Mam PDF

DEPARTMENT OF MECHANICAL ENGINEERING
DELHI TECHNOLOGICAL UNIVERSITY

(Formerly Delhi College of Engineering)
Course of Study
B. Tech. (MECHANICAL ENGINEERING WITH SPECIALIZATION
IN AUTOMOBILE ENGINEERING)
W.E.F. 2015-16 (2nd , 3rd, 4th year)
DRAFT AE-1
DEPARTMENT OF MECHANICAL ENGINEERING
BACHELOR OF TECHNOLOGY (MECHANICAL ENGINEERING WITH SPECIALIZATION IN AUTOMOBILE
ENGINEERING)
I Year: Odd Semester
Teaching Scheme Contact Exam Duration Relative Weights (%)
Hours/Week (h)
S. Subject Course Title Subject Credit L T P Theory Practical CWS PRS MTE ETE PRE
No. Code Area
Group A
1 MA101 Mathematics - I ASC 4 3 1 0 3 0 25 - 25 50 -
2 AP101 Physics – I ASC 4 3 0 2 3 0 15 15 30 40 -
3 AC101 Chemistry ASC 4 3 0 2 3 0 15 15 30 40 -
4 ME101 Basic AEC 4 4 0 0 3 0 25 - 25 50 -
Mechanical
Engineering
5 ME103 Workshop AEC 2 0 0 3 0 3 - 50 - - 50
Practice
6 HU101 Communication HMC 3 3 0 0 3 0 25 - 25 50 -
Skills
Total 21 16 1 7
Group B
1 MA101 Mathematics - I ASC 4 3 1 0 3 0 25 - 25 50 -
2 AP101 Physics – I ASC 4 3 0 2 3 0 15 15 30 40 -
3 EE101 Basic Electrical AEC 4 3 0 2 3 0 15 15 30 40 -
Engineering
4 CO101 Programming AEC 4 3 0 2 3 0 15 15 30 40 -
Fundamentals
5 ME105 Engineering AEC 2 0 0 3 0 3 - 50 - - 50
Graphics
6 EN101 Introduction to AEC 3 3 0 0 3 0 25 - 25 50 -
Environmental
Science
Total 21 15 1 9
DRAFT AE-2
I Year: Even Semester
Teaching Scheme Contact Exam Duration Relative Weights (%)
Hours/Week
S. Subject Course Title Subject Credit L T P Theory Practical CWS PRS MTE ETE PRE
No. Code Area
Group A
1 MA102 Mathematics - ASC 4 3 1 0 3 0 25 - 25 50 -
II
2 AP102 Physics – II ASC 4 3 0 2 3 0 15 15 30 40 -
3 EE102 Basic Electrical AEC 4 3 0 2 3 0 15 15 30 40 -
Engineering
4 CO102 Programming AEC 4 3 0 2 3 0 15 15 30 40 -
Fundamentals
5 ME102 Engineering AEC 2 0 0 3 0 3 - 50 - - 50
Graphics
6 EN102 Introduction to AEC 3 3 0 0 3 0 25 - 25 50 -
Environmental
Science
Total 21 15 1 9
Group B
1 MA102 Mathematics – ASC 4 3 1 0 3 0 25 - 25 50 -
II
2 AP102 Physics – II ASC 4 3 0 2 3 0 15 15 30 40 -
3 AC102 Chemistry ASC 4 3 0 2 3 0 15 15 30 40 -
4 ME104 Basic AEC 4 4 0 0 3 0 25 - 25 50 -
Mechanical
Engineering
5 ME106 Workshop AEC 2 0 0 3 0 3 - 50 - - 50
Practice
6 HU102 Communication HMC 3 3 0 0 3 0 25 - 25 50 -
Skills
Total 21 16 1 7
II Year: Odd Semester
S. Code Title Area Cr L T P TH PH CWS PRS MTE ETE PRE

No.
1. PE261 Quantitative Techniques AEC 4 3 1 0 3 0 25 - 25 50 -
2. AE201 Engineering Mechanics DCC 4 3 0 2 3 0 15 25 20 40 -
3. AE203 Thermodynamics DCC 4 3 0 2 3 0 15 25 20 40 -
4. AE205 Manufacturing DCC 4 3 0 2 3 0 15 25 20 40 -
Machines
5. AE207 Engineering Analysis DCC 4 3 0 2 3 0 15 15 30 40 -
and Design
6. MG201 Fundamentals of HMC 3 3 0 0 3 0 25 - 25 50 -
Management
Total 23
DRAFT AE-3
II Year: Even Semester
S. Code Title Area Cr L T P TH PH CWS PRS MTE ETE PRE

No.
1. EE272 Automotive Electrical AEC 4 3 0 2 3 0 15 25 20 40 -
and Electronics
2. AE202 Heat and Mass Transfer DCC 4 3 0 2 3 0 15 25 20 40 -
3. AE204 Theory of Machines DCC 4 3 0 2 3 0 15 25 20 40 -
4. AE206 Mechanics of Solids DCC 4 3 0 2 3 0 15 25 20 40 -
5. AE208 Material Engineering & DCC 4 3 0 2 3 0 15 25 20 40 -
Metallurgy
6. HU202 Engineering Economics HMC 3 3 0 0 3 0 25 - 25 50 -
Total 23
III Year: Odd Semester
S.No. Code Title Area Cr L T P TH PH CWS PRS MTE ETE PRE

1. AE301 Manufacturing DCC 4 3 0 2 3 0
15 25 20 40 -
Technology
2. AE303 Fluid 4 3 0 2 3
Mechanics And
DCC 0 15 25 20 40 -
Hydraulic
Machines
3. AExxx Departmental DEC/GEC 4 3 0/1 2/0 3 0 15/25 15/- 30 40/50 -
Elective /25
Course -1
4. AExxx Departmental DEC/GEC 4 3 0/1 2/0 3 0 15/25 15/- 30 40/50 -
Elective /25
Course -2
5. UExxx University UEC 3 3 0 0 3
Elective 0 25 - 25 50 -
Course
6. HU301 Technical HMC
2 3 0 0 3 0 25 - 25 50 -
Communication
7. Total 21
III Year: Even Semester
S.No. Code Title Area Cr L T P TH PH CWS PRS MTE ETE PRE

1. Design of 4 3 0 2 3 0
AE302 Machine DCC 15 25 20 40 -
Elements
2. Internal 4 3 0 2 3 0
AE304 Combustion DCC 15 25 20 40 -
Engines
3. Design of 4 3 0 2 3 0
AE306 Automobile DCC 15 25 20 40 -
Components
4. Departmental DEC/GEC 4 3 0/1 2/0 3 0 15/25 15/- 30 40/50 -
AExxx Elective /25
Course -3
5. Departmental DEC/GEC 4 3 0/1 2/0 3 0 15/25 15/- 30 40/50 -
AExxx Elective /25
Course -4
DRAFT AE-4
6. Professional
Ethics and
HU304 HMC 2 3 0 0 3 0 25 - 25 50 -
Human
Values
7. Total 22
IV Year: Odd Semester
S. Code Title Area Cr L T P T P CWS PR MT ETE PR

No. H H S E E
1. AE401 B.Tech. DCC
4
Project-I
2. AE403 Training DCC 2
Seminar
3. AE405 Alternative DCC 4 3 0 2 3
Fuels And
0 15 25 20 40 -
Energy
Systems
4. AE407 Production 4 3 0 2 3
And
DCC 0 15 25 20 40 -
Operations
Management
5. Computer DCC 3 0 2 3
Aided
AE409 Vehicle 4 0 15 25 20 40 -
Design And
Safety
6. AE4xx Departmenta DEC/GE 4 3 0/ 2/ 3 0 15/2 15/- 30 40/5
l Elective C 1 0 5 /25 0
Course -5
Total 22
IV Year Even Semester
S. Code Title Area Cr L T P T P CWS PR MT ETE PR

No. H H S E E
1. B.Tech
AE402 DCC 8
Project-II
2. AE4xx Departmenta DEC/GE 4 3 0/ 2/ 3 0 15/2 15/- 30 40/5
l Elective C 1 0 5 /25 0
Course -6
3. Departmenta DEC/GE 4 3 0/ 2/ 3 0 15/2 15/- 30 40/5
AE4xx l Elective C 1 0 5 /25 0
Course -7
4. Departmenta DEC/GE 4 3 0/ 2/ 3 0 15/2 15/- 30 40/5
AE4xx l Elective C 1 0 5 /25 0
Course -8
Total 20
List of Departmental Elective Courses

S.NO. Elective Title of Elective Elective
Code no.
1 AE-305 Automotive Aerodynamics & CFD DEC-1, 2
2 AE-307 Combustion Generated Pollution
3 AE-309 Operation Research
DRAFT AE-5
4 AE-311 Tyre Technology
5 AE-313 Thermal Engineering
6 AE-315 Turbo machinery and gas dynamics
7 AE-317 Power units and transmission
8 AE-319 Computer Simulation of I.C. Engine Process
9 AE-321 Advanced strength of material
10 AE-323 Finite Element Methods and Applications
11 AE-308 Measurement and Instrumentation
12 AE-310 Advanced Manufacturing Technology DEC-3,4
13 AE-312 Quality Management & Six Sigma Applications
14 AE-314 Metrology
15 AE-316 Advances in Welding & Casting
16 AE-318 Materials for automobile components
17 AE-320 Tribology and lubrication
18 AE-322 Reliability & Maintenance Engineering
19 AE-324 Elastic & Plastic Behaviour of Materials
20 AE-326 Production Planning & Inventory Control
21 AE-411 Vehicle Maintenance & Tribology DEC-5
22 AE-413 Vehicle Transport Management
23 AE-415 Power Plant Engineering
24 AE-417 Robotics & Automation
25 AE-419 Nuclear Energy
26 AE-404 Computer Integrated Manufacturing Systems
27 AE-406 Total Life Cycle Management DEC-6 ,
28 AE-408 Refrigeration & Automobile Air Conditioning DEC-7
29 AE-410 Fuel Cells and
30 AE-412 Modern Vehicle Technology DEC-8
26 AE-414 Automobiles Vibration System Analysis
27 AE-416 Renewable Sources of Energy
28 AE-418 Supply Chain Management
29 AE-420 Vehicle Safety Engineering
30 AE-422 Packaging Technology
31 AE-424 Mechatronics
32 AE-426 Financial Management
33 AE-428 Fracture mechanics
34 AE-430 Product design and development
35 AE-432 Tractors and Farm Equipment and Off Road Vehicles
36 AE-434 Automobile process control
List of University Elective Courses

S.No. SUBJECT CODE SUBJECTS
1. CO351 Enterprise & Java Programming
2. CO353 E-commerce & ERP
3. CO355 Cryptography & Information Security
4. CO357 Operating System
5. CO359 Intellectual Property Rights & Cyber Laws
6. CO361 Database Management System
7. EC351 Mechatronics
8. EC353 Computer Vision
9. EC355 Embedded System
10. EC 357 Digital Image Processing
11. EC359 VLSI Design
12. EE351 Power Electronic Systems
13. EE353 Electrical Machines and Power Systems
14. EE355 Instrumentation Systems
DRAFT AE-6
15. EE357 Utilization of Electrical Energy
16. EE359 Non-conventional Energy Systems
17. EE361 Embedded Systems
18. EN351 Environmental Pollution & E- Waste Management
19. EN353 Occupational Health & Safety Management
20. EN355 GIS & Remote Sensing
21. EP351 Physics of Engineering Materials
22. EP353 Nuclear Security
23. HU351 Econometrics
24. MA351 History Culture & Excitement of Mathematics
25. ME351 Power Plant Engineering
26. ME353 Renewable Sources of Energy
27. ME355 Combustion Generated Pollution
28. ME357 Thermal System
29. ME359 Refrigeration & Air Conditioning
30. ME361 Industrial Engineering
31. ME363 Product Design & Simulation
32. ME365 Computational fluid dynamics
33. ME367 Finite Element Methods
34. ME369 Total Life Cycle Management
35. ME371 Value Engineering
36. MG351 Fundamentals of Financial Accounting and Analysis
37. MG353 Fundamentals of Marketing
38. MG355 Human Resource Management
39. MG357 Knowledge and Technology Management
40. PE351 Advance Machining Process
41. PE 353 Supply Chain Management
42. PE355 Work Study Design
43. PE357 Product Design & Simulation
44. PE359 Total Life Cycle Management
45. PE361 Total Quality Management
46. PT361 High Performance Polymers
47. PT363 Separation Technology
48. PT365 Non-Conventional Energy
49. PT367 Polymer Waste Management
50. PT369 Nanotechnology in Polymers
51. PT371 Applications of Polymer Blends and Composite
52. IT 351 Artificial Intelligence and Machine Learning
53. IT 353 Data Structures and Algorithms
54. IT 355 Communication and Computing Technology
55. IT 357 Internet and Web Programming
56. IT 359 Java Programming
DRAFT AE-7
1. Subject Code: PE261 Course Title: Quantitative Techniques
2. Contact Hours: L: 3 T: 1 P: 0
3. Examination Duration (Hrs.): Theory: 3 Practical: 0
4. Relative Weight: CWS: 25 PRS: 0 MTE: 25 ETE: 50 PRE: 0
5. Credits: 4
6. Semester: III
7. Subject Area: AEC
8. Pre-requisite: NIL
9. Objective: : Apply the most widely used quantitative techniques in decision making. Realize the Importance of certain
mathematical techniques in getting the best possible solution to a problem involving limited resources.
10. Details of Course:
S. No. Contact
Contents Hours
1 Introduction to statistics-Nature and role of statistics in management, Measures of central 6
tendency, dispersion, Skewness and Kurtosis, Moments.
2 Introduction to probability theory- Probability theory, jointly distributed random variables, 4
distributions - continuous and discrete; Sampling distributions.
3 Hypothesis Testing- Parameter estimation and hypothesis testing; Parametric tests; Z test, t-test, 5
ANOVA; Non-parametric tests; Chi-square test, Correlation and regression analysis,
Applications of statistical packages.
4 Linear Programming-Introduction to Linear programming, duality, sensitivity analysis, 9
Introduction to non-linear programming.
5 Integer Programming- Introduction to Integer programming; pure integer case, mixed integer 10
case, cutting plane method and branch and bound method.
6 Decision Theory-Decision Tree, Game Theory-Minimax and Maximin, Dominance Principle 8
and use of OR software packages.
Total 42
11. Suggested Books:

S. No. Name of Authors /Books / Publishers
1 Operations Research by J K Sharma, MacMillan Publishers India Ltd., 5 th ed., 2013, ISBN-978-9350-59336-3
2 Quantitative Methods for Business by David R. elap. Anderson, Cengage Learning, 12 th ed., ISBN 10:
840062338, 2013
3 Business statistics by Naval Bajpai, Pearson Education India, 2009, ISBN: 978-81-317-2602-0, 1st ed.
1. Subject Code: AE201 Course Title: Engineering Mechanics

5. Credits: 4
6. Semester: III
7. Subject Area: DCC
9. Objective: To give students practice in applying their knowledge of mathematics, science, and
engineering in the vast area of “rigid body Mechanics” .
S. Contact
No. Contents Hours
1 Statics: Introduction, Important Vector quantities of Mechanics, Equivalent System of Forces. Moment of 6
a force: Varignon’s Theorem. Couple, Equivalent Couples, Equilibrium of Rigid Bodies, Free Body
Diagram, Conditions of Rigid Bodies. (Solution of the problems by Vector method also.)
2 Center of Gravity and Moment of Inertia: First and second moment of area and mass, radius of gyration, 8
DRAFT AE-8
parallel axis theorem, product of inertia, rotation of axes and principal M. I., Thin plates,M.I. by direct
method (integration), composite bodies. Virtual work and Energy method: Virtual Displacement,
principle of virtual work, mechanical efficiency, work of a force/couple (springs etc.), Potential Energy
and equilibrium, stability.
3 Truss: Types, Solution of Simple plane trusses by analytical and graphical methods. 4
4 Friction: Laws of dry friction, Friction Cone, Angle of Repose, Engineering Applications of friction e.g. 5
Wedge, Belt & Pulley and Screw Jack etc. Shear Forces and Bending Moments in Different Beams.
Dynamics
5 Kinematics of Particles: Rectilinear motion, plane curvilinear motion - rectangular coordinates, normal 9
and tangential component. Kinetics of Particles: Equation of motion, rectilinear motion and curvilinear
motion, work energy equation, conservation of energy, impulse and momentum conservation of
momentum, impact of bodies, co-efficient of restitution, loss of energy during impact. Euler
equations of motion and its application.
6 Kinematics of Rigid Bodies: Concept of rigid body, type of rigid body motion, absolute motion, 10
introduction to relative velocity, relative acceleration (Corioli's component excluded) and instantaneous
center of velocity, Velocity and acceleration polygons for four bar mechanism and single slider mechanism.
Kinetics of Rigid Bodies : Equation of motion, translatory motion and fixed axis rotation, application of
work energy principles to rigid bodies conservation of energy.
Total 42

TEXT BOOKS:
1 Mechanics for Engineers: Statics and Dynamics, Beer and Johnston, TataMcGraw hill Publishing Company
Limited.2013, ISBN-13: 978-0077295493
2 Engineering Mechanics: I. H. Shames, Statics and dynamics, 4th Ed, PHI, 2002.
ISBN-13: 978-0132791588
3
Engineering Mechanics; -Bhavikatti, S.S; - New Age International Publishers,2012, ISBN 13: 9780195696554
4. Engineering Mechanics, J. L. Meriam and L. G. Kraige Vol I – Statics, Vol II –Dynamics, 6th Ed, John Wiley,
2012. ISBN 10: 0471841145
1. Subject Code: AE203 Course Title: Thermodynamics

