List1 Lloyd's Register
List1 Lloyd's Register
Con Cast
Continuous Casting
E.A.F.
O.H.
Open Hearth
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Sydney
Steelmaking
Plates
Normal Strength
Higher Strength
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
Australia
BLUESCOPE STEEL (AIS) PTY. LTD.
51
51
13
6
Austria
BREITENFELD EDELSTAHL AG
Vienna
Steelmaking
E.A.F./Ingot/Con Cast
Breitenfeldstrasse 22
A-8662 Mitterdorf im Mrztal
Including VD/VOD
Tel: +43 (0)3858 6161 231 Fax +43 (0)3858 6161 248 Email mailto:marina.paller@breitenfeld.at http://www.breitenfeld.at
Certificate # MD00/3255/0003/1 Expiry Date: 08/06/2012
BHLER EDELSTAHL GmbH
Vienna
Steelmaking
Bars
E.A.F./Ingot/Con Cast
Structural
As below
carbon, carbon-manganese, alloy, austenitic
stainless, duplex stainless
220
Mariazellerstrae 25
Postfach 96
A-8605 Kapfenberg
Tel: +43 3862 20 37063 Fax: +43 3862 20 37559 Email: mailto:walter.wolflehner@bohler-edelstahl.at Web:http://www.bohler-edelstahl.com
Certificate #: MD00/0200/0007/1 Expiry date: 22/01/2015
BHLER YBBSTAL PROFIL GmbH
Vienna
Sections
Normal Strength
Higher Strength
Normal Strength
Higher Strength
Structural
Bars
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
carbon, carbon-manganese, alloy, austenitic
stainless, duplex stainless
20
20
20
20
20
Waidhofnerstrae 8
3333 Bhlerwerk
Tel: +43 7448 7007 504 Fax: +43 7448 7007 250 Email: mailto:herwig.kohlreiter@bohler-profil.com Web:http://www.bohler-profil.com
High alloy bars and sections may be accepted for approved applications.
Certificate #: MD00/0202/0005/1 Expiry date: 29/01/2012
SONDERSTAHLWERK BREITENFELD GmbH
Vienna
ESR
Ingots
38
Breitenfeldgasse 23
A-8661 Wartberg
Vienna
Bars
Normal Strength
Structural
Machinery
A
carbon, carbon-manganese
carbon, carbon-manganese, carbon-manganese
120
120
120
Gustahlwerkstrasse 21
A-8750 Judenburg
Tel: +43 3572 701-358 Fax: +43 3572 701-248 Email: mailto:christian.sunnitsch@stj.at
Certificate #: MD00/1643/0006/1 Expiry date: 29/01/2015
VOESTALPINE GROBBLECH GmbH
Vienna
Steelmaking
Plates
Web: http://www.stahl-judenburg.com
B.O.S. / Con Cast
Normal Strength
Higher Strength
Clad
Page
As below
A, B, D, E
AH40, AH42, DH40, DH42, EH40, EH42
AH32, AH36, DH32, DH36, EH32, EH36, FH32,
FH36
360AR
410AR
360FG, 410FG, 460FG, 490FG, 510FG
1.5Ni, 3.5Ni, 5Ni, 9Ni
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,
LTEH36, LTFH32, LTFH36
D/304L
140
55
140
40
50
140
50
140
50
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Steelmaking
Semi-Finished
P.O Box 3
Voest.- Alpine - Str. 3
A-4020 Linz
285
Kerpelystrae 199
A 8700 Leoben
Tel: +43 50304 25-4659 Fax: +43 50304 65-2464 Email: mailto:karin.rockenschaub@voestalpine.com Web:http://www.voestalpine.com/stahldonawitz
Certificate #: MD00/2976/0004/1 Expiry date: 21/04/2015
Belgium
APERAM Genk
Antwerp
Steelmaking
E.A.F./A.O.D./Con Cast
E.A.F./V.O.D./Con Cast
Slabs
Austenitic Stainless
austenitic stainless
austenitic stainless
austenitic stainless
304L, 304LN, 316L, 316LN, 317L, 317LN, 321,
347
Steelmaking
Semi-Finished
carbon, carbon-manganese
carbon, carbon-manganese, Normal strength,
Higher Strength
250
Steelmaking
Semi-Finished
E.A.F./Ingot/Con Cast
Ingots
Blooms
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy, Ferritic
Stainless Steel*
16
600
Semi-Finished
Plates
200
14
Swinnenwijerweg 5
Genk - Zuid, Zone 6A
B-3600 Genk
Antwerp
Antwerp
Antwerp
Steelmaking
Plates
As below
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36, EH40
DH42, DH46, DH50, DH55, DH62, DH69, EH42,
EH46, EH50, EH55, EH62, EH69, FH42, FH46,
FH50, FH55, FH62, FH69
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,
LTEH36, 5Ni
304L, 304LN, 316L, 316LN
UNS S31803(MOD)*
50
50
100
40
50
50
50
40
Antwerp
Plates
Web: http://www.arcelormittal.com
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Page
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360, 410
360FG, 410FG, 460FG, 490FG, 510FG
120
120
25
50
120
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Steelmaking
carbon, carbon-manganese
Semi-Finished
Slabs
carbon, carbon-manganese
Normal Strength
16
A, B
19
Higher Strength
AH27S, AH32
16
460FG, 490FG
16
360FG, 410FG
19
Brazil
ARCELORMITTAL BRAZIL S/A (ARCELORMITTAL
TUBARO )
Rio de Janeiro
250
Carbon and carbon-manganese grades cover the following LR normal and higher tensile strength grades. A, B, D, E, AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
Tel: +55 27 3348 3261 Fax: +55 27 3348 2211
Email : mailto:adelson.nascimento@arcelormittal.com
Web: http://www.arcelormittal.com/br/
Certificate #: MD00/0342/0008/1 Expiry date: 01/07/2014
GERDAU AOMINAS S.A.
Rio de Janeiro
Steelmaking
Semi-Finished
B.O.S./Ingot/Con Cast
Rolled Billets
Slabs
Blooms
Billets
Rolled Slabs
Rolled Blooms
As below
Carbon, Carbon-Manganese, Alloy
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
Carbon, Carbon-Manganese, Alloy
Carbon, Carbon-Manganese, Alloy
180
250
300
180
450
900
As below
carbon, carbon-manganese
carbon, carbon-manganese
R3
U1, U2, U3
4
125
117
125
Rodovia MG-443 KM 7
Fazenda do Cadete
36420-000-Ouro Branco-MG
Tel: +55 3137 493471 Fax: +55 3137 3215 Email: mailto:isaac.soares@gerdau.com.br web http://www.gerdau.com.br
Slabs and blooms intended for plates and forgings
Certificate #: MD00/2071/0005/1 Expiry date: 27/02/2012
GERDAU S/A
So Paulo
Steelmaking
Semi-Finished
Bars
E.A.F. / Ingot
Ingots
Machinery
Chain Cable Stock
Pindamonhagaba Plant
Rod.Luiz Dumont Villares km 2- Moreira Csar
CEP 12442-260
Pindamonhangaba S.P.
Tel: +55 12 2126 7174 Fax: +55 12 2126 7325 Email: mailto:fernando.almeida@gerdau.com.br Web:http://www.gerdau.com.br
Bars for grade R3 chain cable is restricted to supply to Companhia Brasileira Amarras with specification EC-Gr.3a.
Ingots as semi-finished products to the above maximum weight nominal 630mm x 530mm x 2150mm long are accepted for further processing for rolled
products.
Certificate #: MD00/2867/0006/1 Expiry date: 24/03/2014
USIMINAS
Rio de Janeiro
Steelmaking
Plates
Page
Normal Strength
Boiler & Pressure Vessel
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
A
360, 410
50
50
40
50
12
12
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Tel +55 (0)31 38293136 Fax +55 (0)31 38293516 Email: mailto:ssampaio@usiminas.com.br
Z25 and Z35 through thickness properties for plates of approved grades in the TM+Acc and TM+Acc+Temper conditions
Materials Quality Scheme Approved - MQS014
Certificate #: MD00/1603/0007/1 Expiry date: 24/06/2014
So Paulo
Steelmaking
As below
Plates
Normal Strength
A, B, D, E
80
Higher Strength
80
80
40
Tel: +55 13 3362-2978 Fax: +55 13 3362-3775 Email: mailto: takayochi.ueno@usiminas.com Web:http://www.usiminas.com
Specified through thickness properties for plates in the normalised condition, rolled from ingots, up to 35 mm thickness.
Specified through thickness properties for plates of grades up to DH32 and thickness up to 26mm in the normalised condition, rolled from continuously cast
slab.
Material Quality Scheme approved, MQS 044
Certificate #: MD00/1193/0008/1 Expiry date: 29/09/2014
Bulgaria
STOMANA INDUSTRY AD
Sofia
Steelmaking
Semi-Finished
Plates
As below
As below
A
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
200
40
40
25
40
Tel: +359 76 68 1730 Fax: +359 76 670 250 Emailmailto:vsofteva@stomana.bg Web: http://www.stomana.bg
Certificate #: MD00/1868/0008/1 Expiry date: 17/04/2013
Canada
ESSAR STEEL ALGOMA INC.
Toronto
Steelmaking
Plates
As below
D, E
A, B
AH32, AH36, DH32, DH36, EH32, EH36
50
60
50
As below
A
26
Toronto
Steelmaking
Sections
Cambridge Division
160 Orion Place
Cambridge
N1T 1R9
Tel: +1 519 740 2488 ext 1420 Fax: +1 519 623 2062 Email: mailto:ehannah@gerdauameristeel.com
Certificate #: MD00/3046/0003/1 Expiry date: 01/02/2013
GERDAU AMERISTEEL WHITBY
Toronto
Steelmaking
Sections
Web:http://www.gerdauameristeel.com
As below
A, B
AH27S, AH32, AH36
15
15
CSA grades 260W, 300W and 350W may be accepted for approved applications as equivalent to the appropriate Lloyd's Register grade stated above.
Tel: +1 905 668 8811 ext 2744 Fax: +1 905 668 9361 Email: mailto:rgriffith@gerdauamericsteel.com Web: http://www.gerdauameristeel.com
Certificate #: MD00/0322/0007/1 Expiry date: 31/01/2014
Page
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Dalian
Steelmaking
Plates
As below
A, B, D, E
AH42, AH46, AH50, AH55, DH42, DH46, DH50,
DH55, EH42, EH46, EH50, EH55, FH42, FH46,
FH50, FH55
AH27S, AH32, AH36, DH27S, DH32, DH36,
DH40, EH27S, EH32, EH36, EH40, FH27S, FH32,
FH36, FH40
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
1.5Ni, 3.5Ni, 5Ni, 9Ni
100
80
100
40
50
40
All grades and thicknesses with specified through thickness properties, Z25 and Z35 designations.
Tel: +86 412 676 1294 / 673 4836 Fax: +86 412 676 1293 / 673 4802 Email mailto:hp318@sina.com Web http://www.ansc.com.cn
Certificate No. MD00/1869/0008/1 Expiry date: 24/03/2012
ANGANG STEEL COMPANY LIMITED
Dalian
Steelmaking
Plates
As below
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
As below
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360FG, 410FG, 460FG, 490FG, 510FG
40
40
20
40
Tel +86 0412 675 1030 Fax +86 0412 675 2819 Email mailto:zy-zb-111@163.com
Certificate No. MD00/2757/0006/1 Expiry date: 22/10/2014
ANGANG STEEL COMPANY LIMITED
Dalian
Steelmaking
Hot Rolled Coil
20
20
20
Tel: +86 412 6334292/6734881 Fax: +86 412 6722093 Web http://www.ansteel.com.cn
Certificate #: MD00/3301/0002/1 Expiry date: 03/01/2013
ANGANG STEEL COMPANY LIMITED
Dalian
Steelmaking
Semi-Finished
Plates
As below
carbon-manganese, carbon, carbon manganese
A, B, D, E
AH32, AH36, AH40, DH32, DH36, DH40, EH32,
EH36, EH40
360FG, 410FG, 460FG, 490FG, 510FG
Plates
Normal Strength
Steelmaking
Semi-Finished
Plates
B.O.S./E.A.F./Con Cast
Slabs
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Sections
Normal Strength
As Below
Normal strength
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR, 460FG, 490FG, 510FG
360FG, 410FG
A, B
250
40
40
40
Tel: +86 412 6334292 Fax: +86 412 6722093 Web: www.ansteel.com.cn
Certificate No. MD00/3595/0002/1 Expiry date: 11/05/2012
ANSHAN HAILIANG STEEL PROCESSING CO.,
LTD.
Cheng'ang Village
Dadaowan Town
Qianshan District, Anshan City
Dalian
18
Wuhan
230
40
36
36
40
12
Yindu District
Anyang City
Henan Province
Page
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Shanghai Port
Steelmaking
As below
As below
carbon, carbon-manganese
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
A, B, D, E
AH42, AH46, AH50, AH55, DH42, DH46, DH50,
DH55, EH42, EH46, EH50, EH55
AH40, DH40, EH40, FH27S, FH32, FH36, FH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360FG, 410FG, 460FG, 490FG, 510FG
A, B, D
AH32, AH36
460FG, 490FG, 510FG
360FG, 410FG
Semi-Finished
Plates
400
450
200
130
50
68
100
100
22
12
12
22
Core Base
No 885, Fujin Road
Baoshan District
Shanghai 201900
Shanghai Port
Steelmaking
Semi-Finished
Plates
As below
carbon, carbon-manganese
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
460FG, 490FG, 510FG
360FG, 410FG
250
60
50
50
60
Tel +86 21 266488888 Fax +86 21 2664 8000 Email: to: huangjh@baosteel.com Web:http://www.baosteel.com
Semi-finished products in carbon, carbon-manganese fine grain (element combinations as stated, slabs to 2300mm wide, to 12000mm long to 54 tonnes for further
processing to rolled products
Z25 & Z35 designations made be added for plates up to 35mm thick produced in the as rolled condition from concast slab for grades A, B and D with specified
through thickness properties
Z25 & Z35 designations made be added for plates with specified through thickness properties for the approved grades in the normalised condition, normalised
rolled condition, TM condition and TM +Acc condition
Z25 & Z35 designations made be added for plates up to 40mm thick produced in the normalised rolled condition from concast slab for grades DH36 and DH32
with specified through thickness properties
Certificate No. MD00/3489/0007/1 Expiry date: 15/12/2014
Materials Quality Scheme Approved - MQS 051
BENGANG STEEL PLATES CO., LTD.
Dalian
Steelmaking
Semi-Finished
Hot Rolled Coil
Plates from coils
As below
carbon, carbon-manganese
A, B
A, B
220
20
20
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese
carbon, carbon-manganese
A, B
250
400
20
Dalian
Page
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Sections
Normal Strength
Higher Strength
A, B, D
AH27S, AH32, AH36
Tel: +86 0512 5206 1085 Fax: +86 0512 5266 1141 Email: mailto: lttg@lttg.cn Web: http://www.lttg.cn
Certificate #: MD00/3275/0003/1 Expiry date: 11/10/2012 #ENHANCED SURVEY#
CHANGSHU LONGTENG SPECIAL STEEL CO., LTD. Jiangyin
Steelmaking
Semi-Finished
Sections
As below
Normal Strength, Higher Strength
A, B
AH27S, AH32, AH36
260
20
20
Tel.:+86 512 5266 1284 Fax.: +86 512 52661284 Email: mailto: lttg@lttg.cn Web: http://www.lttg.cn
Blooms as semi finished products nominal 340mm width x nominal 12000mm length to the above maximum thickness are approved for further processing for
rolled products.
Certificate #: MD00/3976/0001/1 Expiry date: 08/12/2014
CHANGSHU YICHENG STEEL PLATE
TECHNOLOGY CO., LTD.
Nantong
Plates
Normal Strength
A, B
30
360AR, 410AR
30
Steelmaking
As below
Semi-Finished
Billets
240
Steelmaking
Sections
As below
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
U1, U2, U3
15
15
100
Tel: +86 0512 5183 8555 Fax: +86 0512 5265 1988
Certificate #: MD00/3558/0001/1 Expiry date: 14/01/2012
CHANGZHOU LONGXIANG IRON & STEEL CO.,
LTD.
Nanjing
Xinzha Town
Changzhou City
PC213013
Wuhan
Bars
Chongqing Iron and Steel Co., Ltd.
Dadukou
Chongqing
Tel: +86 23 6884 2716 Fax: +86 23 6884 6465 Email: mailto:ergetu@126.com Web: http://www.cqgt.com
Certificate #: MD00/0307/0009/1 Expiry date: 12/02/2014
CISCO
Wuhan
Steelmaking
Semi-Finished
Plates
As below
Normal strength, Higher Strength
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 460AR
360FG, 410FG, 460FG, 490FG
300
80
80
40
80
Tel: +82 623 6884 2716 Fax: +82 623 6884 9574 Email: cq_tzg775@163.com Web: http://www.cggf
Slabs as semi finished products nominal 2500mm width x 12000mm length to the above maximum thickness are approved for further processing for rolled
products.
Plates with specified through thickness properties may be accepted with the suffix Z25 or Z35 applied to Normal Strength Grades in the Normalised supply
condition and Normalizing Rolled supply condition.
Plates with specified through thickness properties may be accepted with the suffix Z25 or Z35 applied to Higher Strength Grades in the Normalised supply
condition and in the TM supply condition .
Certificate Number: MD00/3763/0004/1 Expiry date: 29/03/2013
CISCO
Wuhan
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Page
D
A, B
AH36, DH36
AH27S, AH32, DH27S, DH32
510FG
360FG, 410FG, 460FG, 490FG
360AR, 410AR
25
40
25
32
25
32
40
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Tel: +82 623 6887 3543 Fax: +82 623 6887 3543 Email: zyflwy@163.com Web: http://www.cggf
Plates with specified through thickness properties may be accepted with the suffix Z25 or Z35 applied to all Grades and supply conditions.
Certificate Number: MD00/3982/0001/1 Expiry date: 26/01/2015
DAYE SPECIAL STEEL CO., LTD.
Wuhan
Steelmaking
Bars
E.A.F./Ingot/Con Cast
Structural
Machinery
Chain Cable Stock
As below
carbon, carbon-manganese
carbon, carbon-manganese, alloy
U1, U2, API-2F
U3, R4
190
190
110
160
Steelmaking
5
280
200
200
130
Steelmaking
Semi-Finished
EAF/LRF/VD/Ingot
Ingots
Steelmaking
As below
Semi-Finished
Slabs
Plates
Normal Strength
A, B
36
Higher Strength
30
30
360, 410
36
As below
A, B
AH27S, AH32, AH36
A, B
36
36
12
Huangshi City
Hubei Province
Post code: 435001
Dalian
Semi-Finished
Bars
BEIMEN SPECIAL STEEL CO., LTD.
Fularji District
Qiqihar City
Heilongjiang Province
Tel: +86 452 6801920 Fax: +86 452 6801496 Email: mailto:lhy999@163.net
Certificate #: MD00/2907/0001/1 Expiry date: 30/07/2014
DONGBEI SPECIAL STEEL GROUP
Dalian
27
27
Tel No: +86 413 668 9161-3668 Fax no: +86 413 6674090
Email: xxxxxxxxxxxxxxx
Web: www.dtsteel.com
Certificate No MD00/xxxx/0001/1
FUJIAN PROVINCIAL SANSTEEL (GROUP) CO.,
LTD.
Guangzhou
250
Guangzhou
Steelmaking
Plates
Hot Rolled Coil
Tel: +86 (0)772 2592132 Fax: +86 (0)772 2592784 Email mailto:lspzk@163.com Web http://www.liuzousteel.com
Certificate #: MD00/2632/0006/1 Expiry date: 02/01/2015
Page
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Wuhan
Steelmaking
As below
Semi-Finished
Slabs
As below
Normal Strength
A, B, D
18
Higher Strength
18
Normal Strength
A, B, D
18
Higher Strength
18
As below
As below
As below
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
38
38
250
232,Fuxing Road,
Handan,
Hebei. 056015
Wuhan
Steelmaking
Semi-Finished
Plates
25
38
Handan Branch
232 Fuxing Road
Handan City
Hebei Province
056015
Dalian
Steelmaking
Sections
Bars
As below
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36
As below
Normal strength, Higher Strength
A, B, D
AH27S, AH32, AH36, DH32, DH36
220
220
30
30
As below
carbon, carbon-manganese
330
As below
carbon, carbon-manganese
A, B, D
A, B, D
230
25
25
20
20
38
38
Feng Village
Lincheng County
Xingtai City
Hebei Province
Dalian
Steelmaking
Semi-Finished
Plates
Nandian Town
Pingshan County
Shijiazhuang City
Tel No +86 311 8287 3953 Fax No +86 311 82873988 Mob +86 158 3111 8888
Email jingye@hbjyjt.com
Web www.hbjyjt.com
Certificate No MD00/xxxx/0001/1 Expiry Date 09/05/2015
HENGYANG VALIN STEEL TUBE CO., LTD.
Wuhan
Steelmaking
Semi-Finished
No. 10 Dalixincun
Hengyang City
Hunan Province 421001
Tel: +86 734 8872311 Fax: +86 734 8872322 Web: www.hysteeltube.com
Certificate #: MD00/3098/0001/1 Expiry date: 06/08/2013
HUNAN VALIN LIANYUAN STEEL CO., LTD.
Wuhan
Steelmaking
Semi-Finished
Hot Rolled Coil
Plates from coils
Page
10
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Sections
Normal Strength
A, B
Steelmaking
As below
As below
carbon, carbon-manganese
carbon, carbon-manganese
carbon, carbon-manganese
U2, U3
200
100
92
100
As below
carbon, carbon-manganese
320
Huangnitang, Loudi
Hunan Province
Post Code: 417009
Guangzhou
12
Nanjing
Semi-Finished
Bars
Tel +81 517 83036135 Fax +81 517 83631344 Email mailto:8865525@sina.com
Certificate #: MD00/3240/0002/1 Expiry date: 14/06/2012
JIANGSU SHAGANG GROUP CO., LTD
Jiangyin
Steelmaking
Semi-Finished
Tel: +86 512 5856 8791 Fax: +86 512 5855 8900 Email mailto: ctoec@shagang.cn Web http://www.sha-steel.com
Approval covers for con cast slabs to nominal sizes 2065mm wide x 9000mm long to the above maximum thickness for further processing for rolled products.
Certifcate Number: MD00/3127/0006/1 Expiry date: 28/10/2013
JIANGSU SHAGANG GROUP CO., LTD
Jiangyin
Plates
Normal Strength
Higher Strength
A, B, D, E
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40, FH27S,
FH32, FH36, FH40
360AR, 410AR, 460AR, 360FG, 410FG, 460FG,
490FG, 510FG
60
60
40
Tel +86 0512 58568791 Fax: +86 0512 58550818 Email: mailto:ctotec@shagang.cn Web: http://www.sha-steel.com
Plates in Grades A and B Fine Grain Al+Ti in the Normalising Rolled condition maximum thickness 60.0mm are restricted to the thickness range 40.0 to
60.0mm.
Plates in Grades D and E Fine Grain Al+Ti+Nb in the TM+Acc condition maximum thickness 60.0mm are restricted to the thickness range 40.0 to 60.0mm.
Plates in the Normalizing Rolled condition and the TM+Acc condition are restricted to a maximum width of 4150mm.
