Non Linear Optimization

The aim of this work is to present the structure and the application of a decision support system (DSS) designed to help decision makers of a municipality in the development of incineration, disposal, treatment and recycling integrated programs. Specifically, within a MSW management system, several treatment plants and facilities can generally be found: separators, plants for production of refuse derived fuel (RDF), incinerators with energy recovery, plants for treatment of organic material, and sanitary landfills. The main goal of the DSS is to plan the MSW management, defining the refuse flows that have to be sent to recycling or to different treatment or disposal plants, and suggesting the optimal number, the kinds, and the localization of the plants that have to be active. The DSS is based on a decision model that requires the solution of a constrained non-linear optimization problem, where some decision variables are binary and other ones are continuous. The objective function ...

Decompression Sickness (DCS) may occur when divers decompress from a hyperbaric environment. To prevent this, decompression procedures are used to get safely back to the surface. The models whose procedures are calculated from, are traditionally validated using clinical symptoms as an endpoint. However, DCS is an uncommon phenomenon and the wide variation in individual response to decompression stress is poorly understood. And generally, using clinical examination alone for validation is disadvantageous from a modeling perspective. Currently, the only objective and quantitative measure of decompression stress is Venous Gas Emboli (VGE), measured by either ultrasonic imaging or Doppler. VGE has been shown to be statistically correlated with DCS, and is now widely used in science to evaluate decompression stress from a dive. Until recently no mathematical model has existed to predict VGE from a dive, which motivated the development of the Copernicus model. The present article compiles a selection experimental dives and field data containing computer recorded depth profiles associated with ultrasound measurements of VGE. It describes a parameter estimation problem to fit the model with these data. A total of 185 square bounce dives from DCIEM, Canada, 188 recreational dives with a mix of single, repetitive and multi-day exposures from DAN USA and 84 experimentally designed decompression dives from Split Croatia were used, giving a total of 457 dives. Five selected parameters in the Copernicus bubble model were assigned for estimation and a non-linear optimization problem was formalized with a weighted least square cost function. A bias factor to the DCIEM chamber dives was also included. A Quasi-Newton algorithm (BFGS) from the TOMLAB numerical package solved the problem which was proved to be convex. With the parameter set presented in this article, Copernicus can be implemented in any programming language to estimate VGE from an air dive.

This paper presents the direct route to Design by Analysis (DBA) of the new European pressure vessel standard in the language of limit and shakedown analysis (LISA). This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for some examples from the DBA-Manual. One observation from the examples is, that the optimisation approach gives reliable and close lower bound solutions leading to simple and optimised design decision.

The recent advances in MEMS, embedded systems and wireless communication technologies are making the realization and deployment of networked wireless microsensors a tangible task. In this paper we study node localization, a component technology that would enhance the effectiveness and capabilities of this new class of networks. The n-hop multilateration primitive presented here, enables ad-hoc deployed sensor nodes to accurately estimate their locations by using known beacon locations that are several hops away and distance measurements to neighboring nodes. To prevent error accumulation in the network, node locations are computed by setting up and solving a global non-linear optimization problem. The solution is presented in two computation models, centralized and a fully distributed approximation of the centralized model. Our simulation results show that using the fully distributed model, resource constrained sensor nodes can collectively solve a large non-linear optimization problem that none of the nodes can solve individually. This approach results in significant savings in computation and communication, that allows fine-grained localization to run on a low cost sensor node we have developed.

Abstract—Applications of the Particle Swarm Optimization (PSO) to solve image processing problem with a reference to a new automatic enhancement technique based on real-coded particle swarms is proposed in this paper. The enhancement process is a non-linear optimization problem with several constraints. The objective of the proposed PSO is to maximize an objective fitness criterion in order to enhance the contrast and detail in an image by adapting the parameters of a novel extension to a local enhancement technique. ...

Various empirical and theoretical models of the surface reflectance have been introduced so far. Most of these models are based on functions with non-linear parameters and therefore faces some computational difficulties involved in non-linear optimization processes. In this paper, we introduce a new approach for approximating Bidirectional Reflectance Distribution Functions (BRDF) by employing response surface methodology. The proposed model employs principal component transformations of the explanatory variables which are essentially functions of incoming and outgoing light directions. The resulting model is linear and can be used to represent both isotropic and anisotropic reflectance for diffuse and glossy materials. Considering some widely used reflection models including the Ward model, the Ashikhmin–Shirley model and the Lafortune model, we demonstrate empirically that satisfactory approximations can be made by means of the proposed general, simple and computationally efficient linear model.

Over the last 30 years NRL's Composite Materials and Structures (CMS) group has been developing a data driven system identification inverse approach for characterizing the constitutive behavior of polymer matrix composites (PMCs). The core concept in this approach has been the experimental identification of a dissipated energy density (DED) function. This is achieved through establishing a non-linear optimization scheme for

In this study, we present a calibration technique that is valid for all single-viewpoint catadioptric cameras. We are able to represent the projection of 3D points on a catadioptric image linearly with a 6×10 projection matrix, which uses lifted coordinates for image and 3D points. This projection matrix can be computed from 3D–2D correspondences (minimum 20 points distributed in three