5. Credits: 4
6. Semester: III
9. Objective:To introduce the student about basic concepts of thermodynamic laws ad processes for analysis of thermal
systems and to enhance critical thinking and prepare him for facing thermal decision challenges.
S. Contact
No. Contents Hours
1 Review of Basic Concepts and First Law of thermodynamics: Concept of thermodynamic work and 8
heat, equality of temperature, Zeroth law of thermodynamics. First Law of Thermodynamics, Energy and
its Forms, Internal Energy and Enthalpy, P-V Plot for Different Processes, Steady Flow Energy Equation,
1st Law Applied to Non- Flow Process, Steady Flow Process and Transient Flow Process, Throttling
DRAFT AE-9
Process and Free Expansion Process.
2 Second Law of Thermodynamics and Availability: Limitations of First Law, Thermal Reservoirs, Heat 8
Engine, Kelvin- Planck and Clausius Statements and Their Equivalence, Carnot Cycle, Carnot Theorem
and Its Corollaries, Entropy, Clausius Inequality, Principle of Entropy Increase, Entropy Change in
Different Processes, Thermodynamic Relations. High and Low Grade Energy, Availability and
Unavailable Energy, Loss of Available Energy Due to Heat Transfer Through A Finite Temperature
Difference, Dead State of A System, Availability of A Non-Flow and Steady Flow System, Helmholtz and
Gibb’s Functions.
3 Properties of Pure Substance: Pure Substance and Its Properties, Phase and Phase Transformation, 6
Vaporization, Evaporation and Boiling, Saturated and Superheat Steam, T-V, P-V and P-T Plots,
Properties of Dry, Wet and Superheated Steam, Temperature – Entropy (T-S) and Enthalpy – Entropy (H-
S) Diagrams, Throttling and Measurement of Dryness Fraction of Steam.
4 Steam boilers &Vapor power cycle: Fire and water tube boiler, Boiler mountings and accessories. 6
Rankine cycle and its analysis; effects of operating variable on the Rankine cycle, reheating, ideal and
actual regenerative cycle and its limitations
5 Fuels and Combustion: Classification of Fuels- Solid, Liquid & Gaseous Fuels, Combustion Equations, 8
Stochiometric Air-Fuel Ratio, Excess Air, Exhaust Gas Analysis, Orsat Apparatus. Enthalpy and Internal
Energy of Combustion, Enthalpy of Formation, Adiabatic Flame Temperature, Calorific Values of Fuel.
First & second law analysis of combustion systems
6 Ideal and Real Gases: Basic Gas Laws, Vander Waal’s Equation of State, Reduced Co-Ordinates, 6
Compressibility Factor and Law of Corresponding States. Mixture of Gases, Mass, Mole and Volume
Fraction, Gibbs theorem, Dalton’s Law
Total 42

1
Thermodynamics An Engineering Approach 7th Edition by Cengel and Boles Tata McgrawHill(2011), ISBN:
978007338174
2
Engineering Thermodynamics – P K Nag, Tata Mcgraw Hill, ISBN: 9781259062568
3
Fundamentals of Thermodynamics – E. Rathakrishnan, PHI, New Delhi, ISBN: 9788120327900
4.
Engineering Thermodynamics – Jones and Dugan, PHI, New Delhi. ISBN: 9780023613326
5. Thermodynamics – C P Arora, Tata Mcgraw Hill ISBN: 9780074620144
6.
Thermal Science & Engineering- D.S.Kumar, SK Kataria&Sons, ISBN: 9789350134282
1. Subject Code: AE205 Course Title: Manufacturing Machines

5. Credits: 4
6. Semester: III
9. Objective:To introduce the student to different types of manufacturing machines and their mechanics of cutting, types of
tools and machining processes.
S. No. Contact
Contents Hours
1 Mechanics of orthogonal and oblique cutting-Mechanics of chip formation-Types of chips- 6
DRAFT AE-10
Cutting forces and power-Temperature in cutting-Tool life –Tool wear- Cutting Tool
Materials- -Cutting fluids.
2 Lathe: Types-Parts- Feed Mechanisms- Specifications of lathe- Lathe Operations- 8
Accessories & Attachments - Capstan and Turret lathe-Lathe Tools - Cutting Speed- feed
and machining time estimation.
3 Drilling: Operations – Types – Mechanisms - Nomenclature of twist drill – Tool and work 8
holding devices - Machining time estimation. Shaper and Planer: Types – Specifications –
Operations - Crank and slotted link mechanism - Stroke length adjustments - Automatic feed
mechanisms – Hydraulic shaper - Tool and work holding devices - Machining time
estimation – Shaper Tools - Difference in Shaper/Slotter/Planer
4 Milling: Types - Up Milling Vs Down Milling - Types of milling cutters - Operations - 8
Machining time, Estimation - Dividing head. Broaching: Types, - Operations - Broaching
Tools.
5 Grinding: Specification and selection of grinding wheels - Truing, Dressing - Classification 8
of Grinding wheels - Mounting of grinding wheels. Grinding machines Types: Cylindrical
grinder, surface grinders and special grinding machines.
6 Finishing Processes: Lapping - Honing - Super-finishing processes. Modern Machining: 6
High speed machining - Precision machining. Introduction to Unconventional machining
methods.
Total 42

TEXT BOOKS:
1 Geoffrey Boothroyd, Fundamentals of Metal Machining and Machine Tools, CRC press, ISBN-13:978-
1574446593
2 Rao,P.N., Manufacturing Technology–Metal Cutting and Machine Tools, Tata McGraw Hill, New Delhi,
ISBN-13: 9781259029561
3 Kalpakjian, S. and Steven R. Schmid, Manufacturing, Engineering & Technology, Prentice-Hall of India,
ISBN-13-148965-8
4.
Raghuwanshi, B.S., Workshop Technology, Vol.II, Dhanpat Rai & Co. New Delhi, ISBN-
13:1234567144378
5.
Lindberg R.A., “Process and Materials of Manufactures” Prentice-Hall of India, ISBN-13: 978-
0205118175
6.
Brown J.A. “Modern manufacturing processes”, Industrial Press Inc, ISBN-13:9780831130343
7. Krar S.F., “Technology of machine tools” Mc Graw-Hill, New York. ISBN-13,9780028030715
8.
Paul E.D., Black J.T. and Kosher R.A, “Materials and Processes in Manufacturing”, Wiley. ISBN-
13:978047165653
1. Subject Code: AE207 Course Title: Engineering Analysis and Design

5. Credits: 4
6. Semester: III
9. Objective:To Understand and discover processes and methods of creative problem solving. To Enhance and correlate their
creative and innovative thinking skills. To Understand various aspects of IPR and patenting. To Analyze and apply various
tools of creativity to some basic problems and Jugad innovations and To apply various ergonomics principles in newer
DRAFT AE-11
innovations.
S. No. Contact
Contents Hours
1 Specifications of Design, objectives and constraints. 10
Problem solving principles, Need for Creativity and Innovation, Creativity in Problem Solving,
lifestyle- comfort and luxuryExamples and case studies
Nature inspired innovationsDesign of various products inspired by nature like Green building, bullet
train, Nike Clothing, Velcro, Adhesive Tape, self-heating plastic, friction reducing swimming suit,
automated robot, screen display, deep blue case studies
2 Brain storming, Mind mapping, SWOC Analysis, Fishbone diagram,six thinking hats, Borrowing 6
brilliance, Da Vinci’s seven principles, Provocation and movement.
3 Drawing for Design, Machine component & assembly drawings full and half section views, bill of 4
materials.
4 MEDICI EFFECT Introduction, Intersection, Creating medici effect , Making intersectional 8
ideashappen, Case studies TRIZ INNOVATION Introduction, Ideality, Resources,
Contradictions, Pattern of innovation, Case studies JUGAAD INNOVATION:
Jugaad tactics: Seek Opportunities in Adversity, Do more with less, Think and act Flexibly, Keep it
simple, include the margin, Follow your heart. Case studies.
5 Ergonomics Concept; Man-machine-environment interaction system and user-friendly design 6
practice; Human compatibility, comfort and adaptability; Fundamentals of ergonomics,
environmental factors influencing human performance; Occupational stress; safety and health
issues;Design process involving ergonomics check and ergonomic design evaluation and
Participatory ergonomics aspects
6 IPR and Patent 8
Introduction to IPR; Overview & Importance; IPR in India and IPR abroad;Patents ;their definition;
granting; infringement ;searching & filing; Utility Models an introduction; Copyrights ; their
definition; granting; infringement ;searching & filing, distinction between related and copy rights;
Trademarks ,role in commerce ,importance , protection, registration; domain names; Industrial
Designs ; Design Patents; scope; protection; filing infringement; difference between Designs &
Patents' Geographical indications legal issues, enforcement ;Case studies in IPR.
Total 42

TEXT BOOKS:
1 Daniel h. “pink a whole new mind” Publisher-Pearson publishing New Delhi (ISBN-13: 978-
1594481710)
2 Benyus, J. M. (1997). “Biomimicry: Innovation Inspired by Nature” Pubisher-Harper Perenial New York
(ISBN 978-1-59017-133-2)
3 Altshuller, G., and Shulyak, L ,Technical Innovation Center, “Keys to Technical Innovation” Inc, USA.
(1997) '40 Principles: TRIZ. (ISBN: 978-0-387-75455-0)
4. Edward De Bono, “Lateral thinking be more creative and productive”,Publisher- penguin India (ISBN -
10: 0141033088)
5. Renault Nissan, Jugad innovation- (ISBN-13: 978-1118249741)
6. Edward De Bono, “six thinking hats” (ISBN-13: 978-0141033051)
7. Jonah Lehrer , “imagine, how creativity works”,Publisher- Canongate, London (ISBN: 9781847677860)
8 Steven Johnson, “Where Good Ideas Come From?”Publisher-Penguin Books (ISBN-10: 1594485380)
9 Navi Radjou JaideepPrabhu and Simone Ahuja, Jugad innovation (ISBN-13: 978-1118249741)
10 Malcolm GladwellBlink, “The Power of Thinking Without Thinking”Publisher- Little, Brown (ISBN-13:
DRAFT AE-12
978-0316010665), 2007
11 Howard Gardner, “Five Minds for the Future” (ISBN-13: 978-1422145357)
12 Daniel Goleman, “Emotional Intelligence” (ISBN 13: 9780553375060)
1. Subject Code: MG201 Course Title: Fundamentals of Management

5. Credits: 3
6. Semester: III
7. Subject Area: HMC
9. Objective: The basic objective of this paper is to acquaint the students with the basic concepts of management
necessary to deal with emerging business environment besides sensitizing them about societal challenges.
S.No. Detail Contents Contact Hrs.

1 Definition of management, importance of management, management principals, 8
managerial roles, managerial ethos, management vs administration, managerial
functions, task and responsibilities, organizational structure, motivation: meaning,
theories and techniques.
2 Concept of business environment, corporate social responsibility and corporate 8
governance, managerial values and ethics.
3 Objectives and importance of financial management, basics of capital budgeting, cost 9
of capital, emerging sources of funds for new projects, introduction to stock market.
4 Functions of marketing, marketing Vs sales, interface of marketing with other 8
departments, customer life time value, new product development, unethical issues in
marketing.
5 Introduction to knowledge management, knowledge society, knowledge economy, 9
building knowledge assets, sources of knowledge, technology innovation process, E-
governance: definition, objectives and significance; challenges in Indian context,
Digital India programme.
Total 42
Suggested Books
S. No. Name of Books / Authors/ Publishers

1 Fundamental of Management, Stephen P. Robbins, David A. De Cenzo and Mary Coulter, Pearson
Education, 2011( ISBN:9780273755869)
2 Financial Accounting, 4 ed, S.N. Maheshwari and S.K. Maheshwari, Vikas Pulication,2005 (ISBN:
8125918523)
3. Management, James A F Stonner, Pearson Education,2010 (ISBN: 9788131707043)
4. Marketing Management, 14th ed., Philip Kotler , Kevin Lane Keller, Abraham Koshy and
MithileswarJha, Pearson Education, 2013 (ISBN: 9788131767160)
5
Knowledge Management in Organizations: A Critical Introduction, Donald Hislop, Oxford
University Press,2013 ISBN: 9780199691937.
1. Subject Code: EE272 Course Title: Automotive Electrical & Electronics

5. Credits: 4
DRAFT AE-13
6. Semester: IV
7. Subject Area: AEC
9. Objective:Students should be able to understand the needs and working principles of electrical and electronics component
in the automobile like battery, charging system, stepper motors, microprocessor.
S. No. Contact
Contents Hours
1 Automotive Electrical System: Classification of Automotive Electrical Systems – Generation, 8
Storage, Distribution, Starting, Ignition, Lighting, Accessories – Electrical System – Earth &
Insulated Return System – Positive & Negative Earthing. Automotive Electrical System & Batteries:
Principles and Construction of Lead Acid Battery, Characteristics of Battery, Rating, Capacity and
Efficiency of Batteries, Non-Over Filling Devices, Various Tests on Batteries, Internal Resistance of
Battery, Maintenance and Charging, Charging Sulphated Batteries, Care of Batteries in Stock, Battery
Failures, Long Life Battery, Alkaline Battery, Its Advantages Over Lead Acid, Nickel –Iron Battery,
Nickel Cadmium Battery, Venner Silver – Zinc Battery, Fuel Cells, Trouble Shouting of Lead – Acid
Battery.
2 Starting System & Charging System: Condition At Starting, Behaviour of Starter During Starting, 8
Simple Motor, Torque Terms, Series Motor and Its Characteristics, Principle and Construction of
Starter Motor, Working of Different Start Drive Units, Care and Maintenances of Starter Motor,
Starter Switches, Trouble Shooting. Generation of Direct Current Simple, Generator, Type of D.C.
Generators, Shunt Generator Characteristics, Commutation, Commutator Construction, Armature
Reaction, Third Brush Regulation & Its Limitation, System of Connecting Fields, Cutout, Types of
Voltage and Current Regulators, Compensated Voltage Regulator, Alternators Principle and
Constructional Aspects and Bridge Rectifiers, New Developments, Trouble Shooting of Generator
Alternator.
3 Fundamentals of Automotive Electronic System: Current Trends in Automotive Electronic Engine 6
Management System, Electro Magnetic Interference Suppression, Electromagnetic Compatibility,
Electronic Dashboard Instruments, onboard Diagnostic System, Security and Warning System. Type
of Sensors, Sensor for Speed, Throttle Position, Exhaust Oxygen Level, Manifold Pressure,
Crankshaft Position, Coolant Temperature, Exhaust Temperature, Air Mass Flow for Engine
Application, Solenoids, Stepper Motors, Relay. Programmable Logic Controls, Relay Logic Control,
Motion Control. Ignition System: Composition of Ignition System, Types of Ignition Systems,
Magneto Ignition, Magnetos – Ignition Coil and Its Construction, Mutual & Self Induction,
Condenser, Distributor & Types – Spark Plug & Its Construction, Spark Plug Materials, Spark Plug
Life, Special Plugs, Heat Ranges, Plug Fouling, Cam Angle & Contact Point Gap – Rotor Arm –
Spark Plug Advance Mechanism – Centrifugal Advance – Inlet Manifold Vacuum Advance, Fully
Vacuum Advance, Limitation of Coil Ignition System, Special Ignition System & Devices, Gas-
Turbine Igniters, Ignition System Trouble Shooting.
4 Lighting System: Lights Sources, Energy Demand, HeadLights& Its Construction, Head Light Beam, 7
Headlight Dazzle, Anti-Dazzle Devices, Bulbs & Wattages, Headlight Adjustments, Fog Lamps, Side
& Tail Light, Brake Warning Lights, Led Lighting System, Horn, Wiper System, Trafficator,
Electrical Switches, Indicating & Wiring Devices, Electrical Pumps, Heater & Defrosters, Latest
Trends, Wiring & Installation, Auto Cables, Cable Colors, Cable Connectors, Wiring Harnesses,
Circuit Breakers, Fuses, Printed Circuits, Plastic Fibreoptics, Trouble Shooting Telemetric –
Bluetooth Technology for Communication, Consumer Electronics in Automobiles.
5. Architecture : General 8 Bit Micropocessor and Its Architecture 8085, Z-80 and Mc 6800 Mpu and 6
Its Pin Function Architecture - Function of Different Sections. Instruction Set : Instruction Format -
Addressing Modes - Instruction Set of 8085 Mpu-T-State - Machine Cycle and Instruction Cycles -
Timing Diagrams - Different Machine Cycles - Fetch and Execute Operations - Estimation of
Execution Times.
6. Assembly Language Planning : Construct of the Language Programming - Assembly Format of 8085 7
- Assembly Directive - Multiple Precision Addition and Subtraction – BCD to Binary and Binary to
BCD, Multiplication, Division, Code Conversion Using Look Up Tables - Stack and Subroutines.
Data Transfer Schemes : Interrupt Structure - Programmed I/O - Interrupt Driven I/O, Dma - Serial
I/O. Interfacing Devices : Types of Interfacing Devices - Input / Output Ports 8212, 8255, 8251, 8279.
DRAFT AE-14
Octal Latches and Tristate Buffers - A/D and/A Converters - Switches, Led's Rom and Ram
Interfacing. Applications : Data Acquisitions - Temperature Control - Stepper Motor Control -
Automotive Applications Engine Control, Suspension System Control, Driver Information Systems),
Development of A High Speed, High Precision Learning Control System for the Engine Control.
Total 42

1
Ramesh, Goankar.S., " Microprocessor Architecture Programming and Applications " (ISBN-13-978-81-87972-
88-4)
2 Young A.P. & Griffiths. L, “ Automotive Electrical Equipment” ., Elbs& New Press – 1999. (ISBN-
9780080969459)
3 William B. Riddens, “Understanding Automotive Electronics”, 5th Edition – Butter Worth Heinemann Woburn,
1998 (ISBN-10-0750675993)
4. Kohli P.L., “Automotive Electrical Equipment” Tata Mcgraw – Hill Co., Ltd., New Delhi, (ISBN-10-
0070964679_
5. Bechhold “Understanding Automotive Electronics” , SAE-, 1998. (ISBN-1-86058-073-1998)
6. Crouse, “W.H Automobile Electrical Equipment”., Mcgraw – Hill Book Co., Inc., New York, 3rd Edition.
(ISBN-13-9780070146655)
7. Judge A.W, Chapman & Hall, “Modern Electrical Equipment of Automobiles” London, 1992. (ISBN-
9789401168816)
8. Robert Bosch, “Automotive Hand Book” , SAE- (5th Edition), 2000. (ISBN-9780837612430)
9. Aditya.P.Mathur, " Introduction to Microprocessors ", III Edition, Tata Mcgraw-Hill Publishing Co Ltd., New
Delhi, 1989. (ISBN-10-0074602225)
10. Ahson.S.I. " Microprocessors With Applications in Process Control ", Tata Mcgraw-Hill, New Delhi, 1986.
(ISBN-9780074515105)
11. JabezDhinagar.S., " Microprocessor Application in Auto moblies ". (ISBN-9780080977683)
1. Subject Code: AE202 Course Title: Heat and Mass Transfer

