Electric Field

Ion mobility spectrometry has become the most successful and widely used technology for the detection of trace levels of nitro-organic explosives on handbags and carry on-luggage in airports throughout the US. The low detection limits are provided by the efficient ionization process, namely, atmospheric pressure chemical ionization (APCI) reactions in negative polarity. An additional level of confidence in a measurement is imparted by characterization of ions for mobilities in weak electric fields of a drift tube at ambient pressure. Findings from over 30 years of investigations into IMS response to these explosives have been collected and assessed to allow a comprehensive view of the APCI reactions characteristic of nitro-organic explosives. Also, the drift tube conditions needed to obtain particular mobility spectra have been summarized. During the past decade, improvements have occurred in IMS on the understanding of reagent gas chemistries, the influence of temperature on ion stability, and sampling methods. In addition, commercial instruments have been refined to provide fast and reliable measurements for on-site detection of explosives. The gas phase ion chemistry of most explosives is mediated by the fragile CONO(2) bonds or the acidity of protons. Thus, M(-) or M.Cl(-) species are found with only a few explosives and loss of NO(2), NO(3) and proton abstraction reactions are common and complicating pathways. However, once ions are formed, they appear to have stabilities on time scales equal to or longer than ion drift times from 5-20 ms. As such, peak shapes in IMS are suitable for high selectivity and sensitivity.

We analyze the pair production of charged particles in two-dimensional Anti-de Sitter space (AdS_2) with a constant, uniform electric field. We compute the production rate both at a semi-classical level, viewing Schwinger pair production as a tunneling event, and at the full quantum level, by extracting the imaginary part of the one-loop amplitude. In contrast to the usual Schwinger pair production in flat space, pair production in AdS_2 requires a sufficiently large electric field E^2> M^2+1/4 in order to overcome the confining effect of the AdS geometry -- put in another way, the presence of an electric field E raises the Breitenlohner-Freedman bound to M^2 > -1/4 + E^2. For E greater than this threshold, the vacuum is unstable to production of charged pairs in the bulk. We expect our results to be helpful in constructing supersymmetric AdS_2 X S^2 perturbative string vacua, which enter in the near-horizon limit of extremal charged black holes. Although the generalized Breit...

One of the important phenomena which is important in equipment when they are under high voltage stress is Partial discharge (PD). Partial discharge measurement is commonly used to evaluate the performance of the insulation in high voltage system. Modeling of the discharge in insulation can give a better understanding of this important phenomenon. A cavity within a dielectric material is a highly stressed area and the ideal place for starting partial discharge and breakdown. The applied voltage is one of the important factors that PD activity is influenced by that. Previous studies have considered the behavior of PD activity in a spherical cavity at 50Hz of sinusoidal applied voltage. However, still not so much work on the simulation of the PD activity in the cavity under different condition. Also, there is little data are available on the effect of parameters on the PD activity. This paper describes the behavior of PD activity as a function of applied voltage in a cylindrical cavity within a homogeneous dielectric. COMSOL and MATLAB software were used to carry out the simulation based on the finite element method (FEM). The number of PDs per cycle changed with different applied voltage so the highest number of PD at 20kV and the lowest value at 8kV. The maximum PD magnitude is raised from 1200pC at 8kV to 2400pC at 20kV applied voltage. The number of PD is most prevalent for sinusoidal followed by triangular waveform and then sawtooth. Comparison of the simulation results and experimental results are in good agreement. The result can help the researcher to understand more about the characteristics and behavior of partial discharge. Which may help the insulation diagnostic testing or condition monitoring.

We propose an equivalent circuit representation of the photogenerated charge separation and propagation in dye sensitized polycrystalline semiconductor in contact with a redox electrolyte. The suggested equivalent circuit for this type of photocell is based on an electrical transmission-line, and uses distributed photodiode model for the semiconductor-redox electrolyte interface. It was found that for small signal conditions, diodes can be replaced by equivalent elements, each consisting of a resistor and a capacitor connected in series. The equivalent circuit also provides for Beer-Lambert characteristics of light absorption. The simulation of the transmission line equivalent circuit, subjected to short pulse illumination, allows us to reproduce the experimentally found difference between the photocurrent responses of the photocell to illumination from the electrolyte side, and its response to illumination through the semitransparent back electrode, to which the polycrystalline sem...

