ALL IN RATES (ARCHITECTURAL WORKS)

Including basic material, labour, P&E, wastage cost but excluding on-cost mark up
S/n Description Rate (RM) Unit
A. BRICKWALL & LIGHTWEIGHT BLOCKWALL
1) 115mm thick brickwall in cement & sand brick reinforced with expanded 31.91 M2
metal brickwork reinforcement at every 4th course

2) 230mm thick brickwall in cement & sand brick reinforced with expanded 63.19 M2
metal brickwork reinforcement at every 4th course

3) 115mm thick brickwall in clay common brick reinforced with expanded metal 43.81 M2
brickwork reinforcement at every 4th course

4) 250mm thick brickwall in clay common brick reinforced with expanded metal 76.76 M2
brickwork reinforcement at every 4th course

5) 450mm thick brickwall in clay common brick reinforced with expanded metal 145.52 M2
brickwork reinforcement at every 4th course

6) Supply and install 125mm thick lightweight AAC block 200mm x 600mm 42.22 M2
using approved thin bed adhesive, including setting out works, damp proof
course, wall tie, fibre mesh, fill up gaps at sides and top edges and all
necessary tools to the completion of blockwall
B. PAINTING
1) Prepare and apply 1 undercoat and 2 finishing coats of emulsion paint to 2.55 M2
plastered surface internally

2) Prepare and apply 1 undercoat and 2 finishing coats of emulsion paint weather 5.39 M2
bond to plastered surface externally

3) Prepare and apply 1 undercoat and 2 finishing coats of enamel paint to metal/ 3.25 M2
 timber surface, not exceeding 300mm girth

4) Prepare and apply 1 undercoat and 2 finishing coats of enamel paint to metal/ 3.04 M2
timber surface, exceeding 300mm girth

5) Prepare and apply 1 undercoat of Alkaline Resisting Wall Sealer and 2 9.26 M2
finishing coats of 4 season acrylic finish to plastered surface
C. FLOOR FINISHES
1) Supply labour and materials to lay 200 x 200mm homogeneous tiles to floor 41.81 M2
(any grade, size, colour and pattern) jointed at 5mm wide and pointed with
approved grout including minimum 20mm thick base screed

2) Supply labour and materials to lay 300 x 300mm homogeneous tiles to floor 63.41 M2
(any grade, size, colour and pattern) jointed at 5mm wide and pointed with
approved grout including minimum 20mm thick base screed

3) Supply labour and materials to lay 200x200mm ceramic tiles to floor (any 54.36 M2
grade, size, colour and pattern) jointed at 5mm wide and pointed with approved
grout including minimum 20mm thick base screed

4) Supply labour and materials to lay 600 x 300mm porcelain tiles to floor (any 74.77 M2
grade, size, colour and pattern) jointed at 5mm wide and pointed with approved
grout including minimum 20mm thick base screed

5) Supply labour and materials to lay 600 x 600mm porcelain tiles to floor (any 123.18 M2
grade, size, colour and pattern) jointed at 5mm wide and pointed with approved
grout including minimum 20mm thick base screed

6) Supply labour and materials to lay 18mm thick polished marble including 265-305 M2
waterproofing impregnator and bedded on screed (measured separately) with
adhesive
7) Supply labour for laying cobble stone tiles 100 x 100mm as specified to floor 132.55 M2
(any grade, colour and pattern) jointed at 8mm wide and pointed with approved
grout including minimum 50mm thick base screed

8) Supply labour and materials to lay Vinyl tiles 305 x 305mm to floor (Imperial 50.97 M2
Series to any color and pattern) jointed at 5mm wide with approved adhesive
including minimum 25mm thick base screed

9) Supply labour for laying interlocking pavers to floor (any grade, size, colour 44.49 M2
and pattern) laid on and including 225 mm thk hardcore and 50 mm thk sand
blinding

10) Supply and lay heavy duty carpet with underlay to floor including carpet 96.58 M2
adhesive but not including cement and sand backing screed

11) Supply and apply 4mm thick skim coat to sides and soffit of beam/ slab 5.60 M2
D. FLOOR SCREED & COATINGS
1) 25mm thick cement and sand (1:3) screed rendering to ground floor trowelled 13.74 M2
to a smooth finish including coved and rounded angles

2) Prepare and apply PU epoxy coating Mackincote PU54 to floor rolled to a 22.73 M2
smooth finish including coved and rounded angles

3) 5mm thick acrylic polymer cementitious screed Bondseal rendering to ground 27.26 M2
floor trowelled to a smooth finish including coved and rounded angles

4) Prepare and apply waterproofing coating to floor rolled to a smooth finish 23.83 M2
E. CEILING FINISHES
1) Supply and apply 3mm thick skim coat (Smooth finish) to soffit of concrete 6.00 M2