5. Credits: 4
6. Semester: IV
9. Objective:To familiarize the student basic concepts of modes of Heat transfer for analysis of thermal systems and to enhance
critical thinking and prepare him for facing heat transfer design challenges.
S. Contact
No. Contents Hours
1 Introduction and Conduction: Various modes of heat transfer, Fourier's, Newton's and Stefan Boltzman's 10
Law, combined modes of heat transfer, thermal diffusivity, and overall heat transfer coefficient, thermal
conductivity of solids, liquids and gases, factors influencing conductivity, measurement.General
differential equation of conduction, one dimensional steady state conduction, linear heat flow through a
plane and composite wall, tube and sphere, critical thickness of insulation, effect of variable thermal
conductivity, conduction with heat sources, heat transfer from extended surfaces, fin performances,
concept of corrected fin length/ error in temperature measurement by thermometer well.Transient heat
conduction- lumped system analysis, transient temperature charts (Heisler and Grober charts), transient
heat conduction in multidimensional systems.
2 Convection (Forced): Introduction, laminar boundary layer equations for internal and external flows; 10
laminar forced convention on a flat plate and in a tube, Reynolds-Colburn analogy/Dimensional analysis
and physical significance of the dimensionless parameters.
Convection (Natural): Dimensional analysis of natural convection; empirical relationship for natural
DRAFT AE-15
convection, convection with phase change, description of condensing flow, theoretical model of
condensing flow, introduction to heat pipe, regimes of boiling heat transfer, empirical relationships for
convection with phase change.
3 Thermal Radiation: Introduction, absorption and reflection of radiant energy, emission, radiosity and 8
irradiation, black and non black bodies, kirchchoff's law; intensity of radiation, radiation exchange
between black surface, geometric configuration factor, grey body radiation exchange between surfaces of
unit configuration factors, radiation shields, electrical analogy to simple problems, non-luminous gas
radiation, errors in temperature measurement due to radiation.
4 Heat Exchangers: Different types of heat exchangers; design of heat exchangers, LMTD and NTU 8
methods, fouling factor and correction factor, Introduction to compact and plate heat exchangers.
5 Mass Transfer: Mass and mole concentrations, molecular diffusion, Fick's law; eddy diffusion, molecular 6
diffusion from an evaporating fluid surfaces, introduction to mass transfer in laminar and turbulent
convection, dimensional less parameters in convective mass transfer, combined heat and mass transfer
Total 42
1
Fundamentals of Engineering Heat and Mass Transfer by R.C.Sachdeva, New Age International Publishers, 2010,
USBN: 978-81-224-2785-1
2 Fundamentals of Heat and Mass Transfer by P Frank. Incropera and David P. DeWitt, John Wiley and Sons
3 Heat Transfer by A. Bejan, John Wiley and Sons, 1993, ISBN: 9780471502906
4. Heat and Mass Transfer by D.S.Kumar, Katarya& sons Ltd., 2013, ISBN9789350142697
5. Heat Transfer A Practical Approach by A.CenegelYunus, Tata McGraw Hill, ISBN: 9780072458930
6. Heat and Mass Transferby J.P Holman, Tata McGraw Hill, ISBN: 0702296189
7. Principles of Heat Transfer by Kreith and Bohn, Asian Books Private Ltd, 2010, ISBN: 9780495667704
8. Fundamentals of Momentum, Heat and Mass Transfer by James R.Welty; John Wiley & Sons (Pvt). Ltd., 2007,
ISBN: 9780470128688
1. Subject Code: AE204 Course Title: Theory of Machines

5. Credits: 4
6. Semester: IV
9. Objective:To familiarize the student with fundamentals of mechanisms, velocity and acceleration analysis, gears, types of
balancing and mechanical vibration.
S. No. Contact
Contents Hours
1 Kinematic fundamentals, Mechanisms and machines, kinematics and kinetics. Degrees of freedom, 8
types of motion, elements of kinematic chain, determination of degrees of freedom, paradoxes,
isomers, linkage transformation, intermittent motion mechanism, inversion, grashof's criterion,
straight line generating mechanisms.
2 Acceleration analysis: Graphical and vector solution: Position of any point on linkage, transmission 8
angles, velocity by velocity polygon and instantaneous center method, acceleration, coriolis
acceleration. Analytical solution for four-bar, slider-crank mechanism. Freudenstein's equation,
velocity of slip. Computer aided analysis of position, velocity and acceleration.
3 Kinematic synthesis of mechanisms: Functioning and path generation, Chebyshev spacing of 6
precision points, three position synthesis. Cam profile analysis: Motion of the follower, cam profile
constructions, analysis of cams with specified contours.
4 Kinematic analysis of gears: Nomenclature and classification, law of gearing, path of contact, arc of 6
contact, interference for spur gears. Gear trains: simple, compound, reverted, epicyclic gear trains,
compound epicyclic, epicyclic with bevel gears, sun and planet gears.
5 Dynamic analysis and balancing: Slider-crank mechanism, turning moment computations and 8
DRAFT AE-16
flywheel. Gyroscopes: Gyroscopic law, effect of gyroscopic couple on automobiles, ships and
aircrafts. Balancing: Static and dynamic balancing, balancing of revolving and reciprocating masses,
single and multi-cylinder engines, V-engines.
6. Vibrations: Vibration analysis of SDOF systems, natural, damped, forced vibrations, transmissiblity 6
ratio, vibration isolation and vibration of mass supported on foundations subject to vibrations,
whirling of shafts.
Total 42

1 Thomas Bevan, “Theory of Machines”, Pearson education ISBN:8131729656, 1944
2 J.E.Shigley and J.J.Uicke, “Theory of Machines and Mechanisms”, oxford university press india ISBN:
0195371232,2010
3 SS Rattan,” Theory of machines”, tata macgraw hill education ISBN: 007014477X,2009
4. PR Balany, “ Theory of machines”,tata macgraw hill publication limited ISBN: 817409122X, 2001
1. Subject Code: AE206 Course Title: Mechanics of Solids

5. Credits: 4
6. Semester: IV
9. Objective:To introduce the student with types of stresses at a point/plane, bending and torsion analysis, types of cylinders,
columns and types of springs.
S. No. Contact
Contents Hours
1 Stress and strain tensors: State of stress at a point, Principal stresses, Three stress invariants, Mohr’s 8
circle, Strain tensors, Constitutive laws, Theories of failure.
2 Strain Energy Methods: Strain energy in torsion and bending, Maxwell’s reciprocal theorem, 8
Castiglione’s theorem, slope and deflection.
3 Bending &Torsion: bending of straight bars, T and I-sections. Torsion of thin-walled circular tubes. 6
4 Thin and thick cylinders under internal fluid pressure, wire winding of thin cylinders, stresses in 6
shrink-fit and shaft. Rotating discs of uniform thickness.
5 Columns: Elastic instability, theory of long columns, end conditions, Rankine Gordon formula and 8
other empirical relations.
6. Springs: Helical, Spiral and leaf springs. 6
Total 42

S. Name of Authors /Books / Publishers
No.
1 “Strength of Materials”, Ryder G.H., Macmillan, Delhi, 2003.ISBN 0333935365
2 “Elements of Strength of Materials”, Timoshenko S.P., East-West Affiliated, New Delhi,OCLC Number:
808806720
3 Mechanics of materials by Beer and Johnston,DeWolfMazurek , 6th edition, 2013, ISBN-13: 978-1-25-909717-1
4. Mechanics of materials by William F. Riley, Leroy D. Sturges and Don H. Morris; publisher: John Wiley and
sons. ISBN : 978-0-471-70511-6,2007
DRAFT AE-17
5. “Engg. Mechanics of Solids”, Eger P. Popov, Prentice Hall, New Delhi, 2000, ISBN 81-203-0836-0
6. Mechanics of Materials by James M.Gere. Thomson press, 5th Edition, 2004 , ISBN 981-254-863-7
1. Subject Code: AE208 Course Title: Material Engineering & Metallurgy

5. Credits: 4
6. Semester: IV
9. Objective:This course provides the knowledge on the structure, composition, and behaviour of material under various
mechanical process. It also provides the knowledge on various metallurgical process. The study of this course will help the
student to identify and select suitable material for various engineering application.
S. No. Contact
Contents Hours
1 Nature and properties of materials: Engineering materials: metal, ceramic, polymer, 8
composites, Crystal structures, space lattices, miller indices, Defects: point defect, line
defect, surface defect and bulk defect and theory of dislocation.
2 Structure determination using x-ray diffraction (Bragg’s diffraction and structure factor for 8
cubic lattices), Slip, twinning, effect of cold and hot working on mechanical properties,
principles of recovery, re-crystallization and grain growth
3 Phase evolution: Definition of a phase, phase rule, solidification of metal and alloys, 6
eutectic, eutectoid, peritectic, peritectoid reactions with examples, iron-carbon equilibrium
diagram, TTT curve, heat treatment of plain carbon steels, annealing, normalizing,
hardening, tempering, case-hardening-carburizing, cyaniding, nitriding, Induction
Hardening, flame hardening, precipitation hardening of aluminum alloys.
4 Mechanical behavior: Concept of yield point and elastic modulus, fracture in ductile and 6
brittle materials, Griffith’s theory, Fracture toughness, ductile to brittle transition, fatigue
and Design considerations. Creep, Mechanism of creep, creep curve, creep resistant
materials, and effect of material variables on creep properties
5 Materials: plain carbon steels, effect of alloying elements, properties, uses and heat 8
treatment of tools, stainless, spring and wear-resisting steels; production, composition,
properties and use of non-ferrous alloys, e.g., brasses, bronzes, duralumin, die-casting and
bearing alloys IS standards codes for steels.
6. Powder metallurgy: principles, techniques, application and advantages, surface treatment. 6

Fiber Reinforced Composites: General characteristics, Applications, Introduction to Fibers
– glass, carbon, Kevlar 49 fibers. Matrix – Polymeric, Metallic, Ceramic Matrix, Coupling
agents and fillers.
Total 42
1 William D. Callister. Material science and engineering : An introduction, John Wiley & sons ISBN:
13:978-0470556733
2 Raghvan V., Material science and engineering: A first course, sixth edition, PHI learning, ISBN: 978-81-
203-5092-2
3 Kenneth G. Budinski, Engineering Materials: Properties and selection, ninth edition, ISBN: 13:978-
0137128426
4. George E Dieter, Mechanical Metallurgy, Mc Graw hill Education,1989, ISBN: 13:9780071004060
DRAFT AE-18
1. Subject Code: HU202 Course Title: Engineering Economics
5. Credits: 3
6. Semester: IV
9. Objective: To enable the students to understand the economic theories which may be applied to maximize return and
economic environment in which they have to operate.
S.No. Contents Contact Hours
1. 10
Introduction: Nature and significance of economics, Goods and Utility, Basic Concept
of Demand and Supply, Elasticity of Demand- Price elasticity of Demand, Cross
elasticity of Demand, Production - Production Function, Production Process and
Factors of Production, Market – Introduction to Monopoly, Perfect Competition,
Oligopoly and Monopolistic Competition, Cost Concepts- Opportunity Cost, Total
Cost, Average Cost; Marginal Cost; Life Cycle cost, Sunk Cost; Preparation of Cost
Sheet Profit Maximisation- numerical problem.
2. 10
Money- its evaluation and function, Bank- Commercial Bank and Central Bank
and brief idea about function of banking system:. Tax and Subsidy, Type of Tax-
Direct and Indirect, Monetary and fiscal policy, Inflation and Business cycle,
International trade, terms of Trade, Gain from International Trade, Free Trade vs.
Protection, Dumping, Balance of Payment.
3. 12
Role of Science, Engineering and Technology in Economic Development: Seven
salient Feature of the Indian Economy; Inclusive Growth; relevance for the Indian
Economy; Globalisation & opening up of the Indian Economy; GDP- definition and Its
measurement; How knowledge of engineering and technology may be used to improve
life at slum; Green Revolution and White revolution. Reasons for their success and can
we replicate them. Appropriate Technology & Sustainable Development.
Entrepreneurship: Macro environment for promotion of entrepreneurship: How
environment has changed after advent of IT and Globalisation.
4. 10
Elementary Economic Analysis: Interest formulas and their Applications;
Calculations of economic equivalence, Bases for Comparison of Alternatives: Present
Worth Method, Future worth method, Annual equivalent, Internal Rate of Return;
Business Risk; Factors which should be taken care while deciding price of the product
in the market.
TOTAL 42

S.No. Name of Books / Authors/ Publishers
1. G.J. Thuesen, & W.J. Fabrycky, Engineering Economy, Pearson Education, 2007, ISBN
013028128X
2. William G. Sullivan, Elin M. Wicks, C. Patrick Koelling, Engineering Economy, Prentice Hall,(
First Indian reprint). 2009, ISBN 0131486497
3. Donald G. Newman, Jerome P. Lavelle & Ted G. Eschenbach, Engineering Economic
Analysis, Oxford University Press, USA , 2004, ISBN 0195168070
4. Seema Singh, Economics for Engineering Students, IK International Publishing House Pvt. Ltd,
2014, ISBN 8190777041
DRAFT AE-19
1. Subject Code: AE301 Course Title: Manufacturing Technology
5. Credits: 4
6. Semester: V
9. Objective:To introduce student with various types of conventional machines, unconventional machines, theory of metal
cutting, design of tools and methods of measurement.
S. No. Contact
Contents Hours
1 Conventional Machining : General Principles ( With Schematic Diagrams only ) of Working, 10
Types and Commonly Performed Operations in the Following Machines - Lathe, Shaper, Planer,
Milling Machine, Drilling Machine, Grinding Machine, Gear Cutting - Basic of CNC Machine.
2 Unconventional Machining Processes : Need for Unconventional Machining Processes - Non 8
conventional machining: Studies on basic principle, working and effects of process parameters of
the following processes: Ultrasonic machining (USM), Abrasive jet machining (AJM), Electro-
discharge machining (EDM), Electro-chemical machining (ECM), Electron beam machining
(EBM), Plasma arc machining (PAM) and Laser beam machining (LBM). Ion Beam Machining
(IBM), Biochemical Machining
3 Theory of Metal Cutting: Mechanics of metal cutting- Orthogonal and oblique cutting, Chip 8
formation, Types of chips, Chip control, Merchants theory of cutting forces at tool point,
Limitations and modifications of Merchants theory, Plowing forces and the ‘Size effect’, Heat
generation in metal cutting, Cutting fluids and their physical action, Tool wear, Tool life and
Machinability, Nomenclature of cutting tools and Cutting tool materials, Economics of
machining, Analysis of milling and grinding processes.
4 Design Features of Machine Tools: Design requirements of machine tools, Kinematic drives of 8
machine tools, Types of machine tool drives, Design of machine tool spindle. UNIT- V Jigs &
Fixtures: Important considerations in jigs and fixture design. Main principles of designing of jigs
& fixtures. Different devices and methods of locations. Different types of clamps used in jigs &
fixtures.
5. Metrology: Introduction to Metrology and its relevance, Linear and angular measurements. 8
Total 42

TEXT BOOKS:
1
HajraChoudury, “Elements of Workshop Technology", Vol. I andVol. II, Asia Publishing House, 1996.
(ISBN-13-9788185099149)
2 B S Raghuwanshi, “Production Technology” Vol. 1,2 (ISBN-4567144376)
3 P N Rao “Manufacturing Technology”,Vol.1, Tata Mcgraw Hill, 2003. (ISBN-9781259062575)
4. Sharma P.C., “A Text Book of Production Engineering”, Vol.1, S. Chand Publication,New Delhi, 2001.
(ISBN- 9788121901116)
5. Geoffrey Boothroyd, “Fundamentals of Machining & Machine Tools” Winston A. Knight, Marcel & Dekker
Publications. (ISBN-10:1574446592)
DRAFT AE-20
6. B.L.Juneja, G.S.Sekhon& Nitin Seth, “Fundamentals of Metal Cutting & Machine Tools”, New Age
International Publications (ISBN-8122414672)
7. P.N.Rao, “Manufacturing Technology” Tata McGraw Hill Publications (ISBN-10:1259062570)
8. Pandey & C.K. Singh, “Production Engineering Sciences” P.C. Standard Publications. (ISBN-
9788186308950)
1. Subject Code: AE303 Course Title: Fluid Mechanics and Hydraulic Machines
5. Credits: 4
6. Semester: V
9. Objective: To provide an understanding of the fundamentals of fluid mechanics, and appreciation of the design principles
in fluid systems, the ability to analyses existing fluid systems and capable to think new hydraulic system.
S. No. Contact
Contents Hours
1 Basic Concept & Properties: Fluid – Definition, Distinction Between Solid and Fluid – Units and 8
Dimensions – Properties of Fluids – Density, Specific Weight, Specific Volume, Specific Gravity,
Temperature, Viscosity, Compressibility, Vapour Pressure, Capillary and Surface Tension – Fluid
Statics: Concept of Fluid Static Pressure, Absolute and Gauge Pressure Measurements by Manometers
and Pressure Gauges.
2 Fluid Kinematics and Fluid Dynamics: Fluid Kinematics - Flow Visualization – Lines of Flow – 8
Types of Flow –Velocity Field and Acceleration – Continuity Equation (one and Three Dimensional
Differential Forms)- Equation of Streamline – Stream Function – Velocity Potential Function –
Circulation – Flow Net.
3 Fluid Dynamics: Equations of Motion- Euler’s Equation Along A Streamline – Bernoulli’s Equation 6
– Applications – Venturimeter, Orifice Meter, Other Flow Measurement Instruments, Pilot Tube.
Dimensional Analysis Dimensional Numbers, Their Application. – Buckingham’s π Theorem –
Applications – Similarity Laws and Models.
4 Incompressible Fluid Flow: Viscous Flow –Navier – Stoke’s Equation (Statement only) – Shear 6
Stress, Pressure Gradient Relationship Laminar Flow Between Parallel Plates – Laminar Flow Through
Circular Tubes (Hagen Poiseulle’s) – Hydraulic and Energy Gradient – Flow Through Pipes – Darcy –
Weisback’s Equation – Pipe Roughness –Friction Factor – Mody’s Diagram – Minor Losses - Flow
Through Pipes in Series and in Parallel – Power Transmission – Boundary Layer Flows, Boundary
Layer Thickness, Boundary Layer Separation – Drag and Lift Coefficients.
5. Hydraulic Turbines: Impact of Jet on Flat, Curved & Moving Plates –Fluid Machines: Definition and 8
Classification – Exchange of Energy – Euler’s Equation for Turbo Machines – Construction of Velocity
Vector Diagram’s – Head and Specific Work – Component of Energy Transfer – Degree of Reaction.
6 Hydraulic Pumps Compressor & Fans: Pumps: Definition and Classifications – Centrifugal Pump: 6
Classifications, Working Principles, Velocity Triangles, Specific Speed, Efficiency and Performance
Curves – Reciprocating Pump: Classification, Working Principles, Indicator Diagram, Work Saved by
Air Vessels and Performance Curves – Cavitations in Pumps Rotary Pumps: Working Principles of
Gear and Vane Pumps. Definition – Classification Difference, Efficiency, and Performance Curves.
Total 42

DRAFT AE-21
TEXT BOOKS:
1 Hydraulic Machines- by K Subramanya , 2014, Mc Graw hill, ISBN-10: 1-25-900684-0
2 Fundamental of Fluid Mechanics by Munson, young, Okiishi, huebsch, 6th Edition, Wiley, 2013, ISBN 978-81-
265-2392-4
3 Fluid Power with Applications by Anthony Esposito , 6th Edition, Pearson, ISBN 978-81-775-8580-3
4. Hydraulic Machines including Fluidics by Dr. Jagdishlal, 6th Edition reprint 2010,metropolitan ,ISBN 81-200-
0026-9
5. Fluid Mechanics Cengel, Younus Tata Mc Graw Hill, III Edition , ISBN-10 : 0-07- 070034-6, 2015
1. Subject Code:HU301 Course Title: Technical Communication

5. Credits: 2
6. Semester: V
9. Objective: To train students for business communication to enhance employability skills with special emphasis on
placement interviews and public speaking.
Sl. No. Contents Contact

Hours
1. English for Professional Purposes:

A. Technical Communication- Methods, Strategies and Skills 1
B. Communication in Global Contexts- Social, Cultural, Political and Technical, 2
especially in formal set up
2. Communication at the Workplace: Oral and Written:
A. Written Communication- Letters, Orders (Sale/Purchase) Report Writing, 6
Technical proposals Resume, SOP, Memo, Notice, Agenda, Minutes, Note
Taking/Making,
B. Oral Communication: Seminars, Conferences, Meetings, Office Etiquettes/ 6
Netiquettes, Presenting Written Material Negotiation, Demonstration, Group
Discussion, Interview
Group Discussion and Report Writing:
3. A. Group Discussion ( Continous assessment through the semester)
B. Minor Report Writing( to be submitted before Mid- Semester Examination) 13
C. Major Report writing ( To be submitted
before End Semester Examination)
Total 28
11.Suggested Books:
Sl.No. Name of Books, Authors, Publishers

1 Technical Communication: Principles and Practice Raman, Meenakshi and Sangeeta Sharma, Oxford
University Press, 2014, ISBN-13: 978-0-19-806529-6
DRAFT AE-22
2 Writing to Get Results, (3rd Ed) Blicq, Ron S., Lisa A. Moretto, John Wiley and Sons, Inc.,2001, ISBN 0-
7803-6020-6
Effective Technical Communication: A Guide for Scientists and Engineers , Mitra, Barun K. OUP: Delhi,
3
2006, ISBN-13: 978-0-19-568291-5
Personality Development and Soft Skills, Mitra, Barun K. New Delhi: Oxford University Press.,2014, ISBN-
4
9780198060017
The Essence of Effective Communication, Ludlow, Ron and Fergus Panton. Prentice Hall: PHI.,1996, ISBN-
5
81-203-0909-X
6 Advanced Technical Communication, Gupta, Ruby. Foundation Books,2011, CUP. ISBN 978-81-7596-733-5
Soft Skills: Enhancing Employability, Rao, M.S. Connecting Campus with Corporate, 2011, ISBN: 978-93-
8
80578-38-5
Developing Communication Skills (2nd Ed), Mohan, Krishna and Meera Banerji, Macmillan Publishers
9
India Ltd.,2009 ISBN 13: 978=0230-63843-3
1. Subject Code: AE302 Course Title: Design of Machine Elements

5. Credits: 4
6. Semester: VI
9. Objective: Student should be aware about the principle of design, aesthetics consideration in design. He should be able to
understand the principle of welding, coupling drives and brakes
S. No. Contact
Contents Hours
1 Introduction: : Principles of mechanical design, systematic design process, aesthetic and ergonomic 8
considerations in design, use of standards in design. Manufacturing consideration in design, casting,
machining, forging. Dynamic and fluctuating stresses, fatigue failure and endurance limit, stress
concentration, causes and remedies in design, Factor of safety, Tolerances and types of fits. Selection
of materials.
2 Design of Elements: : Cotter and knuckle joints; screwed fastenings, bolted and riveted joints 8
under direct and eccentric loads.
3 Welded Joints : Welded joints, strength of welded joints, eccentrically loaded joints, welded joints 8
subjected to bending moment and torsion.
4 Shafts and Couplings : Shafts, keys and couplings –design of rigid and pin bushed flexible couplings 8
Translation screws : Force analysis and design of various types of power screws. Springs, uses and
design of close coiled helical springs.
5 Mechanical Drives: : Selection of transmission, helical, bevel and worm gears, belt and chain 6
drives.
6 Friction Clutches & Brakes: Common friction materials, shoe, band, cone and disc brakes 4
their characteristics and design, friction clutches.
Total 42

DRAFT AE-23
1 Maleeve Hartman and O.P.Grover,"Machine Design",Publisher- CBS Publication & Publishers(ISBN-
8123906374)
2 V.B. Bhandari,"Machine Design", Publisher - Tata McGraw Hill(ISBN-9780070681798)
3 P.C. Sharma and D.K Aggarwal.,"Machine Design", Publisher-S.K. Kataria & Sons(ISBN-9350142813)
4 Mahadevan,"Design Data Book",Publisher-CBS Publishers & Distributors(ISBN-8123901623)
5 I.E. shigley & C.R. Mischke,"Mechanical Engineering Design",Publisher-Tata McGraw Hill Co.Inc.(ISBN-
9780072832099)
1. Subject Code: AE304 Course Title:Internal Combustion Engines

5. Credits: 4
6. Semester: VI
9. Objective:To understand the basic principle and IC Engine. To know about different components in IC Engine. To know
the basics of power generation in IC Engine. To analyse the combustion process in SI and CI engine. To understand and
evaluate the auxiliary system in IC engine; such as supercharger/turbocharger. To apprise the theory of combustion and cause
of emission and their control.
S. No. Contact
Contents Hours
1 Introduction to I.C Engines: 8
Principle of working, Classification; Air std. Fuel air and actual cycles, two and four stroke, SI and
CI engines main parts, valve and port timing diagram
2 Combustion Phenomenon in SI engines: 8
Principles of combustion in SI engine,effect of engines and operating variables on ignition delay &
flame propagation, combustion chamber for SI engines, cycle to cycle variation, pre-ignition,
abnormal combustion, theories of detonation, effect of engine and operating variables on detonation,
surface ignition, adiabatic flame temperature, ignition systems
3 Combustion phenomenon in CI engines: 8
Principles of combustion in CI engine, delay period, variables affecting delay period, diesel knock,
methods of controlling diesel knock, combustion process & combustion chambers for CI engines
4 Fuel system and Mixture requirement in SI and CI Engine: 8
Carburetion- working principles, chemically correct air-fuel ratio and load variation, compensating
devices, venture and jet dimension calculation, modern fuel induction system, multi point fuel
injection system, fuel injection: common rail direct injection
5 Engine Testing, Supercharging, Lubrication and Engine Cooling: 6
Engine performance and testing , measurement of power,supercharging limits of SI &CI engines
methods of supercharging, superchargers, turbo charging, lubrication principles, function of
lubricating system, properties of lubricating oil, additives, cooling system, air cooling, water cooling
6 Introduction to Automotive Fuels: 4
Petroleum based fuels and their properties, necessity of alternative fuels, LPG, CNG, producer gas,
biogas, H2, biodiesel and alcohols, knock rating of engine fuels,
Total 42
DRAFT AE-24
1
Funguson, I.C Engines ISBN-13: 978-0471356172
2 Fundamentals of I.C Engines by HN Gupta. ISBN-13: 978-81-203-4680-2
3 Mathew & Sharma, I.C Engines by, Khanna Pub.ISBN, 9383182428.
4 Ganeson, IC Engines TMH, ISBN: 9781259006197
1. Subject Code: AE306 Course Title:Design of Automobile components

5. Credits: 4
6. Semester: VII
9. Objective:To familiarize the students with the process of design and analysis of engineering systems and to enhance critical
thinking and prepare him for facing design challenges. To familiarize him with statistical, decision making and optimization
tools.
S. No. Contact
Contents Hours
1 Design of friction clutches: common friction materials, single plate, multi plate and 6
centrifugal clutches and their characteristics and design of friction clutches
2 Mechanical gears: Design of Helical, Bevel and Worm Gears, Belt and Chain drives and 8
Automotive Gear box assembly. UNIT III Brakes: Common friction materials, shoe, band,
cone and disc brakes their characteristics and design of brake assembly
3 Design of Bearings: Rolling contact bearing: types of rolling contact bearings, static and 8
dynamic load capacities, Stribeck’s equation, equivalent bearing load, load life relationship,
bearing life, load factor, selection of bearings from manufacturers catalogue. Lubrication and
mountings, dismounting and preloading of bearings, oil seals and packing
4 Sliding contact bearings: bearing material and their properties, bearing types, and their 8
constructional details, hydrodynamic lubrication- basic theory, design consideration in
hydrodynamic bearings, Raimondi and Boyd method relating bearing variables
5 Design of Engine Parts: Piston, Engine Valves, Cylinder, Connecting Rod, Crank Shaft for 6
CI and SI engines.
6 Introduction to the design of automobile chassis:Aerodynamic formulations, Calculation of 6
various aerodynamic resistance
Total 42
TEXT BOOKS:
DRAFT AE-25
1 Maleeve Hartman and O.P. Grover, “Machine Design”, CBS Publication & Publishers, ISBN-13: 978-
8123906379
2 V.B Bhandari, “Machine Design”, Tata Mcgraw Hill, ISBN 0070681791, 9780070681798
3 P.C. Sharma and D.K Aggarwal., “Machine Design”, S.K. Kataria& Sons, ISBN 8185749094,
9788185749099
REFERENCE BOOKS:
1 Mahadevan, “Design Data Book”, CBS Publication & Publishers, ISBN-13: 978-8123923154
2 Daniel E Whitney, Mechanical Assemblies, Oxford Univ. Press, ISBN : 0195157826,2004
1. Subject Code: HU302Course Title: Professional Ethics and Human Values

4. Relative Weight: CWS: 25 PRS:0 MTE: 25 ETE: 50 PRE: 0
5. Credits: 2
6. Semester: VI
9. Objective Processes: To make students aware of the ethics and codes of conduct required by Engineers and Professionals.
10. Details of the Course:
Sl Name of Books, Authors, Publishers Contact Hours
No.
Human Values and Ethics: Morals, Values, Ethics and Integrity, Need for Value
1 Education for Engineers, Happiness, Prosperity, Harmony.
6
Code of Ethics and Professionalism: Professionalism and the Code of Ethics,
2 Technical Education, Human Values and Coexistence, Universal Human Order,
Natural acceptance. 6
Professional Ethics and Technology :Science, Technology and Professional

3 EthicsEngineering Ethics, Environmental Ethics, Safety, Responsibility and Rights 8
Case Studies: Holistic Technologies, Eco-friendly production systems, The role of 8
4 responsible engineers and technologists, Global Issues concerning Engineers
Total 28
Suggested Reference:
Sl.No. Name of Books, Authors, Publishers
1. Professional Ethics, Subramanian, R, Oxford University Press, 2011 ISBN13: 978-0-19-808634-5

2. Professional Ethics and Human Values,Govindarajan, M. S. Natarajan, V.S. Senthilkumar PHI,
2013ISBN: 978-81-203-4816-5
3. Constitution of India and Professional Ethics, Reddy, G.B. and Mohd. Suhaib, IK International Publishing
House. 2006 ISBN: 81-89866-01-X
4. Introduction to Engineering Ethics (2nd Ed.) Martin, Mike W. and Roland Schingzinger McGraw-Hill,
2010 ISBN 978-0-07-248311-6
1. Subject Code: AE401 Course Title: B.Tech Project-I

2. Contact Hours: L:0 T:0 P:0
DRAFT AE-26
5. Credits: 4
6. Semester: VII
9. Objective: To familiarize the students to work in group and develop an independent understanding of engineering and
analysis of engineering systems. He should also be able to write and present the work done during the course.
Subject Code: AE403 Course Title: Training Seminar

2. Contact Hours: L: 0 T:0 P:0
5. Credits: 2
6. Semester: VII
9. Objective: To familiarize the students to work in industry and working culture of the industrial system. He should also be
able to write and present the work done during the course.
1. Subject Code: AE405 Course Title: Alternative Fuels and Energy Systems
5. Credits: 4
6. Semester: VII
9. Objective:To understand the need for the alternative fuels. To analyse the demand of energy for transportation and industry.
To enable the students to analyse the requirement of fuels for use in IC engine. To estimate the demand and availability of
alternative fuels. To compare the alternative fuel with present petro-fuels. To emphasise their advantages and limitations.

S. No. Contact
Contents Hours
1 Introduction : Estimation of petroleum reserves - need for alternative fuels - availability and 8
suitability to piston engines, Concept of conventional fuels, potential alternative fuels - ethanol,
methanol, DEE/DME - hydrogen, LPG, Natural gas, producer gas, bio gas and vegetable oils - use
in CI engines-merits and demerits of various fuels.
2 Alcohol Fuels : Properties as engine fuels - performance in SI engines - blends with gasoline and 6
diesel - flexible fuel vehicle - Reformed alcohols - use in CI engines - emulsions
3 Dual fuel systems -spark assisted diesel engines –Surface ignition engines - ignition accelerators 6
- combustion and emission characteristics in engines - emission characteristics.
4 Gaseous Fuels : Hydrogen - properties - use in CI engines - use in SI engines - storage methods - 8
safety precautions. Producer Gas and biogas - raw materials - gasification - properties - cleaning
up the gas - use in SI and CI engines, LPG & CNG - properties - use in SI and CI engines.
5 Vegetable Oils : Conversion of vegetable oils as biodiesel –production techniques - standards and 6
properties - performance and Emission characteristics, additives.
6 Electric and solar powered vehicles : Layout of an electric vehicle - advantage and limitations - 8
specifications - system component. Electronic Control system - high energy and power density
batteries - hybrid vehicle - solar powered vehicles.
Total 42

1 Osamu Hirao and Richard K. Pefley, Present and Future Automotive Fuels, John Wiley and Sons, 1988.ISBN:
DRAFT AE-27
047180259x
2 Keith Owen and Trevor Eoley, Automotive Fuels Handbook, SAE- Publications, 1990, ISBN 978-0-7680-
0052-8
3 Richard L.Bechtold, Automotive Fuels Guide Book, SAE- Publications, 1997
4. Godfrey Boyle, “Renewable Energy”, Oxford University Press, 2004, ISBN: 9780199545339
1. Subject Code: AE407 Course Title: Production and operations management

5. Credits: 4
6. Semester: VI
9. Objective:This course aims to introduce the students to operations strategy, product and process design; demand forecasting
and inventory control methods.
S. No. Contact
Contents Hours
1 Operations strategy and competitiveness : Introduction to POM, Operations strategy, strategy 9
design process, corporate and operations strategies, Operations competitive dimensions.
2 Product and Process Design : Product design and development processes, product life cycle, 9
Process flow chart, Types of processes, Process performance, Learning curve.
3 Facility location and Layout: Factors affecting the location decisions, methods of facility location- 8
factor rating systems, centroid method, and profit volume analysis; Types of layout, Block diagram
and Assembly Line Balancing.
4 Demand Forecasting : Qualitative and quantitative forecasting, Time series and regression models, 8
Measures of forecasting errors.
5 Inventory model : Importance of inventory, understocking and overstocking, Fixed order quantity 8
models and fixed time period models (EOQ models), Selective inventory management- ABC, VED,
and FSN analysis. Unit VI Lean Manufacturing : JIT manufacturing system, Toyota production
systems- KANBAN model, and elimination of waste.
Total 42

TEXT BOOKS:
1 Jay Heizer, Barry Render, Operations Management,; Publisher-Pearson learning (ISBN 9780132658812)
2 Chase, Jacob, and Aquilano ,Operations management for competitive advantage;; Publisher-TMH(ISBN
9780072983937)
3 Buffa and Serin, Modern Production/Operations Management, Publisher- John Weily India (ISBN
8126513721)
1. Subject Code: AE409 Course Title : Computer Aided Vehicle Design and Safety
5. Credits: 4
6. Semester: VII
7.Subject Area: DCC
9. Objective: To enable the students to understand the basics of Vehicle design process, design parameters and some relevant
DRAFT AE-28
software. To understand the need for vehicle safety and the basic components of vehicle safety. To be familiarize with the
existing and latest safety systems.
S. Contact
No. Contents Hours
1 Introduction: Study and Selection of a Vehicle; Specifications – Choice of Cycle, Fuel, Speed, 6
Cylinder Arrangement, Number of Cylinders, Method of Cooling, Material, Design Variables and
Operating Variables Affecting Performance and Emission of a vehicle. Performance Curves:
vehicle Residence, Power and Torque Curve, Driving Force Against Vehicle Speed-Acceleration
and Gradability in Different Gears for A Typical Car Or Truck Plotted From Specifications
2 Vehicle Body Details: Types: Saloon, Convertibles, Limousine, Estate Car, Racing and Sports 8
Car. Visibility: Regulations, Driver’s Visibility, Test for Visibility, Methods of Improving
Visibility and Space in Cars. Safety Design, Safety Equipments for Cars. Car Body Construction;
Design Criteria, Prototype Making,
3 Vehicle Aerodynamics: Objectives. Vehicle Drag and Types: Various Types of Forces and 8
Moments, Effects of Forces and Moments, Side Wind Effects on Forces and Moments, Various
Body Optimization Techniques for Minimum Drag, Wind Tunnel Testing: Flow Visualization
Techniques, Scale Model Testing, Component Balance to Measure Forces and Moments. Gear
Ratios Determination of Gear Ratios, Acceleration and Gradability
4 Engine Design: Pressure Volume Diagram, Frictional Mean Effective Pressure, Engine Capacity, 8
Calculation of Bore and Stroke Length, Velocity and Acceleration, Gas Force, Inertia and
Resultant Force At Various Crank Angles – Side Thrust on Cylinder Walls.
5 Indian and International Vehicle safety standards, requirement, various crash test methods, 6
Initial Tests, Crash Tests on Full Scale Model, Dummies and Instrumentation, their computer
aided simulations and applications.
6 Testing for Emissions: Various emission standards, standard test procedure, assessment of 6
various emission control technologies, case studies
Total 42
TEXT BOOKS:
1 Automobile Mechanics by Giri. N.K., Khanna Publishers – New Delhi – 2002, ISBN-13. 978-81-7409-
216-1
2 High Speed Combustion Engine by Heldt. P.M., Oxford &Ibh Publishing Co., Calcutta 1989, ISBN-1-
56091-563-3
3 Vehicle Body by J. Powloski, Business Books Ltd, London – 1989, ISBN 1356 -1448
REFERENCE BOOKS:
1 I C Engines by Lichty, Kogakusha Co., Ltd. Tokyo, 1991, ISBN-1-56091-563-3
2 Body Construction and Design by Giles. J.C., Liiffe Books Butterworth & Co, ISBN Number: 0-7680-
0708-9
3 Vehicle Body Layout and Analysis by John Fenton– Mechanical Engg. Publication Ltd., London, ISBN,
0852984456
4 Vehicle Body Building and Drawing by Braithwaite.J.B.– Heinemann Educational Books Ltd., London,
ISBN-13: 9781846289941
1. Subject Code: AE-402 Course Title: B.Tech project-II

