transplant) with no evidence of tuberculosis was PCR
positive, likely as a result of laboratory contamination.
Table 6 summarizes the performance of RMtb-PCR versus
culture and the adjusted gold standard. With the adjusted gold
standard, the overall sensitivity in clinical specimens was 79%
and the specificity was 99%. The PPV was 93%, and the NPV
was 98% (Table 6). For smear-positive specimens, the sensitivity was unchanged at 98%, and the sensitivity for smearnegative samples rose to 53%. The sensitivity and specificity of
RMtb-PCR with the adjusted gold standard for respiratory
specimens were 84% and 99%, respectively.
BACTEC specimens. A total of 141 BACTEC specimens
with positive growth indices were processed for RMtb-PCR.
The average growth index (at the time RMtb-PCR was performed) was 299 (range, 10 to 999). M. tuberculosis was cultured from 50 specimens (35%), MAC was cultured from 49
specimens (34%), and M. xenopi was cultured from 35 speci-
TABLE 4. Analysis of 24 specimens from 22 patient culture
positive for M. tuberculosis and negative by RMtb-PCRa
Patient
Specimen
Result by:
Smear
1
2
3
4
5
6
7
8
9e
10
11
12
BAL
Biopsy
CSF
BAL
Biopsy
Biopsy
Biopsy
Fluid
Sputum
Biopsy
Biopsy
BAL
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Negative
Negative
13
14
15
16
17
18
BACTEC
Sputum
Sputum
Biopsy
CSF
Fluid
Negative
Negative
Negative
Negative
Negative
Positive
19
20
21e
22
Sputum
Sputum
Aspirate
Sputum
a
Comment(s)
Repeatb
NSQc
NSQ
Positive (wash)d
Negative
Negative
NSQ
Negative
NSQ
Negative
Positive
NSQ
Negative
Lymph node
BAL RMtb-PCR positive
Lymph node
Lymph node
Pleural
Neck abscess
Lymph node
Lymph node
Culture negative twice on
the same BAL
Lymph node
Positive
Positive
Negative
NSQ
Lymph node
Negative (wash)d
Positive (concn) Peritoneal dialysate, unconcentrated specimen was
PCR negative
Negative NSQ
Negative NSQ
Negative Negative
Positive Negative
RMtb-PCR run on small
volume (less than 100 ml)
Not tested for the presence of inhibitors.
Result of repeat PCR.
c
NSQ, insufficient quantity for repeat testing.
d
CSF specimens were run in duplicate (see Methods).
e
Patients with two distinct specimens.
b
VOL. 34, 1996
ROCHE AMPLICOR PCR ASSAY FOR M. TUBERCULOSIS
137
TABLE 5. Analysis of 18 specimens from 16 patient cultures negative for M. tuberculosis and positive by RMtb-PCR
Reclassification
Patient
Previous
TBa
Clinical
TB
Specimen
Contamination
True positive
True positive
True positive
True positive
True positive
True positive
True positive
True positive
True positive
False positive
False positive
False positive
False positive
False positive
Indeterminate
1
2c
3c
4
5
6
7
8
9
10
11
12
13
14
15
16
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
No
?
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
?
No
No
Sputum
Sputum
Sputum
Biopsy
Biopsy
Biopsy
CSF
Aspirate
Biopsy
BAL
Sputum
Sputum
BAL
Sputum
Sputum
Biopsy
Result by:
Smear
Repeat PCR
Negative
Positive
Positive
Negative
Positive
Positive
Negative
Positive
Negative
Negative
Positive
Negative
Negative
Negative
Positive
Negative
NSQb
NSQ
NSQ
NSQ
NSQ
NSQ
NSQ
NSQ
NSQ
NSQ
Yes/negative
NSQ
NSQ
Yes/negative
Yes/positive
NSQ
Comment(s)
No evidence of M. tuberculosis, Liver Transplant
On treatment for 6 wk, also grew M. xenopi
On treatment for 130 wk, noncompliant, HIV positive
On treatment for 20 wk, severe lung disease, new lymph node
On treatment for 26 wk, active pericarditis at surgery
On treatment for 26 wk, persistent lymph node drainage
On treatment for 2 wk for meningitis
Treated for TB, apical pneumonia, AFBd positive on pathology
Treated for TB, lymph node AFB positive on pathology
Previously treated for M. tuberculosis 1 year ago, persistent cavity
Cavitary lung disease, multiple cultures positive for M. xenopi only
Not treated for MTB, lung nodule, 2 specimens positive for M. xenopi
Recent treatment with BCG, granuloma on X ray, grew M. xenopi
Clinical data unavailable, M. xenopi
Chronic lung disease with MAC, on steroids, anti-MAC treatment
Treated for M. tuberculosis, bilateral lower lobe pneumonia, BOOPe
a
TB, tuberculosis.