Certificate No. MD00/3388/0005/1 Expiry date: 28/10/2013
JIANGSU SHAGANG GROUP CO., LTD
Jiangyin
Plates
Normal Strength
Higher Strength
A, B, D, E
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40, FH27S,
FH32, FH36, FH40
360AR, 410AR, 460AR, 360FG, 410FG, 460FG,
490FG, 510FG
60
60
40
Tel +86 0512 5856 8800 Fax: +86 0512 5855 0818 Email: mailto:info@sha-steel.com Web: http://www.sha-steel.com
Plates in the Normalizing Rolled are restricted to a maximum width of 4650mm condition and in the TM+Acc condition are restricted to a maximum width of
4150mm.
Plates in the Normalizing Rolled condition and the TM+Acc condition are restricted to a maximum width of 4150mm.
Certificate No. MD00/3913/0003/1 Expiry date: 25/05/2014
JIANGSU SHAGANG GROUP CO., LTD
Jiangyin
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese
320
Tel: +86 512 5856 8791 Fax: +86 512 5855 8900 Email mailto: ctoec@shagang.cn Web http://www.sha-steel.com
Approval covers for con cast slabs to nominal sizes 2065mm wide x 9000mm long to the above maximum thickness for further processing for rolled products.
Certifcate Number: MD00/3127/0005/1 Expiry date: 24/05/2014
Page
11
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Steelmaking
E.A.F. / Ingot
carbon-manganese, alloy
Semi-Finished
Ingots
carbon-manganese, alloy
24
Normal Strength
A, B
25
As below
carbon, carbon-manganese, alloy
32
BAIDANGQIAO
TONGGANG ROAD
CHANGSHU
JIANGSU
Tel: +86 512 5263 1910 Fax: +86 512 5263 7325 Mail to: fuxin789@yahoo.com.cn
Certificate #: MD00/3583/0001/1 Expiry date: 28/04/2012
JIANGYIN CHANGDA STEEL CO., LTD.
Jiangyin
Plates
Tel: +86 510 8603 2250 Fax: +86 510-8603 2250 Email: panxun1@sina.com Web: http:// www.chdsteel.com
Plates are restricted to a maximum width of 2200mm.
Certificate Number: MD00/3975/0001/1 Expiry date: 03/11/2014
JIANGYIN HUAQIANG SPECIAL STEEL
Jiangyin
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
Tel: +86 510 860 60566 Fax: +86 510 860 60512 Email: mj2_hq@163.com Web: http://www.jyhuaqing.com
Ingots as semi finished products nominal 1240mm/1320mm diameter x 2770mm long to the above maximum weight are approved for further processing for
forgings.
Certificate Number: MD00/4013/0001/1 Expiry: 23/04/2015
JIANGYIN XINGCHENG SPECIAL STEEL WORKS
CO., LTD.
Jiangyin
Steelmaking
B.O.S./E.A.F./Con Cast
As Below
Semi-Finished
Slabs
Normal strength
250
Bars
Semi-finished Products
900
Structural
180
Machinery
180
R3, R3S, R4
160
U1, U2, U3
180
Tel: +86 510 6193388-6165 Fax: +86 510 6195042 Email: mailto:jyxctg@public1.wx.js.cn Web: http://www.jyxc.com
Slabs as Semi-Finished Products to the above maximum thickness, nominal 2600mm width and nominal 12000mm length are approved for further processing for
rolled products.
Bars as Semi-Finished Products in the As Cast condition to maximum diameter as stated grades are accepted for further processing for forgings.
Alloy Grade Bars as Semi-Finished Products in the As Rolled condition to maximum diameter of 280mm are accepted for further processing for forgings.
Alloy grade bars as Semi-finished Products are accepted for approved applications, Grade 34Mn2V to 230mm maximum diameter for further processing for gas
cylinders (Normalised heat treatment required), Grade 42CrMo to 300mm maximum diameter for further processing for marine structural applications
(Quenched and Tempered heat treatment required).
Bars for mooring chain cable grades are supplied to the following specifications;
R3 - R30Mn2, R3S - 28MnCrMo, R4 - 22MnCrNiMo.
The supply of mooring grade chain cable bars is restricted to the following sizes for the detailed chain manufacturers;
Zhenjiang Anchor Chain Factory - Grades R3 and R3S to 105mm diameter, Grade R4 to 160mm diameter.
Jiangsu Asian Star Anchor Chain Cable Co. Ltd - Grades R3 and R3S to 160mm diameter, Grade R4 to 135mm diameter.
Liawu Steel Zibo Anchor Chain Cable Co. Ltd Qingdao Branch - Grades R3, R3S and R4 to 114mm diameter.
Foshan Marine Anchor Chain Ltd - Grade R3S to 130mm diameter.
Certificate #: MD00/2306/0013/1 Expiry date: 26/09/2013
JIANGYIN XINGCHENG SPECIAL STEEL WORKS
CO., LTD.
Jiangyin
Steelmaking
As below
Semi-Finished
Slabs
Plates
Normal Strength
A, B, D, E
50
Higher Strength
50
50
Page
12
300
40
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
3500 Plate Mill
LR Office
Product
Category
Grade
Tel: +86 510 6193388-6165 Fax: +86 510 6195042 Email: mailto:jyxctg@public1.wx.js.cn Web: http://www.jyxc.com
Plates supplied in the Normalizing Rolled condition are restricted to 3100mm width.
Z35 designation for through thickness properties may be added to plates supplied in the normalized condition.
Slabs as semi finished products are approved for further processing for rolled products, nominal 3200mm wide x 15,000mm long to the maximum thickness
shown above.
Certificate Number: MD00/3857/0003/1 Expiry date: 08/11/2013
JIANGYIN XINGCHENG SPECIAL STEEL WORKS
CO., LTD.
Jiangyin
Plates
Normal Strength
A, B, D, E
80
Higher Strength
80
80
40
Tel: +86 510 6193388-6165 Fax: +86 510 6195042 Email: mailto:jyxctg@public1.wx.js.cn Web: http://www.jyxc.com
Plates in the Normalizing Rolled and Thermomechanical supply conditions are restricted to 3800mm maximum width.
Z35 designation for through thickness properties may be added to all plates in the above supply conditions.
Certificate Number: MD00/xxxx/0001/1 Expiry date: 10/01/2015
JINAN IRON AND STEEL CO., LTD.
Qingdao
Steelmaking
Semi-Finished
Plates
Normal Strength
Higher Strength
As below
carbon, carbon-manganese
E
A, B, D
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40, FH32,
FH36, FH40
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
A, B
AH27S, AH32, AH36
270
50
60
60
25
60
12
12
Tel +86 531 8868029 Fax +86 531 8982126 Email: sunjun815@163.com Web:http://www.jigang.com.cn
Certificate #: MD00/0799/0012/1 Expiry date: 16/10/2013
KUNSHAN DAEKYUNG STAINLESS STEEL CO.,
Shanghai Port
LTD
No. 66 Longdeng Road
Kunshan Economy Technology Development Zone
Kunshan
Plates
Austenitic Stainless
304L, 316L
80
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy
30
Steelmaking
As below
Semi-Finished
Billets
carbon, carbon-manganese
Plates
Normal Strength
A, B, D
60
Higher Strength
60
360AR, 410AR
40
60
Jiangsu Province
Dalian
Tel: +86 634 692 9229 Fax: +86 634 692 9229 Email mail to:lgjzgs@tom.com
Web http://www.lgjixie.com
Ingots approved for further processing for forgings.
Certificate #: MD00/3198/0003/1 Expiry date: 01/11/2011
LAIWU STEEL GROUP LTD. YINSHAN SECTION
STEEL CORPORATION
Qingdao
300
Page
13
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Nanjing
Steelmaking
Plates
As below
A, B
AH32, AH36, DH32, DH36
360AR, 410AR
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
23
Steelmaking
Semi-Finished
Plates
As below
Normal strength, Higher Strength
A, B, D, E
AH27S, DH27S, EH27S
AH32, AH36, DH32, DH36, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
Tel: +86 555 2886 904 Fax: +86 555 2886 904 Email: mailto:yujh0805@163.com
Web http://www.magang.com.cn
Certificate #: MD00/0965/0006/1 Expiry date: 09/10/2012
MAANSHAN IRON & STEEL COMPANY LIMITED
Nanjing
Dalian
250
50
40
50
25
50
Nanjing
Steelmaking
Semi-Finished
Plates
As below
As below
Normal strength, Higher Strength
Normal Strength, Higher Strength
Normal Strength, Higher Strength
A, B, D, E
AH40, DH40, EH40, FH27S, FH32, FH36, FH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 360, 410
360FG, 410FG, 460FG, 490FG, 510FG
U1, U2, U3
220
320
150
60
40
60
25
60
180
Nanjing Works
XieJiaDian
Liuhe District
Nanjing, Post Code: 210035
Tel: +86 25 570 74341 Fax: +86 25 57793425 EMail mailto:zgc@njsteel.com.cn Web:http://www.nisco.com.cn
Plates with specified through thickness properties may be accepted with the suffix Z35 applied to all approved grades of normal and higher strength steels.
Chain cable stock in Grades U2 and U3 is intended for further processing with quenched and tempered heat treatment, bars at 80mm diameter or less are
produced by BOS or EAF steelmaking, bars over 80mm diameter are produced by EAF steelmaking.
Billets and blooms as semi finished products to the above maximum thickness, nominal to 480mm width and to nominal 12000mm length are approved for
further processing for rolled products.
Slabs as semi finished products to the above maximum thickness, nominal to 2510mm width and to nominal 4000mm length are approved for further processing
for rolled products.
Certificate Number: MD00/1065/0011/1 Expiry date: 13/10/2013
NANJING IRON & STEEL GROUP
Nanjing
Sections
Normal Strength
Higher Strength
A, B
AH32, AH36
15
15
Steelmaking
Semi-Finished
B.O.S./Ingot/Con Cast
Ingots
Slabs
Normal Strength
Higher Strength
Boiler & Pressure Vessel
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360FG, 410FG, 460FG, 490FG, 510FG
Wuhan
Plates
Page
14
48
300
100
100
100
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
Huiche Town Industry Area,
Xixia County,
Nanyang City,
LR Office
Product
Category
Grade
Steelmaking
B.O.S./E.A.F./Ingot
As Below
Semi-Finished
Ingots
Plates
Normal Strength
32
A, B, D
35
32
360AR, 410AR
35
Henan Province
Wuhan
Sanyi
Pengzhou City
Sichuan Province
P.C 611934
Dalian
Higher Strength
Boiler & Pressure Vessel
32
Tel: +86 010 88296326 Fax: +86 010 88291295 email: mailto: lin@165e.com
Certificate #: MD00/2097/0007/1 Expiry date: 06/07/2012
QINHUANGDAO SHOUQIN METAL MATERIALS
CO., LTD.
Dalian
Steelmaking
carbon, carbon-manganese
Semi-Finished
Slabs
carbon, carbon-manganese
Plates
Normal Strength
Higher Strength
250
50
A, B
100
AH40
40
50
80
100
360AR, 410AR
16
360, 410
32
510FG
80
100
As below
carbon, carbon-manganese
A, B
A, B
230
25
25
Duzhuang
Funing County
Qinhuangdao
Zip 066326 Tel +86 010 88296326 Fax +86 010 88291295 Web http://www.shouqin.com.cn
All plate grades and thicknesses with through thickness properties, notations Z25 and Z35 may be added.
Certificate #: MD00/3136/0006/1 Expiry date: 06/02/2014
RIZHAO STEEL WIRE CO., LTD
Qingdao
Steelmaking
Semi-Finished
Hot Rolled Coil
Plates from coils
Page
15
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Guangzhou
Steelmaking
Semi-Finished
carbon, carbon-manganese
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
A, B, D, E
AH40, DH40, EH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
Plates
Qujiang District
Shaoguan City
Guangdong 512123
Tel: +86 (0)751 878 5354 Fax: +86 (0)751 878 6066
Email mailto:ly73@21cn.com
Certificate #: MD00/2175/0008/1 Expiry date: 23/11/2012
CEV is limited to a maximum of 0.45% for as rolled and nomalised higher strength steels but does not apply to TM steels
SHANDONG SHOUGUANG JUNENG SPECIAL
STEEL CO, LTD.
Qingdao
Steelmaking
As below
Bars
Structural
carbon, carbon-manganese
130
Machinery
carbon, carbon-manganese
130
U1, U2, U3
130
EAF/LRF/VD/Ingot
200
Shanghai Port
Steelmaking
200245
Tel: +86 21 54724065ext 2027 Fax: +86 21 54721007 Email mailto:chenzq@sechig.com Web http://www.shmp.sh.com
Including ingots
Certificate #: MD00/1345/0001/1 Expiry date: 25/07/2014
SHANXI TAIGANG STAINLESS STEEL CO., LTD.
Dalian
Steelmaking
Plates
E.A.F./A.O.D./Con Cast
Austenitic Stainless
Duplex Stainless
As below
304L, 316L
UNS S31803
As below
Normal strength, Higher Strength
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360FG, 410FG
A, B, D
AH27S, DH27S, AH32, DH32, AH36, DH36
410 FG, 360 FG
20
20
Dalian
Steelmaking
Semi-Finished
Hot Rolled Coil
200
25
25
25
25
25
25
Dalian
Steelmaking
Semi-Finished
Plates
E.A.F./A.O.D./Con Cast
E.A.F./V.O.D./Con Cast
Slabs
Normal Strength
Higher Strength
Austenitic Stainless
Duplex Stainless
Page
16
As below
austenitic stainless, duplex stainless
austenitic stainless, duplex stainless
carbon, carbon-manganese
A, B, D
AH32, AH36, DH32, DH36
304L, 316L, 304*, 316*
UNS S31803
180
230
40
40
40
40
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
Linfen Heavy Plate Mill
Qiaodong Street No.3
Linfen City
LR Office
Product
Category
Grade
Shanxi Province
Tel: +86 351 3017667 Fax: +86 351 3017893 Email: yangfei@tisco.com.cn Web: http:// www.tisco.com.cn
Semi finished products as slabs to the above maximum thicknesses, Carbon & Carbon-manganese nominal 2150mm wide x 2900mm long, Austenitic ad Duplex
Stainless nominal 1240mm wide x 2900mm long, are approved for further processing for rolled products.
*accepted for approved applications only.
Certificate No MD00/3688/0003/1 Expiry date 08/07/2012
SHIJIAZHUANG I & S CO., LTD.
Dalian
Steelmaking
Bars
carbon, carbon-manganese
carbon, carbon-manganese
carbon, carbon-manganese
U1, U2, U3
Steelmaking
As below
Semi-Finished
Slabs
carbon, carbon-manganese
Normal Strength
A, B, D
18
Higher Strength
18
Normal Strength
A, B, D
18
Higher Strength
18
Steelmaking
As below
Semi-Finished
Slabs
Normal Strength
A, B, D
18
Higher Strength
18
18
Normal Strength
A, B, D
18
Higher Strength
18
Normal Strength
Higher Strength
A, B, D
AH32, DH32, AH36, DH36
18
18
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy
150
150
150
Dalian
250
Tel: +86 315 8872636 Fax: +86 315 8872606 Email: mailto:uha_w@126.com
Certificate #: MD00/3820/0001/1 Expiry date: 21/11/2013
SHOUGANG QIAN'AN IRON & STEEL CO., LTD.,
HEBEI
Dalian
230
Binhe Village
Yang-dian-zi Town
Qian'an
Hebei, 064404
Dalian
Wuhan
Page
17
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Including semi-finished as-forged bars to 8.5 tonnes in carbon, carbon-manganese and alloy steel for further process of forge
Tel: +86 0472 338 6106
Fax: +86 0472 332 2346
Certificate #: MD00/3099/0004/1 Expiry date: 08/08/2013
SUQIAN NANJING IRON & STEEL
Nanjing
Sections
Normal Strength
Higher Strength
A, B
AH32, AH36
15
15
Steelmaking
Bars
As below
U1, U2, U3
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
Steelmaking
Semi-Finished
As below
A, B
150
Steelmaking
Semi-Finished
Plates
As below
carbon, carbon-manganese
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360FG, 410FG, 460FG, 490FG, 510FG
250
38
38
38
Sections
Normal Strength
Higher Strength
A, B
AH32, AH36
Steelmaking
Semi-Finished
Plates
As below
carbon, carbon-manganese, alloy
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
Tel; +86 527 844 53907 Fax: +86 527 844 80094 Email: hzefeng@yahoo.com.cn
Certificate: MD00/3741/0002/1 Expiry date: 17/12/2014
SUZHOU SUXIN SPECIAL STEEL CO., LTD.
Shanghai Port
120
Wuhan
36
Tel +86 351 636 6770 Fax: +86 351 636 6750
Email: litubin_9365@yahoo.com.cn
Web: www.tyhi.com.cn
Certificate #: MD00/3412/0002/1 Expiry date: 03/10/2013
TANGSHAN GREATWALL IRON & STEEL GROUP
Dalian
Tel: +86 315 7769 566 Fax: +86 315 7769 566
Certificate #: MD00/3600/0001/1 Expiry date: 09/06/2012
TANGSHAN HEAVY PLATE CO., LTD.
Dalian
Tel No: +86 315 4958304 Fax No: +86 315 4959038
Email tszhaoyujun@163.com
Certificate #: MD00/3475/0003/1 Expiry date: 01/06/2014
TANGSHAN XINXIN SPECIAL STEEL CO. LTD
Dalian
14
14
Tel: +86 0315 412 5016; Fax: +86 0315 412 5016
Email:mailto: mengfen123@163.com
Web: www.xxtg.cn
Certificate #: MD00/3468/0004/1 Expiry date: 18/05/2011
TIANJIN IRON AND STEEL GROUP CO. LTD.
Dalian
Page
18
250
38
50
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
398 Jintang Road
Dongli District
Tianjin
LR Office
Product
Category
Grade
Steelmaking
Semi-Finished
carbon, carbon-manganese
carbon, carbon-manganese
Steelmaking
E.A.F. / Ingot
As below
Semi-Finished
Ingots
43
Sections
Normal Strength
Higher Strength
A, B
AH32, AH36
15
15
Web:http://www.tjyhsy.com
Dalian
310
Jintang Road
300301
Dalian
Dalian
Qingdao
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
70
70
Steelmaking
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
As below
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360, 410
50
50
40
50
25
25
12
As below
As below, Normal strength, Higher Strength
A, B, D
AH32, AH36, DH32, DH36, EH32, EH36
360FG, 410FG, 460FG, 490FG, 510FG
300
50
50
50
Ingots
100
Wuhan
Wuhan
Steelmaking
Semi-Finished
Plates
Tel: +86 711 3233225 Fax: +86 711 3233225 Email mailto: chencaiyuan@sina.com
Certificate #: MD00/3931/0002/1 Expiry date: 05/07/2014
WUHAN HEAVY INDUSTRY
Wuhan
Semi-Finished
Tel No: +86 027 6886 1813 Fax No: +86 027 6886 1810
Email wh471zg@163.com
Web www.whzg.com.cn
Certificate No: MD00/1681/0001/1 Expiry date: 05/07/2014
Page
19
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Nanjing
Sections
Normal Strength
A, B
Higher Strength
14
E.A.F./Ingot/Con Cast
Normal Strength
Higher Strength
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
Binhu District
Wuxi City, PC214121
Jiangsu province
Tel: +86 510 85062529 Fax: +86 510 85071648 Email: mailto:jswxzx@yahoo.com.cn
Certificate #: MD00/3510/0001/1 Expiry date: 05/08/2011
WUYANG IRON & STEEL COMPANY LTD.
Wuhan
Steelmaking
Plates
150
100
40
100
Wugang City
Henan Province
P.N: 462500
Tel: +86 375 811 1230 Fax: +86 375 811 4006
Plates with specified through thickness properties in listed grades of normal and higher strength steels.
Certificate #: MD00/2044/0008/1 Expiry date: 14/07/2014
WUYANG IRON & STEEL COMPANY LTD.
Wuhan
Plates
Normal Strength
Higher Strength
A, B, D, E
FH32, FH36, FH40
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40
360FG, 410FG, 460FG, 490FG, 510FG
100
EAF/LRF/VD/Ingot
Ingots
ESR Ingots
Semi-finished Products
12
18
250
See notes
See notes
carbon, carbon-manganese
A, B, D, E
FH27S, FH32, FH36, FH40
AH27S, DH27S, DH40, EH27S, EH40
AH32, AH36, DH32, DH36, EH32, EH36
360AR, 410AR
360, 410
360FG, 410FG, 460FG, 490FG, 510FG
A, B
AH27S, AH32, AH36
250
80
50
60
80
20
60
80
14
14
100
50
100
Tel No. +86 375 8111230 Fax No. +86 375 8114006 Email to: wghangweijun@163.com
Plates with specified through thickness properties in listed grades of normal and higher strength steels
Certificate No. MD00/3714/0002/1
Expiry Date 14/07/2014
XINING SPECIAL STEEL CO., LTD.
Wuhan
Steelmaking
Semi-Finished
Bars
Tel: 0086 0971 529 9407 Fax: 0086 0971 529 9248
Email: wlyqh888@sina.com
Web: www.xntg.com
Certificate #: MD00/3093/0006/1 Expiry date: 11/06/2013
XINYU IRON & STEEL CO. LTD.
Wuhan
Steelmaking
Semi-Finished
Plates
Sections
Normal Strength
Higher Strength
1 Yejin Road
Xinyu City
Jiangxi Province 338001
Wuhan
Steelmaking
Semi-Finished
Plates
Page
20
As below
carbon, carbon-manganese, alloy
A, B, D, E
AH40, DH40, EH40, FH40
FH27S, FH32, FH36
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360FG, 410FG, 460FG, 490FG, 510FG
300
60
40
60
100
100
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Sections
Normal Strength
A, B
16
Higher Strength
16
Steelmaking
E.A.F./V.O.D./Con Cast
austenitic stainless
Semi-Finished
Blooms/Billets
220
Steelmaking
Semi-Finished
Bars
E.A.F. / Ingot
Ingots
Semi-finished Products
austenitic stainless
austenitic stainless
austenitic stainless
5
110
Steelmaking
Semi-Finished
IF/AOD/Ingot/ConCast
Ingots
Blooms/Billets
Billets
austenitic
austenitic
austenitic
austenitic
3
240
150
Steelmaking
As below
Plates
Normal Strength
A, B, D
38
Higher Strength
38
38
Nanjing
Qingdao
Shanghai Port
Yangjiabu,
Huzhou City,
Zhejiang Province
Tel No. +86 572 2350629 Fax No: +86 572 2351517
Email: wang _jianyong@163.com
Web : www.yongxingbxg.cn
Certificate No. MD00/3791/0001/1 Expiry date 07/06/2013
ZHEJIANG TSINGSHAN IRON & STEEL CO.LTD.
Ningbo
stainless steel
stainless
stainless steel
stainless
Tel No. 0086 578 6071 669 Fax No. 0086 578 6071 669
Email :tsingshanoffice@163.com
Web : www. zjqingshan.cn
Cert no. MD00/3673/0001/1 Expiry date: 26/08/2012
ZHONGPU (HANDAN) IRON AND STEEL CO.,
LTD.
Dalian
Yangyi Town
Wuan City
Hebei Province, 056305
Page
21
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Havana
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese
130
Steelmaking
Semi-Finished
Sections
Bars
Billets
Normal Strength
Normal Strength
150
180
210
14
60
Cuba
ACINOX LAS TUNAS
Circuvalante Norte Km. 3 1/2
CP75100
Las Tunas
Tel: +53 131 46801 Fax: +53 131 46317 Email: julio@acinoxtunas.co.cu
Certifcate: MD00/3698/0001/1 Expiry date: 02/11/2012
Czech Republic
ArcelorMittal Ostrava a.s.
