HCM634H - Technical Data Sheet

HCM634H
SPECIFICATIONS & OPTIONS
TERMINALS & TERMINAL BOX Standard generators feature a main stator with 6 ends brought out to the terminals, which are mounted on the frame at the non-drive end of the generator. A sheet steel terminal box contains the AVR and provides ample space for the customers' wiring and gland arrangements. It has removable panels for easy access.

STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications can be considered on request.

VOLTAGE REGULATORS MX321 AVR - STANDARD

SHAFT & KEYS This sophisticated Automatic Voltage Regulator (AVR) is incorporated into the Stamford Permanent Magnet Generator (PMG) system and is fitted as standard to generators of this type. The PMG provides power via the AVR to the main exciter, giving a source of constant excitation power independent of generator output. The main exciter output is then fed to the main rotor, through a full wave bridge, protected by a surge suppressor. The AVR has in-built protection against sustained overexcitation, caused by internal or external faults. This de-excites the machine after a minimum of 5 seconds. Over voltage protection is built-in and short circuit current level adjustment is an optional facility. All generator rotors are dynamically balanced to better than BS6861:Part 1 Grade 2.5 for minimum vibration in operation. Two bearing generators are balanced with a half key.

INSULATION/IMPREGNATION The insulation system is class 'H'. All wound components are impregnated with materials and processes designed specifically to provide the high build required for static windings and the high mechanical strength required for rotating components.

WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This eliminates triplen (3rd, 9th, 15th ) harmonics on the voltage waveform and is found to be the optimum design for trouble-free supply of non-linear loads. The 2/3 pitch design avoids excessive neutral currents sometimes seen with higher winding pitches, when in parallel with the mains. A fully connected damper winding reduces oscillations during paralleling. This winding, with the 2/3 pitch and carefully selected pole and tooth designs, ensures very low waveform distortion.

QUALITY ASSURANCE Generators are manufactured using production procedures having a quality assurance level to BS EN ISO 9001. The stated voltage regulation may not be maintained in the presence of certain radio transmitted signals. Any change in performance will fall within the limits of Criteria 'B' of EN 61000-6-2:2001. At no time will the steady-state voltage regulation exceed 2%.

NB Continuous development of our products entitles us to change specification details without notice, therefore they must not be regarded as binding. Front cover drawing typical of product range.

HCM634H
WINDING 312
CONTROL SYSTEM A.V.R. VOLTAGE REGULATION SUSTAINED SHORT CIRCUIT INSULATION SYSTEM PROTECTION RATED POWER FACTOR STATOR WINDING WINDING PITCH WINDING LEADS STATOR WDG. RESISTANCE ROTOR WDG. RESISTANCE EXCITER STATOR RESISTANCE EXCITER ROTOR RESISTANCE R.F.I. SUPPRESSION WAVEFORM DISTORTION MAXIMUM OVERSPEED BEARING DRIVE END BEARING NON-DRIVE END 1 BEARING WEIGHT COMP. GENERATOR WEIGHT WOUND STATOR WEIGHT WOUND ROTOR WR INERTIA SHIPPING WEIGHTS in a crate PACKING CRATE SIZE 2117 kg 1010 kg 866 kg 20.0438 kgm 2173 kg 183 x 92 x 140(cm) 50 Hz TELEPHONE INTERFERENCE COOLING AIR VOLTAGE STAR VOLTAGE DELTA 380/220 220 THF<2% 1.614 m/sec 3420 cfm 400/231 230 785 415/240 240 805 440/254 254 770 416/240 240 885
2

SEPARATELY EXCITED BY P.M.G. MX321 0.5 % With 4% ENGINE GOVERNING

REFER TO SHORT CIRCUIT DECREMENT CURVES (page 7) CLASS H IP23 0.8 DOUBLE LAYER LAP TWO THIRDS 6 0.0025 Ohms PER PHASE AT 22C STAR CONNECTED 1.88 Ohms at 22C 17 Ohms at 22C 0.079 Ohms PER PHASE AT 22C BS EN 61000-6-2 & BS EN 61000-6-4,VDE 0875G, VDE 0875N. refer to factory for others NO LOAD < 1.5% NON-DISTORTING BALANCED LINEAR LOAD < 5.0% 2250 Rev/Min BALL. 6224 (ISO) BALL. 6317 (ISO) 2 BEARING 2145 kg 1010 kg 821 kg 19.4965 kgm2 2180 kg 183 x 92 x 140(cm) 60 Hz TIF<50 1.961 m/sec 4156 cfm 440/254 254 931 460/266 266 970 480/277 277 994

kVA BASE RATING FOR 765 REACTANCE VALUES Xd DIR. AXIS SYNCHRONOUS 2.51 X'd DIR. AXIS TRANSIENT 0.21 X''d DIR. AXIS SUBTRANSIENT 0.15 Xq QUAD. AXIS REACTANCE 1.49 X''q QUAD. AXIS SUBTRANSIENT 0.16 0.08 XL LEAKAGE REACTANCE 0.17 X2 NEGATIVE SEQUENCE 0.03 X0 ZERO SEQUENCE REACTANCES ARE SATURATED T'd TRANSIENT TIME CONST. T''d SUB-TRANSTIME CONST. T'do O.C. FIELD TIME CONST. Ta ARMATURE TIME CONST. SHORT CIRCUIT RATIO