NSQ, insufficient quantity of sample for retesting.
Patients 2 and 3 each had separate specimens positive by RMtb-PCR and negative by Culture.
d
AFB, acid-fast bacillus.
e
BOOP, Bronchiolitis obliterans and organizing pneumonia.
b
c
mens (24%). Two each grew Mycobacterium chelonae and Mycobacterium gordonae, and one grew Mycobacterium kansasii.
Two grew MOTT which were not identified to the species
level. Of those growing M. tuberculosis, 49 of 50 were positive
by RMtb-PCR for a sensitivity of 98%. Testing of the one
false-negative RMtb-PCR specimen was repeated, and the
specimen was found to be positive by RMtb-PCR (Table 4).
None of the 91 specimens growing MOTT were positive by
RMtb-PCR, for a specificity of 100%. The PPV and NPV for
RMtb-PCR as applied to BACTEC were 100 and 99%, respectively.
DISCUSSION
Our study demonstrates the large-scale application of the
commercial RMtb-PCR, a standardized nucleic acid amplification assay, for the rapid diagnosis of tuberculosis. Our results
showed that the sensitivity of RMtb-PCR for all non-BACTEC
specimens against an adjusted gold standard was 79%. For
smear-positive specimens, the sensitivity was 98%, and for
smear-negative specimens, the sensitivity was 53%. This was
consistent with data reported by others (1, 11, 27,). A survey of
state health laboratories using conventional culture revealed
that the average time from the receipt of specimens to the
reporting of results to a physician is 34 days (16). With
BACTEC, this can be shortened to 22 days, and with the
addition of nucleic acid probes, this can be shortened to 10 to
14 days. Although we routinely use BACTEC in conjunction
with nucleic acid probes, the turnaround time from specimen
receipt to result report in our hands was 25 days, compared
with 3.7 days for RMtb-PCR when the latter was run twice per
week. In a high-volume laboratory, a same-day RMtb-PCR
result could be provided.
The number of false-negative results for RMtb-PCR and the
need to determine the susceptibility of the isolates illustrate
that PCR technology with its current sensitivity must be performed in conjunction with culture. Although 17 of 24 specimens had either been divided prior to concentration and homogenization or were tissue specimens which were divided
prior to concentration and homogenization, they did not differ
from other specimens in the rate of smear, culture, or RMtbPCR positivity. Therefore, we do not feel that prior division
contributed to the number of false negatives. However, currently all specimens are homogenized prior to division for
culture and PCR. We did not test for the presence of inhibitors
in our study, which have been reported to occur in 5 to 13% of
specimens (4, 20, 25) and could have been responsible for
some of the false-negative results.
In the present study, most false-positive specimens (Table 5)
were probably due to the presence of nonviable organisms in
patients while on therapy. Published experience with PCR supports the concept that a patient can remain PCR positive after
cultures become negative. In one study, PCR remained positive 1 to 2 months after cultures became negative (17), and
occasionally results can be positive at 6 months after the initiation of therapy (18). Patients that are PCR positive after 6
months of treatment may be at high risk of relapse (17). Beige
et al. (2) found a significant number (11 of 24) of positive PCR
results in a population of patients infected with M. tuberculosis
but who were smear and culture negative and had no evidence
of clinical disease; we found only one such patient. Only one
false-positive specimen was attributed to contamination. In
addition, five specimens (four M. xenopi and one MAC) may
have generated false-positive results. The optical densities of
these specimens tended to be lower than those of specimens
TABLE 6. Summary of performance of RMtb-PCR on the
basis of culture and adjusted gold standard
Specimens
Clinicala
Smear positivea
Smear negativea
Respiratorya
BACTEC cultureb
Adjusted gold standard [no. (%) of specimens]
Sensitivity
Specificity
PPV
NPV
77 (79)
98 (98)
50 (53)
83 (84)
98 (98)
99 (99)
76 (93)
99 (100)
99 (99)
100 (100)
81 (93)
86 (97)
71 (81)
82 (90)
100 (100)
98 (98)
97 (97)
98 (98)
99 (99)
99 (99)
a
Includes all specimens tested directly by RMtb-PCR (i.e., no BACTEC
cultures).
b
RMtb-PCR results from BACTEC culture (growth indices $10).