Prague
Vratimovsk 689
707 02 Ostrava-Kuncice
Tel: +420 59 568 4213 Fax: +420 59 668 2275 Email: mailto:radim.prochacek@arcelormittal.com
Certificate #: MD00/1123/0008/1 Expiry date: 12/12/2013
EVRAZ VITKOVICE STEEL, a.s.
Prague
Steelmaking
Semi-Finished
Plates
Web http://www.arcelormittal.com/ostrava
Sections
Bars
Normal Strength
Higher Strength
As below
carbon, carbon-manganese
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360FG, 410FG, 460FG, 490FG, 510FG
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36
250
100
100
100
16
16
50
50
Tel: +420 59 595 5842 Fax: +420 59 595 7340 Email: mailto:miroslav.snajdr@VitkoviceSteel.com
Web: http://www.vitkovicesteel.com
Approved for plates with specified through thickness properties (Z35) in all grades up to 50 mm thickness.
Semi-finished products in carbon and carbon-Manganese steels with fine grain: slabs to 1580mm wide to 8000mm long for further processing for rolled products
Materials Quality Scheme Approved - MQS 039
Certificate #: MD00/1638/0013/1 Expiry date: 07/08/2013
PILSEN STEEL s.r.o.
Prague
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy
200
Bars
Structural
Machinery
300
300
Tylova 1/57
316 00 Plzen
Tel: +420 378 134 225 Fax: +420 378 132 058
Email: karel.rau@pilsensteel.cz
Web: www.pilsensteel.cz
Certificate # MD00/1383/0005/1 Expiry date: 24/03/2014
SOCHOROV VLCOVNA TZ, a.s.
Prague
272 01 Kladno-Drin
Tel No +420 558 536 065 Fax No. +420 558 534 926
Email vit.prochazka@trz.cz
Web www.trz.cz
Machinery grade bars with the maximum diameter of 300 mm produced from con-cast blooms may be accepted with a minimum rolling reduction of 3:1.
Certificate #: MD00/2955/0005/1 Expiry date: 21/02/2015
TRINECKE ZELEZARNY, a.s.
Prague
Steelmaking
Semi-Finished
Sections
Bars
B.O.S./Ingot/Con Cast
E.A.F./Ingot/Con Cast
Slabs
Bars
Normal Strength
Machinery
Chain Cable Stock
As below
As below
carbon, carbon-manganese
carbon, carbon-manganese
A
carbon, carbon-manganese, alloy
U1, U2
140
525
50
90
72
Prumyslova 1000
CZ-739 70 Trinec - Stare Mesto
Tel: +420 558 533 010 Fax: +420 558 533 306 Email: mailto:marie.antochova@trz.cz Web hppt://www.trz.cz
Approval for Slabs as semi finished products are for further processing for rolled products, nominal sizes are 240mm wide x 12000mm long to the above
maximum thickness.
Approval for Bars as semi finished products are for further processing for tube production, nominal length 1200mm to the above maximum diameter.
Certificate #: MD00/1562/0006/1 Inspection Due: 13/07/2013
Page
22
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Prague
Sections
Normal Strength
B, D
A
DH32, DH36
AH27S, AH32, AH36
Higher Strength
Univerzalni trat
Bezrucova 300
735 93 Bohumn
Tel: +42 (0) 596 082 097 or 558 533 897 Fax: +420 558 533 896 Email mailto:jan.rusz@trz.cz Web http://www.trz.cz
The approved sections are in the form of universal flats nominal widths 150 to 550mm to the maximum thicknesses shown above.
Mechanical testing is carried out by approved works TRINECKE ZELEZARNY A.S. Certificate ID No: MD00/1562.
Approval covers for heat treatment is carried out by approved works VITKOVICE HEAVY MACHINERY a.s.
Parent Company: TRINECKE ZELEZARNY a.s., Prumyslova 1000, CZ-739 70 Trinec-Stare Metso.
Certificate ID No : MD00/2020.
Certificate No. MD00/3056/0004/1 Expiry date: 14/02/2013
VITKOVICE HEAVY MACHINERY a.s.
Prague
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy
80
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
12
Plates
Normal Strength
E
A, B, D
EH32, EH36, EH36S
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
60
100
80
100
40
100
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
40
40
40
40
Ruska 2887/101
70602 Ostrava-Vitkovice
Prague
Metallurgical Plant
59171 Zdr nad Szavou
Tel: +420 566 643 998 Fax: +420 566 642 803
Email: mailto:antonin.tlusty@zdas.cz
Web:http://www.zdas.cz
Certificate #: MD00/1697/0004/1 Expiry date: 26/08/2014
Denmark
DANSTEEL A/S
Copenhagen
Higher Strength
Boiler & Pressure Vessel
Havnevej 33
DK-3300 Frederiksvrk
Copenhagen
Web:http://www.dansteel.dk
Sections
Normal
Higher
Normal
Higher
Bars
Strength
Strength
Strength
Strength
Havnevej 47
DK-3300
Frederiksvrk
Page
23
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Cairo
Plates
Normal Strength
A, B, D
Steelmaking
Plates
Hot Rolled Coil
As below
A
A
360FG, 410FG
A
As below
Slabs
austenitic stainless
Plates
Austenitic Stainless
12
Austenitic Stainless
12
Coil
Austenitic Stainless
Steelmaking
Semi-Finished
Bars
As below
carbon, carbon-manganese, alloy
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
carbon, carbon-manganese, alloy
alloy
carbon, carbon-manganese
100
Port Said
Sections
50
50
25
50
El Tebbin
Helwan
Cairo
Finland
OUTOKUMPU STAINLESS OY
Helsinki/Helsin Steelmaking
gfors
Semi-Finished
187
Terastie 1,
95490
Tornio
Turku/bo
Structural
Machinery
310
180
180
180
200
Terstehtaantie 1
FI-55100 IMATRA
Tel: +358 5 680 21 Fax: +358 5 680 2211 Email: mailto:heikki.hurmola@ovako.com Web:http://www.ovako.com
Semi-finished products in carbon, carbon-manganese and alloy steel with fine grain (element combinations as stated), blooms to 370 mm section, to 6000mm long
for further processing to rolled products
MQS Approved - Approval No. MQS 020
Certificate #: MD00/0751/0009/1 Expiry date: 06/01/2015
RUUKKI METALS OY
Turku/bo
Steelmaking
Plates
Page
Normal Strength
Higher Strength
24
As below
A, B, D, E
FH27S, FH32, FH36
AH40, DH40, DH42, EH40, EH42
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360, 410, 460, 490, 360FG, 410FG, 460FG, 490FG,
510FG
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
150
40
80
150
40
100
40
15
15
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
Raahe Steel Works
Rautaruukintie 155, PO Box 93
92101 Raahe
LR Office
Product
Category
Grade
Tel +358 20 5911 Mob +358 40 54 90257 Fax +358 20 5923527 Email:mailto:lassi.myllykoski@ruukki.com Web: http://www.ruukki.com
Specified through thickness properties for up to 100 mm thickness.
MQS Approved - Approval No. MQS 007
Certificate #: MD00/1233/0008/1 Expiry date: 11/12/2013
France
AKERS FRANCE
Lyon
Steelmaking
Semi-Finished
EAF/LRF/VD/Ingot
Ingots
70
USINE DE THIONVILLE
Chemin du Leidt
B.P. 10200
57104 Thionville Cedex
Lyon
Plates
Austenitic Stainless
Lyon
Steelmaking
Plates
Hot Rolled Coil
E.A.F. / Ingot
Fe-Ni alloys
Fe-Ni alloys
austenitic stainless
Fe-36Ni*
Fe-36Ni*
8
8
*Cold and hot rolled strip up to 8mm in INVAR/M93 grade (Fe-Ni36) for approved applications.
Tel: +33 3 86 21 31 23 Fax: +33 3 86 21 31 07 Email:mailto:pascal.france@arcelormittal.com Web:http://www.imphyalloys.com
Marseille
Steelmaking
Hot Rolled Coil
As below
A, B, D
AH32, AH36, DH32, DH36, EH36
460FG, 490FG, 510FG
360AR, 410AR
Steelmaking
Semi-Finished
carbon, carbon-manganese
carbon, carbon-manganese
247
E.A.F./Ingot/Con Cast
Blooms/Billets
Structural
Machinery
Chain Cable Stock
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
U3
U1, U2
400
310
310
105
130
E.A.F. / Ingot
Blooms
Billets
Structural
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
400
205
325
16
13
13
16
Mditerrane Fos-sur-Mer
13776 Fos-Sur-Mer
CEDEX
Tel: +33 (0) 4 4247 3314 FAx +33 (0) 4 4247 1720 Email
mailto: florence.sixdeniers@arcelormittal.com
Certificate #: MD00/3803/00014/1 Expiry date: 25/11/2012
ARCELORMITTAL ATLANTIQUE LORRAINE
Dunkerque
ARCELOR MITTAL
Site de Dunkerque
BP 2508
59381 Dunkerque Cedex 1
Tel: +33 328 293220 Fax: +33 328 296974 Email mailto:bernard.debiesme@arcelormittal.com
Certificate #: MD00/2232/0005/1 Expiry date: 09/06/2013
ASCOMETAL
Dunkerque
Steelmaking
Semi-Finished
Bars
Usine de Dunes
BP 41
59941 Dunkerque
Cedex 2
Marseille
Steelmaking
Semi-Finished
Bars
Usine de Fos-sur-Mer
BP 30
13771 Fos-sur-Mer
Tel: (33) 442 479250 Fax: (33) 442 479014 Email : mailto:e.leroy@ascometal.lucchini.com
Certificate No. MD00/0118/0005/1 Expiry date: 04/09/2012
Page
25
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Lyon
Steelmaking
Semi-Finished
E.A.F. / Ingot
Blooms/Billets
Bars
Structural
As below
carbon, carbon-manganese, alloy, austenitic
stainless steel
carbon, carbon-manganese, alloy, austenitic
stainless
carbon, carbon-manganese, alloy, austenitic
stainless
Machinery
Tel: +33 4 7367 3128 Fax: +33 4 7367 3174 Email: mailto:frederic.folio@eramet-aubertduval.com
web: http://www.aubertduval.com
Certificate #: MD00/0127/0005/1 Expiry date: 05/03/2013
CELSA FRANCE
Bilbao
Steelmaking
Semi-Finished
As below
Normal Strength, Higher Strength
160
Dunkerque
Plates
Normal Strength
Higher Strength
E
A, B, D
AH40, DH40, EH40, FH40
FH27S, FH32, FH36
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
460FG, 490FG, 510FG
360FG, 410FG
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
80
100
42
50
75
50
100
50
Dunkerque Mill
BP 6317
59379 Dunkerque Cedex 1
Lyon
Steelmaking
Plates
E.A.F. / Ingot
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Ferritic Low Temperature
Austenitic Stainless
As below
A, B, D, E
FH32, FH36
AH32, AH36, DH32, DH36, EH32, EH36
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,
LTEH36, LTFH32, LTFH36, 1.5Ni, 3.5Ni, 5Ni,
9Ni
304L, 316L
150
50
150
100
50
50
56 rue Clemenceau BP 56
71202 LE CREUSOT CEDEX
Lyon
Steelmaking
Plates
E.A.F. / Ingot
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Ferritic Low Temperature
carbon, carbon-manganese
A
FH32, FH36
AH32, AH36, DH32, DH36, EH32, EH36
360AR, 410AR
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,
LTEH36, LTFH32, LTFH36, 1.5Ni, 3.5Ni, 5Ni,
9Ni
400
50
400
40
100
50
ARCELOR MITTAL
Site de Chateauneuf
BP 368 - Chateauneuf
42803 RIVE DE GIER
Tel: +33 4 77 75 21 12
Fax: +33 4 77 75 20 03
Email: mailto:jean-philippe.baron@arcelormittal.com
Page
26
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Lyon
Steelmaking
Semi-Finished
Sections
Bars
As below
carbon, carbon-manganese
A
A
Higher Strength
AH32, AH36
200
13
30
Tel +33 (0)3 2714 2270 Fax +33 (0)3 2714 2010 Email: mailto:e.cotton@lme.fr
Certificate #: MD00/1395/0007/1 Expiry date: 20/10/2013
LORRAINE TUBES GRUPO CONDESA
Lyon
Sections
16
Lexy-France
Usine de RETTEL
BP 9
57480 Sierk-les-bains
Lyon
Steelmaking
Semi-Finished
Sections
Bars
E.A.F./A.O.D./Con Cast
Billets
Austenitic Stainless
Duplex Stainless
Austenitic Stainless
Duplex Stainless
Machinery
As below
As below
304L, 316L, 321
UNS S31803
304L, 316L, 321
UNS S31803
austenitic stainless, duplex stainless, martensitic
stainless*
205
32
32
130
130
95
Germany
ARCELORMITTAL BREMEN GmbH
Bremen
Steelmaking
Semi-Finished
Hot Rolled Coil
As below
As below
A, B, D
360, 410, 360FG, 410FG
220
20
20
Steelmaking
Semi-Finished
carbon, carbon-manganese
carbon, carbon-manganese
carbon, carbon-manganese
225
300
Carl-Benz- Strae 30
D-28237 Bremen
Tel +49 421 648 2306 Fax +49 412 648 3150
Email: mailto:ralf.bruns@arcelormittal.com
Web: http://www.arcelormittal.com/bremen
Certificate No. MD00/0857/0005/1 Expiry date: 19/10/2013
ARCELORMITTAL EISENHTTENSTADT GMBH
Dortmund
Werkstrae 1
D-15872 Eisenhttenstadt
Tel +49 3364 3782 05 Fax +49 3364 3781 97 Email: mailto:frank.schadow@arcelormittal.com Web http://www.arcelormittal-ehst.com
Continuously cast slab up to 250 mm thickness and cast bloom up to 300 mm thickness.
Certificate No. MD00/0450/0005/1 Expiry date: 22/01/2013
ARCELORMITTALAL RUHRORT GmbH
Dortmund
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
Steelmaking
Plates
B.O.S./Ingot/Con Cast
Normal Strength
Higher Strength
As below
A, B, D, E
FH32, FH36
AH40, DH40, EH40
AH32, AH36, DH32, EH32
DH36, EH36
360FG, 410FG, 460FG, 490FG, 510FG
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,
LTEH36, LTFH32, LTFH36, 5Ni
385
130
Vohwinkelstrae 107
D-47137 Duisburg
Tel 0049 (0) 203 / 52 66 180 Fax 0049 (0) 203 / 606 66 332
email: hans-dieter.drippe@arcelormittal.com
Web http://www.arcelormittal.com
Certificate Number: MD00/3631/0002/1 Expiry date: 25/07/2014
Aktiengesellschaft der Dillinger Httenwerke
Stuttgart
170
50
100
170
220
100
50
Httenwerkstrasse
Postfach 1580
D-66748 Dillingen / Saar
Tel: +49 6381 474735 Fax: +49 6831 473689 Email: mailto:frank.schikofski@dillinger.biz
All plates with specified through thickness properties.
Certificate No. MD00/0361/00012/1 Expiry date: 20/09/2014
Page
Web:http://www.dillinger.de
27
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Dortmund
Steelmaking
Semi-Finished
Niederdarmer Strae 5
D-49811 Lingen
Tel: +49 591 80004 800 Fax: +49 591 80004 460 Email to: gerd.lindenschmidt@benteler.de
Web: http://www.benteler.de
Certificate No. MD00/1805/0006/1 Expiry date: 11/10/2014
Steelmaking and semi-finished slabs, blooms and billets intended for plates, forgings and tubes.
Semi-finished products in carbon, carbon-manganese and alloy steel: slabs to 670mm wide, to 11,500mm long to 12.8 tonnes and blooms/billets of dimensions
300mm x 230mm or 310mm round of maximum length 12,800mm
BGH EDELSTAHL FREITAL GmbH
Dortmund
Steelmaking
Semi-Finished
E.A.F./Ingot/Con Cast
Ingots
As below
alloy, austenitic stainless, duplex stainless,
stainless steels
stainless steel
As below
alloy, austenitic stainless, duplex stainless,
martensitic stainless*
Bars
Slabs
Billets
Machinery
Semi-Finished
Ingots
Steelmaking
E.A.F. / Ingot
Bars
Semi-finished Products
Machinery
12
230
120
165
Am Stahlwerk 1
D-01705 Freital
Dortmund
32
Industriestrae 9,
D-57076
Siegen
Tel No. +49 (0)271 701- 341 Fax No. +49 (0) 271 701- 300
Email peter.hoffmann@bgh.de
Web www.bgh.de
Certificate No MD00/3767/0001/1
Expiry date: 01/04/2013
BUDERUS EDELSTAHL GmbH
Dortmund
200
190
Buderusstrae 25
D-35573 Wetzlar
Tel: +49 (0)6441 374 2505 Fax: +49 (0)6441 374 2681 Email: mailto:lothar.schaefer@buderus-steel.com
Certificate No. MD00/0257/0008/1 Expiry date: 08/07/2014
DEUTSCHE EDELSTAHLWERKE GMBH
Dortmund
Steelmaking
Web: http://www.buderus-steel.com
Bars
Machinery
As below
As below
carbon, carbon-manganese, alloy, austenitic
stainless
carbon, carbon-manganese, alloy, austenitic
stainless, duplex stainless, martensitic stainless*
80
80
Works Siegen
Obere Kaiserstrae
D-57078 Siegen
Tel: +49 (0)271 808 26 94 Fax: +49 (0)271 808 25 01 Email: mailto:andreas.prause@dew-stahl.com Web: http://www.dew-stahl.com
Certificate No. MD00/0901/0008/1 Expiry date: 12/07/2014
DEUTSCHE EDELSTAHLWERKE GMBH
Dortmund
Steelmaking
Bars
Structural
Machinery
As below
As below
carbon, carbon-manganese, alloy, austenitic
stainless
alloy, austenitic stainless
alloy, austenitic stainless, duplex stainless,
martensitic stainless*
250
250
250
Works Witten
Auestrae 4
D-58452 Witten
Tel: +49 (0) 2302 294 131 Fax: +49 (0) 2302 294 662 Email:mailto:heinz.hirsch@dew-stahl.com Web:http://www.dew-stahl.com
Certificate No. MD00/2075/0010/1 Expiry date: 21/01/2013
ELEKTROSTAHLWERKE GRDITZ GmbH
Dortmund
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy, austenitic
stainless
84
Riesaer Strae 1
D-01609 Grditz
Tel: +49 35263 62-611 Fax: +49 35263 62-622 Email: mailto:Ilvia.Polchow@stahl-groeditz.de Web:http://www.stahl-groeditz.de
Certificate No. MD00/2880/0005/1 Expiry date: 12/04/2014
Page
28
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
GEORGSMARIENHTTE GmbH
Dortmund
Steelmaking
Semi-Finished
E.A.F./Ingot/Con Cast
Ingots
Blooms
Normal Strength
Higher Strength
Structural
Chain Cable Stock
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
A, B, D, E
AH32, AH36, DH32, DH36, EH32
alloy
carbon, carbon-manganese
U1, U2, U3, R3
Steelmaking
As below
Bars
Structural
100
Machinery
50
U1, U2
73
Bars
Neue Httenstrae 1
D-49124 Georgsmarienhtte
Dortmund
Wolfgang-Kntscher-Strae 18
D-16761 Hennigsdorf
Tel: +49 (0)3302 806-0 Fax: +49 (0)3302 806-211 Email: mailto:labor.hes@rivagroup.com
Certificate No. MD00/0665/0007/1 Expiry date: 01/07/2014
HOESCH SCHWERTER PROFILE GmbH
Dortmund
Web: http://www.rivagroup.com
Sections
Normal Strength
50
Steelmaking
Semi-Finished
Eisenindustriestrae 1
D-58239 Schwerte
Dortmund
260
406
Huckingen Works
Ehinger Strasse 200
D-47259 Duisburg-Huckingen
Tel: +49 (0)203 999-01 Fax: +49 (0)203 999-4411 Email: mailto:michael.ninnemann@hkm.de
Certificate No. MD00/0730/0006/1 Expiry date: 07/02/2015
ILSENBURGER GROBBLECH GmbH
Dortmund
Plates
Web: http://www.hkm.de
Normal Strength
Austenitic Stainless
B, D, E
A
AH40, DH40, EH40, FH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36, FH27S, FH32, FH36
360AR, 410AR, 460AR
360, 410, 460, 490, 360FG, 410FG, 460FG, 490FG,
510FG
LTAH40, LTDH40, LTEH40, 1.5Ni, 3.5Ni, 5Ni,
9Ni
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
316L
As below
A, B
carbon, carbon-manganese, alloy
Higher Strength
85
150
100
120
40
100
50
120
80
Veckenstedter Weg
D-38871 Ilsenburg
Stuttgart
Steelmaking
Bars
100
90
Meitingen-Herbertshofen
Industriestrasse 1
D-86405 Meitingen
Tel: +49 (0) 8271/82-325 Fax: +49 (0) 8271/82-405 Email:mailto:christian.herrmann@lech-stahlwerke.de Web: http://www.lech-stahlwerke.de
Certificate No. MD00/0921/0005/1 Expiry date: 03/11/2012
Page
29
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Dortmund
Steelmaking
Sections
As below
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
AH27S, DH27S, EH27S
460FG, 490FG, 510FG
360FG, 410FG
250
120
250
120
150
Gerhard-Lucas-Meyer Str. 10
D-31226 Peine
Tel: +49 5171 91 9321 Fax: +49 5171 91 9373 Email: Schernich.O@salzgitter-ag.de Website: www.peinertraeger.de
Certificate No. MD00/3075/0003/1 Expiry date: 14/05/2013
REINER BRACH GmbH & Co. KG
Bremen
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Wilhelm-Karmann-Strae 5
D-28237 Bremen
Tel: +49 421 985 08-140 Fax: +49 421 985 08-149
Email mailto:frank-santuari@brach.de
Web:http://www.brach.de
Certificate No. MD00/2631/0006/1 Expiry date: 01/01/2015
SAARSTAHL AG
Stuttgart
Bars
Normal Strength
Chain Cable Stock
A
U1, U2, U3
40
40
Works Neunkirchen
D-66511 Neunkirchen
Tel: +49 6821 168644 Fax: +49 6898 1054293 Email: mailto:hanswerner.muller@saarstahl.com
Certificate No. MD00/1286/0006/1 Expiry date: 10/08/2014
SAARSTAHL AG
Stuttgart
Steelmaking
Semi-Finished
Bars
Web:http://www.saarstahl.com
As below
Normal Strength
A
U1, U2, U3
265
160
100
Works Vlklingen
Bismarckstrasse 57 - 59
D-66330 Vlklingen
Tel: +49 (0) 6898 104 293 Fax: +49 (0) 6898 105 4293 Email: mailto:mark.bleymehl@saarstahl.com Web:http://www.saarstahl.com
Certificate Number: MD00/1931/0006/1 Expiry: 10/08/2014
SALZGITTER FLACHSTAHL GmbH
Dortmund
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese
350
D-38239 Salzgitter,
Eisenhttenstrasse 99,
Dortmund
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Austenitic Stainless
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
304L, 316L
50
50
40
50
50
Wiesenstrae 36
D-45473 Mlheim an der Ruhr
Tel: +49 (0)208 458 458 4510 Fax: +49 (0)208 458 1872 Email: mailto:info.service@smgb.de
Certificate No. MD00/1806/0006/1 Expiry date: 28/04/2014
STAHLWERK BOUS GMBH
Stuttgart
Steelmaking
Semi-Finished
Web: http://www.smgb.de
E.A.F. / Ingot
Ingots
60
Tel: +49 6834 81286 Fax: +49 6834 81586 Email: mailto:mmuth@stahlwerk-bous.de
Ingots up to 60 tonne and 2300 mm dia.