2. Contact Hours: L:0 T:0 P:0
3. Examination Duration (Hrs.): Theory:0 Practical: 0
4. Relative Weight: CWS: 0 PRS: 0 MTE: 0 ETE:0 PRE: 0
5. Credits: 8
6. Semester: VIII
DRAFT AE-29
9. Objective: To familiarize the students to work in group and develop an independent understanding of engineering and
analysis of engineering systems. He should also be able to write and present the work done during the course.
Departmental Elective Courses (DEC)
DRAFT AE-30
1. Subject Code: AE305 Course Title: Automotive Aerodynamics & CFD
5. Credits: 4
6. Semester: V
7. Subject Area: DEC
9. Objective:To introduce the student with aerodynamics, computational fluid dynamics, styling of vehicles, heat management
of engines and wind tunnel testings.
S. No. Contact
Contents Hours
1 Aerodynamics for Automobiles - Fluid Properties, Fluid Statics, Measurement of Pressure, 9
Fluid Kinematics, Fluid Dynamics, Euler and Bernoulli Equations, Ns Equations, Di
mensional Analysis And Similitude, Viscous Flow, Flow Over Immersed Bodies, Boundary
Layer, Production of Lift and Drag, Effect of Aerodynamic Forces on Stability of the Vehicle.
2 Computational Fluid Dynamics - Fundamentals of CFD Basics of Finite Difference and Finite 9
Volume Methods, Boundary Conditions, Initial Conditions, Choice of Turbulence Models,
Merits And Limitations of Commercial CFD Tools.
3 Aerodynamic Styling of Vehicles - Effect of Shape and Size of Various Exterior Parts of the 8
Vehicle on the Drag Force, Details of Effect of Shape on Aerodynamics of Various Vehicles:
Passenger Car, SUV, Utility Van, Mini Bus, Bus, Cargo, Truck and Towing Vehicle
Aerodynamics of Race Cars- AE-Rodynamic Features of Race Cars, Measures to Create
Negative Lift, Front and Rear Wings, Stability Consideration, Fluid Flow Over Brakes.
4 Thermal Management in Vehicles - Engine Cooling Requirements, Underhood Cooling, 8
Mechanism of Drag Production by the Cooling System.
5. Experimental Procedure and Facilities - Basics of Wind Tunnels, Types of Wind Tunnels, 8
Instrumentation for Wind Tunnels: Pressure Measurement, Velocity Measurement, Force and
Moment Measurement Devices, Flow Visualization, Case Studies of Different Wind Tunnels
Used for Vehicle Aerodynamics Experimentation.
Total 42
1
Bruce R. Munson, Donald F. Young, Theodore H. Okishi, Fundamentals of Fluid Mechanics, 4th Edition, John
Wiley and Sons Inc, 2005, ISBN 0471675822
2 John F. Doughlas, Janusz M. Gasiorek, John A. Swaffield, , Fluid Mechanics, 5th Edition, Prentice Hall, 2006,
ISBN 0131292935
3 Hucho W. H., Aerodynamics of Road Vehicles, 4th Edition, SAE- International, 2005, ISBN 0768000297
4. Joseph Katz, Race Car Aerodynamics, Robert Bentley Publishers, Cambridge, 1995, ISBN 0837601428
5. Barnard R.H., Road Vehicle Aerodynamic Design: An Introduction, Mechaero Publishing, March 2010, ISBN
0954073479
6. Jewel B. Barlow, Willium H. RAE, Alan Pope, Low Speed Wind Tunnel Testing, 3rd Edition, Wiley Interscience,
1999, ISBN 0471557749
7. Holman J.P., Heat Transfer, 8th Edition, Mc Graw Hill Company, Uk, 2001, ISBN 0072406550
8. Steven Daly, Automotive Air-Conditioning and Climate Control Systems, Butterworth-Heinemann, May, 2006,
ISBN 0750669551
DRAFT AE-31
1. Subject Code: AE307 Course Title: Combustion Generated Pollution
5. Credits: 4
6. Semester: V
9. Objective:To introduce the students with types fuels, emissions from various engines, exhaust treatment of various engines
and instruments used for measuring emissions
S. No. Contact
Contents Hours
1 Combustion fundamentals: Fuels, alternative fuels for IC engines, Type of hydro carbons. Gasoline 8
specifications. Effect of Engine parameters on performance, fuel injection for SI engines, Engine
vehicle road performance, road performance and fuel economy.
2 Emissions and air pollution: Automotive Emissions and their role in air pollution. Photo chemical 8
smog. Chemistry of smog formation. Combustion in Homogeneous mixtures, emission formation.
Incomplete combustion, formation of hydro carbons, Carbon monoxide and oxides of nitrogen.
Aldehyde emissions.
3 SI engine combustion Emissions: Influence of design and operating variables on gasoline engine 6
exhaust emissions.Hydrocarbon Evaporative Emissions: Various sources and methods of their
control. Canisters for controlling evaporative emissions. Emission control systems for gasoline
engines: Blow by control closed PCV system design.
4 CI engine combustion Emissions: Sources of emissions during combustion. Effect of air fuel 6
ratio, speed, injection timing on performance and emission formation. D.I and I.D.I engine
emissions,smoke emission from diesel engines
5. Exhaust treatment devices: Air injection into exhaust system, Thermal reactors, Catalytic convertor. 8
Stratified charge engines. Honda CVCC engine. Methods of reducing emissions exhaust gas
recirculation.
6. Emission Instruments: Non- dispersive Infrared analyzer, Gaschromotograph, flame ionization 6
detector, Chemiluminescent analyzer
Total 42

1
B.P. Pundir, Engine emission :, Narose Publication ISBN-13: 978-8184870879
2 Paul Degoberd, SAE Automobile and air pollution, SAE Publication ISBN 978-. 07680-6437-7
3 J.P. Heywood, Fundamentals of I.C. Engines,Tata McGraw Hill Publication. ISBN 13: 9780071004992
1. Subject Code: AE309 Course Title: Operation Research

5. Credits: 4
6. Semester: V
9. Objective:This course aims to introduce students to use mathematical approach for effective decision making, model
DRAFT AE-32
formulation and applications that are used in solving business decision problems. After study, the students will be able to solve
the real life problems and obtaining the right solution requires understanding and modelling the problem carefully and
applying appropriate optimization tool and skills to solve the mathematical models.
S. No. Contact
Contents Hours
1 Introduction :Nature, Scope and Historical developments, Linear programming- Model 8
formulation, Graphical and simplex methods, Duality, Degeneracy, sensitivity analysis.
2 Transportation :North-West corner rule, Least cost method, VAM, Methods to check the 8
optimality, Assignment- Hungarian method and Sequencing models: Johnson Rule for n- job two-
machine, n- job m- machine.
3 Queuing theory :Assumptions and applications of waiting line theory, M/M/1: /FCFS, M/M/K: 6
/FCFS, M/M/K
4 Game theory and its applications : Pure and mixed strategy, dominance principle, Algebraic, 6
arithmetic, and graphical methods to solve GT problems.
5. Replacement models: Replacement policy for the items that deteriorate over time, replacement 8
policy for the items that deteriorate over time when time value of money is declining, replacement
policy for the items that fails suddenly.
6. Network Planning : PERT, CPM, Project crashing, Shortestpath problem, Maximum flow 6
problem, Minimum spanning tree problem, minimum cost flow problem, Resource levelling.
Total 42

1
Operations Research: Theory and Applications by J K Sharma, Macmillan, ISBN: 9780230638853
2 OperationsResearch: An introduction by H A Taha, Pearson Education, ISBN: 978-0132555937
3 Operations Research: Concepts and cases by F S Hiller and G J Liebermaan, TMH, ISBN:0073523453
4. Quantitative Technique in Management by N D Vohra, TMH, ISBN: 9780070611931
1. Subject Code: AE311 Course Title: Tyre Technology

5. Credits: 4
6. Semester: V
9. Objective:This course aims to introduce the students with types of tyres used for different vhicles, design of tyres,
manufacturing of tyres and testing of tyres.
S. No. Contact
Contents Hours
1 Introduction : Importance of tyres, history, current status, functions of pneumatic tyres, applications, 8
types of tyres, desirable tyre properties, classification of tyres based on carcass, tyre profile, geometry,
sizing & designation, tyre components, principle of pneumatic tyre, requirements of pnumetictyres.
2 TyreDesign : General, motion forces, heat build up, types of bonding, set of service conditions, tyre 8
size requirements, safety requirements: Tread design, general, role of foot print area and factors
affecting tread life, various types of tread pattern. Carcass design, role of foot print area and factors
affecting tread life, various types of tread pattern. Carcass design, role of various fibers used in
carcass, estimation of number of piles, Bead design, single bead, multiple beads, and various
configurations of wires in bead assembly.
3 Compound Design : General introduction, role of various mixing ingredients, various recipes. 8
4 Manufacture Technology : Compound mixing, mixing equipments, extrusion of components, tyre 8
DRAFT AE-33
cord, wire cord manfacture, calendaring tyre manufacture, mold procurement, component
preparation, green tyre building, pre curing, curing and post curing operations/treatments.
5. Tyre testing/ Evalution Methods : General safety standards, carcass strength, resistance to bead 8
unseating, machine simulation test, indoor laboratory testing, field-test on roa, proving ground, lates
testing techniques.
Total 42

1
Tyre Technology, S.N. Chakravarty, Indian Rubber Institute
2
1. Roop S. Bhakuni, Surendra K. Chawla, D. K. Kim,D. Shuttleworth,Tires Cord, Encyclopedia of Chemical
Technology, Kirk &Othmer, John Wiley & Sons, 2000
3 E.C. Wood, Pneumatic Tyre Design, W. Heffer, 1952
4. Tire Engineering, Kovac& Rodgers, Goodyear Tire Rubber Co., Ohio 3.
Handbook of Rubber Technology, R. Schuster, Wiley Interscience
1. Subject Code: AE313 Course Title: Thermal Engineering

5. Credits: 4
6. Semester: V
9. Objective:This course introduces students with types of boilers, steam nozzles, types of steam turbines, steam condensers
and centrifugal compressors.
S. No. Contact
Contents Hours
1 Introduction to Boilers : Classification of boilers, boiler mountings and accessories; draft systems, 6
circulation system; combustion and its calculations, and boiler performance.
2 Steam Nozzles : Types of nozzles, flow of steam through nozzles; condition for maximum discharge 8
through nozzle; nozzle efficiency,effect of friction and supersaturated flow through nozzle.
3 Steam Turbines : Working principle and types of steam turbines; velocity diagrams for impulse and 8
reaction turbines, compounding of impulse turbines; optimum velocity ratio and maximum
efficiency,blade twisting, comparison of impulse and reaction turbines,condition line and reheat-factor,
losses in steam turbines; governing of steam turbines.
4 Steam Condensers: Types and working of condensers, types and performance of cooling towers. 6
5. Reciprocating Air Compressor : Steady flow analysis, isothermal, adiabatic and polytropic 8
compression; single and multi-stage compression, ideal intermediate pressure; compressor clearance,
volumetric and isothermal efficiency; minimum work requirement of a compressor.
6. Centrifugal compressor : Velocity diagrams, efficiency of compressor stage, choice of reaction, stage 6
pressure rise, surging, multi-stage compressor, compressor performance, vaccum pump.
Total 42

1 P.K. Nag,"Engineering Thermodynamics",Publisher-Tata Mcgraw Hill Publishing Company Limited(ISBN-
1259062562)
2 Gordon Rogers,"Engineering Thermodynamics",Publisher-Pearson Education( ISBN-8131702065)
3 Kenneth Wark,"Thermodynamics",Publisher-Mcgraw-hill Book Company(ISBN-0070682844)
4. Gordon Rogers and Yon Mayhew, "Engineering Thermodynamics", Publisher-Pearson publisher(ISBN-
9788131702062)
DRAFT AE-34
5. Van Wylen and Sonntag, "Fundamentals of Classical Thermodynamics" ,Publisher- John Wiley & Sons
Inc.(ISBN-0471041882)
6. Moran and Shaprio, "Fundamentals of Engineering Thermodynamics ", Publisher-John Wiley & Sons,
Inc.(ISBN-9780470032091)
7. Cengel and Boles,"Thermodynamics: An Engineering Approach ", Publisher-The McGraw-Hill
Companies(ISBN-9789814595292)
8. T.D. Eastop,"Applied Thermodynamics for Engineering Technologists" ,Publisher- Longman publisher(ISBN-
9788177582383)
9. S. Domkundwar,"Thermal Engineering",Publisher-DhanpatRai& Co (p) Ltd 9(ISBN-8177000217)
10 onkar singh,"Applied Thermodynamics",Publisher- New Age International (p) Limited(ISBN-8122425836)
1. Subject Code: AE315 Course Title: Turbo machinery and gas dynamics
5. Credits: 4
6. Semester: VI
9. Objective:This course aims to introduce the student with principles of Turbomachinery, types of turbo devices such as
turbines, fans and blowers. This course also offers about the gas dynamics and jet propulsion in engines.
S. No. Contact
Contents Hours
1 Turbomachinery Principles, Energy transfer between fluid and rotor, classification of fluid machinery, 8
dimensionless parameters, specific speed, applications, stage velocity triangles, work and efficiency
for compressors and turbines.
2 Centrifugal Fans And Blowers : Types, stage and design parameters, flow analysis in impeller 8
blades, volute and diffusers, losses, Characteristics curves and selection, fan drives and fan noise.
3 Centrifugal And Axial Flow Compressors : Construction details, types, impeller flow losses, slip 6
factor, diffuser analysis, losses and performance curves. Stage velocity triangles, enthalpy-entropy
diagrams, stage losses and efficiency, work done factor, simple Stage design problems and
performance characteristics.
4 Axial And Radial Flow Turbines :Stage velocity diagrams, reaction stages, losses and coefficients 6
blade design principles, testing and Performance characteristics.
5 Gas Dynamics:- Continuity Equation, Momentum Equation, Energy Equation, Stagnation 8
Properties; Isentropic Flow With Variable Area, Wave Motion; Flow With Normal Shock Waves,
Oblique Shock Waves, Flow in Constant Area Duct With Friction and With Heat Transfer,
Measurement of Fluid Properties, Anemometer, Flow Visualization.
6 Jet Propulsion:- Aircraft Propulsion Theory, Ramjet Engine, Pulsejet Engine; Rocket Propulsion, 6
Liquid Propellant, Solid Propellant, Rocket Propulsion Theory, Rocket Applications, Space Flights.
Total 42

1
S.M. Yahya, " Fundamentals of Compressible Flow ", John Wiley and Sons Ltd, 1994, ISBN8122403727
2 P.Hill and C. Peterson, " Mechanics and Thermodynamics of Propulsion ", Pearson Education,2009
ISBN0132465485
DRAFT AE-35
3 N.J. Zucrow, " Aircraft and Missile Propulsion, Vol. I & II ", John Wiley , 1958, ISBN 1258694360
4 N.J. Zucrow, " Principles of Jet Propulsion and Gas Turbines ", John Wiley, New York, 1957,
5 H.Cohen, G.E.C.Rogers and Saravanamuttoo, " Gas Turbine Theory ", Longman Group Ltd., 1996, ISBN
0582236320
6 A.H.Shapiro, " Dynamics and Thermodynamics of Compressible Fluid Flow Vol. l ", John Wiley , 1953, ISBN
0471066915
7 V.Ganesan, " Gas Turbines ", Tata Mcgraw Hill Publishing Co., New Delhi, 2010, ISBN 0070681929,
8 G.P.Sutton, " Rocket Propulsion Elements ", John Wiley, 2010, New York, ISBN 0470080248
1. Subject Code: AE-317 Course Title:Power units and transmission

5. Credits: 4
6. Semester: VI
9. Objective:To understand the requirement of Automotive Power Plant. To know the power characteristics of IC engine and
other Automotive Power Plants. To analyze the means of power transmission from engine to driving wheels. To know the
working of the electrical/hybrid system power transmission.

S. No. Contact
Contents Hours
1 Transmission: Introduction, requirements of automobile propulsion and transmission system, 8
Discussion on tractive effort and other performance parameters.
2 Clutch: Need of clutch, types of clutches, construction of clutch systems and clutch plates, 8
operation and torque transmission characteristics. CVT, diaphragm and centrifugal clutch and fluid
flywheel.
3 Gear box: Requirements of gearbox, different types of gear boxes vizsliding ,constant mesh and 6
Synchromesh, construction details of gear boxes.
4 Hydro-dynamic drive: Fluid coupling, principle and operation torque capacity performance 6
characteristic, torque converter construction, principle of operation, torque capacity, multistage
torque converter performance.
5 Automatic transmission: Construction and operating principle, three forward and reverse, four 8
forward and reverse. Over drive unit need and its operation. Hydrostatic drive: construction and
operation. Electric drive Ward Leonard control system, construction and operation, advantages and
disadvantages.
6 Drive line and Differential: Need and construction of drive line components, universal joints. 6
Need and requirement of differential, principle of operation and construction. Limitations of
ordinary differential and concept of limited slip differential.
Total 42

1
Crouse W and Anglin D, Automotive Mechanics, Tata Mcgraw Hill Publication ltd 10thedition 2004 ISBN
Number: 0-7680-0708-9
2 Nakra C P, Basic Automobile, Dhanpat Rai Publication Co. Ltd 7th Edition2005 ISBN, 978-93-5216-040-2
3 JosepeHeitner Automotive Mechanics – Principle and Practice, East West Press 2nd edition 1999.
ISBN:9788176710152 8176710156
DRAFT AE-36
4 Motor Vehicle by Newton, Gerreand Steeds, BH publications.ISBN 9780195699630
5 P S Gill, Automobile Engineering, Unit - I, II, III, SK Kataria& Sons, ISBN 978-81-89757-22-9
1.. Subject Code:AE319Course Title:Computer Simulation of I.C. Engine Process

5. Credits: 4
6. Semester: VI
9. Objective:To know the basic combustion in IC engine .to learn some relevant simulation softwares. To analyse
combustion for the performance parameters. To analyse the combustion for emission .to understand the impact of
combustion chamber geometry and other related parameters on combustion in IC engine.
S. No. Contact
Contents Hours
1 Introduction : Introduction - Heat of Reaction - Measurement of URP- Measurement of HRP - 11
Adiabatic Flame Temperature: Complete Combustion in C/H/O/N Systems, Constant Volume
Adiabatic Combustion, Constant Pressure Adiabatic Combustion. Calculation of Adiabatic Flame
Temperature - Isentropic Changes of State.
2 Engine Simulation With Air As Working Medium : Deviation Between Actual and Ideal Cycle - 10
Problems, SI Engine Simulation With Adiabatic Combustion, Temperature Drop Due to Fuel
Vaporisation, Full Throttle Operation - Efficiency Calculation, Part-Throttle Operation, Super
Charged Operation.
3 Engine Simulation Fuel Air and actual cycles: Deviation Between Actual and Ideal Cycle - 11
Problems, SI Engine Simulation With Adiabatic Combustion, Temperature Drop Due to Fuel
Vaporisation, Full Throttle Operation - Efficiency Calculation, Part-Throttle Operation, Super
Charged Operation.
4 Progressive Combustion : SI Engines Simulation With Progressive Combustion With Gas Exchange 10
Process, Heat Transfer Process, Friction Calculation, Compression of Simulated Values, Validation of
the Computer Code, Engine Performance Simulation, Pressure Crank Angle Diagram and another
Engine Performance. Simulation of 2-Stroke SI Engines.
5 CI Engine Simulation: Mixing of Air & Fuel, Multi Zone Model for Combustion, Different Heat
Transfer Models, Equilibrium Calculations, Simulation of Engine Performance, Simulation for
Pollution Estimation.
6 SI Engine Simulation: Multi Zone Model for Combustion, Different Heat Transfer Models,
Stoichiometric Calculations, Simulation of Engine Performance, Simulation for Pollution Estimation.
Total 42