138
WOBESER ET AL.
containing M. tuberculosis but were above the assay cutoff.
Although these readings may represent a biological false positive, none of 35 BACTEC specimens which grew M. xenopi (or
the 49 growing MAC) were positive by RMtb-PCR. It is unlikely that these patients were dually infected with M. tuberculosis, given that only MOTT were cultured in at least two
specimens from all but one patient. We are currently investigating if there is a biological basis for this potential crossreactivity.
The rapid detection of mycobacteria by smear is hampered
by its lack of sensitivity and its inability to differentiate between
mycobacterial species. For respiratory specimens, the overall
sensitivity of RMtb-PCR was 84% (98 and 56% on smearpositive and smear-negative specimens, respectively). For smearpositive specimens, rapid exclusion of M. tuberculosis can save
unnecessary respiratory isolation and potential contact tracing
costs. Of smear-positive respiratory isolates, 37% grew MOTT
(Table 1); this is higher than numbers published by Yajko et
al., who grew MOTT from 8% of smear-positive sputa and
29% of smear-positive BAL (28). The differentiation of M.
tuberculosis from MOTT on smear-positive specimens in a
timely fashion also allows for the early institution of appropriate therapy.
This study helps to define the role of PCR assays in the
management of patients with suspected tuberculosis. Two areas in which RMtb-PCR performed well and can likely be
demonstrated to be cost-effective have been identified. The
first area is the early species identification of smear-positive
specimens. In this setting, we found, as did D’Amato et al. (11),
that a negative RMtb-PCR result virtually excluded tuberculosis. The second setting in which RMtb-PCR may be indicated
is in its early application to positive BACTEC specimens.
Forbes and Hicks also found PCR to be very sensitive (100%)
and specific (99.7%) when applied to BACTEC specimens
with a growth index greater than 10 (15). They found the time
to identification of M. tuberculosis to be 14 days with PCR
versus 29 days with nucleic acid probes. In our hands, the
RMtb-PCR result was available a mean of 4 days before the
results of nucleic acid probe tests. Testing of all BACTEC
specimens at the earliest positive growth index could increase
this time advantage.
At this time, the Public Health Service recommends that
conventional laboratory methods (including BACTEC and nucleic acid probes) be used for the detection of M. tuberculosis
(6). The appropriate application of a rapid diagnostic tool such
as RMtb-PCR can dramatically shorten the time to diagnosis.
Given the reliability of RMtb-PCR for smear-positive specimens and specimens positive on BACTEC, we now use RMtbPCR routinely in these two settings. The use of the RMtb-PCR
test on an outsource basis for smear-positive patients is costeffective in an institution which sees cases of pulmonary
MOTT to M. tuberculosis at a ratio of smear-positive cases of
1:8 or less by the most conservative isolation cost scenarios
for which isolation days may be saved (10). The greatest potential for individual institutional cost savings is in settings with
large HIV and immunosuppressed populations, in which both
MOTT and M. tuberculosis are prevalent. The greatest health
care savings are realized when specimens are outsourced from
multiple institutions to a single central laboratory facility. To
optimize tuberculosis infection control practices and to prevent future outbreaks, early diagnosis of infectious individuals
is critical. The availability of highly standardized nucleic acid
amplification technologies promises to be an effective tool for
attaining this goal.
J. CLIN. MICROBIOL.
ACKNOWLEDGMENTS
We thank the following members of the Toronto Rapid Diagnostics
Consortium for providing specimens: A. Born and E. Szentgyorgyi,
North York Branson Hospital; M. Karmali, Hospital for Sick Children;
D. Low, Mount Sinai Hospital; A. Medline, Northwestern General
Hospital; A. Gryfe and A. Perl, Queensway General Hospital; A.