Certificate #: MD00/1249/0005/1 Expiry date: 21/08/2013
STAHLWERK THRINGEN GMBH
Dortmund
Steelmaking
Sections
Web http://www.stahlwerk-bous.de
As below
A, B
AH32, AH36, DH32, DH36
25
25
Kronacher Strae 6
D-07333 Unterwellenborn
Page
30
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Dortmund
Steelmaking
Bars
E.A.F. / Ingot
Structural
As below
carbon, carbon-manganese, alloy, austenitic
stainless
Kaiserau 2
D-51789 Lindlar
Tel: +49 (0)22 62232 Fax: +49 (0)22 668232 Email: mailto:a.hagen@schmidt-clemens.de Web http://www.schmidt-clemens.de
Certificate #: MD00/1319/0006/1 Expiry date: 12/10/2010
THYSSENKRUPP STEEL EUROPE AG
Dortmund
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Normal Strength
Higher Strength
Boiler and Pressure Vessel
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
A, B, D, E
AH27S, DH27S, AH32, DH32, AH36, DH36
410 FG, 460 FG, 360 FG, 360, 410, 490FG, 510FG
20
20
20
20
20
20
Works Bochum
Kaiser-Wilhelm-Strae 100
D-47166 Duisburg
Tel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:roland.riesbeck@thyssenkrupp.com
Certificate No. MD00/0899/0007/1 Expiry date: 24/08/2014
THYSSENKRUPP STEEL EUROPE AG
Dortmund
Steelmaking
Semi-Finished
Hot Rolled Coil
Web: http://www.thyssenkrupp-stahl.com
As below
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
255
20
20
20
Works Beeckerwerth
Tel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:joachim.gottlieb@thyssenkrupp.com
Certificate # MD00/1823/0007/1 Expiry date: 19/08/2014
THYSSENKRUPP STEEL EUROPE AG
Dortmund
Web: http://www.thyssenkrupp-stahl.com
Steelmaking
Hot Rolled Coil
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
Plates
Normal Strength
Higher Strength
A, B, D, E
FH27S, FH32, FH36
AH40, DH40, EH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
UNS S31803
A, B, D, E
AH27S, DH27S, AH32, DH32, AH36, DH36,
EH27S, EH32, EH36
360 FG, 460 FG, 410 FG, 360, 410, 490FG, 510FG
20
20
20
Works Bruckhausen
Dortmund
Duplex Stainless
Normal Strength
Higher Strength
Boiler and Pressure Vessel
150
50
60
100
40
100
50
35
20
20
20
Works Duisburg-Sd
Tel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:joachim.gottlieb@thyssenkrupp.com
Specified through thickness properties on all normal and higher strength steel grade plates.
Certificate No. MD00/1825/0008/1 Expiry date: 19/08/2014
ThyssenKrupp Nirosta GmbH
Dortmund
Steelmaking
Semi-Finished
Web: http://www.thyssenkrupp-stahl.com
E.A.F./Ingot/Con Cast
Ingots
Slabs
As below
austenitic stainless
austenitic stainless
16
240
Works Krefeld
Oberschlesienstrae 16
D-47807 Krefeld
Tel: +49 (0) 211 7107 562 Fax: +49 (0) 211 7107 376 Email: mailto:thomas.seifert@thyssenkrupp.com Web: http://www.thyssenkrupp.com
Ingots as semi finished products nominal dimensions 1700 x 690xmm & nominal height 2600mm to the above maximum weight and slabs as semi finished
products nominal width 1500mm & nominal length 10000mm, are approved for further processing for rolled products.
Certificate Number: MD00/1852/0006/1 Expiry date: 16/11/2014
Page
31
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Vienna
Steelmaking
Plates
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 360FG, 410FG, 460FG, 490FG,
510FG
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
Hungary
ISD DUNAFERR DUNAI VASM ZRT
Normal Strength
Higher Strength
Boiler & Pressure Vessel
13
13
13
13
13
13
2400 Dunajvros
Vasm Tr 1-3
Tel: +36 25 581 044 Fax: +36 25 583 776 Email: mailto:zeberhardt@rt.dunaferr.hu Web: http://www.dunaferr.hu
Certificate No. MD00/0424/0006/1 Expiry date: 01/11/2010
ISD DUNAFERR Zrt. Lrinci Meleghengerm
Vienna
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
B, D, E
A
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360, 410
360FG, 410FG, 460FG, 490FG, 510FG
35
100
60
35
60
Hengersor u. 38
1184 Budapest
India
ARCVAC FORGECAST LTD
Calcutta
Steelmaking
Semi-Finished
EAF/LRF/VD/Ingot
Ingots
Steelmaking
Semi-Finished
Hot Rolled Coil
As below
Normal strength, Higher Strength
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36
360FG, 410FG
10
Mumbai
260
20
20
20
Tel: +91 261 6683139 Fax: +91 261 6683747 Email mailto:sravinarayana.bhat@essar.com Web http://www.essar.com
Slabs as semi finished products nominal maximum width 2040mm x nominal maximum length 4900mm to the above maximum thickness are approved for
further processing for rolled products.
Certificate No. MD00/2091/0007/1 Expiry date: 07/06/2012
ESSAR STEEL INDIA LTD.
Plate Mill Division
Mumbai
Plates
Normal Strength
A, B, D
70
Tel: +91 261 668 3291 or 6739 Fax: +91 261 668 3747 Email mailto:sravinarayana.bhat@essar.com or rudrapatnam.balasubramaniam@essar.com Web
http://www.essar.com
Plates in the normalizing rolled supply condition are restricted to a maximum width of 4550mm.
Certificate No. MD00/3979/0001/1 Expiry date: 17/01/2015
FACOR STEELS LTD
New Delhi
Steelmaking
E.A.F./A.O.D./Con Cast
E.A.F./V.O.D./Con Cast
Boiler & Pressure Vessels
Bars
Austenitic Stainless
Duplex Stainless
Chain Cable Stock
As below
austenitic stainless, duplex stainless
11CrMo91
13CrMo45
410AR, 460AR, 490
304L, 316L
UNS S31803
U3
U1, U2
45
50
63
100
122
56
80
Page
32
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Pune
Steelmaking
Semi-Finished
Morgaon Road
Jejuri 412 303
Purandara, Pune
Maharashtra
Fax: +91-020-26630779
Expiry date: 24/08/2013
New Delhi
Steelmaking
Plates
Web
http://www.ismt.co.in
B.O.S./E.A.F./Con Cast
Normal Strength
Higher Strength
Boiler & Pressure Vessel
As Below
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR, 460AR, 360, 410, 460, 490, 360FG,
410FG, 460FG, 490FG
E.A.F./A.O.D./Con Cast
E.A.F./V.O.D./Con Cast
Slabs
Austenitic Stainless
austenitic stainless
austenitic stainless
As below
304L, 316L, 317L, 321, 347
80
80
80
Raigarh
Post Box No.16
Kharsia Road
Raigarh 496001 Chattisgarh
Tel: +91 7762 227001 10 Fax: +91 7762 227021/22 Email to rksaini@jspl.com
Certificate No. MD00/3542/0002/1 Expiry date: 02/08/2014
JSL STAINLESS LTD.
Yamunanagar
Steelmaking
Semi-Finished
Plates
160
53
Tel: +91 1662 222471 - 83 ext 2336 Email: mailto:hsr.manishmittal@jslhsr.com Web Page www.jindalstainless.com
Certificate No. MD00/3110/0003/1 Expiry date: 22/10/2013
JSW STEEL LIMITED
Mumbai
Steelmaking
220
Vidyanagar Works
P.O. Vidyanagar
583 275 Toranagallu
Dist Bellary
Karnataka
Tel: +91 8395 250 120 Fax: +91 8395 250 114 Email: devasish.mishra@jsw.in Web: www.jsw.in
Certificate No. MD00/3564/0001/1 Expiry date: 10/02/2012
KALYANI CARPENTER SPECIAL STEELS LTD.
Pune
Steelmaking
Bars
E.A.F./Ingot/Con Cast
Semi-finished Products
Structural
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
250
150
Mundhwa
Pune 411 036
Mumbai
Web: http://www.kalyanicarpenter.com
Steelmaking
Semi-Finished
E.A.F. / Ingot
Blooms/Billets
Sections
Bars
Normal Strength
Normal Strength
As below
alloy, austenitic stainless steel
carbon, carbon-manganese
A
A
340
50
200
Khopoli Works
Jagdish Nagar
Khopoli
Dist. Raigad
Maharashtra 410 216
Tel: +91 952192 263318 (263347) Fax: +91 952192 263582 (263076) Email mailto:drsbsarkar@muscoindia.com
Certificate No. MD00/0971/0007/1 Expiry date: 17/07/2012
STEEL AUTHORITY OF INDIA LTD.
Bhilai
Steelmaking
Plates
As below
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
460FG, 490FG, 510FG
360AR, 410AR, 360, 410
360FG, 410FG
75
50
50
63
75
Page
33
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Calcutta
Steelmaking
Plates
As below
A, B
360, 410, 360FG, 410FG
360AR, 410AR
Steelmaking
Plates
As below
A
360AR, 410AR
A
50
50
12
Calcutta
Tel: +91 (33) 22889251 Fax: +91 (33) 22887255/22881396 Email mailto:rakesh@itd.tatasteel.com Web http://www.tata.com
Certificate No. MD00/1489/0005/1 Expiry date:16/02/2012
UTTAR PRADESH STEELS
Village Nara
P.O. Mansurpur
Dist. Muzaffarnagar - 251 203
New Delhi
Steelmaking
E.A.F. / Ingot
alloy
Steelmaking
Semi-Finished
IF/AOD/Ingot/ConCast
Blooms/Billets
Uttar Pradesh
Mumbai
300
Tel: +91 2525 261514 Fax: +91 2525 260159 Email mailto:quality@viraj.com Web: http://www.viraj.com
Billets and blooms as semi-finished products to the above maximum thickness, nominal 300mm wide x nominal 9000mm long are approved for further
processing for forged products.
Certificate Number: MD00/2935/0004/1 Expiry date: 08/12/2014
Welspun Corp Limited
Mumbai
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
A, B, D
AH27S, AH32, DH27S, DH32
460FG, 490FG
360FG, 410FG
50
25
25
35
Tel: +91 2836 661728 - 4114 Fax: +91 2836 664141 Email: lakshminarasimham_b@welspun.com Web: http://www.welspuncorp.com
Certificate Number: MD00/3887/0001/1 Expiry date: 31/05/2011
Indonesia
PT. GUNAWAN DIANJAYA STEEL
Jakarta
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
B, D
A
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR
25
40
40
25
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Normal Strength
Higher Strength
Boiler & Pressure Vessel
A, B
AH36, AH40, DH36, DH40, EH36, EH40
360AR, 410AR
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR
50
50
40
16
14
16
Jakarta
Plates
Page
34
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Surabaya
Plates
Normal Strength
A, B
As below
A
25
Jl Margomulyo No. 4
Tandes
Surabaya 80186
Jakarta
Steelmaking
Plates
Tel: +62 254 371047 Fax: +62 254 372725 Email: mailto:marsidon.s@krakatausteel.com
Certificate No. MD00/1183/0006/1 Expiry date: 02/02/2012
Web: http://www.krakatausteel.com
Italy
A.B.S. Acciaierie Bertoli Safau S.p.A.
Trieste
Steelmaking
Bars
E.A.F./Ingot/Con Cast
Semi-finished Products
Structural
Machinery
Chain Cable Stock
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
U1, U2, U3
170
170
170
78
100
180
Via Buttrio, 28
33050 Pozzuolo del Friuli (UD)
Tel: +39 (0) 432 613 211 Fax: +39 (0) 432 613 249 E-mail: mailto:m.graffi@absacciai.it Web: http://www.absacciai.it
Certificate No. MD00/0019/0007/1 Expiry date: 15/06/2014
ACCIAIERIA DI RUBIERA S.p.A.
Ravenna
Steelmaking
Semi-Finished
E.A.F./Ingot/Con Cast
Ingots
Billets
Tel: +39 0522 997209 Fax: +39 0522 840040 Email: mailto:qa@acciaieriadirubiera.it
Web http://www.acciaieriadirubiera.com
Address for orders: Acciaieria di Rubiera S.p.A. , Via San Cataldo, 115, 41100 Modena, Italy.
Certificate No. MD00/0038/0005/1 Expiry date: 08/03/2013
ACCIAIERIA FONDERIA CIVIDALE S.P.A.
Trieste
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
35
Steel types carbon, carbon-manganese and alloy cover the supply of ingots for processing into forgings according to the Society's Rules for the Manufacture,
Testing and Certification of Materials, Chapter 5. The final processing mill is responsible for ordering steel which complies with their approved chemical
composition and enables them to achieve the required mechanical properties
Tel +39 432 706922 Fax +39 432 706920
Email:mailto:afcspa@afcspa.com
Web www.cividalespa.com
Certificate No. MD00/3149/0002/1 Expiry date: 04/04/2011
ACCIAIERIE VALBRUNA S.P.A.
Venice
Steelmaking
Semi-Finished
E.A.F./Ingot/Con Cast
Ingots
Billets
Bars
Machinery
As below
carbon, carbon-manganese, alloy, austenitic
stainless, duplex stainless
carbon, carbon-manganese, alloy, austenitic
stainless, duplex stainless
austenitic stainless, precipitation hardened
stainless*, martensitic stainless*
duplex stainless
10
220
155
205
Tel: +39 0444 968211 Fax: +39 0444 968182 Email:mailto:quality@valbruna.it Web:http://www.acciaierie-valbruna.com
* Accepted for approved applications
Approval for Precipitation Hardened Stainless Machinery Bar is for Grade 17.4 PH, approval for Martensitic Stainless Machinery Bar is for Grade 431 and Grade
1.4418 Quenched and Tempered.
Duplex Stainless Steel bars are not approved for use in welded construction, and weld repair is not permitted.
Approval of Con cast material is for the production of Austenitic Stainless Steels only.
Ingots as semi finished products nominal maximum dimensions 600mm x 530mm x 2060mm to the above maximum weight are accepted for further processing
for rolled products and forgings.
Billets as semi finished products nominal maximum width 220mm x nominal maximum length 6500mm to the above maximum thickness are accepted for
further processing for rolled products and forgings.
Certificate No. MD00/0041/0006/1 Expiry date: 02/06/2014
ACCIAIERIE VALBRUNA S.P.A.
Venice
Steelmaking
E.A.F./Ingot/Con Cast
A.O.D./Ingot/Con Cast
Machinery
Bars
Page
35
As below
as below
austenitic stainless, duplex stainless,
precipitation hardened stainless*, martensitic
stainless*
73
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Steelmaking
Bars
Semi-finished Products
Structural
Machinery
carbon, carbon-manganese,
AH36, DH32, DH36
carbon, carbon-manganese,
carbon, carbon-manganese,
carbon, carbon-manganese,
Via A Volta 4
39100 Bolzano
39100 Bolzano
Venice
alloy, A, B, D, AH32,
alloy
alloy
alloy
120
170
120
Camin Works
Riviera Francia, 9
35020 Camin (Padova)
Tel +39 (0)49 8282 820 Fax +39 (0)49 8282 666 Email: mailto:commercial.dep@acciaierievenete.com Web: http://www.acciaierievenete.com
Certificate No. MD00/0042/0005/1 Expiry date: 27/03/2012
AFV ACCIAIERIE BELTRAME S.p.A.
Venice
Steelmaking
Sections
As below
A, B, D, E
AH32, AH36, DH32, DH36
20
20
Bars
Normal Strength
Higher Strength
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36
40
40
Sections
Normal Strength
Higher Strength
A, B, D
AH32, AH36, DH32, DH36
8
8
Fabricated Sections
Normal Strength
Higher Strength
A, B, D
AH32, AH36, DH32, DH36
22
22
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
65
A, B, D
AH32, AH36, DH32, DH36
22
22
Venice
Stabilimento di Marghera
Via del Commercio, 15
30175 Marghera (VE)
Viareggio
Trieste
Brescia
Unipersonale
Via Seriola no. 122
25035 Ospitaletto
Brescia
Trieste
Email: mailto:Info@aso.it
Fabricated Sections
Web: http://www.aso.it
Normal Strength
Higher Strength
Via Tessere 9
33070 - Polcenigo (PN)
Tel: +39 (0)434 748822 Fax: +39 (0)434 749139 Email mailto:stab_polcenigo@cimolai.com Web http://www.cimolai.com
Certificate No. MD00/2617/0005/1 Expiry date: 01/12/2011
COGNE ACCIAI SPECIALI S.p.a
Milan
Steelmaking
Semi-Finished
4
160
270
220
Via Paravera,16
11100 AOSTA
Tel No: +39 165 3021 Fax no: +39 165 302423
Email: info@cogne.com
Web site: www.cogne.com
Certificate No.MD00/3809/0001/1 Expiry date 14/07/2013
Page
36
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
EUROGROUP S.p.A.
Trieste
Fabricated Sections
Normal Strength
Higher Strength
A, D
AH36, DH36
Tel: +39 481 495111 Fax: +39 481 495112 Email: eurogroup@eurogroupspa.com Web: http://www.eurogroupspa.com
Certificate No. MD00/2781/0004/1 Expiry date: 19/02/2013
EVRAZ PALINI E BERTOLI S.P.A.
Trieste
Plates
Normal Strength
Higher Strength
A
AH32, AH36
30
30
Fabricated Sections
Normal Strength
Higher Strength
A
AH36, DH36, EH36
20
20
Steelmaking
Plates
Normal Strength
Higher Strength
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
A
AH27S, AH32, AH36
Genoa
Via Castelgazzo 11
Novi Ligure (AL)
80
80
10
10
Taranto Works
Via Appia KM 648
Taranto 74100
Brescia
Steelmaking
E.A.F. / Ingot
Tel: +39 035 963535 Fax: +39 035 963488 Email: mailto:s.cantini@lucchiniRS.it
Certificate No. MD00/0949/0007/1 Expiry date: 19/03/2015
METINVEST TRAMETAL S.p.A.
Trieste
Web: http://www.lucchiniRS.it
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360FG, 410FG, 460FG, 490FG, 510FG
60
60
60
Tel: +39 010 57 62911 Fax: +39 010 57 62990 Email:mailto:rre@trametal.it Web:http://www.trametal.it
Certificate No. MD00/2004/0006/1 Expiry date: 02/08/2014
NLMK VERONA
Venice
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese
32
Tel: +39 045 699 7900 Fax: +39 045 699 7901 email: verona@eu.nlmk.com Web: http://www.eu.nlmk.com/verona/
Ingots as semi finished products are approved for further processing for forgings to the above maximum weight. Round and Polygon ingots to nominal
maximum dimensions of 1200mm diameter x 4750mm length, oblong ingots to nominal maximum dimensions 970mm x 870mm x 2050mm.
Certificate Number MD00/3985/0001/1 Expiry date: 31/01/2015
OFFICINE NORD EST S.r.l
Trieste
Fabricated Sections
Normal Strength
Higher Strength
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
Normal Strength
Higher Strength
A, B, D
AH32, AH36, DH32, DH36
50
50
Tel: +39 (0)434 919091 Fax: +39 (0)434 918646 Email to: accs_saquirino@cimolai.com
Certificate No. MD00/2626/0006/1 Expiry date: 07/12/2014
OLIFER-ACP S.P.A.
Brescia
Sections
8
8
Tel +39 365 826088 Fax +39 365 860727 Email: mailto:olifer@mail.olifer.com Web:http://www.olifer.com
Certificate No. MD00/1147/0007/1 Expiry date: 31/03/2015
Page
37
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
OLIFER-ACP S.P.A.
Brescia
Steelmaking
Semi-Finished
E.A.F./Ingot/Con Cast
Ingots
Blooms/Billets
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese
Fabricated Sections
Normal Strength
Higher Strength
A
AH32, AH36
25
25
Higher Strength
30
54
120
STEELMAKING
Bergamo Works
Loc. Motta Alta 14
Cividate Al Piano
Naples
Sections
Tel: +39 342 674125 Fax: +39 342 670400 Email: mailto:siderval@siderval.it
Certificate No. MD00/2857/0004/1 Expiry date: 16/01/2014
Web: http://www.siderval.it
Japan
AICHI STEEL CORPORATION
Kobe
Steelmaking
Semi-Finished
Bars
E.A.F. / Ingot
Bars
Normal Strength
Austenitic Stainless
Machinery
Chain Cable Stock
Austenitic Stainless
304L, 316L
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy
190
180
180
125
120
Chita Plant
1, Wano-Wari
Arao-machi
Tokai-shi
Aichi-ken, 476-8666
Tel: +81 52 603 9353 Fax: +81 52 603 9898 Email: mailto:hirohama@he.aichisteel.co.jp
Certificate No. MD00/0076/0006/1 Expiry date: 25/09/2012
AICHI STEEL CORPORATION
Kobe
Bars
150
Kariya Plant
3-6, Toyota-cho
Kariya-shi
Aichi-ken
448-0848
Tel +81 566 21 9130 Fax +81 566 23 6925 Email: mailto:hiroaki.k@he.aichi-steel.co.jp
Certificate No. MD00/0078/0005/1 Expiry date: 24/09/2012
ASIA SPECIAL STEEL CO. LTD.
Nagasaki
Steelmaking
Semi-Finished
48
Tel: +93 482 2222 Fax: +93 482 2227 Email: hayashi.k@asiass.co.jp Web: www.asiass.co,jp
Semi finished products as ingots, nominal 1600mm diameter x 3100mm high to maximum weight shown above, are approved for further processing forgings.
The scope of approval also includes for the provision of molten steel for production of steel castings to Kotobuki Industries Co. Ltd. Kitakyushu Works (LR
Plant Reference M3800).
Certifcate Number: MN00/3796/0003/1 Expiry date: 29/06/2013
Kobe
Steelmaking
Plates
As below
A, B
360AR, 410AR
50
40
5-1, Kousudori
Nakagawa-ku
Nagoya
Tel: +81 52 661 3818 Fax: +81 52 661 2265 Email: mailto:aki-onozato@chubukohan.co.jp Web http://www.chubukokan.co.jp
Certificate No. MD00/0309/0006/1 Expiry date: 20/04/2014
DAIDO STEEL CO., LTD.
Kobe
Steelmaking
Semi-Finished
Bars
Page
E.A.F. / Ingot
Ingots
Blooms
Billets
Structural
38
As below
carbon, carbon-manganese
carbon, carbon-manganese
carbon, carbon-manganese
carbon, carbon-manganese
7
275
148
270
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Bars
Structural
Machinery
carbon, carbon-manganese
carbon, carbon-manganese
Steelmaking
E.A.F. / Ingot
As below
Normal Strength
A, B
170
28
Chita Plant
39, Motohama-machi
Tokai-shi
Aichi-ken
Kobe
160
160
Hoshizaki Plant
2-30, Daido-cho
Minami-ku
Nagoya-shi
Yokohama
Shibukawa Plant
500, Ishihara
Shibukawa-shi
Gunma 377-0007
Tel: +81 279 25 2009 Fax: +81 279 25 2043 Email: mailto:t-furuse@ac.daido.co.jp
Certificate No. MD00/0375/0005/1 Expiry date: 27/11/2012
DAISAN STEEL Co., Ltd.
Yokohama
Steelmaking
Semi-Finished
Bars
Shinsuna Works
3-2-1, Shinsuna
Kohto-ku
Tokyo 136-0075
Tel: +81 (0)3 3644 1101 Fax: +81 (0)3 3664 1100 Email: mailto:sshimomura@daisan-seiko.co.jp
web: www.daisan-seiko.co.jp
Certificate No. MD00/0381/0006/1 Expiry date: 26/02/2015
GODO STEEL LTD.