1
Ganesan.V. “Computer Simulation of Spark Ignition Engine Process ", Universities Press (I) Ltd, Hyderabad,
1996. ISBN 9780195699630
2 Ramoss.A.L., " Modelling of Internal Combustion Engines Processes ", Mcgraw Hill Publishing Co., 1992
ISBN 0-76-80-0052-1
3 A shleyCampbel, " Thermodynamic Analysis of Combustion Engines ", John Wiley & Sons, New York, 1986.
ISBN-13: 9780898747744
4 Benson.R.S., Whitehouse.N.D., " Internal Combustion Engines ", Pergamon Press, Oxford, 1979 ISBN 13:
9780080227207
1.. Subject Code: AE321 Course Title:Advanced strength of material

DRAFT AE-37
5. Credits: 4
6. Semester: VI
9. Objective:this course introduces the students with theory of elasticity, torsion of non-circular sections, deformation and
design of members for fatigue and creep.
S. No. Contact
Contents Hours
1 Theory of Elasticity: Plane stress and plane strain problem, strain-displacement relation, stress - strain 9
relations, equilibrium equations, body force, compatibility equations, airy stress function, analysis of
simple two dimensional problems in Cartesian coordinates.
2 Plates: Bending of circular plates carrying uniformly distributed load over entire surface or with 9
concentrated load at centre, simply supported rectangular plate carrying uniformly distributed
(excluding derivation of formulae).
3 Torsion of non-circular section shafts: St. Venant's methods, torsion of shafts of elliptical and 8
rectangular sections, membrance analogy, torsion of shafts of thin tubular section. Laterally loaded
columns: Analysis of long columns carrying lateral loads in addition to axial compression eccentrically
loaded columns. Beams on Elastic Foundations: Modules of foundation, equation of elastic curve,
solution for beams of infinite and semi infinite length.
4 Deformation beyond elastic limit:Behaviour of material beyond elastic limit, perfectly plastic 8
material, torsion of shafts and analysis of thick cylinders with radial pressure when loaded beyond
elastic limit, residual stresses. Mechanics of forming processes: Mechanics of wire drawing and tube
drawing through cylindrical and conical dies,calculation of draw forces, effect of back pull, mechanics
of forging process.
5 Miscellaneous Topics: Contact stress in ball and roller bearings, bending of curved tubes, stress 8
analysis of flywheel. Design of members for fatigue and creep: Fatigue behaviour, factors affecting
fatigue, mechanics of fatigue failure, fatigue under combined stresses, fatigue life and cumulative
fatigue, design formulae for fatigue calculations. Mechanics of creep, relationships regarding
creepratesat different stresses and temperature, bending of beams at high temperature, stress
relaxation in steam turbine bolting, creep under combined stresses, creep analysis of rotating discs.
Total 42

1 E.J. Hearn,"Mechanics of Materials: v. 2: An Introduction to the Mechanics of Elastic and Plastic Deformation of
Solids and Structural Components",Publisher-ELSEVIER, New Delhi, 2008(ISBN-8131214567)
2 Timoshenko,"Strength of Materials: vol. 2 ",Publisher-CBS Publishers & Distributors, 2002(ISBN-8123910770)
1. Subject Code: AE323 Course Title: Finite Element Methods and Applications
5. Credits: 4
6. Semester: VI
9. Objective: To introduce the student with fundamentals of finite element method, Parametric element stresses and strains,
application of FEM in various mechanical field and use a software to perform analysis.
S. No. Contact
Contents Hours
DRAFT AE-38
1 Fundamental concepts of the Finite Element Method. Various element shapes, Displacement Model, 9
Derivation of stiffness matrix for the element and for the entire domain.
2 ISO parametric elements Element stresses and strains. 9
3 Derivation of force and displacement vectors for the entire domain. Boundary conditions, Solution 8
of the overall problems.
4 Applications of finite element method to various field problems such as solid mechanics, fluid 8
mechanics and heat transfer.
5 Use of Software such as ANSYS/ NASTRAN/IDEAS. Basic feature of these softwares. 8
Total 42

1 O.C. Zienkiewicz& R.A. Taylor,"Finite element Method",Publisher-Mc Graw Hill, 1989( ISBN-0070991936)
2 C.S. Krishnamurthy,"Finite element Analysis",Publisher-Tata McGraw Hill Publishing Company
limited(ISBN-0074622102)
3 Kenneth H. Hubener,"Finite element Method",Publisher-John Wiley & Sons,Inc(ISBN-0471370789)
DRAFT AE-39
1.Subject Code: AE308 Course Title: Measurementand Instrumentation
5. Credits: 4
6. Semester: VI
9. Objective:This course aims to introduce the student with general measurement systems, instruments used to measure
various mechanical parameters, terminologies of various instruments, measuring of components.
S. No. Contact
Contents Hours
1 Basic concepts, Generalised Measurement System: definition of terms, calibration, standards and 8
errors, static and Dynamic performance characteristics; analysis of experimental data
2 Iinstrumentation for measurement of Position and displacement, force, Strain,pressure, temperature, 6
proximity and range. Concept of feedback;
3 open and close loop systems : Loop control systems,transducers and devices for applications, digital 8
readouts, data Acquisition and processing.
4 introduction, measuring instruments, measuring range, sensitivity, repeatability, precision and 6
accuracy.
Standards : definitions of line standard, end standard and wavelength standard, sub divisions of
Standards. Slip gauges. Measurement of angles : introduction, bevel venire protractor, sine bar, angel
gauges, spirit level, Autocollimator, angle dekkor, rotary tables, precision polygon, calibration of
polygons. Measurement of internal and external tapers.
5 Measurement of threads: introduction, screw thread terminology, pitch error, angle error, 8
measurement of major and minor diameter, measurement of effective diameter by one wire, two
wire and three wire Method. Best size wire. Measurement of surface finish: introduction, surface
texture, surface roughness terminologies, methods of measuring surface finish, stylus probe
instruments, taylorhobsontalysurf, sample length or cutoff Length, analysis of surface traces.
6 Gear measurements: introduction, terminology of gear tooth, errors in manufacturing gears, rolling 6
Test, measurement of tooth thickness, Parkinson gear tester. Inspection of straightness, flatness, and
alignment. Interferometry and use of optical flats. Measurement of coordinates using coordinate
measuring machine.
Total 42

1
T.G.Beckwith,“Mechanical measurements”, N. L. Buck and R. D. Marangoni, 3rd Ed, Narosa Publishing
house.1993, ISBN 10: 0201004542 ISBN 13: 9780201004540
2 R. K. Jain,“Metrology”,Khanna pub. 2002, ISBN-13978-81-7409-153/ISBN-1081-7409-153
3 C. Dotson,“Fundamentals of dimensional metrology”, R. Harlow and R. Thomson. Pub. 2003, ISBN-13: 978-
1418020620/ISBN-10: 1418020621
4 B. C. Nakra and K. K. Chaudhari,“Insrumentation, measurement and analysis”,Tata McGraw-Hill, 19855, ISBN
0070482969, 9780070482968
5 E. O. Doeblin,“Measurement system- application and design, 4th Ed”, Tata McGraw-Hill, 1990, ISBN-13: 978-
0072922011/ISBN-10: 007292201X
6 Turner and Hill,“Instrumentation for Engineers and Scientists”, Oxford university Press, ISBN-10: 0198565178
ISBN-13: 978-0198565178
DRAFT AE-40
1. Subject Code: AE310 Course Title:Advanced Manufacturing Technology
5. Credits: 4
6. Semester: VI
9. Objective:This course aims to understand the functioning of new machining processes working on principle of non-thermal
energy, Electro-chemical machines, laser beam machines, fabrication of semiconductors.
S. No. Contact
Contents Hours
1 NEWER MACHINING PROCESSES 9
(Non thermal energy) – Abrasive machining – water jet machining - ultrasonic machining -
chemical machining – electro chemical machining – construction working principle – steps - types
– process parameters – derivations – problems, merits, demerits and applications .
2 NEWER MACHINING PROCESS – Wire cut EDM - Electro chemical machining – ECG - 8
Electric discharge machining – construction – principle – types – control - circuits – tool design –
merits, demerits & applications.
3 NEWER MACHINING PROCESS – Laser beam machining – Electron beam machining – 9
Plasma arc machining – Ion beam machining – construction working principle types – process
parameter – derivations – problems, merits, demerits and applications.
4 FABRICATION OF MICRO DEVICES Semiconductors – films and film depurification – 8
Oxidation - diffusion – ion implantation – etching – metallization – bonding – surface and bulk
machining – LIGA Process – Solid free form fabrication.
5 MICROFABRICATION TECHNOLOGY Wafer preparation – monolithic processing – 8
moulding – PCB board hybrid & mcm technology – programmable devices & ASIC – electronic
material and processing.– steriolithography SAW devices, Surface Mount Technology
Total 42

1
SeropeKalpakjian& Steven Schmid- Manufacturing Processes for Engineering Materials (5th Edition)–
2003,ISBN-13: 978-0132272711/ISBN-10: 0132272717
2 Julian W. Gardner,“Micro sensors Mems & smart devices—2002”, Wiley-Blackwell, ISBN-13: 978-
0471861096
3 Grahem T. Smith, “Advanced machining”, I.F.S. UK 1989, ISBN-10: 0903608952/ISBN-13: 978-0903608954
4 Jaeger R.C., “Introduction to microelectronic fabrication”, Addison Wesley, 1988., ISBN-10:
0201444941/ISBN-13: 978-0201444940
5 NarioTaniguchi ,“Nano technology”, Oxford University Press 1996.,
6 Pandey P.C. & Shan HS,“Modern Machining Processes”, Tata McGraw-Hill Education, 1980, ISBN
0070965536, 9780070965539
7 More Madon, “Fundamentals of Microfabrication”, CRC Press, 1997., ISBN 0849308267, 9780849308260
DRAFT AE-41
1. Subject Code: AE312 Course Title:Quality Management & Six Sigma Applications
5. Credits: 4
6. Semester: VI
9. Objective:To familiarize the student with quality, statistical control of processes, sampling process, ISO standards for six-
sigma quality, life testing and reliability design.
S. No. Contact
Contents Hours
1 Introduction to Quality : Definition of Quality- product, user, value, and manufacturing based 8
perspectives, Dimensions of Quality, Quality Planning, Quality costs- optimization of quality costs,
seven tools of quality control;Philosophies of Quality Gurus- Deming, Juran, Crosby, Feigenbaum,
Ishikawa, Taguchi. Comparison of Quality Philosophies.
2 Statistical Process Control : Introduction to Qualitycharacteristics- variables and attributes, Types 8
and causesof variations, Control Charts for variables and attributes,Process capability.
3 Acceptance Sampling : Sampling process and lots formation;Advantages and applications of 6
acceptance sampling;characteristics of O.C. Curve; Single, double, multiple,sequential sampling;
ASN, ATI, AOQL, AOQ, AQL, LQL,Producer’s and Consumer’s risks.
4 Six Sigma and ISO 9000:2000 : Principles of Six Sigma,Statistical basis, Tools and techniques, 8
DMAIC principle,application of six sigma in manufacturing and serviceorganizations, structure of
ISO standards, Factors leading toISO, Implementation and registration, Benefits of ISO.
5 Life Testing-Reliability :Life testing: objective, failuredata analysis, MTTF, MTBF, hazard rate, 8
exponential andWeibull models, system reliability-series, parallel and mixed
configurations, Markov model.
6 Reliability Design and Allocation : Design for reliability,reliability improvement techniques, active 6
redundancyand standby redundancy, K-out-of-N redundancy andmaintenance policies.
Total 42

1
J R Evans and W M , “Lindsay The Management and Control of Quality”, Cengage learning, India, ISBN-10:
0538452609/ISBN-13: 978-0538452601
2 KanishkaBedi,“Quality Management Oxford higher education”, Oxford University Press, 2006, ISBN
0195677951, 9780195677959
3 Besterfield, “Total Quality Management”, Pearson Education India, 2011, ISBN 8131732274, 9788131732274
4 F M Gryna, R C H Chua, J A DefeoJura,“Quality Planning and Analysis for Enterprise Quality”, Tata
McGrawHil, ISBN-10: 0072966629ISBN-13: 978-0072966626
DRAFT AE-42
1. Subject Code: AE314 Course Title:Metrology
5. Credits: 4
6. Semester: VI
9. Objective:This course aims to introduce the student with principles of measurement, types of standards, limits ,fits,
tolerances; measurement of angle, screw threads, gear measurement and testing on machines.
S. No. Contact
Contents Hours
1 Principles of measurement: Definition of Metrology, difference between precision and accuracy. Sources 8
of errors: Controllable and Random Errors, Effects of Environment and Temperature, Effects of support,
alignment errors, application of Least Square principles, errors in measurement of a quality which is
function of other variables.
Length Standards: Line standards, end standards and wavelength standards, transfer from line standards
to end standards. Numerical based on line standards. Slip gauges – its use and care, methods of building
different heights using different sets of slip gauges.
Limits, fits and tolerances: Various definitions, IS9191963, different types of fits and methods to provide
these fits. Numerical to calculate the limits, fits and tolerances as per IS 919- 1993. ISO system of limits
and fits; Gauges and its types, limit gauges – plug and ring gauges.
Gauge Design – Taylor’s Principle, wear allowance on gauges. Different methods of giving tolerances
on gauges,
2 Comparators: Characteristics, Uses, Limitation, Advantages and Disadvantages. Mechanical 8
Comparators: JohansonMikrokator and Signma Mechanical Comparator.
Mechanical - optical comparator. Electrical and electronic comparators. Pneumatic comparators –
Systems of Penumatic gauging: Flow type and back pressure type, different type of sensitivities and
overall magnification. Solex Pneumatic gauge and differential comparators.
3 Angular Measurement: Sine Bar – different types of sine bars, use of sine bars in conjuction with slip 6
gauges, precautions and calibration of sine bars. Use of angle gauges, spirit level, errors in use of sine
bars. Numericals. Principle and working of Micro-optic autocollimator. Circular Division: dividing head
and circular tables, circular division by precision Polygons. Caliper Principle, Calibration of polygons.
Numerical based on circular division. Straightness and flatness: Definition of Straightness and Flatness
error. Determination of straightness error of straight edge with the help of spirit level and auto collimator.
Determination of flatness error of a surface plate with the help of spirit level or auto collimator.
Numericals
4 Screw Thread Measurement: Errors in threads, Measurement of elements of screw threads – major 8
diameter, minor diameter, pitch, flank angle and effective diameter (Two and three wire methods). Effect
of errors in pitch and flank angles and its mathematical derivation.
5 Gear Measurement: Measurement of tooth thickness – Gear tooth vernier caliper, Constant chord 8
method, base tangent method and derivation of mathematical formulae for each method. Test plugs
method for checking pitch diameter and tooth spacing. Measurement of Gear Pitch, Parkinson Gear
Tester.
6 Machine Tool Alignment: Machine tool tests and alignment tests on lathe. Alignment tests on milling 6
machine. Alignment tests on a radial drilling machine.
Interferometry: Principle of measurement, Interferometry applied to flatness testing, surface contour
tests, optical flats, testing of parallelism of a surface with the help of optical flat. Quantitative estimate
of error in parallelism, Flatness Interferometer NPL-Gauge length interferometer for checking the error
in slip gauges. Numericals based on Interferometry.
Surface texture: Introduction, different types of irregularities, standard measures for assessment and
measurement of surface finish.
Total 42
DRAFT AE-43
1
R.K. Jain, “Engineering Metrology”, Khanna Publishers, Delhi, BN 10: 817409153X ISBN 13: 9788174091536
2 I.C. Gupta, “Engineering Metrology”, DhanpatRai Publications, Delhi, ISBN-10-8189928457
3 F.W. Galyer& C.R. Shotbolt, “Metrology for Engineers”, ELBS edition.,ISBN-10: 0304318442/ISBN-13: 978-
0304318445
4 R. Jenkins, “Fundamentals of Mechanical Inspection”, Tata, McGraw Hill,
5 C. Dotson, R. Harlow, R. Thompson, “Fundamentals of Dimensional Metrology”, Thomson Asia Pte Ltd.,
Singapore 6. A.S.T.M.E., “Handbook of Industrial Metrology”, Prentice Hall, ISBN-10: 1418020621
ISBN-13: 978-1418020620
1. Subject Code: AE316 Course Title: Advances in Welding & Casting

5. Credits: 4
6. Semester: VI
9. Objective:To familiarize the students with the advances in welding and casting technology.
S. No. Contact
Contents Hours
1 CASTING DESIGN Heat transfer between metal and mould –– Design considerations in casting – 9
Designing for directional solidification and minimum stresses - principles and design of gating and
risering
2 CASTING METALLURGY Solidification of pure metal and alloys – shrinkage in cast metals – 8
progressive and directional solidification –– Degasification of the melt-casting defects – Castability
of steel , Cast Iron, Al alloys , Babbit alloy and Cu alloy.
3 RECENT TRENDS IN CASTING AND FOUNDRY LAYOUT Shellmoulding, precision 9
investment casting, CO2 moulding, centrifugal casting, Die casting, Continuous casting, Counter
gravity low pressure casting, Squeeze casting and semisolid processes. Layout of mechanized
foundry – sand reclamation – material handling in foundry pollution control in foundry –– Computer
aided design of casting.
4 WELDING METALLURGY AND DESIGN Heat affected Zone and its characteristics – 8
Weldability of steels, cast iron, stainless steel, aluminum, Mg , Cu , Zirconium and titanium alloys –
Carbon Equivalent of Plain and alloy steels Hydrogen embrittlement – Lamellar tearing – Residual
stress – Distortion and its control . Heat transfer and solidification - Analysis of stresses in welded
structures – pre and post welding heat treatments – weld joint design – welding defects – Testing of
weldment.
5 RECENT TRENDS IN WELDING Friction welding, friction stir welding – explosive welding – 8
diffusion bonding – high frequency induction welding – ultrasonic welding – electron beam
welding – Laser beam welding –Plasma welding – Electroslag welding- narrow gap, hybrid twin
wire active TIG – Tandem MIG- modern brazing and soldering techniques – induction, dip
resistance, diffusion processes – Hot gas, wave and vapour phase soldering. Overview of
automation of welding in aerospace, nuclear, surface transport vehicles and under water welding.
Total 42
DRAFT AE-44
S. No. Name of Authors /Books / Publishers (TEXT BOOKS)
1 ASM Handbook, Vol 15, Casting, ASM International, 2004, ISBN 978-0871707116
2 ASM Handbook vol.6, welding Brazing & Soldering, ASM International, 2003, ISBN 978-0871703828
3 Parmer R.S., Welding Engineering and Technology, Khanna Publishers,2002, ISBN 9788174090287
4 Srinivasan N.K., Welding Technology, Khanna Tech Publishers, 2002, ISBN 8174091599
5 HEINE, LOPER & ROSENTHAL, Principles of Metal Casting, Tata McGraw Hill, 2001, ISBN 0070993483
6 Jain P.L., Principles of Foundry Technology,TataMcGrawHill Publishers, 2003, ISBN 0070447608
7 Howard B. Cary, Scott C. Helzer , Modern Welding Technology, Pearson Prentice Hall Pvt Ltd., 2011, ISBN
0131836919
8 J. Piotrowski, W. Randolph , Robotic welding – A guide to selection and application, Society of Manufacturing,
1987, ISBN 0872632660
10 CORNU.J. Advanced welding systems – Volumes I, II and III, Springer Publishing, 2013, ISBN 3662110512
11 LANCASTER.J.F., Metallurgy of welding , Springer Publishing, 1987, ISBN 0046690107
1. Subject Code: AE318 Course Title: Materials for Automobile Components

