Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    Accuflow Series Low Flow Rate Waterflow Detectors: Sprinkler Systems Monitoring

    Uploaded by

    Argile-asshole
    Water Flow

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Accuflow Series Low Flow Rate Waterflow Detectors: Sprinkler Systems Monitoring

    Uploaded by

    Argile-asshole
    13 views2 pages
    Water Flow

    Original Title

    A05-0290

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Water Flow

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views2 pages

    Accuflow Series Low Flow Rate Waterflow Detectors: Sprinkler Systems Monitoring

    Uploaded by

    Argile-asshole
    Water Flow

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    S P R I N K L E R S Y S T E M S M O N I T O R I N G

    Accuflow™ Series
    Low Flow Rate
    Waterflow Detectors

    Models Available
    LFD30-2
    LFD20
    LFD25-73MM
    LFD25-76MM
    LFD30-2 LFD30-2 (cover removed)

    LFD40

    Replacement Par ts
    WFDW Cover wrench
    546-9000 Cover tamper
    switch kit
    WFDN4 Gasket kit

    Product Overview
    For use in wet pipe water mist systems System Sensor’s Accuflow™ Low Flow Rate detectors are a new line of solid state
    waterflow detectors designed for use in wet pipe water mist systems where low
    Compatible with 2 to 4 inch stainless flow detection is required.
    steel and brass pipe
    Robust Construction. Accuflow low flow detectors consist of a rugged enclosure for
    Solid state retard assures precise indoor and outdoor use. Like all System Sensor waterflow detectors, low flow models
    timing accuracy operate across a wide temperature range, from 32ºF to 120ºF (0°C to 49°C).

    Dipswitch selections simplify Reliable Performance. Accuflow low flow detectors are intended for applications
    retard settings where flow detection of 3 GPM or greater is required. By incorporating a solid state
    retard, proper sensitivity, timing accuracy and switch resetting is assured.
    Non-polarized, two-wire design
    allows connection to a local bell and False Alarm Immunity. The solid state circuitry of Accuflow low flow detectors pro-
    conventional or addressable systems vides greater timing accuracy over traditional mechanical retard designs. This accura-
    cy minimizes the risk of false alarms created by pressure surges or air trapped within
    NEMA 4 rated the sprinkler system.

    Synchronized switches activate Simplified Operation. Accuflow low flow detectors are designed to simplify instal-
    both the alarm panel and local lation. Wired like traditional waterflow detectors, these models do not require the
    bell simultaneously installer to run an additional third wire. Two conduit openings permit easy attach-
    ment to the local alarm system.
    Engineering Specification
    Low flow rate vane-type waterflow detector with solid state retard shall be an Accuflow model number ____________________
    manufactured by System Sensor, and shall be installed on system piping as designated on the drawing and/or as specified
    herein. Detectors shall mount on a stainless steel clear pipe span of the appropriate nominal size, either on a ver tical upflow
    of horizontal run, at least 6” from any fittings which may change water direction, flow rate, or pipe diameter, or no closer
    than 24” from a valve or drain. Detectors shall be compatible with 2” through 4” diameter stainless steel and brass pipe.
    Detectors shall have a sensitivity of 3 gallons (11.35 liters) per minute minimum and a static pressure of 450 psi for 2”
    – 4” diameter pipes. The detector shall respond to water flow in the specified direction after a preset time delay. The delay
    mechanism shall be a solid state unit which is field-adjustable via a dipswitch. The detector’s actuation mechanism shall
    include a polyethylene vane inser ted through a hole in the pipe and connected by a mechanical linkage to the delay mecha-
    nism. Outputs shall consist of one SPDT switch (Form C contact) and one SPST switch (normally open contact) for wiring to
    an alarm panel or addressable control module and local bell and/or notification device. Two conduit entrances (one knockout
    type) for standard fittings of commonly used electrical conduit shall be provided on the detectors. A grounding provision shall
    be provided. Unless noted, enclosures shall be NEMA 4 listed by Under writers Laboratories, Inc. for indoor or outdoor use.

    Standard Specifications
    Static Pressure Rating Contact Ratings Cover Tamper Switch
    450 PSI One SPDT (Form C) Optional, par t no. 546-9000
    One SPST (normally open) Shipping Weight
    Triggering Threshold Bandwidth (Flow Rate) 0.6 A @ 125 VAC
    3 GPM (11.35 liters/minute) LFD20: 4.1 lbs. (1.8 kg)
    2.0 A @ 30 VDC
    Maximum Surge Voltage Range LFD25-73MM: 4.2 lbs. (1.9 kg)
    18 Feet Per Second (FPS) 8.4-35V (DC-FWR)
    108-132 VAC AFD25-76MM: 4.2 lbs. (2.0 kg)
    Compatible Pipe
    Stainless steel and brass water pipe, Current Draw LFD30-2: 4.4 lbs. (2.1 kg)
    2” through 4” (refer to Ordering Information 300 microamps @ 12/24 V(DC-FWR) LFD40: 5.1 lbs. (2.3 kg)
    below) 400 microamps @ 120 VAC
    Ser vice Use
    Overall Dimensions Installed
    Conduit Entrances Water mist systems where low flow detection
    3.75″ Two openings for 1/2” conduit, one open, one is required.
    knock-out type
    Warranty
    3.0″
    Operating Temperature Range 3 years
    32°F - 120°F (0°C to 49°C)
    U.S. Patent No.
    Enclosure Rating 6,084,521
    U bolt nut 1.6″
    NEMA 4 - suitable for indoor/outdoor use
    Pipe saddle

    Pipe

    Plastic vane

    Model Number Width


    LFD20 4.6″
    U bolt LFD25-73MM 4.6″
    LFD25-76MM 4.6″
    Width: See Table
    LFD30-2 5.2″
    LFD40 5.7″

    Ordering Information
    Model Numbers Nominal Pipe O.D. and Wall Thickness Hole Size Replacement Part Number Description
    LFD20 2” (60.3 mm OD), 3.9 mm to 4.5 mm 1-1/4” 546-9000 Cover tamper switch kit
    LFD25-73MM 2-1/2” (73.0 mm OD), 4.8 mm to 5.2 mm 1-1/4” WFDW Tamper proof wrench for cover
    LFD25-76MM 2-1/2” (76.1 mm OD), 4.3 mm to 4.7 mm 1-1/4” WFDN4 Gasket kit
    LFD30-2 3” (88.9 mm OD), 5.0 mm to 5.6 mm 2”
    LFD40 4” (114.3 mm OD), 5.4 mm to 6.4 mm 2”

    System Sensor Sales and Service


    System Sensor Headquarters System Sensor in Canada System Sensor in China System Sensor in the Far East System Sensor in India
    3825 Ohio Avenue Ph: 905.812.0767 Ph: + 86.29.524.6253 Ph: + 852.21919003 Ph: + 91.11.558.2119
    St. Charles, IL 60174 Fx: 905.812.0771 Fx: + 86.29.524.6259 Fx: + 852.27366580 Fx: + 91.11.567.6815
    Ph: 800-SENSOR2
    Fx: 630/377-6495 System Sensor in Europe System Sensor in Singapore System Sensor in Australia
    Documents On Demand: Ph: + 44.1403.276500 Ph: + 65.273.2230 Ph: + 613.54.281.142
    1-800-736-7672 x3 Fx: + 44.1403.276501 Fx: + 65.273.2610 Fx: + 613.54.281.172
    Web: www.systemsensor.com
    © 2000 System Sensor. The company reserves the right to change product specifications without notice. A05-0290-000•9/00(5K)•#660

    You might also like