Kobe
Steelmaking
Sections
Bars
As below
A
A
U3
U1, U2
15
150
100
150
Steelmaking
Bars
E.A.F. / Ingot
Normal Strength
Structural
As below
A
alloy, austenitic stainless
150
150
Kobe
Yasugi Works
2107-2, Yasugi-cho
Yasugi-shi
Shimane-ken
Tel: +81 (0) 854 22 1908 Fax: +81 (0)854 23 0281 Email mailto:hitoshi.iwata@hitachi-metals.co.jp Web http://www.hitachi-metals.co.jp
Certificate No. MD00/0678/0005/1 Expiry date: 20/12/2012
JFE BARS & SHAPES CORPORATION
Kobe
Steelmaking
Semi-Finished
Sections
300
25
32
25
32
As below
carbon, carbon-manganese
A
AH32, AH36, DH32, DH36
150
32
32
Himeji Works
1280, Hosoe
Shikama-ku
Himeji 672-8064
Tel +81 (0)792 35 6376 Fax +81 (0)792 35 2048 email: mailto:hiroshi-satou@jfe-bs.co.jp Internet http://www.jfe-bs.co.jp
Certificate No. MD00/1535/0006/1 Expiry date: 27/08/2012
JFE BARS & SHAPES CORPORATION
Yokohama
Steelmaking
Semi-Finished
Sections
Page
39
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Kashima Works
7 Minamihama, Kamisu-city
Ibaraki Pref.
314-0111
Tel: +81 (0)299 90 5218 Fax: +81 (0)299 90 5201 Email: mailto:yoshiaki-maki@jjfe-bs.co.jp
Semi finished products as billets to nominal 150mm width and 12000mm nominal length to the maximum thickness shown above are approved for further
processing for rolled products.
Certificate No. MD00/1920/0005/1 Expiry date: 29/01/2014
JFE STEEL CORPORATION
Kobe
Steelmaking
Plates
B.O.S./E.A.F./Ingot/Con Cast
Normal Strength
Higher Strength
Austenitic Stainless
Clad
Tapered
Bars
Differential Thickness
Normal Strength
Boiler & Pressure Vessel
Normal Strength
Higher Strength
Structural
Machinery
Chain Cable Stock
As Below
A, B, D, E
AH42, FH27S, FH32, FH36
DH42, DH46, DH50, DH55, DH62, DH69, EH42,
EH46, EH50, EH55, EH62, EH69
AH40, DH40, EH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360, 410
360FG, 410FG, 460FG, 490FG, 510FG
9Ni
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
304L, 316L
E/304L, E/316L
A, B, D, AH27S, AH32, AH36, DH27S, DH32,
DH36, EH27S, EH32, EH36
A, B, D, AH27S, AH32, DH27S, DH32
A, B
360, 410
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
carbon, carbon-manganese
alloy
carbon-manganese
U1, U2
200
50
75
80
150
40
100
134
40
50
50
30
50
40
16
16
32
32
400
165
190
130
Tel: +81 (0)86 447 2730 Fax: +81 (0)86 447 2735 Email: mailto:ma-inoue@kawasaki-steel.co.jp
Specified through thickness properties on all plate grades.
Certificate No. MD00/0838/0011/1 Expiry date: 16/11/2012
MQS Approved - Approval No. MQS 022
JFE STEEL CORPORATION
Kobe
Steelmaking
Plates
Austenitic Stainless
Clad
Differential Thickness
Hot Rolled Coil
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Sections
Normal Strength
Higher Strength
Page
40
As below
A, B, D, E
AH32S
AH46S*, DH46S*, EH46S*
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40, FH27S,
FH32, FH36, FH40
360AR, 410AR
460FG, 490FG, 510FG
360FG, 410FG
LTAH27S, LTAH32, LTAH36, LTAH40,
LTDH27S, LTDH32, LTDH36, LTDH40,
LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,
LTFH32, LTFH36
304L, 304LN, 316L, 316LN, 317L, 317LN
A to EH36/304L, A to EH36/316L
A, DH34S, EH34S, B, D, A,B, A,B,D,E, AH32,
AH36, DH32, DH36, EH32, EH36, AH34S
A, B, D, E
AH27S, AH32
460FG, 490FG
360, 410, 360FG, 410FG
E
A, B, D
AH40, DH40, EH40, FH27S, FH32, FH36
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
LTAH27S, LTAH32, LTAH36, LTAH40,
LTDH27S, LTDH32, LTDH36, LTDH40,
LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,
LTFH32, LTFH36
120
55
75
80
40
55
70
40
55
30
50
12
8
8
12
18
35
18
36
18
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Tel. (0)84 945 3160 Fax (0)84 945 3101 EMail mailto:k-nibu@jfe-steel.co.jp Web http://www.jfe-steel.co.jp
MQS Approved - Approval No. MQS 005
Certificate No. MD00/1055/0010/1 Expiry date: 17/10/2012
JFE STEEL CORPORATION
Yokohama
Steelmaking
Plates
Normal Strength
Higher Strength
Higher strength
As below
A, B, D, E
FH27S, FH32, FH36
AH42, DH42, EH42
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40
360AR, 410AR
360, 410, 460FG, 490FG, 510FG
360FG, 410FG
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
D, E
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36, AH40, DH40, EH40
AH32, AH36
100
42
83
90
40
50
100
42
40
50
50
22
Tel: +81 44 322 1185 Fax: +81 44 322 1510 Email: mailto:m-toyonag@jfe-steel.co.jp
All plate grades with specified through thickness properties.
Materials Quality Scheme Approved - Approval No. MQS 034
Certificate No. D00/1056/0007/1 Expiry date: 30/10/2012
KOBE STEEL LTD.
Kobe
Steelmaking
Plates
Differential Thickness
Normal Strength
Boiler & Pressure Vessel
As below
As below
As below
As below
A, B, D, E
DH42, DH50, DH55, DH62, DH69, EH42, EH50,
EH55, EH62, EH69, FH40, FH42, FH46, FH50,
FH55, FH62, FH69
AH46, DH46, EH46
AH40, DH40, EH40
FH27S, FH32, FH36
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 460AR
360, 410, 460, 490, 460FG, 490FG, 510FG
360FG, 410FG
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
A,B, D,E, HTS up to EH36
A, B, D
360FG, 410FG
B.O.S./Ingot/Con Cast
Ingots
Rolled Blooms
Semi-finished Products
Normal Strength
Machinery
Chain Cable Stock
As below
carbon, carbon-manganese, alloy
Carbon, Carbon-Manganese, Alloy
carbon, carbon-manganese, alloy
A
carbon, carbon-manganese, alloy
U1, U2, U3
150
50
60
80
90
100
40
90
100
90
50
13
13
Kakogawa Works
1 Kanazawa-cho
Kakogawa-city
Hyogo-pref.
Tel: +81 794 36 1151 Fax: +81 794 36 2079 Email: mailto:aa14011@steel.kobelco.co.jp
All grades with specified through thickness properties.
Certificate No. MD00/0863/0008/1 Expiry date: 16/10/2012
Materials Quality Scheme Approved - Approval No. MQS 009
KOBE STEEL LTD.
Kobe
Steelmaking
Semi-Finished
Bars
Page
41
8
600
250
250
250
160
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Steelmaking
Sections
Bars
As below
A
A
16
53
As below
carbon, carbon-manganese
16
Kobe Works
2 Nadahama-Higashimachi
Nada-ku
Kobe
Nagasaki
Yamaguchi Division
Oaza Onoda 6289-18
Sanyo-Onoda City
Yamaguchi Prefecture
756-0817
Tel: +81 836 83 6172 Fax: +81 836 83 0839 Email mailto:hyamashita@kyoeisteel.co.jp Web http://www.kyoeisteel.co.jp
Certificate No. MD00/1892/0005/1 Expiry date: 21/03/2013
MITSUBISHI STEEL MFG. CO., LTD.
Yokohama
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
Hirota Works
405, Aza Rokucho
Hirota, Kawahigashi-machi
Aizuwakamatsu-city
Fukushima Pref. 969-3471
tel: +81 (0)242 75 3111 Fax: +81 (0)242 75 2619 Email mail to: kikuchi.hiroaki@mitsubishisteel.co.jp
Certificate No. MD00/1802/0001/1 Expiry date: 02/03/2012
MITSUBISHI STEEL MURORAN INC.
Yokohama
Semi-Finished
Bars
Ingots
Blooms/Billets
Structural
Machinery
as below
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
20
515
270
210
Muroran Works
12, Nakamachi
Muroran shi
Hokkaido
050-0087
Tel: +81 (0)143 41 2838 Fax: +81 (0)143 41 2869 Email mailto:chino.katsuhiko@mitsubishisteel.co.jp
Certificate No. MD00/1893/0006/1 Expiry date: 09/04/2013
NIHON STEEL CO., LTD.
Kobe
Bars
Normal Strength
38
As below
304L, 316L, 321, 347
Austenitic Stainless
11, Rinkai-cho
Kishiwada City
Osaka
tel: +81 724 23 5151 Fax: +81 724 39 8357 Email mailto:matsukura@nihon-steel.co.jp
Certificate No. MD00/2299/0004/1 Expiry date: 12/03/2011
NIPPON METAL INDUSTRY CO., LTD.
Kobe
Steelmaking
Hot Rolled Coil
Kinuura Works
1, Hama-cho
Hekinan-shi
Aichi- ken
447-8610
Tel: +81 566 48 7218 Fax: +81 566 48 1596 Email: mailto:hayashik@nikkinko.co.jp
Certificate No. MD00/2338/0006/1 Expiry date: 26/05/2014
NIPPON STEEL & SUMIKIN
Nagasaki
Plates
Clad
55
40
Nagasaki
Steelmaking
Semi-Finished
Plates
Hot Rolled Coil
Slabs
Austenitic Stainless
Austenitic Stainless
236
8
8
Page
42
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Yokohama
Steelmaking
Semi-Finished
Plates
Blooms/Billets
Normal Strength
Higher Strength
Tapered
Differential Thickness
Normal Strength
Higher Strength
Normal Strength
Boiler and Pressure Vessel
Normal Strength
As below
As below
carbon, carbon-manganese
carbon, carbon-manganese, alloy
A, B, D, E
AH42, DH42, EH42, FH42
AH46, AH50, DH46, DH50, EH46, EH50, FH46,
FH50
AH40, DH40, EH40, FH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36, FH27S, FH32, FH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
LHAH42, LTAH46, LTAH50, LTDH42, LTDH46,
LTDH50, LTEH42, LTEH46, LTEH50, LTFH42,
LTFH46, LTFH50
LTAH40, LTDH40, LTEH40, LTFH40
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
A,B,D,E, HTS up to EH40
A,B,D,E, HTS up to EH40
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
A, B
360, 410
A, B
360, 410
Sections
Plates from coils
Hot Coiled Strip
300
165
100
50
70
80
100
40
100
50
80
100
50
50
24
19
12
12
25
25
Kimitsu Works
1 Kimitsu
Kimitsu-shi
Chiba-ken
299-1141
Web http://www.nsc.co.jp/kimitsu/
Yokohama
Steelmaking
Semi-Finished
Bars
B.O.S./E.A.F./Ingot/Con Cast
Billets
Normal Strength
Higher Strength
Chain Cable Stock
As Below
carbon, carbon-manganese, alloy
A, B
AH32, AH36, DH32
U1, U2, U3, R3, R3S, R4
API-2F
190
200
200
136
152
Muroran Works
12, Naka-machi
Muroran City
Hokkaido
050-8550
Tel: +81 (0)143 47 2337 Fax: +81 (0)143 47 2783 Email: maruyama.kenichi.nsc.co.jp Web: http://www.nsc.co.jp/muroran
The approval for bars intended for chain cable stock are for material rolled from continuous casting billets only.
Bars for mooring grade chain cable stock in grades R3, R3S and R4 are restricted to Hamanaka Chain Mfg. Co. Ltd. Himeji plant only.
Bars in Grade U3 in the above supply condition may be accepted up to 200mm diameter for the further processing for the production of forged chain cable
fittings.
Approval for billets, maximum 190mm x 190mm x 8000mm maximum weight 2.3 Tonnes, as semi finished products are for further processing for forgings.
Certificate Number: MD00/1101/0010/1 Expiry date: 02/07/2014
NIPPON STEEL CORPORATION
Kobe
Steelmaking
Plates
B.O.S./Ingot/Con Cast
Normal Strength
Higher Strength
Page
43
As below
A, B, D, E
FH27S
AH40, DH40
DH42, DH46, EH40, EH42, FH32, FH36, FH40,
FH42
EH46, EH46S*, FH46, FH46S*
DH50, DH55, DH62, DH69
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360, 410
130
40
50
70
110
200
210
40
115
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Kobe
Plates
As below
A, B, D, E
DH42, EH42, FH42
EH40S*
AH47, DH47, EH47, AH47-W430, DH47-W430,
EH47-W430, EH47-W140, DH47-W140,
AH47-W140
AH40, DH40, EH40, FH27S, FH32, FH36, FH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 460AR
360, 410, 460, 490
360FG, 410FG, 460FG, 490FG, 510FG
LTAH27S, LTAH32, LTAH36, LTAH40,
LTDH27S, LTDH32, LTDH36, LTDH40,
LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,
LTFH32, LTFH36, LTFH40
A, B, D, E, A,B,D,E, AH27S, AH32, AH36,
DH27S, DH32, DH36, EH27S, EH32, EH36
A,B,D
A,B, A,B,D,E, AH27S, AH32, AH36, DH27S,
DH32, DH36, EH27S, EH32, EH36
A
AH27S, AH32, AH36
360FG, 410FG, 460FG, 490FG, 510FG
Japan
NIPPON STEEL CORPORATION
120
40
Nagoya Works
3, 5 Chome
Tokai-machi
Tokai-city
Aichi Pref. 476-8686
Nagasaki
Steelmaking
Plates
Tapered
Differential Thickness
Normal Strength
Higher Strength
Boiler & Pressure Vessel
100
50
60
70
80
100
40
90
100
80
50
35
50
12
12
12
Oita Works
1, Oaza Nishinotsu
Oita City
Oita Prefecture
Tel +81 97 553 2122 Fax +81 97 553 2379 Email: mailto:saitoh.shuntaroh@oita.nsc.co.jp Web http://www.nsc.co.jp/oita/
All plates with specified through thickness properties except H47 grades.
* Plates in LLF27 and LLF33 up to a maximum thickness of 40 mm can be accepted for approved applications.
* Plates in EH40S are for approved applications only and may have a Nickel content up to 1.5% with a carbon equivalent of 0.4%. The Approved thickness
range of EH40S is 30mm to 60mm.
* Plates in the H47 grades to be produced to the agreed chemistry ranges and agreed max CEVs.
Materials Quality Scheme Approved - Approval No. MQS010
Certificate No. MD00/1103/0013/1 Expiry date: 30/03/2013
NIPPON STEEL CORPORATION
Kobe
Sections
Normal Strength
Higher Strength
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
50
50
Steelmaking
Plates
Fe-Ni alloys
Austenitic Stainless
Fe-Ni alloys
As below
321, 347
304L, 316L
Fe-36Ni*
304L, 316L, 321, 347
Fe-36Ni*
10
53
8
8
3
Sakai Works
1, Chikko Yawata-cho Sakai-Ku
Sakai city
Osaka
Yokohama
KAWASAKI PLANT
4-2, Kojima-cho
Kawasaki-ku
Kawasaki-shi
210-8558
Tel: +81 44 271 3130 Fax: +81 44 271 3292 Email mailto:nobuyuki.hashimoyo@nyk.co.jp Internet http//www.nyk.co.jp
* accepted for approved applications
Certificate No. MD00/1109/0006/1 Expiry date: 02/06/2012
Page
44
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Yokohama
Steelmaking
Semi-Finished
Bars
As below
carbon, carbon-manganese
A
AH32, AH36
Steelmaking
Semi-Finished
A
A
185
Steelmaking
Sections
As below
A, B, D
AH32, AH36
Steelmaking
Gunma Works
120, Nittasorimachi-cho
Ota-city
Gunma Pref.
370-0313
Kobe
Sakai Works
1 Chikko Yawata-cho
Sakai
Osaka
Kobe
15
12
Kobe
Bars
Normal Strength
Machinery
Chain Cable Stock
alloy
As below
carbon, carbon-manganese, austenitic stainless
carbon, carbon-manganese, alloy, austenitic
stainless
A
alloy
U1, U2, U3
Steelmaking
Sections
As below
A, B, D
AH32, AH36, DH32, DH36
Semi-Finished
15
380
220
125
136
3007 Nakashima
Shikama-ku
Himeji-shi
672-8677
Kobe
38
38
Sakai Works
5, Shiohama-cho
Sakai
Osaka
Tel: +81 (0)72 228 5121 Fax: +81 (0)72 228 7119 Email: mailto:h-ue@shinkansai-steel.co.jp
Certificate No. MD00/0823/0006/1 Expiry date: 15/11/2014
SHINKANSAI STEEL CORPORATION
Kobe
Steelmaking
Sections
Bars
Web: http://www.shinkansai-steel.co.jp
As below
A, B, D
AH32, AH36, DH32, DH36
U1, U2, U3
32
32
80
Hoshida Works
4-26-1, Hoshida Kita
Katano-shi
Tel: +81 (0)72 891 0624 Fax: +81 (0)72 893 1319
Email mailto:okayama@shinkansai-steel.co.jp
Web http://www.shikansai-steel.co.jp
Certificate No. MD00/1244/0006/1 Expiry date: 07/10/2012
SUMITOMO METAL INDUSTRIES, LTD.
Yokohama
Steelmaking
Plates
Page
45
150
32
40
47
50
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Yokohama
Plates
Higher Strength
Japan
SUMITOMO METAL INDUSTRIES, LTD.
Clad
Differential Thickness
Sections
Normal Strength
Higher Strength
Normal Strength
Boiler & Pressure Vessel
105
150
40
55
63
100
30
45
38
32
35
35
18
20
35
19
19
Kobe
Bars
Normal Strength
240
Tel: +81 (0)6 6411 7616 Fax: +81 (0)6 6411 7612 Email: mailto:furubaya-hdy@sumitomometals.co.jp
Certificate No. MD00/1458/0006/1 Expiry date: 14/11/2013
SUMITOMO METAL INDUSTRIES, LTD.
Kobe
Steelmaking
Tel: +81 (0) 73451 1133 Fax: +81 734 51 1103 EMail: mailto:kondou-tmo@sumitomometals.co Sales fax +81 34416 6789 Web: www.sumitomometals.co.jp
Certificate No. MD00/1748/0008/1 Expiry date: 26/06/2013
THE JAPAN STEEL WORKS LTD.
Yokohama
Steelmaking
Plates
E.A.F. / Ingot
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Austenitic Stainless
Clad
Page
46
As below
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
304L, 316L
AH32/304L, AH32/316L, AH32/316LN,
AH32/317L
AH32/S31803
A/304L, B/304L, D/304L, E/304L, A/316L,
B/316L, D/316L, E/316L
50
50
40
50
65
19
30
100
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Steelmaking
Semi-Finished
carbon, carbon-manganese
carbon, carbon-manganese
carbon, carbon-manganese
Steelmaking
Plates
Sections
As below
A, B, D
360AR, 410AR
A
32
32
24
Steelmaking
Sections
As below
A
12
Steelmaking
Sections
As below
E
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36, FH27S, FH32, FH36
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
Muroran Plant
4, Chatsu-machi
Muroran
Hokkaido
051-8505
Tel +81 (0)143 22 0451 Fax +81 (0)143 22 5736 Email: mailto:kenji_tanaka@jsw.co.jp
Certificate No. MD00/1507/0006/1 Expiry date: 11/11/2012
TOKAI SPECIAL STEEL CO., LTD.
Kobe
370
155
3, 5-Chome
Tokai-Machi
Tokai-shi
Aichi-ken
Nagasaki
Kyushu Plant
3-5-1, Minami-Futajima
Wakamatsu-ku
Kitakyusyu City
Fukuoka 808-0109
Kobe
Okayama Plant
4-1-1, Minamise
Kurashiki City
Okayama Pref.
Kobe
Higher Strength
Ferritic Low Temperature
Bars
Normal Strength
Higher Strength
Steelmaking
Sections
20
35
20
20
50
50
Toyohashi Works
1, Akemi-cho
Toyohashi-shi
Aichi-ken
Kobe
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
25
25
Tel: +81 (0)79 273 0716 Fax: +81 (0)79 272 0914 Email mailto: knakaue@yamatosteel.co.jp
Certificate No. MD00/1687/0009/1 Expiry date: 21/06/2014
Page
Web:http://www.yamatokogyo.co.jp
47
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Ulsan
Plates
Austenitic Stainless
Duplex Stainless
Steelmaking
Semi-Finished
Plates
carbon-manganese
carbon-manganese
D, E
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36, FH27S, FH32, FH36
460FG, 490FG, 510FG
360AR, 410AR
360FG, 410FG
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
D
A, B
AH27S, DH32
AH32, DH27S
Korea
DK CORPORATION
80
50
#612-1, Go Hyun Ri
Chung Ha Myun
Buk-Ku, Pohang Gyeongsangbuk-do
Ulsan
Higher Strength
Boiler & Pressure Vessel
Sections
Normal Strength
Higher Strength
480
50
83
50
35
40
50
50
25
32
25
32
Pohang Works
880 Songdong-Ri
Daesong-Myun, Nam-Gu
Pohang City, Kyungsangbuk-Do
Tel: +82 542 715684 Fax: +82 542 715317 EMail: jongho.chun@dongkuk.com Web page http://www.dongkuksteel.co.kr
Certificate No. MD00/0414/0012/1 Expiry date: 15/05/2013
Billets to 150 x 150mm, Blooms to 200 x 250 & 250 x 300, Beam Blanks to 400 x 480 x 120mm.
DONGKUK STEEL MILL Co. Ltd.
Seoul
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
460AR
360AR, 410AR
490FG
460FG
360FG, 410FG
83
83
35
40
50
70
83
Dangjin Works
400, Hanjin-ri,
Songak-eup, Dangjin-kun,
Chungnam
Tel: +82 (0) 41 351 4677 Fax: +82 (0) 41 351 4692 Email: sungchul.jeon@dongkuk.com Web: http://dongkuksteel.com
Certifcate Number: MD00/3773/0005/1 Expiry date: 12/04/2013
DONGYANG S.TEC. CO., LTD
Ulsan
Normal Strength
20
Sections
Normal Strength
Higher Strength
A
AH32, AH36
15
16
A, B, D, E
AH27S, AH32, AH36
18
18
#619-12, Munduk-Ri,
Ocheon-Eup Nam-Gu,
Pohang-city, Kyeongbuk,
Busan Port
Sasang Works
230-4 Hakjang-Dong
Sasang-gu
Busan
Tel: +82 (0) 51 313 2881 Fax: +82 (0) 51 313 2889 Email mailtio:sasang@nate.com Web:http://www.dongilsteel.com
Certificate No. MD00/3174/0004/1 Expiry date: 06/08/2014
FINE BESTEEL CO LTD
Changwon
Sections
Normal Strength
Higher Strength
Tel: +82 (0)55 259 2000 / 2064 Fax: +82 (0)55 259 2060
Email xxxxxxxxxxxx
Web www.fine-besteel.com
Certificate No. MD00/3659/0003/1 Expiry date: 09/09/2012
Page
48
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Changwon
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy
Steelmaking
Semi-Finished
As below
A, B, AH27S, AH32
130
Steelmaking
Semi-Finished
E.A.F./Ingot/Con Cast
Ingots
Blooms
Billets
Normal Strength
Higher Strength
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese
carbon, carbon-manganese
A, B
AH27S, AH32, AH36
75
270
200
32
32
80
Tel: +82 55 964 8000 Fax: +82 55 964 8011 Mail to: iyy9702@naver.com
Certificate No. MD00/3872/0001/1 Expiry date: 05/01/2014
HWAN YOUNG STEEL INDUSTRIES CO., LTD
Seoul
Dangjin Works
650-5, Samhwa-Ri
Suckmoon-Myun
Dangjin-Kun
Choongnam
Seoul
Sections
Inchon Plant
#1, Songhyun-Dong
Dong-Ku
Inchon
Tel: +82 32 760 2753 Fax: +82 32 760 2866 Email: arom@hyundai-steel.com Web: http://www.hyundai-steel.com
Sections include flat bars up to 400 mm width.