2) Supply labour and materials to lay 3.2 mm thick asbestos flat sheet to 20.98 M2
ceiling suspended by and including metal ceiling grid
3) Supply labour and materials to lay 15 mm thick acoustic mineral fibre board 33.82 M2
to ceiling suspended by and including metal ceiling grid

4) Supply labour and materials to lay 15mm thick ascoustic mineral fibre board 38.32 M2
fixed on & including galvanized steel suspension ceiling

5) 9mm thick 600x1200 gypsum plasterboard fixed on & including suspended 17.50 M2
ceiling tee

6) 9mm thick plasterboard fixed on and including galvanized steel suspension 23.70 M2
ceiling

7) Supply and install 9mm thick approved moisture resistant plasterboard ceiling 35.00 M2
inluding aluminium suspension tee system levelling and setting out
symetrically from centre of the room and necessary trimming and cutting for
light points, access panels etc; height not exceeding 3.0m high

8) Supply and install 9mm thick approved moisture resistant plasterboard ceiling 45.00 M2
inluding aluminium suspension tee system levelling and setting out
symetrically from centre of the room and necessary trimming and cutting for
light points, access panels etc; height exceeding 9.0m but not exceeding
10.10m high.
F. WALL FINISHES
1) 25mm thick cement and sand (1:3) rendering to wall in 3 coats trowelled to a 21.05 M2
smooth finish including coved and rounded angles

2) Supply and apply 5mm thick skim coat comprising 1 base coat and 1 finishing 6.99 M2
coat (smooth finish) to all internal RC wall surfaces (excluding surface to
receive tiles) including preparation of surface to receive skim coat

Supply and apply 12mm thick AAC render (Sponge finish) to all external
3) block wall/ RC structure surfaces (beams, columns, lintels and opening 16.50 M2
perimeter) including preparation of surface to receive render coat

Supply labour and materials to lay 300 x 300mm homogeneous tiles to wall
4) (any grade, size, colour and pattern) jointed at 5mm wide and pointed with 65.41 M2
approved grout including minimum 20mm thick base screed

Supply labour and materials to lay 300 x 600mm ceramic tiles to wall (any
5) grade, size, colour and pattern) jointed at 5mm wide and pointed with 48.30 M2
approved grout including minimum 20mm thick base screed

Supply labour and materials to lay 600 x 600mm porcelain tiles to wall (any
6) grade, size, colour and pattern) jointed at 5mm wide and pointed with 75.23 M2
approved grout including minimum 20mm thick base screed
G. METAL & STEEL WORK
1) Supply mild steel grating c/o frame with steel infill including painting with 832.79 M2
galvanizing of steel sizes as specified

2) Supply and install mild steel balcony railing 1200mm high constructed of 64.09 M
50mm x 75mm x 1.2mm thick mild steel rectangular hollow section as top
handrail; 38mm x 38mm x 1.2mm thick mild steel square hollow section as
bottom & intermediate rail; 38mm x 38mm x 1.2mm thickmild steel hollow
section as baluster with bottom end of baluster welded to mild steel plate and
bolted to floor slab with 4 Nos. approved expansion bolts; infilled vertically
between balusters with 25mm x 25mm x 1.2mm thick mild steel square hollow
section at 85mm centres and all framed, welded and fixed into position
including all necessary bends, angles and closing all open ends complete with
red oxide paint to all expored metal work

3) Supply & erect and hoist & fix in position the structural steel elements 5.38 KG
including 1 coat of MIO primer but excluding cranage
H. ROOFING
1) Supply labour and materials to lay Interlocking Concrete Roof Tiles size 420 32.06 M2
x 330 x 30mm including timber battens 50 x 25mm

2) Supply labour and materials to lay Interlocking Clay Roof Tiles size 420 x 55.83 M2
330 x 30mm including timber battens 50 x 25mm

3) Supply labour and materials to lay 0.47mm thick metal roof sheet; 45.00 M2
colorbond
4) 4.13 M2
Supply labour and materials to lay 1250 x 48000 x 0.125mm thick
aluminium foil
5) 12.61 M2
Supply labour and materials to lay 1200 x 7500 x 50mm thick rockwool
insulation (40 kg/m)
6) 26.59 M
Supply labour and materials to fix roof flashing approximate 450mm overall
girth; twice bent; well packed and bedded on cement and sand; one end
fixed to brickwork and the other end dressed under roofing sheets; including
pointing with approved bituminous sealant to watertightness
I. WATERPROOFING
1) Supply and lay damp proof membrane 0.25mm thick 3.94 M

2) Supply and apply three coats of cementitious waterproofing system to 23.49 M2

3) Supply and apply 1.10mm thick liquid applied waterproofing membrane 39.78 M2
system to R.C. flat roof including preparing substrate free from debris, oil,
laitances, etc. but excluding protective screed in cement and sand (1:3) to
R.C. flat roof and perimeter upturn; and excluding primer on top of protective
screed; and including working around scupper drain, dressing around all
rainwater downpipes, vent pipe outlets and any other protution through the
waterproofing membrane