5. Credits: 4
6. Semester: VI
9. Objective:This course aims to introduce the students with composites used for automobile components, types of composite
material, constituents material used for composites and failure theories for composites.
S. Contact
No. Contents Hours
1 Introduction to Composites : General Introduction and Concept, Historical Development, Concept 4
of Composite Materials, Material Properties That Can Be Improved by Forming A Composite
Material& Its Engineering Potential
2 Basic Definitions and Classification of Composites : Basic Definitions, Various Types of 6
Composites, Classification Based on Matrix Material: Organic Matrix Composites Polymer Matrix
Composites (PMC), Carbon Matrix Composites Or Carbon-Carbon Composites, Metal Matrix
Composites (MMC), Ceramic Matrix Composites (CMC); Classification Based on Reinforcements:
Fiber Reinforced Composites, Fiber Reinforced Polymer (FRP) Composites, Laminar Composites,
Particulate Composites
3 Advantages of Composites Materials : Comparison With Metals, Advantages & Limitations of 2
Composites
DRAFT AE-45
4 Basic Constituents Materials in Composites: Types of Reinforcements/Fibers Role and Selection 10
Or Reinforcement Materials, Types of Fibers, Glass Fibers, Carbon Fibers, Aramid Fibers , Metal
Fibers, Alumina Fibers, Boron Fibers, Silicon Carbide Fibers, Quartz and Silica Fibers, Multiphase
Fibers, Whiskers, Flakes Etc., Mechanical Properties of Fibers. Matrix Materials : Functions of A
Matrix, Desired Properties of A Matrix, Polymer Matrix (Thermosets and Thermoplastics), Metal
Matrix, Ceramic Matrix, Carbon Matrix, Glass Matrix Etc Fibers Reinforcement Composite Materials
(1 Hour) Fiber Reinforced Polymer (FRP) Laminated Composites Lamina & Laminate Lay-Up. Ph-
Orientation Definition Behaviour of A Laminate-I: Isotropic Elasticity& Plane Stress Concept in 3-D
Linear Elastic Stress-Strain Characteristics of FRP Composites, Stress and Strain Components in 3-
D, Generalized Hooke’s Law in 3-D, Stress-Strain Relations in 3-D for Isotropic Case
.
Anisotropic/Orthotropic Elasticity Stress-Strain Relations for Isotropic and Orthotropic Cases
Torsional & Matrix Notations Concept of Cartesian Tensor, Indicial Notation and Torsional
Representations in Elasticity, Voigt’s Notations Behaviour of A Laminate-II: Mechanics of Load-
Transfer in Laminate Mechanics of Load-Transfer in A Laminate Prediction of Engineering Property
in A Laminate Laminate/Ply Stress-Strain Relations Lamina Stress-Strain A Relation in Material
Coordinates, Transformation Relations, Lamina Stress-Strain Relations in Structure Global
Coordinates Laminated Composites-I Mechanics of Plates/Kirchhoff’s Plate Theory Concept of
Laminate Laminate Strain-Displacement Relationship Based on Kirchhoff’s Hypothesis Mechanical
Behaviour of Unidirectional, Cross-Ply and Angle-Ply Structural Mechanics of Laminates Laminated
Composites-II Structural Mechanics of Laminates Laminate Stiffness -Matrices Special
Classification of Laminates Symmetric .Anti-Symmetric and Non-Symmetric Laminates Strength and
Failure Concepts Strength of Laminates Failure Mechanics of Composites Macro-Mechanical Failure
Theories Maximum Stress Theory, Maximum Strain Theory, Tsai-Hill Theory, Tsai-Wu Theory
5 Comparison of Failure Theories Design Concepts: Design Issues Typical Structural Component 10
Design Process Laminate Analysis/Design Software Composite Codes & Standards Manufacturing
Processes Processing of Composite Materials Overall Considerations, Autoclave Curing, Other
Manufacturing Processes Fiber-only Performs, Combined Fiber-Matrix Performs. Manufacturing
Techniques: Tooling and Specialty Materials, Release Agents, Peel Plies, Release Films and Fabrics,
Bleeder and Breather Plies, Bagging Films
6 Special Topics : Testing of Composites (ENGN4511) Mechanical Testing of Composites, Tensile 10
Testing, Compressive Testing, Intra-Laminar Shear Testing, InterLaminar Shear Testing, Fracture
Testing Etc Environmental Effects on Composites
Micromechanics of Laminae Engineering Applications General Engineering Applications of FRP
Composites Applications Related to Aerospace, Automobile, Bridge and Other Civil Engineering
Structures, Case Studies
Total 42

1 Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness /
Ahmed Elmarakbi / John Wiley & Sons, 2013 / 111853526X, 9781118535264
2 Mechanics of Fibrous Composites / Carl T. Herakovich / Wiley, 1997 / 0471106364, 9780471106364
1. Subject Code: AE320 Course Title:Tribology and Lubrication

5. Credits: 4
6. Semester: VI
9. Objective:This course aims to introduce student with general parameters for surface interaction, adhesive wear, friction
DRAFT AE-46
between surfaces and lubrictaions.
S. No. Contact
Contents Hours
1 Introduction: Surface interactions, science of rubbing surface, general consideration of 4
parameters involved, wear rate, modeling and solution of simple problems
2 Material properties influencing interactions: Introduction, elastic properties, Plastic 8
deformation properties, relation between the strength and other Properties of solids, chemical
reactivity of surfaces, absorbed surface layer, Surface energy, relation between surface energy
and hardness, Surface Interfacial Energies of Solids under engineering condition
3 Surface Interaction: Size of real contact area and effect of surface energy, size of junction, 8
rheologial properties, Wear in tribological joints - classification, calculation methods with
allowance for stiffness, wear limits, reliability of joints, simple examples, detailed study of
manufacturing methods for highly reliable joints. Economic role of wear, measurement, types,
and use of radiotracer techniques
4 Adhesive wear: Mechanism, size, shapes of transferred and wear particles, quantitative laws, 8
equilibrium calculation of fragments under different conditions, minimum load for loose particle
formation, Quantitative expression for abrasive wear, of hardness and particle size on abrasive
wear rate, surface fatigue wear, brittle fracture wear, corrosive wear with types
5 Friction: Introduction, laws, function, properties of uncontaminated metals in air, outgassed 6
metal surface, calculation of flash temperature using surface energy, stickslip and its prevention
6 Lubrication: Solid film lubrication, boundary lubrication with single and multiple penetration 8
models, properties of lubricants, effectiveness of lubrication-intermediate temperature, behavior
of a solid lubrication below melting point effect of speed, load on lubrication. Lubricants, their
properties lubrication technique in vacuum, lubricant coating and its stability. Theory of
elastohydrodynamic lubrication film thickness, frictional stress heat flow & temperature, service
life of roller bearings
Total 42
1 Gwidon, Stachowiak, Engineering Tribology 2005 Edition, Publisher-Elsevier (ISBN -13:
9780123970473)
2 GwidonStachowiak;Experimental Methods in Tribology Publisher-Elsevier (ISBN -13: 9780444515896)
3 John Williams,Engineering Tribology OUP Publisher: Cambridge University Press ( ISBN-
13: 9780521609883)
1. Subject Code: AE322 Course Title:Reliability& Maintenance Engineering

5. Credits: 4
6. Semester: VI
9. Objective:This course is designed to introduce the student with mathematics of reliability, system reliability assessment,
availability and maintainability.
S. No. Contact
Contents Hours
DRAFT AE-47
1 Introduction and Reliability Mathematics : Relevance of reliability, availability and 4
maintainability, definition of reliability, factors influencing system effectiveness, laws of
probability, probability distributions; exponential Weibull normal, log normal, data collection
recovery of data, Statistical analysis of failure data
2 Fundamentals Of Reliability : Various reliability related functions; probability density 8
function, cumulative distribution function, reliability function and hazard rate; reliability
models; constant rate, Weibull, normal and lognormal model
3 System Reliability Assessment : Types of systems- series, parallel, series-parallel, parallel- 8
series, stand by and complex; method of reliability evaluation; cut set and tie set methods,
event trees and fault trees methods, markov method, Reliability of repairable systems
4 Reliability Improvements : Methods of reliability improvements,; low level and high level 8
redundancy, active , stand by and K-out-of-N redundancy, effect of maintenance
5 Availability and Maintainability Assessments : Point, mission and steady state availability. 6
Availability assessment, Maintainability and its assessment. Maintenance policies
6 Design for Reliability : Reliability allocation, Design for reliability and maintainability, 8
optimization of reliability and maintainability and their trade-off, Practical applications of
RAM Engineering to systems, products and processes., Monte Carlo simulation
Total 42

1 Ebeling CharlesE.,”An introduction to Reliability and Maintainability Engineering”,Publisher: Tata
McGraw-Hill Publishing Co. Ltd.,New Delhi(ISBN-13: 9780070188525),1996
2 Srinath,L.S.” Reliability Engineering”,PUBLISHER :Affiliated East – West Press Ltd., New Delhi(ISBN:
978-81-317-2121-6),1991
3 Dhillon,B.S.,”Engineering Maintainbility”,PUBLISHER: Prentice Hall of India, New Delhi(ISBN:
9780080505688),1991
4 Blanchard, Benjamin,S.,”Logistics Engineering and Management”, PUBLISHER:Prentice Hall of India,
New Delhi(ISBN: 9780131246997),2004
1. Subject Code: AE324 Course Title: Elastic & Plastic Behavior of Material
5. Credits: 4
6. Semester: VI
9. Objective:To introduce the student with mechanical testing, behaviour of material beyond elastic limit, creep and fatigue.
S. No. Contact
Contents Hours
1 Mechanical Testing: Study of stress strain diagrams of various materials 4
2 tension, compression, shear and ductile tests, bend test and Erichsoncuppling tests on 8
Rockwell, Brinell, Vickers hardness tests; micro hardness, superficial and shore’s
schleroscope tests
3 Material Behavior Beyond Elastic Limit: Inelastic action, yielding in crystals, dislocations, 8
yielding in polycrystals and amorphous material, UNIIT III Strain hardening and
discontinuous yielding.
4 Fracture: Study of ductile and Brittle fracture; Ductile - Brittle transition, notch effect and 6
notch sensitivity and methods of protection against fracture
5 Creep: Long- time constant load, Constant-temperature creep tests, mechanism of creep 8
rupture, graphical representation of long time creep test data, empirical relation for creep
DRAFT AE-48
behavior, plastic flow rules for creep, creep relaxation in tension
6 Fatigue: The nature of fatigue, mechanism of fatigue, fatigue strength of metals, stress 8
concentration, fatigue strength, fatigue failure under combined stress, cumulative fatigue
damage due to varying amplitude of stress, other factors affecting fatigue strength
Total 42

S.no. Name of author/book/publisher
1. W A Nash “strength of materials”, The McGraw-Hill Companies (ISBN- 9780070843660)
2. R.K.BANSAL, “strength of materials”, Laxmi publication, 2010 (ISBN-9788131808146)
3. SADHU SINGH, “strength of materials”, Khanna Publishers. Publication Year: 2009. ISBN-13:
9788174090485
4. W. JHONES, “impact strength of material”, Edward Arnold ISBN-13: 978-0713132663
1. Subject Code: AE326 Course Title: Production Planning & Inventory Control
5. Credits: 4
6. Semester: VI
9. Objective:To familiarize the students with the production planning and inventory control system.
S. No. Contact
Contents Hours
1 INTRODUCTIONObjectives and benefits of planning and control-Functions of production 8
control-Types ofproduction-job- batch and continuous-Product development and design-
Marketingaspect - Functional aspects-Operational aspect-Durability and dependability
aspectaestheticaspect. Profit consideration-Standardization, Simplification & specialization-
Break even analysis-Economics of a new design
2 WORK STUDYMethod study, basic procedure-Selection-Recording of process - Critical 8
analysis,Development - Implementation - Micro motion and memo motion study –
workmeasurement - Techniques of work measurement - Time study - Production study -Work
sampling - Synthesis from standard data - Predetermined motion time standards
3 PRODUCT PLANNING AND PROCESS PLANNINGProduct planning-Extending the 8
original product information-Value analysis-Problems inlack of product planning-Process
planning and routing-Pre requisite information neededfor process planning-Steps in process
planning-Quantity determination in batchproduction-Machine capacity, balancing-Analysis of
process capabilities in a multiproduct system
4 PRODUCTION SCHEDULINGProduction Control Systems-Loading and scheduling- 8
Master Scheduling-Schedulingrules-Gantt charts-Perpetual loading-Basic scheduling
problems - Line of balance – Flowproduction scheduling-Batch production scheduling-
Product sequencing - Production
Control systems-Periodic batch control-Material requirement planning kanban –Dispatching-
Progress reporting and expediting-Manufacturing lead time-Techniques foraligning
completion times and due dates
5 INVENTORY CONTROL AND RECENT TRENDS IN PPCInventory control-Purpose of 10
holding stock-Effect of demand on inventories-Orderingprocedures. Two bin system -
Ordering cycle system-Determination of Economic orderquantity and economic lot size-ABC
analysis-Recorder procedure-Introduction tocomputer integrated production planning
systems-elements of JUST IN TIME
DRAFT AE-49
SYSTEMS-Fundamentals of MRP II and ERP
Total 42
1 MartandTelsang ,“Industrial Engineering and Production Management”, Publisher- S.Chandand Company,
First edition, 2000 (ISBN 8121917735)
2 James.B.Dilworth,”Operations management – Design, Planning and Control formanufacturing and
services” Mcgraw Hill International edition1992
3 Samson Eilon , “Elements of production planning and control”, , Publisher- Universal BookCorpn.1984
(ISBN 13: 9780023318009)
4 Elwood S.Buffa, and Rakesh K.Sarin, “Modern Production / OperationsManagement”, Publisher 8th Ed.
John Wiley and Sons, 2000 (ISBN 13: 9780471056720)
5 Melynk, Denzler,“ Operations management – A value driven approach” Publisher- IrwinMcgrawhill (ISBN
-13: 9780256123814)
1.Subject Code: AE411 Course Title: Vehicle Maintenance &Tribology

5. Credits: 4
6. Semester: VII
9. Objective:To familiarize the students with the engine maintenance parameters, schedules, chasis maintenance of electrical
systems, cooling systems, lubrication system.
S. Contact
No. Contents Hours
1 Introduction : nature of surfaces and contact, surface topography, friction and wear mechanisms 6
and effect of lubricants, methods of fluid film formation. Lubrication Choice of lubricant type,
oil, grease and solid lubricants, additives, lubrication systems and their selection, selection of
pump, filters, piping design, oil changing and oil conservation. Failure of tribological components
filure analysis of plain bearings, rolling bearings, gears and seals, wear analysis using SOAP and
Ferrography
2 Maintenance of records and schedules : Importance of maintenance, preventive (scheduled) 6
and breakdown (unscheduled) Maintenance, requirements of maintenance, preparation of check
lists. Inspection Schedule, maintenance of records, log sheets and other forms, safety precautions
in Maintenance
3 Engine maintenance – repair and overhauling Dismantling of engine components and cleaning, 8
cleaning methods, visual and Dimensional inspections, minor and major reconditioning of various
components, Reconditioning methods, engine assembly, special tools used for maintenance
Overhauling, engine tune up. Performance evaluation for maintenance
4 Chassis maintenance - repair and overhauling : Mechanical and automobile clutch and gear 8
box, servicing and maintenance, Maintenance servicing of propeller shaft and differential system.
Maintenance &servicing of suspension systems. Brake systems, types and servicing techniques.
Steering Systems, overhauling and maintenance. Wheel alignment, computerized alignment and
Wheel balancing
5 Maintenance of automotive electrical system servicing and repairs :Testing methods for 8
checking electrical components, checking battery, starter motor, Charging systems, dc generator
and alternator, ignitions system, lighting systems. Fault Diagnosis and maintenance of modern
electronic controls, checking and servicing of Dash board instruments
6 Maintenance of fuel system, cooling systems, lubrication system and vehicle Body : Servicing 6
and maintenance of fuel system of different types of vehicles, calibration and Tuning of engine
for optimum fuel supply. Cooling systems, water pump, radiator, Thermostat, anticorrosion and
antifreeze additives. Lubrication maintenance, lubricating Oil changing, greasing of parts. Vehicle
DRAFT AE-50
body maintenance, minor and major repairs. Door locks and window glass actuating system
maintenance
Total 42
1 John Doke “Fleet Management”, McGraw-Hill Co. 1984
2 Fraze,prving “ Automotive Maintenance & Troubleshooting”. Mir Publishers, Moscow1976
3 Fundamentals of Tribology -S. K. Basu, S.N. Seengupta& B.B. Ahuja- PHI 4. Engineering Tribology -
PrasantaSahoo -PHI
4 James D Halderman ,” Advanced Engine Performance Diagnosis”,Publisher: Prentice Hall ( ISBN-13:
9780130929846 ),1998
5 Service Manuals from Different Vehicle Manufacturers
6 Neale M J “Tribology Handbook" publisher: Butterworth-Heinemann ( ISBN-13: 9780750611985), 1975
7 J J O' Connor & Boyd ASLE, “Standard handbook of lubrication engineers”, publisher- McGraw Hill
Book Co.( ISBN-13: 9780070476059),1968
1. Subject Code: AE413 Course Title: Vehicle Transport Management

5. Credits: 4
6. Semester: VII
9. Objective:To familiarize the students with concept of vehicle transport management. To familiarize him with understanding
about vehicle transport management.
S. Contact
No. Contents Hours
1 INTRODUCTION :Personnel management; objectives and functions of personnel management, 8
psychology, sociology and their relevance to organization, personality problems. Selection process:
job description, employment tests, interviewing, introduction to training objectives, advantages,
methods of training, training procedure, psychological tests
2 TRANSPORT SYSTEMS :Introduction to various transport systems. Advantages of motor 8
transport. Principal function of administrative, traffic, secretarial and engineering divisions. chain
of responsibility, forms of ownership by state, municipality, public body and private undertakings
3 SCHEDULING AND FARE STRUCTURE :Principal features of operating costs for transport 10
vehicles with examples of estimating the costs. Fare structure and method of drawing up of a fare
table. Various types of fare collecting methods. Basic factors of bus scheduling. Problems on bus
scheduling
4 MOTOR VEHICLE ACT :Traffic signs, fitness certificate, registration requirements, permit 8
insurance, constructional regulations, description of vehicle-tankers, tippers, delivery vans, recovery
vans, Power wagons and fire fighting vehicles. Spread over, running time, test for competence to
drive
5 MAINTENANCE :Preventive maintenance system in transport industry, tyre maintenance 8
procedures. Causes for uneven tyre wear; remedies, maintenance procedure for better fuel economy,
Design of bus depot layout
Total 42