Approval for Ingots as Semi-finished Products, Ingots, is for further processing as Forgings.
Blooms and Billets as semi finished products are approved for further processing for rolled products to maximum thickness shown above, to nominal width
400mm for blooms, 200mm for billets and nominal 10000mm length.
Certificate No. MD00/0754/0007/1 Expiry date: 03/01/2014
HYUNDAI STEEL COMPANY
Ulsan
Steelmaking
Semi-Finished
Sections
As below
carbon, carbon-manganese, alloy
B, D, E
A
AH27S, AH40, DH27S, DH40, EH27S, EH32,
EH36, EH40, FH27S, FH32, FH36, FH40
AH32, AH36, DH32, DH36
LTAH27S, LTAH32, LTDH27S, LTDH32,
LTEH27S, LTEH32, LTFH27S, LTFH32, LTFH36,
LTFH40
R3S, R4
U1, U2, U3, R3
Bars
Steelmaking
Sections
carbon-manganese
A, B, D
AH27S, AH32, AH36
Steelmaking
Semi-Finished
Hot Rolled Coil
B.O.S./E.A.F./Con Cast
Slabs
Normal Strength
Higher Strength
Normal Strength
Higher Strength
As Below
Normal strength, Higher Strength
A, B
AH32, AH36
A, B
AH32, AH36
18
37
18
37
18
110
150
Ulsan
16
16
Tel No. +82 54 271 1479 Fax No. +82 54 271 1512
Email mailto:2007372@hyundai-steel.com
Web: www.hyundai-steel.com
Certificate No. MD00/3084/0005/1 Expiry date: 07/06/2013
HYUNDAI STEEL COMPANY
Seoul
300
22
22
22
22
HR Coil Plant
Kodae-Ri
Songak-Myeon
Dangjin-Gun
Chungnam
Tel: +82 41 680 1691 Fax +82 41 680 1699 Email; jwmking@hyundai-steel.com Web: http://www.hyundai-steel.com
Slabs as semi finished products nominal 2200mm width x nominal 4400mm length are approved for further processing for rolled products, to the above
maximum thickness produced by B.O.S Steelmaking and to 210mm maximum thickness produced by E.A.F. Steelmaking.
Certificate No. MD00/3446/0003/1 Expiry date: 24/03/2014
Page
49
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Seoul
Plates
Normal Strength
Higher Strength
A, B, D, E
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40
360AR, 410AR, 460AR
360FG, 410FG, 460FG, 490FG
Dangjin Works
167-32, Godae-Ri
Tel: +82 41 680 1680 or 1685 Fax +82 41 680 1699 Email; sbpark@hyundai-steel.com or jwmking@hyundai-steel.com Web: http://www.hyundai-steel.com
Approval is restricted to plates produced with steel made by the BOF + con cast processing route.
Approval for plates in grades AH27S, AH32, AH36, 360AR, 410AR, and 460AR as rolled fine grain Al+V are restricted to the thickness range 20.0mm to
35.0mm.
Approval for plates in grades AH27S, AH32, AH36, AH40, DH27S, DH32, DH36, DH40, EH27S, EH32, EH36, EH40 the TM+Acc fine grain Al+Nb+Ti are
restricted to the thickness range >15.0mm to 83.0mm.
Approval for plates in Normalising Rolled condition are restricted to maximum 3200mm width.
Plates with specified through thickness properties may be accepted with the suffix Z35 applied to Higher Strength Grades in the TM+acc Fine Grain Al+Nb+Ti
supply condition and TM Fine Grain Al+Nb+Ti supply condition .
Certificate Number: MD00/3761/0006/1 Expiry date: 25/03/2013
JEENYANG IND. Co., Ltd.
446, Bonchon-Dong
Ulsan
Bars
Machinery
alloy
120
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy
140
Sections
Bars
Normal Strength
Normal Strength
Higher Strength
A
A
AH32
Yeongcheon-City,
Keongbuk,
Tel: +82 (0)54 335 3500 Fax: +82 (0)54 335 0355
Email: dhshon@jysteel.com Web: www.jysteel.com
Cert No MD00/3897/0001/1 Expiry date: 23/03/2014
KISCO
Changwon
N 70, Shinchon-dong
Changwon
Kyungnam
Busan Port
15
65
30
Noksan Works
1660-1 Songjeong-Dong
Gangseo-Gu
Busan
Tel: +82 51 310 8912 Fax: +82 51 831 3957 Email mailto:nam001@yahoo.co.kr Web http://www.ekosco.com
Certificate No. MD00/3096/0005/1 Expiry date: 08/05/2013
KOREA STEEL SHAPES CO., LTD
Changwon
Steelmaking
Semi-Finished
As below
A, AH32, AH36, carbon, carbon-manganese
220
Bars
Machinery
austenitic stainless
alloy
carbon, carbon-manganese
85
93
100
Steelmaking
Semi-Finished
Plates
As below
Normal strength, Higher Strength
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 360FG, 410FG, 460FG, 490FG,
510FG
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR
Chilseo Works
68, Gyenae-Ri, Chilseo-Myeon
Haman-Gun
Gyeongnam
Busan Port
307-103 Shinpyeong-dong,
Saha-gu,
Busan,604-030
Tel No: +82 51 204 9101 Fax No. +82 51 204 9109
Email: ksm1481@kjsteel.co.kr
Web Address www.kjsteel.co.kr
Cert No MD00/3758/0001/1 Expiry date 15.03.2013
POSCO Gwangyang Works
Changwon
Page
Normal Strength
Higher Strength
Boiler & Pressure Vessel
50
300
100
100
35
22
12
12
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
700 Kumho-dong
Kwangyang-si
Cheonnam 545-711
Tel: +82 61 790 2170 Fax: +82 61 790 2909 Email: mailto:ssyang@posco.com Web: http://www.posco.com
The supply of semi-finished products, slabs, nominal 1750mm wide x 6000mm long x 20 tonnes, for supply for further processing for rolled products.
Hot rolled coils in normal strength grades in the supply condition thermomechanical fine grain aluminium are restricted to the thickness ranges >12 to 22mm.
Certificate Number: MD00/3086/0008/1 Expiry: 14/07/2014
POSCO Pohang Works
Ulsan
Steelmaking
Plates
B.O.S./E.A.F./Con Cast
Normal Strength
Higher Strength
Austenitic Stainless
Duplex Stainless
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Austenitic Stainless
As Below
A, B, D, E
AH46S*, DH46S*, EH46S*
FH27S, FH32, FH36
AH40, DH40, EH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
460FG, 490FG, 510FG
360FG, 410FG
LTAH27S, LTAH32, LTAH36, LTDH27S,
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,
LTFH27S, LTFH32, LTFH36
304L, 304LN, 316L, 316LN
UNS S31803, UNS 32900*, UNS 32205*
E
A, B, D
EH27S, EH32, EH36
AH27S, AH32, AH36, DH27S, DH32, DH36
460FG, 490FG, 510FG
360FG, 410FG
304L, 316L
100
80
83
90
100
40
90
100
50
80
50
12
22
16
22
12
22
8
5, Dongcheon-Dong
Nam-ku, Pohang City,
Kyungsangbuk-Do
Tel: +82 2 3457 1586 Fax: +82 2 3457 1981 Email: mailto:bumstar@posco.co.kr Web: http://www.posco.co.kr/posco-in
All plates with specified through thickness properties except AH46S, DH46S and EH46S.
*approved applications only.
Certificate No. MD00/1206/0015/1 Expiry date: 01/05/2013
POSCO SPECIALITY STEEL CO., LTD.
Changwon
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
Machinery
As below
carbon, carbon-manganese, alloy, austenitic
stainless
carbon, carbon-manganese, alloy
austenitic stainless
carbon, carbon-manganese, alloy
Bars
Structural
Normal Strength
Higher Strength
A
AH27S, AH32
18
15
As below
carbon, carbon-manganese, alloy
50
150
150
170
150
65, Shinchon-dong
Changwon
Kyungnam
641-370
Tel: +82 (0)55 269 6727 Fax: +82 (0)55 269 6907 Email:mailto:soonpark@poscoss.com
http://www.poscoss.com
Certificate No. MD00/1294/009/1 Expiry date: 09/08/2011
S & STEEL CO., LTD.
Busan Port
Tel: +82 51 262 7525 Fax: +82 51 924 7902 Email: sadrain888@hanmail.net Web: http://www.sdstl.co.kr
Certificate No. MD00/3523/0002/1 Expiry date: 25/09/2014
SPP YULCHON ENERGY CO., LTD.
Mokpo
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
Tel: +82 61 760 7100 Fax: +82 61 725 7733 Email: kimlh@spp.co.kr Web: http://www.sppycenergy.co.kr
Ingots as semi finished products are approved for further processing for forgings, nominal maximum dimensions 1630/1850mm diameter x 2850mm long, to the
above maximum weight.
Certificate Number: MD00/3866/0001/1 Expiry date: 21/02/2015
SeAH BESTEEL CORPORATION
Mokpo
Steelmaking
Semi-Finished
E.A.F./Ingot/Con Cast
Ingots
Blooms
Billets
Machinery
Chain Cable Stock
Bars
Page
51
As below
alloy
carbon, carbon-manganese
carbon, carbon-manganese, alloy
carbon, carbon-manganese
carbon, carbon-manganese, alloy
R5
R4S
R4
U1, U2, U3, R3, R3S
109
155
510
180
300
140
146
155
165
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Gunsan Plant
1-6, Soryong-Dong
Gunsan City
Jeonlabuk-Do
Busan Port
Steelmaking
Sections
Bars
As below
A
A
7
32
90 Gupyung-Dong
Saha-Gu
604-817
Busan
Tel. +82 (0)51 260 2457 Fax +82 (0)51 265 2430 Email:mailto:jakim@yksteel.co.kr Web: http://www.yksteel.co.kr
Certificate No. MD00/0650/0007/1 Expiry date: 26/05/2014
Luxembourg
ARCELORMITTAL BELVAL ET DIFFERDANGE
Lyon
Steelmaking
Sections
As below
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
26
26
Steelmaking
Sections
E.A.F./Ingot/Con Cast
Normal Strength
Higher Strength
As below
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
40
40
A, B, D
AH36, DH36
30
30
A
A
40
40
BELVAL MILL
TMB Rolling Plant
Esch-Belval Mill
66 rue de Luxembourg
L4009 Esch sur Alzette
Lyon
Differdange Mill
66 rue de Luxembourg
L 4009 Esch sur Alzette
Tel: +352 58 2028 84 Fax: +352 5835 81 Email: mailto:julien.bettendorff@arcelor.com Web http://www.arcelor.com
Certificate No. MD00/0032/0006/1 Expiry date: 12/03/2013
ARCELORMITTAL RODANGE ET SCHIFFLANGE
Lyon
Sections
Normal Strength
Higher Strength
Rodange Mill
2, Rue de L'industrie
L-4801 Rodange
Tel: +352 5019 2655 Fax: +352 5019 2217 Email: mailto:stephane.arnault@areclormittal.com Web http://www.ares.lu
Certificate No. MD00/2266/0005/1 Expiry date: 18/01/2013
TLM (Train Lamin Marchand)
Lyon
Sections
Bars
Normal Strength
Normal Strength
Tel: +352 57 129 3331 Fax: +352 57 129 2126 Email: mailto:m.tonon@lme.fr
Certificate No. MD00/2265/0005/1 Expiry date: 17/10/2013
Page
52
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Beograd
Fabricated Sections
Normal Strength
Higher Strength
A
AH36
35
40
Steelmaking
Plates
As below
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR, 460AR
360, 410, 460, 490, 460FG, 490FG, 510FG
360FG, 410FG
Macedonia
FAKOM A.D.
St. Aleksandar Makedonski No.5
POB 439
1000 SKOPJE
Beograd
100
50
40
50
100
Tel: +389 2 328 7024 Fax: +389 2 3175 982 Email mailto:kocovski@makstil.com Web http://www.makstil.com
Specified through thickness properties for plates up to 50 mm thickness
Certificate No. MD00/2216/0006/1 Expiry date: 23/05/2013
Malaysia
JI KANG DIMENSI Sdn. Bhd.
Lot 69-71, Kawasan Perindustrian Gebeng
26080 Kuantan
Pahang Darul Makmur
Kuala Lumpur
Plates
Normal Strength
30
As below
carbon, carbon-manganese
A, B, D, E
AH27S, AH36, DH27S, DH32, DH36, EH27S,
EH32, EH36
460FG, 490FG, 510FG
360FG, 410FG
Tel: +609 583 9881 Fax: +609 583 9881 Email: mailto:teech@ji-seng.com.my
Certificate No. MD00/3022/0003/1 Expiry date: 29/06/2012
MEGASTEEL SDN. BHD.
Kuala Lumpur
Steelmaking
Semi-Finished
Hot Rolled Coil
70
16
12
12
16
Tel: +60 (0)3 3182 2000 Fax: +60 (0)3 3182 2278 Email mailto:choomj@megasteel.com.my Web http://www.lion.com.my
Certificate No. MD00/2803/0005/1 Expiry date: 05/06/2013
Mexico
ARCELORMITTAL LAZARO CARDENAS, S.A. de
C.V.
Metepec/Veracr Steelmaking
uz
Semi-Finished
carbon, carbon-manganese
Slabs
carbon, carbon-manganese
250
Steel types carbon and carbon-manganese cover the supply of blooms for processing into normal strength, high strength and ferritic steels for low temperature
service according to the Society's Rules for the Manufacture, Testing and Certification of Materials, Chapter 3. The final processing mill is responsible for
ordering steel which complies with their approved chemical composition and enables them to achieve the required mechanical properties
Tel: +52 753 533 1871 Fax: +52 753 533 1187
Email:carmen.aparaicio@arcelormittalsteel.com
Web http://www.arcelormittalsteel.com
Certificate No. MD00/0783/0006/1 Expiry date: 09/01/2014
Page
53
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Amsterdam
Steelmaking
Semi-Finished
Plates
Hot Rolled Coil
As below
carbon, carbon-manganese
A, B
A, B
Steelmaking
E.A.F. / Ingot
Semi-Finished
Ingots
11
Slabs
320
Blooms
400
Billets
125
carbon, carbon-manganese
A, carbon, carbon-manganese
160
Netherlands
CORUS STAAL B.V.
225
20
20
Ijmuiden Works
Postbus 10000
1970 CA Ijmuiden
Tel +31 2514 92110 Fax +31 2514 70414 Email: mailto:janneke.bakels@corusgroup.com
Certificate No. MD00/0698/0007/1 Expiry date: 30/09/2012
NEDSTAAL B.V.
Rotterdam
Marine
Rapenburg 1
P.O. Box 210
2950 AE Alblasserdam
Tel: +33 (0)78 692 3715 Fax: +31 (0)78 692 3712 Email mailto:anton.rombout@nedstaal.nl Web http://www.nedstaal.nl
Certificate No. MD00/3010/0003/1 Expiry date: 12/09/2012
Norway
CELSA ARMERINGSSTL AS
Oslo
Steelmaking
Semi-Finished
Mo Industripark
PO Box 500
N-8601 Mo i Rana
Tel: +47 7513 6500 Fax: +47 7513 6845 Email: mailto:halvard.meisfjord@celsanordic.com Web http://www.celsanordic.com
Certificate No. MD00/2103/0005/1 Expiry date: 07/09/2014
RUUKKI PROFILER AS
Oslo
Sections
Normal Strength
Higher Strength
Normal Strength
Higher Strength
A, B, D, E
FH32, FH36, DH46, EH46
AH32, AH36, AH40, DH32, DH36, DH40, EH32,
EH36, EH40, DH42, EH42
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,
LTEH36, LTFH32, LTFH36
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
50
35
50
35
35
35
Peru
EMPRESA SIDERURGICA DEL PERU S.A.A.
Callao
Steelmaking
Plates
Hot Rolled Coil
B.O.S. / Ingot
E.A.F. / Ingot
Normal Strength
Normal Strength
As below
As below
A
A
32
10
Tel +51 43 883000 Fax +51 43 324580 Email: mailto:rrossel@sider.com.pe Web: http://www.sider.com.pe
Certificate No. MD00/0461/0005/1 Expiry date: 11/04/2012
Page
54
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Katowice
Plates
Normal Strength
Boiler & Pressure Vessel
Normal Strength
A, B, D, E
360AR, 410AR, 360, 410, 360FG, 410FG
A, B, D, E
25
25
25
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36, FH27S
40
40
Poland
''HUTA POKJ'' S.A.
Sections
ul. Niedurnego 79
41-709 Ruda Slaska
Tel +48 32 772 1523 Fax +48 32 772 4856 Email: dkj@hutapokoj.com.pl Web: http://www.hutapokoj.com.pl
Certificate No. MD00/0723/0007/1 Expiry date: 10/12/2012
''INTERSPEED''
Katowice
Sections
Normal Strength
Higher Strength
Tel: +48 (0)41 266 0700; +48 695 385 015 Fax: +48 (0)41 266 0701 Email: mailto:interspeed@interspeed.com.pl Web page http://www.interspeed.com.pl
Certificate No. MD00/2007/0006/1 Expiry date: 25/07/2014
ARCELORMITTAL POLAND S.A
Katowice
Plates
Normal Strength
Higher Strength
Clad
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
A/304L
40
100
50
As below
carbon, carbon-manganese
A, B, D
AH27S, AH32
A, B, D
AH27S, AH32
410 FG, 360 FG, 460 FG
220
15
16
15
16
16
100
100
ODDZIAL BATORY
ul. Lesna 42
41-506 Chorzw
Katowice
Steelmaking
Semi-Finished
Hot Rolled Coil
Plates from coils
ODDZIAL W KRAKOWIE
ul. Ujastek 1
30-969 Krakw
Tel: +48 12 293 2104 Fax: +48 12 293 2145 email: malgorzata.razny@arcelormittal.com Web: http://www.arcelormittal.com/poland/
Slabs as semi finished products are approved for further processing for rolled products to the maximum thickness shown above and nominal 1580mm width
and 11000mm length.
Coils and plates are approved to maximum 2100mm width.
Certificate #: MD00/0707/0010/1 Expiry date: 27/01/2014
ARCELORMITTAL POLAND S.A.
Katowice
Steelmaking
Semi-Finished
Sections
300
280
15
20
Tel: +48 32 776 87 14 Fax: +48 32 776 84 86 Email wojciech.michalczyk@arcelormittal.com Web: http://www.arcelormitta.com/poland/
Approved for ingots, and continuously cast products for re- rolling in all the normal and higher tensile strength grades.
Certificate No. MD00/0717/0010/1 Expiry date: 06/02/2015
ARCELORMITTAL POLAND S.A.
Katowice
Sections
Bars
Normal Strength
Normal Strength
Chain Cable Stock
A
A
U1, U2, U3
E.A.F./Ingot/Con Cast
Ingots
Blooms/Billets
Structural
Machinery
Chain Cable Stock
As below
carbon, carbon-manganese,
carbon, carbon-manganese,
carbon, carbon-manganese,
carbon, carbon-manganese,
U1, U2, U3
25
65
48
Katowice
Steelmaking
Semi-Finished
Bars
Page
55
alloy
alloy
alloy
alloy
25
220
150
65
150
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Katowice
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy
130
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese, alloy
160
Steelmaking
Semi-Finished
As below
carbon, carbon manganese
160
Katowice
Katowice
ul. Pilsudskiego 82
42-400 Zawiercie
Tel: +48 32 672 57 55 Fax: +48 32 672 57 59 Email: anna.wieczorek@cmc.com Web: www.cmcpoland.com
Certificate No. MD00/3594/0003/1 Expiry date: 06/05/2015
Includes billets/blooms up to 185 x 160mm.
ENERGOMONTAZ-POLNOC GDYNIA Sp.z o.o.
Gdansk
Fabricated Sections
Normal Strength
Higher Strength
A
AH32, AH36
40
40
81-038 Gdynia
ul.Handlowa 19
Katowice
Steelmaking
Semi-Finished
Web: http://www.energomontaz-polnoc.com.pl
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
160
170
ul. Zawadzkiego 47
44-109 Gliwice
Tel: +48 32 234 7600 Fax: +48 32 234 7650 EMail mailto:biuro@ferrostal.com.pl Web page http://www.ferrostal.com.pl
The semi finished products above are approved for use for further processing for the finished products defined above.
Certificate No. MD00/2307/0005/1 Expiry date: 31/03/2014
GONAR-BIS Sp. z.o.o.
Katowice
Steelmaking
E.A.F./Ingot/Con Cast
Tel: +48 32 359 7860/0810 Fax: +48 32 359 7092 Email: stalownia@gonar.com.pl Web: www.stalownia.gonar.com.pl
Certificate No. MD00/3580/0001/1 Expiry date: 06/04/2012
HSW - HUTA STALI JAKOSCIOWYCH SA
Katowice
Steelmaking
Semi-Finished
Bars
E.A.F./Ingot/Con Cast
Ingots
Rolled Billets
Blooms/Billets
Rolled Bars
Normal Strength
Higher Strength
Structural
Machinery
Chain Cable Stock
As below
carbon, carbon-manganese, alloy
Carbon, Carbon-Manganese, Alloy
carbon, carbon manganese, Alloy
Carbon, Carbon manganese, Alloy
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
U1, U2, U3
15
130
270
120
120
120
120
120
110
ul. Kwiatkowskiego 1
37-450 Stalowa Wola
Katowice
Sections
Web: http://www.hsw-hsj.com.pl
Normal Strength
Higher Strength
Normal Strength
Structural
Machinery
Chain Cable Stock
Bars
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36
A
carbon, carbon-manganese
carbon, carbon-manganese, alloy
U1, U2
20
20
250
250
250
160
ul. Sobieskiego 24
41-300 Dabrowa Grnicza
Tel +48 32 295 7430 Fax +48 32 262 3788 Email: z.hajduk@hutabankowa.pl; .grzesiak@hutabankowa.pl Web http://www.hutabankowa.com.pl
Certificate No. MD00/0716/0007/1 Expiry date: 05/03/2013
Page
56
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Katowice
Steelmaking
E.A.F. / Ingot
Semi-Finished
Ingots
14
ul.Dyrekcyjna 6
41-506 Chorzw
Katowice
Steelmaking
Semi-Finished
Plates
As below
carbon, carbon-manganese
carbon, carbon-manganese
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 460AR, 360FG, 410FG, 460FG,
490FG, 510FG
250
280
50
50
50
ul. Kucelinska 22
42-207 Czestochowa
Katowice
Bars
Structural
Machinery
150
150
ul. Zelazna 22
41-500 Chorzw
Tel: +48 32 772 2698 Fax: +48 32 772 2250 Email:sowinska.lilianna@wbb.net.pl Web:http://www.wbb.net.pl
Certificate No. MD00/3545/0002/1 Expiry date: 01/12/2014
ZW - WALCOWNIA BRUZDOWA Sp. z o. o.