Simor, Sunnybrook Health Science Centre; R. Devlin, The Wellesley
Hospital; and M. Vearncombe, Women’s College Hospital.
REFERENCES
1. Beavis, K. G., M. B. Lichty, D. L. Jungkind, and O. Giger. 1995. Evaluation
of Amplicor PCR for direct detection of Mycobacterium tuberculosis from
sputum specimens. J. Clin. Microbiol. 33:2582–2586.
2. Beige, J., J. Lokies, T. Schaberg, U. Finckh, M. Fischer, H. Mauch, H. Lode,
B. Köhler, and A. Rolfs. 1995. Clinical evaluation of a Mycobacterium tuberculosis PCR assay. J. Clin. Microbiol. 33:90–95.
3. Bloom, B. R. 1992. Tuberculosis—back to a frightening future. Nature (London) 358:538–539.
4. Brisson-Noel, A., C. Aznar, C. Chureau, S. Nguyen, C. Pierre, M. Bartoli, R.
Bonete, G. Pialoux, B. Gicquel, and G. Garrigue. 1991. Diagnosis of tuberculosis by DNA amplification in clinical practice evaluation. Lancet 338:
364–366.
5. Centers for Disease Control and Prevention. 1991. Nosocomial transmission
of multidrug-resistant tuberculosis among HIV-infected persons—Florida
and New York, 1988–1991. Morbid. Mortal. Weekly Rep. 40:585–591.
6. Centers for Disease Control and Prevention. 1993. Diagnosis of tuberculosis
by nucleic acid amplification methods applied to clinical specimens. Morbid.
Mortal. Weekly Rep. 42:686.
7. Centers for Disease Control and Prevention. 1993. Tuberculosis morbidity—
United States 1992. Morbid. Mortal. Weekly Rep. 42:696–704.
8. Chain, K., 1995. Clinical microscopy, p. 33–51. In P. R. Murray, E. J. Baron,
M. A. Pfaller, F. C. Tenover, and R. H. Yolken (ed.), Manual of clinical
microbiology, 6th ed. American Society for Microbiology, Washington, D.C.
9. Clarridge, J. E., III, R. M. Shawar, T. M. Shinnick, and B. B. Plikaytis. 1993.
Large-scale use of polymerase chain reaction for detection of Mycobacterium
tuberculosis in a routine mycobacteriology laboratory. J. Clin. Microbiol. 31:
2049–2056.
10. Conly, J., S. Krajden, M. Krajden, R. Bannatyne, W. Wobeser, and The
Toronto Rapid Diagnostics Consortium. 1995. Conventional vs rapid molecular diagnostic strategies for M. tuberculosis (M.tb): a cost-effectiveness
analysis (CEA), abstr. D93, p. 83. In Program and abstracts of the 35th
Interscience Conference on Antimicrobial Agents and Chemotherapy.
American Society for Microbiology, Washington, D.C.
11. D’Amato, R. F., A. A. Wallman, L. H. Hochstein, P. M. Colaninno, M.
Scardamaglia, E. Ardila, M. Ghouri, K. Kim, R. C. Patel, and A. Miller.
1995. Rapid diagnosis of pulmonary tuberculosis by using Roche AMPLICOR Mycobacterium tuberculosis PCR test. J. Clin. Microbiol. 33:1832–1834.
12. Eisenach, K. D., M. D. Sifford, M. D. Cave, J. H. Bates, and J. T. Crawford.
1991. Detection of Mycobacterium tuberculosis in sputum samples using a
polymerase chain reaction. Am. Rev. Respir. Dis. 144:1160–1163.
13. Ellner, J. E., A. R. Hinman, S. W. Dooley, M. A. Fischl, K. A. Sepkowitz,
M. J. Goldberger, T. M. Shinnick, M. D. Iseman, and W. R. Jacobs, Jr. 1993.
Tuberculosis symposium: emerging problems and promise. J. Infect. Dis.
168:537–571.
14. Folgueira, L., R. Delgado, E. Palenque, and A. R. Noriega. 1993. Detection
of Mycobacterium tuberculosis DNA in clinical samples by using a simple lysis
method and polymerase chain reaction. J. Clin. Microbiol. 31:1019–1021.