A set of heavily doped Al0.48In0.52As samples grown by molecular beam epitaxy on InP (Fe) substrates was investigated using the photoreflectance (PR) technique. The spectra at 300 K are characterized by a transition in the vicinity of the InP energy gap, followed by strongly damped Franz-Keldysh oscillations (FKOs) which do not appear when the spectra are obtained at 77 K. The builtin electric field estimated from FKOs shows a small doping dependence but is substantially affected by the inclusion of a thin layer of AlxGayIn1-x-yAs (x≡0.22) at the interface between InP (Fe) and AlInAs:Si. In order to explain these results, a model based on the discontinuity of the energy bands in the InP/AlInAs and InP/AlGaInAs/AlInAs systems and also on the matching of the Fermi levels between the different materials is suggested.

The purpose of this study was to examine the feasibility of using irreversible electroporation (IRE) as a non-chemical method for eliminating microorganisms of liquid drugs. The studied drug was a topical ophthalmic medication, a pharmaceutical field in which the problem of microbial contamination has not yet been adequately solved, especially in the case of eye drops prescribed for chronic use. Commercially available Hylo-Comod® preservative-free eye drop solution was subjected to contamination with Escherichia coli bacteria (106 colony forming units/mL). Electroporation parameters for bacterial control were investigated by comparing the effects of electrical fields of 5.4, 7.2, and 10 kV/cm, delivered as 100-µs square pulses at 1 Hz in sequences of 10 pulses, 20 pulses, or 20 pulses delivered as four sets of five pulses with 1-min intervals between each set. Microorganism survival after treatment was determined by pour plate counting. Effects of the treatment parameters on temperature and pH were recorded. Bacterial survival was lowest (0.14% ± 0.03%) after application of 20 pulses delivered as four separate sets. With that application mode, the solution remained at pH 7.5 and the temperature rose to 35.6° ± 0.2°C. Because IRE can be efficiently delivered under conditions that avoid the potentially deleterious effects of electrical pulses on temperature and pH, it appears to be a feasible method for bacterial control of drugs in solution. The principles established in this study can be applied to any drug in solution and optimized individually according to the solution's composition.

The differentiation and proliferation of neural stem/progenitor cells (NPCs) depend on various in vivo environmental factors or cues, which may include an endogenous electrical field (EF), as observed during nervous system development and repair. In this study, we investigate the morphologic, phenotypic, and mitotic alterations of adult hippocampal NPCs that occur when exposed to two EFs of estimated endogenous strengths. NPCs treated with a 437 mV/mm direct current (DC) EF aligned perpendicularly to the EF vector and had a greater tendency to differentiate into neurons, but not into oligodendrocytes or astrocytes, compared to controls. Furthermore, NPC process growth was promoted perpendicularly and inhibited anodally in the 437 mV/mm DC EF. Yet fewer cells were observed in the DC EF, which in part was due to a decrease in cell viability. The other EF applied was a 46 mV/mm alternating current (AC) EF. However, the 46 mV/mm AC EF showed no major differences in alignment or differentiation, compared to control conditions. For both EF treatments, the percent of mitotic cells during the last 14 h of the experiment were statistically similar to controls. Reported here, to our knowledge, is the first evidence of adult NPC differentiation affected in an EF in vitro. Further investigation and application of EFs on stem cells is warranted to elucidate the utility of EFs to control phenotypic behavior. With progress, the use of EFs may be engineered to control differentiation and target the growth of transplanted cells in a stem cell-based therapy to treat nervous system disorders.

A novel low-loss planar dielectric waveguide is proposed. It is based on a high-permittivity dielectric slab parallel to a metal ground. The guiding channel is limited at the sides by a number of air holes which are lowering the effective permittivity. A mode with the electric field primarily parallel to the ground plane is used, similar to the E11x mode of an insulated image guide. A rather thick gap layer between the ground and the high-permittivity slab makes this mode to show the highest effective permittivity. The paper discusses the mode dispersion behaviour and presents measured characteristics of a power divider circuit operating at a frequency of about 8 GHz. Low leakage of about 14% is observed at the discontinuities forming the power divider. Using a compact dipole antenna structure, excitation efficiency of more than 90% is obtained.

We report numerical results on the repton model of Rubinstein [Phys. Rev. Lett. 59, 1946 (1987)] as adapted by Duke [Phys. Rev. Lett. 62, 2877 (1989)] as a model for the gel electrophoresis of DNA. We describe an efficient algorithm with which we have simulated chains of N reptons with N several hundred in some instances. The diffusion coefficient D