Katowice
Sections
Normal Strength
Higher Strength
A, B
AH27S, AH32, AH36
20
20
Ul.Oklna 10
42-400 Zawiercie
Romania
ARCELORMITTAL GALATI S.A.
Galatz
Steelmaking
Plates
B.O.S./Ingot/Con Cast
Normal Strength
Higher Strength
Boiler & Pressure Vessel
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
100
100
40
100
Tel: +40 236 802100 Fax: +40 236 802101 Email: mailto:mariana.subtirica@arcelormittal.com Web page http://www.arcelormittal.com
Approval includes for plates with specified through thickness properties, designation Z25, in all grades up to 60 mm thickness in the normalized condition.
Certificate No. MD00/0333/0007/1 Expiry date: 04/12/2013
DOOSAN IMGB S.A
Galatz
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
250
250
As below
carbon, carbon manganese, Alloy
U1, U2, U3
150
95
carbon, carbon-manganese
120
Email: mailto:ion.diaconu@kvaerner.ro
Galatz
Steelmaking
Semi-Finished
Bars
Targoviste
Sos. Gaiesti, 9-11
Jud Dambovita, 130087
Tel: +40 245 632907 Fax: +40 245 213322 Email: mailto:dumitru@cost.ro
Certificate No. MD00/2293/0005/1 Expiry date: 14/02/2014
S.C. FORTUS S.A.
Galatz
Web: http://www.mechel.com
Steelmaking
E.A.F. / Ingot
Page
57
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Galatz
Sections
Normal Strength
Higher Strength
Normal Strength
A
AH27S, AH32, AH36
A
Bars
Tel +40 239 68 5597 Fax +40 239 66 9387 Email: mailto:iulian.vasilescu@laminorul.ro Web http://www.laminorul.ro
Certificate No. MD00/1916/0007/1 Expiry date: 30/03/2015
S.C. SILCOTUB S.A.
Galatz
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese, alloy
260
Steelmaking
Semi-Finished
carbon, carbon-manganese
carbon, carbon-manganese
100
Steelmaking
Semi-Finished
177
Normal Strength
Higher Strength
A, B, D
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36
TENARIS GROUP
Steel Shop Calarasi
Prelungirea Bucurestiului Str. No.162
910125
Calarasi
SC DUCTIL STEEL SA
Galatz
Galatz
Tel: +40 (0)255 217211 Fax: +40 (0)255 211883 Email: mailto: office.resita.tmk-artrom.ro
Web http://www.tmk-artrom.ro
Certificate No. MD00/3804/0001/1 Expiry date: 08/07/2013
Russia
"RM - rolling complex"
St. Petersburg
Sections
14
14
Tel: +7 812 318 0015 Fax: +7 812 568 0015 Email: mailto:l.gorohova@rm-steel.com Web http//www.rm-steel.com
Certificate No. MD00/1910/0008/1 Expiry date: 16/01/2014
CHELYABINSK METALLURGICAL PLANT OAO
St. Petersburg
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
20
Higher Strength
40
A, B, D, E
EH27S, EH32
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH40
360, 410
360FG, 410FG, 460FG, 490FG, 510FG
40
32
40
454047- Chelyabinsk
2-d Paveletskaya ul, 14
Moscow
Fabricated Sections
Tel: +007 (3512)532807 Fax +007 (3512)537789 EMail: mailto:office@metcon.ru Web http://www.metcon.ru
Certificate No. MD00/2723/0005/1 Expiry date: 05/08/2011
J.S.C. SEVERSTAL
St. Petersburg
Plates
Normal Strength
Higher Strength
32
40
Tel: +7 8202 531146 Fax: +7 8202 53 2424 EMail: mailto:sales@stal.ru Web http://www.severstal.ru
Plates in the As Rolled, Normalized, Quenched and Tempered conditions with specified through thickness properties.
Plates in the Normalizing rolled condition to 2200mm maximum width.
Certificate #: MD00/0298/00076/1 Expiry date : 14/06/2013
Page
58
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
J.S.C. SEVERSTAL
St. Petersburg
Plates
Hot Rolled Coil
Normal Strength
Normal Strength
Higher Strength
A
A, B, D, E
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
15
12
12
D, E
A, B
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40
50
70
70
12
Tel: +7 8202 53 1146 Fax: +7 8202 53 2424 EMail: mailto:sales@stal.ru Web http://www.severstal.ru
Certificate No. MD00/2801/0006/1 Expiry date: 14/06/2013
J.S.C. SEVERSTAL
St. Petersburg
Plates
Normal Strength
Higher Strength
Tel: +7 8202 561146 Fax: +7 8202 53 2424 EMail: mailto:sales@stal.ru Web http://severstal.ru
Plates with specified through thickness properties
Certificate #: MD00/2802/0005/1 Expiry date: 14/06/2013
J.S.C. SEVERSTAL
St. Petersburg
Steelmaking
Semi-Finished
As below
As below
carbon, carbon-manganese
315
Tel: +7 8202 561146 Fax: +7 8202 53 2424 EMail: mailto:sales@stal.ru Web http://severstal.ru
Certificate #: MD00/3821/0001/1 Expiry date: 14/06/2013
JOINT STOCK COMPANYEVRAZ NIZHNY TAGIL
METALLURGICAL PLANT
St. Petersburg
Steelmaking
carbon, carbon-manganese
Semi-Finished
Slabs
300
Steelmaking
Semi-Finished
200
125
Steelmaking
Semi-Finished
As below
A, B, D, E, AH32, AH36, DH32, DH36, EH32,
EH36
Steelmaking
Bars
O H / Ingot
Semi-finished Products
As below
carbon, carbon-manganese
1, Metallurgov Str.,
Nizhny Tagil,
Sverdlovsk Region, 622025
St. Petersburg
Tel No. 007 4217 52 9333 Fax No. 007 4217 52 9333
Email: market@amurmetal.ru
Web: www.amurmetal.ru
Certificate No. MD00/3588/0002/1 Expiry: 10/03/2015
JSC EVRAZ CONSOLIDATED
St. Petersburg
250
250
St. Petersburg
120
Tel: +7 812 783 6813 Fax: +7 812 783 6504 Email mailto:sergey.barmashev@petrostal.kzgrou.ru Web: http://www.petrostal.spb.ru
Certificate No. MD00/1751/0006/1 Expiry: 30/01/2015
OJSC "Magnitogorsk Iron & Steel Works"
St. Petersburg
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese
250
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru
Approval covers for slabs as detailed above to nominal width 2520mm and nominal length 7000mm for further processing for rolled products.
Certificate No. MD00/3103/0003/1 Expiry date: 27/08/2013
OJSC "Magnitogorsk Iron & Steel Works"
St. Petersburg
Normal Strength
Boiler & Pressure Vessel
A
360AR, 410AR
10
10
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru
Certificate No. MD00/3834/0001/1 Expiry date: 27/08/2013
Page
59
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
St. Petersburg
Plates
Normal Strength
Boiler & Pressure Vessel
A
360AR, 410AR
A
360AR, 410AR
10
10
A
360AR, 410AR
50
40
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru
Certificate No. MD00/3835/0001/1 Expiry date: 27/08/2013
OJSC "Magnitogorsk Iron & Steel Works"
St. Petersburg
Normal Strength
Boiler & Pressure Vessel
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru
Certificate No. MD00/3836/0001/1 Expiry date: 27/08/2013
OJSC "Magnitogorsk Iron & Steel Works"
St. Petersburg
Plates
Normal Strength
Boiler & Pressure Vessel
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru
Approval covers for plates in the thickness range 30.0 to 50.0mm, to the maximum thickness shown above.
Certificate No. MD00/3837/0001/1 Expiry date: 27/08/2013
Moscow
Steelmaking
Semi-Finished
Hot Rolled Coil
As below
As below
A, B, D
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH36, EH40
460FG, 490FG
360, 410, 360FG, 410FG
260
16
12
10
16
398040, Russia
Pl. Metallurgov 2, NLMK
Lipetsk
Tel: +7 0742 444688 Fax: +7 0742 432541 Email:mailto:info@nmlk.ru Web:http://www.nlmk.ru Telex: 412630NLMK RU
Certificate No. MD00/1124/0005/1 Expiry date: 06/11/2013
OSKOL
St. Petersburg
Steelmaking
Semi-Finished
Bars
carbon, carbon-manganese
carbon, carbon-manganese
U1, U2, U3
O H / Ingot
E.A.F./Ingot/Con Cast
Normal Strength
As below
As below
B, D
A
AH32, AH36
360FG, 410FG, 460FG, 490FG, 510FG
360
80
ELECTROMETALLURGICAL KOMBINAT
309515 Stary Oskol-15
Belgorod Region
Tel +07 4725 375364 Fax +07 4725 373755 vformin@oemk.ru Web http://www.oemk.ru
Certificate No. MD00/3065/0004/1 Expiry date: 26/02/2013
URAL STEEL Open Joint-Stock Company
St. Petersburg
Steelmaking
Plates
Higher Strength
Boiler & Pressure Vessel
40
50
40
40
1, Zavodskaya Street
Novotroitisk
Orenburg Region
462353
Web: http://www.uralsteel.com
Serbia
U.S. STEEL SERBIA d.o.o.
Beograd
Steelmaking
Semi-Finished
Hot Rolled Coil
Plates from coils
As below
As below
A, B, D
A, B, D
200
15
15
Radinac
11300 Smederevo
Tel: +381 26 224 429 Fax: +381 26 225 069 email: mailto:martintucek@usske.sk
Certificate No. MD00/0360/0005/1 Expiry date: 17/03/2013
Page
60
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Prague
Steelmaking
Semi-Finished
Plates
Ingots
Normal Strength
Boiler & Pressure Vessel
Normal Strength
Boiler & Pressure Vessel
Slovak Republic
U.S. STEEL KOSICE, s.r.o.
220
12
12
12
12
Tel: +421 55 673 4731 Fax: +421 55 675 4731 Email: mailto:fkoca@sk.uss.com Web: http:www.usske.sk
Certificate No. MD00/1649/0006/1 Expiry date: 18/06/2014
Semi-finished products in carbon and carbon-manganese steels in all normal strength grades and higher tensile strength grades up to EH36 with maximum
dimensions 1540mm wide to 12000mm long and thickness as stated.
ZELEZIARNE PODBREZOVA A.S.
Prague
Steelmaking
Semi-Finished
As below
carbon, carbon manganese
280
Kolkre 35
976 81 Podbrezova
Tel: +421 48 645 4040 Fax: +421 48 645 4041 Email: mailto:turis@zelpo.sk Web: http://www.zelpo.sk
Including eddy current testing in lieu of hydraulic testing.
Certificate No. MD00/1464/0003/1 Expiry date: 05/12/2013
Slovenia
ACRONI, d.o.o.
Zagreb
Steelmaking
Semi-Finished
Plates
carbon, carbon-manganese
austenitic stainless
carbon, carbon-manganese, austenitic stainless
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 360, 410, 360FG, 410FG, 460FG,
490FG, 510FG
304L, 316L, 317L, 321, 347
250
40
40
40
70
Tel: +385 4 584 1040 Fax: +385 4 584 1068 Email: mailto:askube@acroni.si
Certificate No. MD00/1391/0007/1 Expiry date: 26/10/2013
METAL RAVNE d.o.o.
Zagreb
Web: http://www.acroni.si
Steelmaking
Sections
Bars
E.A.F. / Ingot
Normal Strength
Normal Strength
Chain Cable Stock
20
120
105
Koroka cesta 14
2390 Ravne na Korokem
Tel: +386 2 870 7200 Fax: +386 2 870 7219 Email: mailto:stanko.triglav@metalravne.com
Certificate No. MD00/2889/0003/1 Expiry date: 02/06/2011
Web: http://www.metalravne.com
South Africa
ARCELORMITTAL SOUTH AFRICA LTD.
Johannesburg
Steelmaking
Semi-Finished
Plates
B.O.S./E.A.F./Con Cast
Slabs
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Ferritic Low Temperature
As Below
As below
B, D, E
A
AH32, AH36, DH32, DH36, EH32, EH36, FH32,
FH36
360FG, 410FG, 460FG, 490FG, 510FG
360AR, 410AR
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,
LTEH36, LTFH32, LTFH36
240
30
50
30
30
40
30
Vanderbijlpark Steel
Delfos Boulevard
Vanderbijlpark, 1911
PO Box 2, Vanderbijlpark 1900
Tel +27 (0)16 889 2657 Fax +27 (0)16 889 5019
Email: mailto:allen.pass@arcelormittal.com
Web:http://www.arcelormittal.com
Certificate No. MD00/1404/0008/1 Expiry date: 08/05/2014
Page
61
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Durban
Steelmaking
Plates
As below
A
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 360FG, 410FG, 460FG, 490FG,
510FG
A
360, 410
A, B
A, B
Normal Strength
Boiler & Pressure Vessel
Normal Strength
Normal Strength
Steelmaking
Semi-Finished
E.A.F. / Ingot
Blooms
Tel. +27 (0)13 690 9911/9623 Fax. +27 (0)13 690 9559
EMail mailto:jacoline@highveld.co.za
Web http://www.highveld.co.za
Certificate No. MD00/0672/0005/1 Expiry date: 04/07/2013
Spain
ACERALAVA S.A.
Bilbao
Billets
Bars
Bars
Structural
As below
carbon, carbon-manganese, alloy, austenitic
stainless, duplex stainless, Ferritic Stainless
Steel*, Martensitic Stainless Steel*
carbon, carbon-manganese, alloy, austenitic
stainless, duplex Stainless, Ferritic Stainless
Steel*, Martensitic Stainless Steel*
carbon, carbon-manganese, alloy, austenitic
stainless, duplex stainless, Ferritic Stainless
Steel*, Martensitic Stainless Steel*
carbon, carbon-manganese, alloy, austenitic
stainless, duplex stainless, ferritic stainless*,
martensitic stainless*
470
470
470
470
Tel: +34 945 891461 Fax: +34 945 393001 email: carrieta@tubacex.es
* accepted for approved applications.
Approval also includes ingots up to 5 tonne.
Certificate No. MD00/0054/0005/1 Expiry date: 21/01/2013
ACERINOX EUROPA S.A.U.
Cadiz
Steelmaking
Plates
Coil
As below
304L, 316L, 321, 347
304L, 316L, 321, 347
Steelmaking
Bars
austenitic stainless
304L, 316L, 321
100
carbon, carbon-manganese
carbon, carbon-manganese
235
Normal Strength
Higher Strength
A, B, D, E
DH40, EH40, FH27S, FH32, FH36, FH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360FG, 410FG, 460FG, 490FG, 510FG
50
20
Palmones
11379 Los Barrios
Cadiz
Bilbao
Larrabarria 1
48150 Larrondo-Loiu
Vizcaya
Tel: +34 944 868 435 Fax: +34 944 531 392 Email: mailto:pedro.madrid@olarra.com
Certificate No. MD00/1753/0005/1 Expiry date: 09/09/2012
ARCELOR MITTAL ESPAA
Gijon
Steelmaking
Semi-Finished
Factora de Avils
Apartado 90
33402 Avils
Asturias
Gijon
Plates
Page
62
80
25
80
80
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
As below
A
A
A
Factori de Gijn
Apartado 570
33200 Gijn
Barcelona
Steelmaking
Semi-Finished
Sections
Bars
180
50
35
Tel: +34 630 970 990 Fax: +34 93 773 0552 Email:mailto:npoch@gcelsa.com Web:http://www.celsa.com
Approved for the supply of continuously cast billets up to 180 x 180 mm.
Certificate No. MD00/0343/0007/1 Expiry date: 22/03/2013
Steel types carbon and carbon-manganese cover the supply of billets for processing into normal strength steels according to the Society's Rules for the
Manufacture, Testing and Certification of Materials, Chapter 3. The final processing mill is responsible for ordering steel which complies with their approved
chemical composition and enables them to achieve the required mechanical properties
GERDAU SIDENOR FABRICA DE REINOSA
Bilbao
Steelmaking
Bars
E.A.F. / Ingot
Normal Strength
Machinery
Chain Cable Stock
As below
A
carbon, carbon-manganese, alloy
R3, R3S, R4, API-2F, R5
220
220
185
Tel: +34 942 775 187 Fax: +34 942 775 283 Email: mailto:josem.baz@gerdau.es Web http://www.sidenor.com
The approval for bars for chain cable stock grades R3 and R3S are restricted to supply to Vicinay Cadenas S.A. to purchasing specification CC-R3-R3S.
The approval for bars for chain cable stock grades R4 and R5* are restricted to supply to Vicinay Cadenas S.A. to purchasing specification MP-R4S.
The approval for bars for chain cable stock in Grade R4 to 130mm diameter manufactured by con cast steelmaking at Fabrica de Basauri, rolling at Azkoita
Plant, finishing at Reinosa are restricted for supply to Vicinay Cadenas S.A. to purchasing specification MP-R4S.
The latest issue of the Vicinay purchasing specifications are accepted subject to these maintaining the required material conditions under which approval was
granted.
Certificate No. MD00/0546/0010/1 Expiry date: 20/06/2014
HIERROS MARCELINO FRANCO S.A.
Gijon
Fabricated Sections
Normal Strength
Higher Strength
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
25
25
Sections
Normal Strength
Higher Strength
A
AH32, AH36, DH32, DH36, EH32, EH36, FH32,
FH36
25
11
Sections
Normal Strength
Higher Strength
A
DH32, DH36
25
14
Tel: +34 985 56 60 67 Fax: +34 985 566 653 EMail mailto:hifransa@infonegocio.com
Certificate No. MD00/2778/0004/1 Expiry date: 30/01/2013
LAMINADOS LOSAL, S.A.
Bilbao
Bekoibarra, 9
P.O. Box 17
48300 - Gernika
San Sebastian
Tel: +34 943 857311 Fax: +34 943 857312 Email: mailto:rugui@rugui.com Web http://www.rugui.com
The approved sections are in the form of flat bars up to a width of 150mm.
Certificate No. MD00/1915/0005/1 Expiry date: 06/02/2014
SIDENOR INDUSTRIAL S.L.
Bilbao
Steelmaking
Semi-Finished
Bars
Page
63
As below
As below
carbon, carbon-manganese, alloy
R3, R3S, R4, API-2F, R5
U2, U3
300
100
78
100
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
Fabrica de Basauri
Bo. Ugarte, S/N
P.O. Box 76
LR Office
Product
Category
Grade
Tel +34 944 871729 Fax +34 944 871826 Email: mailto:alberto_cubero@sidenor.com
The approval for bars for chain cable stock grades R3 and R3S are restricted to supply to Vicinay Cadenas S.A. to purchasing specification CC-R3-R3S.
The approval for bars for chain cable stock grade R4 is restricted to supply to Vicinay Cadenas S.A. to purchasing specification CC-R4.
The approval for bars for chain cable stock grade R5 is restricted to supply to Vicinay Cadenas S.A. to purchasing specification MP-R5.
The latest issue of the Vicinay purchasing specifications are accepted subject to these maintaining the required material conditions under which approval was
granted.
Certificate No. MD00/0051/0007/1 Expiry date: 22/01/2012
SIDENOR INDUSTRIAL S.L.
Bilbao
Steelmaking
Bars
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
37
37
E.A.F./Ingot/Con Cast
Machinery
Chain Cable Stock
120
120
123
Fabrica de Vitoria
C/Portal De Gamarra, No. 22
01013 Vitoria (Alava)
Tel: +34 945 164649 Fax: +34 945 164748 Email: mailto:esther_ureta@sidenor.com
Certificate #: MD00/2076/0005/1 Expiry date: 01/02/2012
SIDENOR INDUSTRIAL S.L. (Gerdau Sidenor)
San Sebastian
Steelmaking
Bars
Planta de Legazpi
C/Urola 10
Apartado 55
20230 Legazpi (Guipuzcoa)
Tel: +34 943 038 003 Fax: +34 943 038 013 Email mailto: sidenor_direccion_comercial@sidenor.com. Web http://www.sidenor.com
Approved for the manufacture of ingots and continuous cast blooms.
Bars for chain cable by the continuous cast route.
The approval for bars for chain cable stock grades R3 and R3S are restricted to supply to Vicinay Cadenas S.A. to purchasing specification CC-R3-R3S.
The latest issue of the Vicinay purchasing specifications are accepted subject to these maintaining the required material conditions under which approval was
granted.
Certificate #: MD00/0433/0008/1 Expiry date: 28/07/2011
SIDENOR INDUSTRIAL S.L. (Gerdau Sidenor)
San Sebastian
Bars
Machinery
Chain Cable Stock
200
117
123
150
152
Sweden
AB SANDVIK MATERIALS TECHNOLOGY
Stockholm
Steelmaking
Semi-Finished
Bars
Bars
Structural
Machinery
austenitic
austenitic
austenitic
austenitic
austenitic
austenitic
austenitic
austenitic
austenitic
stainless,
stainless,
stainless,
stainless,
stainless,
stainless,
stainless,
stainless,
stainless,
duplex
duplex
duplex
duplex
duplex
duplex
duplex
duplex
duplex
stainless
stainless
stainless
stainless
Stainless
stainless
stainless
stainless
stainless
6
265
150
195
185
185
185
SE-811 81 Sandviken
Tel: +46 (0) 26 26 3792 Fax: +46 (0) 26 26 3785 Email: mailto:per.yhr@sandvik.com Web http://www.smt.sandvik.com
Certificate No. MD00/2173/0005/1 Expiry date: 31/10/2012
Semi Finished products austenitic and duplex stainless steel con-cast Blooms to 365mm wide, to 7500mm long; Con-cast Billets to 150mm wide, to 6200mm long;
As rolled billets to 195mm wide, to 6000mm long; semi-finished as rolled bars to 185mm diameter, 6900mm long for further processing for Rolled, Forged
Products
Page
64
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
OUTOKUMPU STAINLESS AB
Stockholm
Steelmaking
Plates
As below
304L, 304LN, 316L, 321, 347
UNS S31803, UNS 32205*
304L, 316L, 321, 347
Tel: +46 (0)226 81832 Fax: +46 (0)226 813 16 E-mail mailto:michael.larsson@outokumpu.com
*accepted for approved applications
Certificate No. MD00/0131/0006/1 Expiry date: 08/12/2011
OUTOKUMPU STAINLESS AB
Thin Strip Nyby
Stockholm
Coil
Web: http://www.outokumpu.com
Austenitic Stainless
Austenitic Stainless
Duplex Stainless
SE-64480 Torshlla
Tel +46 (0)1634 9000 Fax +46 (0)1634 9014 Email: mailto:claes.gefvenberg@outokumpu
Certificate No. MD00/0132/0005/1 Expiry date: 30/01/2013
OUTOKUMPU STAINLESS AB
Kristinehamn
Plates
50
10
50
Tel: 46 586 47000 Fax: 46 586 47019 Email: mailto:bengt.o.eriksson@outokumpu.com Web: http://www.outokumpu.com
* accepted for approved applications
** Grade UNS 32304 may be accepted as equivalent to 316L as shown in LR Rules when properties meet the Rule requirements.
Certificate Number MD00/1754/0006/1 Expiry date: 14/11/2014
OUTOKUMPU STAINLESS AB
Degerfors Stainless
SE-693 81 Degerfors
Kristinehamn
Bars
Duplex Stainless
200
Sections
Normal Strength
Higher Strength
Bars
Normal Strength
Higher Strength
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
Stockholm
50
50
45
45
Boxholm Works
Box 5
59010 Boxholm
Tel: +46 0142 293600 Fax: +46 0142 293702 Email mailto: ulla.hjartkvist@ovako.com
Certificate No. MD00/0560/0008/1 Expiry date: 27/09/2014
OVAKO BAR AB.