15. Forbes, B. A., and K. E. Hicks. 1994. Ability of PCR assay to identify
Mycobacterium tuberculosis in BACTEC 12B vials. J. Clin. Microbiol. 32:
1725–1728.
16. Huebner, R. E., R. C. Good, and J. I. Tokars. 1992. Current practices in
mycobacteriology: results of a survey of state public health laboratories. J.
Clin. Microbiol. 31:771–775.
17. Kennedy, N., S. H. Gillespie, A. O. S. Saruni, G. Kisyombe, R. McNerney,
F. I. Ngowi, and S. Wilson. 1994. Polymerase chain reaction for assessing
treatment response in patients with pulmonary tuberculosis. J. Infect. Dis.
170:713–716.
18. Levee, G., P. Glaziou, B. Gicquel, and S. Chanteau. 1994. Follow-up of
tuberculosis patients undergoing standard anti-tuberculosis chemotherapy
by using a polymerase chain reaction. Res. Microbiol. 145:5–8.
19. Nolte, F. S., and B. Metchock. 1995. Mycobacterium, p. 400–437. In P. R.
Murray, E. J. Baron, M. A. Pfaller, F. C. Tenover, and R. H. Yolken (ed.),
Manual of clinical microbiology, 6th ed. American Society for Microbiology,
Washington, D.C.
20. Nolte, F. S., B. Metchock, J. E. McGowan, Jr., A. Edwards, O. Okwumabua,
C. Thurmond, P. S. Mitchell, B. Plikaytis, and T. Shinnick. 1993. Direct
detection of Mycobacterium tuberculosis in sputum by polymerase chain reaction and DNA hybridization. J. Clin. Microbiol. 31:1777–1782.
21. Noordhoek, G. T., A. H. J. Kolk, G. Bjune, D. Catty, J. W. Dale, P. E. M.
Fine, P. Godfrey-Faussett, S.-N. Cho, T. Shinnick, S. B. Svenson, S. Wilson,
VOL. 34, 1996
22.
23.
24.
25.
ROCHE AMPLICOR PCR ASSAY FOR M. TUBERCULOSIS
and J. D. A. van Embden. 1994. Sensitivity and specificity of PCR for
detection of Mycobacterium tuberculosis: a blind comparison study among
seven laboratories. J. Clin. Microbiol. 32:277–284.
Pfaller, M. A. 1994. Application of new technology to the detection, identification, and antimicrobial susceptibility testing of mycobacteria. Am. J. Clin.
Pathol. 101:329–337.
Simor, A. E., I. E. Salit, and H. Vellend. 1984. The role of Mycobacterium
xenopi in human disease. Am. Rev. Respir. Dis. 129:435–438.
Sjöbring, U., M. Mecklenburg, A. B. Andersen, and H. Miörner. 1990.
Polymerase chain reaction for detection of Mycobacterium tuberculosis. J.
Clin. Microbiol. 28:2200–2204.
Soini, H., M. Skurnik, K. Liippo, E. Tala, and M. K. Viljanen. 1992. Detection and identification of mycobacteria by amplification of a segment of the
139
gene coding for the 32-kilodalton protein. J. Clin. Microbiol. 30:2025–2028.
26. Telenti, A., F. Marchesi, M. Balz, F. Bally, E. C. Böttger, and T. Bodmer.
1993. Rapid identification of mycobacteria to the species level by polymerase
chain reaction and restriction enzyme analysis. J. Clin. Microbiol. 31:175–178.
27. Vuorinen, P., A. Miettinen, R. Vuento, and O. Hällström. 1995. Direct
detection of Mycobacterium tuberculosis complex in respiratory specimens by
Gen-Probe amplified Mycobacterium Tuberculosis Direct Test and Roche
Amplicor Mycobacterium Tuberculosis Test. J. Clin. Microbiol. 33:1856–
1859.
28. Yajko, D. M., P. S. Nassos, C. A. Sanders, J. J. Madej, and W. K. Hadley.
1994. High predictive value of the acid-fast smear for Mycobacterium tuberculosis despite the high prevalence of Mycobacterium avium complex in
respiratory specimens. Clin. Infect. Dis. 19:334–336.