2.33 2.22 1.89 2.91 2.74 2.61 2.46 0.20 0.19 0.16 0.25 0.24 0.23 0.21 0.14 0.13 0.11 0.16 0.16 0.15 0.14 1.38 1.32 1.12 1.73 1.63 1.55 1.46 0.15 0.14 0.12 0.19 0.18 0.17 0.16 0.07 0.06 0.05 0.09 0.08 0.07 0.07 0.16 0.15 0.12 0.20 0.18 0.18 0.17 0.02 0.02 0.02 0.03 0.03 0.02 0.02 VALUES ARE PER UNIT AT RATING AND VOLTAGE INDICATED 0.185 s 0.025 s 2.44 s 0.04s 1/Xd

50 Hz

HCM634H
Winding 312 THREE PHASE EFFICIENCY CURVES

60 Hz

HCM634H
Winding 312 THREE PHASE EFFICIENCY CURVES

HCM634H
Winding 312 Locked Rotor Motor Starting Curve

50
Hz
30
346V 380V 400V 415V 440V

25

PER CENT TRANSIENT VOLTAGE DIP .

20

15

10

0 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400
LOCKED ROTOR kVA

60
Hz
30
380V 416V 440V 460V 480V

25

PER CENT TRANSIENT VOLTAGE DIP .

20

15

10

0 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800
LOCKED ROTOR kVA

HCM634H
Three-phase Short Circuit Decrement Curve. No-load Excitation at Rated Speed Based on star (wye) connection.

50 Hz

100000

CURRENT (Amps)

SYMMETRICAL ASYMMETRICAL

10000

1000 0.001

0.01

0.1 TIME (secs)

10

Sustained Short Circuit = 3,300 Amps

60 Hz

100000

CURRENT (Amps)

SYMMETRICAL ASYMMETRICAL

10000

1000 0.001

0.01

0.1 TIME (secs)

10

Sustained Short Circuit = 4,100 Amps

Note 1 The following multiplication factors should be used to adjust the values from curve between time 0.001 seconds and the minimum current point in respect of nominal operating voltage : 50Hz
Voltage 380v 400v 415v 440v Factor X 1.00 X 1.07 X 1.12 X 1.18

Note 2 The following multiplication factor should be used to convert the values calculated in accordance with NOTE 1 to those applicable to the various types of short circuit :
3-phase 2-phase L-L 1-phase L-N

60Hz
Voltage 416v 440v 460v 480v Factor X 1.00 X 1.06 X 1.12 X 1.17

The sustained current value is constant irrespective of voltage level

Instantaneous x 1.00 x 0.87 x 1.30 Minimum x 1.00 x 1.80 x 3.20 Sustained x 1.00 x 1.50 x 2.50 Max. sustained duration 10 sec. 5 sec. 2 sec. All other times are unchanged Note 3 Curves are drawn for Star (Wye) connected machines. For Delta connection multiply the Curve current value by 1.732

HCM634H
Winding 312 / 0.8 Power Factor RATINGS
Class - Temp Rise Cont. E - 65/50C 380 220 590 472 400 230 605 484 95.7 506 415 240 620 496 95.7 518 440 254 600 480 95.7 502 380 220 638 510 95.6 534 Cont. B - 70/50C 400 230 656 525 95.7 548 415 240 675 540 95.7 564 440 254 675 540 95.7 564 380 220 700 560 95.5 586 Cont. F - 90/50C 400 230 720 576 95.6 603 415 240 740 592 95.6 619 440 254 715 572 95.7 598 Cont. H - 110/50C 380 220 765 612 95.4 642 400 230 785 628 95.5 658 415 240 805 644 95.5 674 440 254 770 616 95.6 644

50
Hz

Star (V) Delta (V) kVA kW

Efficiency (%) 95.7 kW Input 493

60
Hz

Star (V) Delta (V) kVA kW

416 240 688 550

440 254 725 580 95.5 607

460 266 756 605 95.6 633

480 277 775 620 95.6 649

416 240 713 570 95.5 597

440 254 750 600 95.5 628

460 266 780 624 95.6 653

480 277 800 640 95.6 669

416 240 819 655 95.4 687

440 254 863 690 95.4 724

460 266 900 720 95.5 754

480 277 925 740 95.5 775

416 240 885 708 95.3 743

440 254 931 745 95.3 782

460 266 970 776 95.4 813

480 277 994 795 95.5 833

Efficiency (%) 95.5 kW Input 576

DIMENSIONS

Barnack Road Stamford Lincolnshire PE9 2NB Tel: 00 44 (0)1780 484000 Fax: 00 44 (0)1780 484100

2006

TD_HCM634H.GB_10.06_03_GB