Stockholm
Steelmaking
Sections
Web http://www.ovako.com
E.A.F. / Con Cast
Normal Strength
Higher Strength
Normal Strength
Higher Strength
Machinery
Bars
As below
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
A, B, D, E
AH32, AH36, DH32, DH36, EH32, EH36
carbon, carbon-manganese
50
50
93
93
93
Smedjebacken Works
S-777 80 Smedjebacken
Tel. +46 (0)240 668355 Fax +46 (0)240 668168 EMail mailto: torbjorn.sorhuus@ovako.com Web http://www.ovako.com
Certificate #: MD00/0561/0005/1 Expiry date: 11/06/2013
OVAKO HOFORS AB
Stockholm
Steelmaking
Semi-Finished
Bars
E.A.F. / Ingot
Billets
Bars
Structural
Machinery
Chain Cable Stock
As below
carbon, carbon-manganese,
carbon, carbon-manganese,
carbon, carbon-manganese,
carbon, carbon-manganese,
U3, R3, R3S, R4
alloy
alloy
alloy
alloy
400
450
190
170
165
165
165
165
Se-813 82 HOFORS
Tel: +46 (0) 298 25000 Fax: +46 0298 25025 Email: mailto:bjorn.olsson@ovako.com Web: www.ovako.com
Certificate No. MD00/1167/0005/1 Expiry date: 28/11/2011
OVAKO HOFORS AB
Kristinehamn
Bars
Structural
Machinery
Chain Cable Stock
Bar Division
Hllefors
71280 Hllefors
Tel: +46 591 60375 Fax: +46 591 60623 Email: mailto:lilian.olovsdotter@ovako.com
Certificate No. MD00/3747/0001/1 Expiry date: 17.12.2011
Page
65
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
SSAB EMEA AB
Stockholm
Steelmaking
Semi-Finished
Plates
As below
As below
A, B, D, E
FH27S
AH27S, AH32, AH36, AH40, AH42, DH27S,
DH32, DH36, DH40, EH27S, EH36
DH42, EH32, EH40, EH42, FH32, FH36, FH40,
FH42
AH46, AH50, AH55, AH62, AH69, DH46, DH50,
DH55, DH62, DH69, EH46, EH50, EH55, EH62,
EH69, FH46, FH50, FH55, FH62, FH69
460FG, 490FG, 510FG
360FG, 410FG
LTAH27S, LTAH32, LTAH36, LTAH40,
LTDH27S, LTDH32, LTDH36, LTDH40,
LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,
LTFH32, LTFH36, LTFH40
60
75
40
OXELSUND
S-61380 Oxelsund
Tel +46 155 254783 Fax +46 155 254082 Email: mailto:sten.bielmrot@oxelosund.ssab.se Web:http://www.ssab.com
All plates with specified through thickness properties.
Semi-finished products in carbon and carbon-manganese steel with fine grain (element combinations as stated), slabs to 1680 mm wide, to 11000mm long of
maximum weight 30T for further processing to rolled products
Materials Quality Scheme Approved - Approval No. MQS 049
Certificate No. MD00/1282/0009/1 Expiry date: 25/04/2013
Switzerland
STAHL GERLAFINGEN AG
Stuttgart
Steelmaking
Sections
As below
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36
As below
carbon, carbon-manganese
A, B, D, E
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
15
10
Bahnhofstrasse
CH-4563 Gerlafingen
Tel: +41 (0)32 674 2568 Fax: +41 (0)32 674 2842 Email: hjopatz@stahl-gerlafingen.com
Certificate No. MD00/3438/0002/1 Expiry date: 01/03/2014
Kaohsiung
Steelmaking
Semi-Finished
Plates
270
50
75
40
50
Tel: +886 7 802 1111 ext 2208 Fax: +886 7 805 1292
Email: 153171@mail.csc.com.tw
Web page: www.csc.com.tw
Specified through thickness properties for all grades and thicknesses, the notations Z25 and Z35 may be added
Certificate No. MD00/0304/0006/1 Expiry date: 06/04/2014
DRAGON STEEL CORPORATION
100, Longchang Road,
Longjing Dist.,
Taichung City
Kaohsiung
Sections
Higher Strength
26
Sections
Normal Strength
Higher Strength
Normal Strength
A
AH32, AH36
A
15
12
25
Tel No. +886 4 2630 6088 EXT 6515 Fax No. +886 4 2630 6041
Email 022349@dragonsteel.com.tw
Web www.dragonsteel.com.tw
Certificate no MD00/3768/0003/1 Expiry date: 03/04/2013
T. S. STEEL COMPANY LTD.
Kaohsiung
Bars
No.6 Kon-Sixth Road
Tsuang-Hine Industrial Zone
Hsen-Kang Road
Chang-Hua Hsien
Page
66
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Taipei
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese
Miao Li Works
No.22, Pingding Erhu Village,
Sihu Township,
Miaoli County 36842,
Tel: +88 637 92333 Fax: +88 637 923311 Email mailto:h32wht@tunghosteel.com Web http://www.tunghosteel.com
Certifcate Number: MD00/3719/0001/1 Expiry date: 15/12/2012
TUNG HO STEEL ENTERPRISE CORP.
Taipei
Sections
Normal Strength
Higher Strength
A
AH27S, AH32, AH36
18
18
Kaohsiung Works
No. 8, Chia Hsing Street,
Hsiao Kang,
Kaohsiung City
Tel: +88 6 7802 3131 Fax: +88 6 801 0696 Email mailto:k23@tunghosteel.com Web http://www.tunghosteel.com
Certificate Number: MD00/3720/0001/1 Expiry date: 16/12/2012
WALSIN LIHWA CORP.
Kaohsiung
Steelmaking
Semi-Finished
200
240
Yenshui Plant
3-10 Shi Jou Liau
Chin Shuei Li
Yenshui Chen
737 Tainan Hsien
Tel +886 6 6520911 ext. 407 Fax +886 6 6533076 Email mailto:nina_chen@walsin.com Web http://www.walsin.com
Certificate No. MD00/3063/0003/1 Expiry date: 15/03/2013
Semi Finished Products Austentic & Duplex Stainless slabs to 1300mm wide, to 12000mm long; square billets to 155mm wide, 12000mm long; round billets with
maximum diameter 240mm , to 12000mm long
Thailand
LPN PLATE MILL PUBLIC COMPANY LIMITED
Bangkok
Plates
Normal Strength
Boiler & Pressure Vessel
A
360AR, 410AR
50
40
Plates
Normal Strength
A, B
40
360AR, 410AR
32
Normal Strength
B, D
Bangkok
Chachoengsao
160 Moo 14 Sukhumvit Road
Bangpakong
Chachoengsao 24130
Tel: +66 3883 2056 ext 162 Fax: +66 3853 2370 Email mailto: natthawut.l@spm-plate.com
Certificate No. MD00/2579/0006/1 Expiry date: 01/09/2014
SAHAVIRIYA STEEL INDUSTRIES PUBLIC
COMPANY LIMITED
Bangkok
19
360, 410
19
Normal Strength
B, D
19
360AR, 410AR
19
Prachuab Kirikhan
9M.7 Tumbol Mearumphueng
Amphur Bang Saphan
Prachuab Kirikhan 77140
Page
67
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Naples
Fabricated Sections
Normal Strength
Higher Strength
A
AH32, AH36
E.A.F./Ingot/Con Cast
Structural
Machinery
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese, alloy
As below
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36, FH27S, FH32, FH36
360FG, 410FG, 460FG, 490FG, 510FG
A, B, D, E
AH32, AH36, DH32, DH36, EH27S, EH32, EH36,
FH27S, FH32, FH36
360FG, 410FG, 460FG, 490FG, 510FG
Tunisia
PALESCANDOLO CNT sarl
25
25
Turkey
ASIL CELIK SANAYI VE TICARET A.S.
Istanbul
Steelmaking
Bars
300
220
Tel: +90 224 280 61 00 Fax: +90 224 280 62 00 Email mailto:quality@asilcelik.com.tr
Web http://www.asilcelik.com.tr
Certificate No. MD00/1921/0005/1 Expiry date: 06/05/2013
EREGLI DEMIR VE CELIK FABRIKALARI T.A.S.
Istanbul
Steelmaking
Plates
60
60
60
15
15
15
KDZ. Eregli
67330
Zonguldak
Tel: +90 (0)372 329 3838 Fax: +90 (0)372 323 2598 Email: mailto:kaygoren@erdemir.com.tr
Certificate No. MD00/1951/0009/1 Expiry date: 06/05/2014
ZKAN DEMIR ELIK SANAYI A.S.
Istanbul
Steelmaking
Semi-Finished
Sections
Web http://www.erdemir.com.tr
E.A.F. / Con Cast
Blooms/Billets
Normal Strength
Higher Strength
As below
carbon, carbon manganese
D, E, E
A, B
EH27S, EH32, EH36
AH27S, AH32, AH36, DH27S, DH32, DH36
250
12
25
10
25
As Below
carbon, carbon-manganese
carbon, carbon-manganese
5
150
Ukraine
CJSC DONETSKSTEEL IRON AND STEEL WORKS
Mykolaiv
Steelmaking
Semi-Finished
141 Tkachenko St
Donetsk region
83062 Donetsk
Tel: +38 (0622) 61-27-44 or 61-31-62 Fax: +38 (062) 388 04 21 Email: mailto:oksp@donmz.donetsk.ua
Certificate No. MD00/3134/0003/1 Expiry date: 27/01/2014
JSC "DNERPOTYAZHMASH"
3, Sukhoi Ostrov St.
Post Code 49600
Dnepropetrovsk
Mykolaiv
Steelmaking
E.A.F. / Ingot
carbon, carbon-manganese
Tel: +38 (056) 3703037 Fax: +38 (056) 3703037 Email: main@dtm.dp.ua Web: eee.dtm.dp.ua
Certificate No. MD00/2825/0004/1 Expiry date: 19/09/2013
JSC ELECTROMETALLURGICAL WORKS
DNEPROSPETSSTAL
Mykolaiv
Steelmaking
E.A.F. / Ingot
As below
Bars
Austenitic Stainless
215
Machinery
300
U1, U2, U3
Page
68
85
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Steelmaking
Sections
As below
A, B, D
AH27S, AH32, DH27S, DH32
Steelmaking
Semi-Finished
Plates
As Below
Normal strength, Higher Strength
D, E
B
A
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
360, 410
A
A
Tel: +38 612 223 627 Fax No: +38 612 131 780
Email : OUKN@dss.com.ua
Web http://www.dss-ua.com
Including forged bars and tube blanks ( billets) in all qualities.
Certificate No. MD00/2225/0006/1 Expiry date: 05/07/2013
JSC KRAMATORSK IRON & STEEL WORKS
Mykolaiv
14
14
18.M.Torez, Str.
Kramatorsk, 84303
Donetsk Region
Mykolaiv
Higher Strength
Boiler & Pressure Vessel
Sections
Bars
Normal Strength
Normal Strength
Steelmaking
Semi-Finished
Plates
300
45
50
72
50
22
50
72
8
100
Mykolaiv
Higher Strength
Boiler & Pressure Vessel
As below
Normal strength, Higher Strength
D, E
A, B
AH27S, AH32, AH36, AH40, DH27S, DH32,
DH36, DH40, EH27S, EH32, EH36, EH40
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG
270
50
100
50
50
1, Leporsky St.
Mariupol 87500
Tel: +380 629 467 108 Fax: +380 629 468 441 Telex: 115123 VOLNA UX
Email mailto:sal@@azovstal.com.ua
Web http://www.azovstal.metinvestholding.com
Including plates with specified through thickness properties. Z35 may be applied to all grades and thicknesses
Certificate No. MD00/0779/0008/1 Expiry date: 15/02/2015
PJSC "DONETSK IRON AND STEEL WORKS"
Mykolaiv
Plates
Normal Strength
D
A, B
DH27S, DH32
AH27S, AH32
360AR, 410AR
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
As below
carbon, carbon-manganese, alloy
Steelmaking
Plates
As below
E
A, B, D
DH40, EH40
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR, 460AR
360FG, 410FG
Higher Strength
16
20
16
20
20
122 Tkachenko St
Donetsk 83062
Mykolaiv
250
84306 Kramatorsk
Donetsk Region
Mykolaiv
Higher Strength
Page
69
50
80
25
50
25
80
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
1 Levchenko Street
Mariupol 87504
All grades and thicknesses with specified through thickness properties. Notation Z25 or Z35 may be added.
Tel: +38 (0)0 629 4343 23 Fax: +38 (0)62 5300 39 Web http://www.ilyich.com.ua
Certificate No. MD00/0775/0005/1 Expiry date: 03/07/2013
PJSC ENAKIEVO IRON AND STEEL WORKS
Mykolaiv
Steelmaking
Semi-Finished
Sections
B.O.S. / Ingot
Ingots
Normal Strength
Higher Strength
As below
carbon, carbon-manganese
A, B
AH27S, AH32, AH36, DH27S, DH32
9
11
11
Sections
Normal
Higher
Normal
Higher
A, B, D, E
AH32, AH36, DH32, DH36
A, B, D, E
AH32, AH36, DH32, DH36
12
12
50
50
High Strength
18
30
20
As below
Normal Strength
A
Metallurgov Avenue, 9
Yenakievo
Donetsk region
86429
Tel +38 (0)6252 92318 Fax +38 (0)6252 92235 Telex 115738"shlak"
Email:yurly.anikanov@enakievosteel
Certificate No. MD00/3121/0003/1 Expiry date: 05/12/2013
United Kingdom
CAPARO MERCHANT BAR PLC.
Scunthorpe
Bars
Strength
Strength
Strength
Strength
Caparo House
P.O. Box 15
Scunthorpe
DN16 1XL
Liverpool
Fabricated Sections
Higher Strength
Southampton
Steelmaking
Semi-Finished
Sections
140
25
Sections Mill
Tremorfa Works
Seawall Road,
Tremorfa,
Cardiff. CF24 5TH
Tel: +44 (0) 1568 615201 Fax: +44 (0) 1568 612626
Certificate No. MD00/3552/0003/1 Expiry date: 16/12/2014
Concast blooms/billets covers billets to 140mm x140mm and concast 'mini slabs' to 280 x 120mm.
NIAGARA (HOT ROLLED)
Bars
Normal Strength
50
Higher Strength
32
50
Normal Strength
Higher Strength
50
Peartree Lane
Woodside, Dudley
West Midlands DY2 0QS
Tel: +44 (0) 1384 471200 Fax: +44 (0)1384 471201 Email: mailto:hotrolled@niag.com Web: http://www.niag.com
Certificate No. MD00/2618/0006/1 Expiry date: 21/02/2013
OUTOKUMPU STAINLESS LTD.
Scunthorpe
Steelmaking
Semi-Finished
Page
E.A.F/A.O.D/L.A.F/ConCast
Ingots
Slabs
Blooms/Billets
70
stainless
stainless
stainless
stainless
steel
steels
steel
steel
5
30
30
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
The approval for steelmaking and ingots, slabs, blooms and billets in stainless steel covers the supply of austenitic, duplex, ferritic, martensitic and precipitation
hardening grades, in accordance with the Society's Rules for the Manufacture, Testing and Certification of Materials, Chapter 3 or appropriate international or
national standards. The final processing mill is responsible for ordering steel which complies with their surface and internal quality standards and approved
chemical composition to enables them to achieve the required physical and mechanical properties.
Tel: +44 (0)114 2616292 Fax: +44 0114 2616163
Email: mailto:richard.firman@outokumpu.com
Web: http://www.outokumpu.com
Certificate No. MD00/1883/0006/1 Expiry date: 03/01/2013
SHEFFIELD FORGEMASTERS INTERNATIONAL
LTD.
P.O. Box 286
Brightside Lane
Sheffield S9 2RW
Scunthorpe
Steelmaking
E.A.F. / Ingot
Plates
Normal Strength
E
A, B, D
FH40
FH32, FH36
AH42, AH46
AH40, DH40, DH42, DH46, EH40, EH42, EH46
AH32, AH36, DH32, DH36, EH32, EH36
460FG, 490FG, 510FG
360FG, 410FG
LTFH40
LTAH32, LTAH36, LTAH40, LTDH32, LTDH36,
LTDH40, LTEH32, LTEH36, LTEH40, LTFH32,
LTFH36
Glasgow
Higher Strength
50
100
25
30
36
65
75
75
100
25
30
Dalzell
Motherwell ML1 1PU
Tel: +44 (0)1698 266100 Fax: +44 (0) 1698 266100 Ext. 394 Web page http:\\www.corusgroup.com
All plates with specified through thickness properties.
Materials Quality Scheme Approved - Approval No. MQS030
Certificate No. MD00/0235/0009/1 Expiry date: 19/05/2014
TATA STEEL (UK) LTD
Scunthorpe
Steelmaking
Semi-Finished
Plates
B.O.S./Ingot/Con Cast
Slabs
Blooms/Billets
Normal Strength
Higher Strength
Sections
Normal Strength
Higher Strength
As below
carbon, carbon-manganese
carbon, carbon-manganese
E
B, D
A
FH40, FH42, FH46
AH40, AH42, AH46, DH40, DH42, DH46, EH40,
EH42, EH46
FH32, FH36
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
360AR, 410AR
360FG, 410FG, 460FG, 490FG, 510FG
360, 410
LTAH27S, LTAH32, LTAH36, LTAH40,
LTDH27S, LTDH32, LTDH36, LTDH40,
LTEH27S, LTEH32, LTEH36, LTEH40
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
305
355
50
60
80
25
30
50
70
40
70
80
30
50
50
Scunthorpe
P.O. Box 1
Scunthorpe DN16 1BP
Middlesbrough Sections
Normal Strength
Higher Strength
Page
71
A, B, D, E
AH27S, AH32, AH36, DH27S, DH32, DH36
77
77
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
Teesside
Redcar
Teesside
LR Office
Product
Category
Grade
TS10 5RD
Email: mailto:Robin.Davies@corusgroup.com
Normal Strength
A, B, D, E
20
Higher Strength
AH40, DH40
15
20
Skinningrove
P.O. Box 1
Saltburn by the Sea
TS13 4ET
Tel: +44 (0)1287 640212 Fax: +44 (0)1287 643467 Email: mailto:Bary.Atkinson@corusgroup.com
Materials Quality Scheme Approved - Approval No. MQS032
Certificate #: MD00/0243/0010/1 Expiry date: 18/08/2014
TATA STEEL (UK) LTD
As below
Slabs
carbon, carbon-manganese
295
Blooms/Billets
carbon, carbon-manganese
305
Structural Sections
carbon, carbon-manganese
16
Corby Works
P.O. Box 101, Weldon Road
Corby
Northamptonshire
NN17 5UA
Tel: +44 (0)1536 404704 Fax: +44 (0)1536 404212 Email: mailto:stewart.jeffrey@tatasteel.com Web: http://www.tatasteel.com
Includes fabricated hollow sections
Certificate No. MD00/0234/0001/1 Expiry date: 26/02/2015
TATA STEEL UK LIMITED
Fabricated Sections
Normal Strength
20
Higher Strength
20
Structural Sections
20
Hartlepool Works
20 Inch H.F.I. Pipe Mill
Brenda Road
Hartlepool
Teeside TS25 2EG
Tel: +44 (0)1429 527249 Mob: +44 (0)7743 842969 Email: mailto:david.evans@tatsteel.com Web:http://www.tatasteeleurope.com
Certificate #: MD00/0236/0007/1 Expiry date: 10/09/2014
TATA STEEL UK LIMITED
Scunthorpe
Steelmaking
Semi-Finished
Bars
E.A.F./Ingot/Con Cast
Ingots
Semi-finished Products
Machinery
Chain Cable Stock
13
381
300
165
Steelmaking
Semi-Finished
As below
carbon, carbon-manganese
238
Liverpool
Page
72
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
Port Talbot Works
Port Talbot
SA13 2NG
LR Office
Product
Category
Grade
Tel: +44 (0)1698 266100 Fax: +44 (0) 1698 266100 Ext. 394 Web page http:\\www.corusgroup.com
Approval covers concast slabs to nominal size 1850mm wide x 10,000mm long to the maximum thickness for further processing to rolled products.
Certificate No.: MD00/3909/0001/1 Expiry Date: 05.05.2014
Chicago
Steelmaking
Plates
As below
D
A, B
AH27S, AH32, AH36, DH27S, DH32, DH36,
EH27S, EH32, EH36
35
50
75
Tel: +1 219 787 4553 Fax: 1 219 787 2139 Email mailto:daniel.elwood@mittalsteel.com
Certificate No. MD00/2331/0005/1 Expiry date: 18/12/2012
ELLWOOD QUALITY STEEL COMPANY
Chicago
Steelmaking
Semi-Finished
E.A.F. / Ingot
Ingots
Steelmaking
Plates
As below
A, B
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36
360AR, 410AR
360FG, 410FG
50
12
40
50
E
A, B, D
AH27S, AH32, AH36, DH27S, DH32, DH36,
DH40
360FG, 410FG, 460FG, 490FG, 510FG
51
102
102
102
As below
A
360FG, 410FG
A
AH27S, DH27S, AH32, DH32, AH36, DH36
20
20
20
13
38
Philadelphia
248
75
Tel No. +01 302 792 5400 Fax No. +01 302 792 0203
Email: scott. diestelkamp@EvrazIncNA.com
Web: www.EvrazIncNA.com
Certificate No. MD00/3833/0001/1 Expiry date: 22/09/2013
EVRAZ OREGON STEEL MILLS
Los Angeles
Houston
Plates
Normal Strength
Higher Strength
Boiler & Pressure Vessel
Tel: +1 281 383 5100 Fax: +1 281 383 1803 Email mailto: bankim.shukla@jswsteel.us
Certificate No. MD00/3505/0002/1 Expiry date: 26/08/2014
NUCOR STEEL TUSCALOOSA INC.
New Orleans
Steelmaking
Hot Rolled Coil
Plates from coils
Web: http://www.jswsteel.com
E.A.F. / Con Cast
Normal Strength
Boiler & Pressure Vessel
Normal Strength
Higher Strength
Page
73
As at 21 May 2012
List 1
Approved Steelmakers and Manufacturers of
Rolled Steel Plates, Strip, Sections & Bars
Name and Address
LR Office
Product
Category
Grade
Chicago
Steelmaking
Semi-Finished
Bars
E.A.F./Ingot/Con Cast
Ingots
Semi-finished Products
As below
carbon, carbon-manganese, alloy
carbon, carbon-manganese
Tel: +1 330 438 5541 Fax: +1 330 438 5213 Email: mailto:dwalvoord@republicengineered.com Web: http://www.republicengineered.com
Ingots as semi finished products, nominal 740mm diameter x 4800mm, are approved for further processing for forgings to the maximum un-cropped weight
shown above.
Certificate #: MD00/2236/0005/1 Expiry date: 15/05/2013
SSAB ALABAMA, INC.
New Orleans
Steelmaking
Plates
As below
D
A, B
AH27S, AH32, AH36, DH32, DH36
360FG, 410FG, 460FG, 490FG, 510FG
35
50
38
38
Chicago
Steelmaking
Semi-Finished
E.A.F./Ingot/Con Cast
Bars
As below
carbon, carbon-manganese, alloy
330
TTel: +1 330 471 3263 Fax: +1 330 471 4077 Email: mailto:robert.w.hoff@timken.com Werb: http://www.timken.com
Bars as Semi Finished Products approved for further processing for forgings and for use as billets for seamless tube production.
Certificate No. MD00/1510/0005/1 Expiry date: 12/01/2014
Page
74
As at 21 May 2012