1 John Duke ,”Fleet Management”,–Publisher- McGraw-Hill Co, USA (ISBN -13: 978-0070174108), 1984
DRAFT AE-51
2 Kitchin.L.D ,”Bus Operation”., Publisher - Illiffee and Sons Co., London, III edition(ISBN:
B0007JG0US), 1992
3 Government Motor Vehicle Act –Publication on latest act to be used as on date
1. Subject Code: AE415 Course Title: Power Plant Engineering

5. Credits: 4
6. Semester: VII
9. Objective:To familiarize the students with types of power plants, steam generators, combined cycle power plants, other
power plants, control of power plants and environmental impact of power plants.
S. Contact
No. Contents Hours
1 Classification of power plants: base load and Peak load power stations, co-generated power plant, 6
captive power plant, and their fields of application & selection criteria, Indian energy scenario,
Indian coals: formation, properties, analysis, benefication and heating value calculation of coals;
cocking and non-cocking coals, fuel handling systems; coal gasification
2 Steam Generators: High pressure utility boiler, natural and forced circulation, fuel handling, coking 8
and non-coking coal, coal benefication, coal pulverization, pulverized fuel firing system, combustion
process, need of excess air, cyclone furnace, fluidized bed boiler, placement of evaporator,
economizers, super heaters, re-heaters, air pre-heater in the boiler, de-aeration, boiler blow- down,
ash collection by bag house, gravity separation, electrostatic precipitators and wet scrubbers, boiler
efficiency calculations, water treatment: external and internal treatment
3 Combined Cycle Power Plants: Binary vapour cycles, coupled cycles, gas turbine- steam turbine 6
power plant, gas pipe line control, MHD- Steam power plant, thermionic steam power plant,
integrated coal combined cycle (IGCC) power plant
4 Other power plants : Nuclear power plants - working and types of nuclear reactors, boiling water 8
reactor, pressurized water reactor, fast breeder reactor, controls in nuclear power plants, hydro power
plant -classification and working of hydroelectric power plants, diesel and tidal power plants
5 Instrumentation and Controls in power plants: Important instruments used for temperature, flow, 8
pressure, water/ steam conductivity measurement; flue gas analysis, drum level control, combustion
control, super heater and re-heater temperature control, furnace safeguard and supervisory system
(FSSS), auto turbine run-up system(ATRS), interlocks and protection of boiler turbines
6 Environment Pollution and Energy conservation: Economics of power generation: load duration 6
curves, power plant economics, pollution from power plants, disposal/ management of nuclear power
plant waste. concept of energy conservation and energy auditing
Total 42
1 M.M. El Wakil, “Power Plant Engineering”, Publisher-Tata McGraw Hill (ISBN 13: 9780072871029)
2 P.K Nag , “Power Plant Engineering”, Publisher-Tata McGraw Hill( ISBN-13: 9789339204044)
3 by J Wiesman and R Eckart, “Modern Power Plant Engineering”, Publisher-Prentice hall India Ltd (ISBN
9780135972526)
4 T.D Eastop and McConkey .“Applied Thermodynamics”, Longman Scientific and Technical Publisher-
Pearson (ISBN 8177582380)
5 F.S Aschner “Planning Fundamentals of thermal Power Plants”, Publisher-John Wiley (ISBN
9780470993569)
DRAFT AE-52
1. Subject Code: AE417Course Title: Robotics &Automation(DEC-5)
5. Credits: 4
6. Semester: VII
9. Objective:To introduce the student with types of robotics, fundamentals of robotics, languages used to program robots,
sensing system for a robot and safety of robots.
S. No. Contact
Contents Hours
1 Introduction to Robotics, Classification of Robots, Characteristics of Robots, performance, 6
advantages and disadvantages of a Robot, industrial applications of a Robot
2 Fundamentals of a Robot: Various system, structure and definition, terms relating to 6
industrial Robots, basic terms related to Robot performance and Characteristics, Control
volume of a Robot
3 Robot languages and programing 8
4 Controlling the Robot systems: Introduction to drives, Mechanical, Hydraulic, Pneumatic, 8
electric drives, feed back control
5 Sensing system for a robot: Introduction, types of sensors, machine vision, Artificial 8
intelligence, Control techniques
6 Robot safety: Introduction, potential safety hazards, safety planning check lists, safety 6
guidelines, latest development in safety measurement
Total 42

1 John j Craig, “Introduction to Robotics: Mechanics and Control”, Publisher-Pearson
education(ISBN 9780201543612)
2 Y.Koren “Robotics for Engineers”, Publisher-McGraw Hill Publications(ISBN 9780070353992)
DRAFT AE-53
1. Subject Code: AE419 Course Title: Nuclear Energy
5. Credits: 4
6. Semester: VII
9. Objective:To familiarize the students with the nuclear physics, nuclear energy, principles of nuclear reactors, types of
reactors, heat transfer involved in reactors and waste management of radiative material
S. No. Contact
Contents Hours
1 Nuclear Physics: Atomic number and mass numbers, Isotopes, Nuclear energy and nuclear 6
forces, Binding Energy, Nuclear Stability, Radioactivity, Nuclear reactions, Radioactive
isotopes, Law of radioactivity, Interaction of radiation (alpha,beta, gamma) with matter,
Interaction of neutrons with matter, Absorption radiative capture, Transmutation Fission,
Cross section for nuclear reactions. Fission process, Mechanism of nuclear fission, fission
cross section, fission products, Basic radio chemistry
2 Reactor Physics: Neutron balance, Neutron diffusion, Diffusion equation, and its solution, 8
Showing down of neutrons, Showing down power and moderating ratio. Reactor theory:
Multiplication factors, Four factor formula, One group critical equation, Age, Diffusion
method, Nonleakage probabilities and effective multiplication factor, Multi group diffusion
theory, Homogeneous and heterogeneous reactor systems, Time dependent reactor behaviour
3 Nuclear Reactor Engineering: Types of rectors, Ordinary water moderated reactors (BWR, 8
PWRO), Heavy water cooled and moderated reactors, Gas cooled reactors (HTGR, AGR),
Fast reactors design, Construction and control of nuclear reactors
4 Heat transfer in nuclear reactors: Heat transfer techniques in nuclear reactors, Design and 6
operation, Thermal stresses, Reactor shielding
5 Reactor materials: Nuclear fuels, Moderators, Coolants, Reflectors and structural materials. 6
Reprocessing: Nuclear fuel cycle, Spent fuel characteristics, Reprocessing techniques role of
solvent extraction in reprocessing
6 Waste management and radiation protection: Types of waste, Waste management 8
philosophy and disposal, ICRP recommendations, Radiation hazards and their prevention,
Radiation dose units. Status of nuclear technology in India: Indian nuclear power program,
Nuclear reactors in India, India’s commitment to nuclear
Total 42

1 S. Glasstone and A. Seronske, Van Nostrand – Reinhold , “Nuclear Reactor Engineering”, Publisher-
Technical Information Center, United States Atomic Energy Commission(ISBN 9780870790096), 1967
2 M. Bendict and T.A. Pigtor ,”Nuclear Chemical Engineering”, Publisher- McGraw Hill, 1981(ISBN:
0070045313)
3 L. C. MerriteBasic Principles of Nuclear Science and Reactors, Publisher-Wiley Hill, 1981
4 S. E. Liverhandt, Introduction to Nuclear Reactor Physics (ISBN -13: 9781124145884)
1. Subject Code: AE-404 Course Title: Computer Integrated Manufacturing Systems(DEC- 6,7,8 )
DRAFT AE-54
5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with CIMS, Part Programming, Tooling and Fixture, Work piece Handling etc.
S. No. Contact
Contents Hours
1 Introduction : Fundamental Concepts in Manufacturing andAutomation- Need for 8
Automation - Automation Strategies- Economic Analysis and Production - Fundamental of
CIMS
2 Computer Aided Design (CAD) : Elements of CAD System- Graphics Hardware - ALU- 8
CPU - Input/Output Devices -Geometric Modeling - Automated Drafting
3 Manufacturing Systems : Basics of Numerical Control – Typesof NC Systems - CNC and 8
DNC Machines - Matching Centre– Tool Magazine - NC Tape Format - Programming –
ManualPartProgramme - Simple Programmes - Computer Assisted Part Programming - APT
Language - Simple Examples
4 Flexible Manufacturing Systems : Group Technology -Part Families - Part Classification 8
and Cooling – ProductionFlow Analysis - Machine Cell Design - Description of FMS -
Equipment, Tooling and Fixture
5 Computer Aided Manufacturing : Computers inManufacturing - Automated Manufacturing 10
Systems -Workpiece Handling - Types of Transfer - Continuous,Intermittent and Non-
Synchronous Walking Beam -Computer Aided Process Planning – Computer AidedInspection
- Computer Aided Quality Control - Basic Modeloff CIMS- Interfacing Methods of CAD And
CAM – ComputerProcess Monitoring
Total 42
1 Automation, Production Systems, and Computer-Integrated Manufacturing/Mikell P. Groover/Pearson
Education, 2015/0133499715, 9780133499711
2 CAD/CAM: Computer-Aided Design and Manufacturing/Groover/Pearson Education India,
1984/8177584162, 9788177584165
3 Niebel, " Modem Manufacturing Process ", Mcgraw-Hill, 1989
4 Numerical Control of Machine Tools/Stanley John Martin/English Universities Press, 1970/0340114576,
9780340114575
5 Computer Integrated Manufacturing: From Fundamentals to Implementation/Alan
Weatherall/Butterworth-Heinemann, 2013 / 1483163415, 9781483163413
1. Subject Code: AE406 Course Title: Total Life Cycle Management

5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with the concept of Total Life Cycle, management of old vehicles, applying life cycle
thinking to define tradeoffs. This course also introduces to sustainability, use of renewable resources.
S. No. Contact Hours
Contents
1 Introduction : Definition of Total Life Cycle (TLC) – Conceptof TLC - Life Cycle 8
Impacts - Integrating Life Cycle Technologies- Products and Processes Within TLC
- TLC Methodology- TLC Accessement Data to Complex Products –
DRAFT AE-55
ResultantImprovement for Product
2 Vehicles End of Life : Design for End of Old VehicleManagement - Problems of 8

Old Vehicles in EmergingMarkets - Recovery and Economic Feasibility of
MaterialsSuch As Plastic, Rubber, Aluminium, Steel, Etc
3 Tradeoffs : Applying Life Cycle Thinking to Define TradeoffsAlong the Supply, 10
Manufacture - Use and End of Life Chain- Effects on the Customer - Expectation
of the Customer -Evaluate Product Cost on Fuel Consumption,
Emission,Durability, Environment and Health
4 Sustainability :What Is Sustainability - Use of RenewableResources - View to 8
Design Horizon.
5 Harmonization of Environmental Goals : Tlc for Emerging Vs Developed 8
Markets - Rules and Regulations to Guide Designers - International Common
Practices for End of LifeVehicles
Total 42
1 Life Cycle Management Case Study of an Instrument Panel /SAE, 1997/
2 Accident Reconstruction: Automobiles, Tractor-semitrailers, Motorcycles, and Pedestrians /Society of
Automotive Engineers, 1987 /0898834546, 9780898834543
1. Subject Code: AE408 Course Title: Refrigeration & Automobile Air Conditioning
5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with the basic concepts of Refrigeration and Air conditioning principles of designing
and maintenance of air-conditioning system.
S. Contact
No. Contents Hours
1 Refrigeration 10
Refrigeration, ton of Refrigeration, Various Methods of Producing Refrigeration, Applications,
Heat Pump, Reversed Carnot Cycle and Its Limitations, Vapour Compression Cycle,
Subcooling, Superheating, Liquid Vapour Heat Exchanger, Effect of Changes in Evaporator
Condenser Temperatures, Deviations From Ideal Cycle. Refrigerants and Their Properties,
Alternative Refrigerants
2 AIRCONDITIONING FUNDAMENTALS 10
Basic air conditioning system - location of air conditioning components in a car, schematic
layout of a refrigeration system, compressor components, condenser and high pressure service
ports, thermostatic expansion valve, expansion valve calibration, controlling evaporator
temperature, evaporator pressure regulator, evaporator temperature regulator
3 AIR CONDITIONER – HEATING SYSTEM 7
Automotive heaters, manually controlled air conditioner, heater system, automatically
controlled air conditioner and heater systems, automatic temperature control, air conditioning
protection, engine protection
4 AIR ROUTING AND TEMPERATURE CONTROL 7
Objectives, evaporator airflow through the recirculation unit, automatic temperature control,
duct system, controlling flow, vacuum reserve, testing the air control and handling systems
5 AIR CONDITIONING SERVICE 8
Air conditioner maintenance and service, servicing heater system removing and replacing
components, trouble shooting of air controlling system, compressor service
DRAFT AE-56
Total 42
1 William H. Crouse and Donald I. Anglin - “Automotive Air conditioning” – McGraw Hill Inc. – 1990,
ISBN: 9780070148574
2 Boyce H.D Wiggins -”Automotive Air Conditioning” - Delmar – 2002, ISBN:10:0827319428/ISBN:
13:9780827319424
3 Mitchell information Services, Inc - “Mitchell Automatic Heating and Air Conditioning Systems” -
Prentice Hall Ind. – 1989, ISBN: 13:978-0135862230, 10:013586223X
4 Paul Weiser - “Automotive Air Conditioning” - Reston Publishing Co., Inc., - 1990, ISBN: 978-
0835902618
5 MacDonald, K.I., - “Automotive Air Conditioning” - Theodore Audel series – 1978,ISBN: 0672233185
9870672233180
6 Goings.L.F. – “Automotive Air Conditioning” - American Technical services -1974, ISBN: 978-
0826902108
1. Subject Code: AE410 Course Title: Fuel Cells

5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with the concepts and analysis of fuel cells.Tofamiliarize the student about
conventional and latest trends in this area.
S. No. Contact
Contents Hours
1 Introduction and Thermodynamics : Introduction: Basic Operating Principles – Historical 6
Highlights – Classification.
Thermodynamics:
Electrochemical Energy Conversion – Theoretical Efficiency – Electrochemical Energy
Conversion – Factors Affecting Electrochemical Energy Conversion
2 Electrode Kinetics : Electrode Double Layer – ElectrolyteDouble Layer – Double Layer 8
Models (Helmoltz Model, Gouy-Chapman Model, Stern Model, Grahame Model –
Bockris,Devenathan and Muller Model, and Chemical Models)– Solid Metallic Electrode –
Semiconductor Electrode –Specific Adsorption – Zero Potential
3 Alkaline Fuel Cells & Phosphoric Acid Fuel Cells : Alkaline Fuel Cells: Working Principle 8
– Components – Modules andStacks – Performance Characteristics (Power Density,
SpaceApplications, Atmospheric Pressure Cells) – Limitations and R&D Challenges – System
Issues – Ammonia As Fuel. Phosphoric Acid Fuel Cells: Cell Reactions – Electrodes (Stability
of Catalysts, Electrode Fabrication – Fuel Cell Performance) – Stacks and Systems
4 Solid Oxide Fuel Cells & Molten Carbonate Fuel Cells : Solid Oxide Fuel Cell: Principle 10
of Operation – Benefitsand Limitations – Cell Components (Electrolytes, ZirconiaSystems,
Ceria Based Electrolytes, Perovskite-Based Systems)– Cathode Materials – Anode Materials
Interconnects –Fuel Reactions –Configurations and Performance (Tubular,Monolithic, Planar)
– Environmental Impact –Applications.Molten Carbonate Fuel Cell: General Principle –
Components(Electrolyte and Matrix, Cathode and Anode Materials) –Electrode Reactions –
Life Time
5 Direct Methanol Fuel Cells & Proton Exchange Membrane Fuel Cells : Direct Methanol 10
Fuel Cells: Operating Principle– Noble Metal Issue – Electro-Oxidation of
Methanol(Catalysts, Oxygen Electro-Reduction, Electrolyte, Non-Catalytic Aspects) -
DRAFT AE-57
Methanol Crossover – CatalystOptimization – Vapour Feed Versus Liquid Feed Cells.Proton
Exchange Membrane Fuel Cells: Operating Principle
(Membranes, Electrodes and Electrolysis, Optimization of Membrane and Electrode
Assembly Impurities) – Technology Development (Single Cell and Stacks, Composite Plates)
– Fuel Processing – Modeling Studies (Membrane, Electrode, Membrane-Electrode Assembly,
Fuel Cell, Stack and System) – Technology Development and Applications
Total 42
1 Viswanathan, B. and AuliceScibioh, M., Fuel Cells Principles and Applications, Universities Press (India)
Pvt. Ltd., Hyderabad, 2006, ISBN:97814200602871420060287
2 Hoogers, G., Edr., Fuel Cell Technology Handbook, Crc Press, Washington D. C., 2003,
ISBN:9780849308772
1. Subject Code: AE412 Course Title: Modern Vehicle Technology

5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with modern vehicles, trends in power plants, new techniques of reduction of noise
and pollution; vehicle automated tracks.
Contents
1 Trends in Power Plants : Hybrid Vehicles - Stratified Charged/ Learn Burn 6
Engines - Hydrogen Engines - Battery Vehicles– Electric Propulsion With Cables
- Magnetic Track Vehicles
2 Suspension Brakes and Safety : Air Suspension – ClosedLoop Suspension - 8
Antiskid Braking System, Retarders,Regenerative Braking Safety Cage - Air Bags
- Crash Resistance- Passenger Comfort
3 Noise and Pollution : Reduction of Noise - Internal & External Pollution 8
ControlThrough Alternate Fuels/Power Plants – Catalytic Convertersand Filters for
Particulate Emission
4 Vehicle Operation and Control : Computer Control forPollution and Noise 10
Control and for Fuel Economy -Transducers and Actuators - Information
Technology forReceiving Proper Information and Operation of the VehicleLike
Optimum Speed and Direction
5 Vehicle Automated Tracks : Preparation and Maintenanceof Proper Road 10
Network - National Highway Network WithAutomated Roads and Vehicles -
Satellite Control of VehicleOperation for Safe and Fast Travel
Total 42

1 Noise and vibration control engineering: principles and applications / István L. Vér, Leo Leroy Beranek /
John Wiley & Sons, 2006/ / 0471449423, 9780471449423
2 Automotive handbook / Robert Bosch, Robert Bosch GmbH./ SAE, 1993/ 0837603307, 9780837603308
DRAFT AE-58
1. Subject Code: AE414Course Title: Automobiles Vibration System Analysis
5. Credits: 4
6. Semester: VIII
9. Objective:This course aims to introduce the student with fundamentals of vibrations, multi-degree of freedom systems,
dynamic analysis and frequency analysis.
S. No. Contact
Contents Hours
1 Introduction: Simple Harmonic Motion, Terminology,Newton’s Law, D’alembert’sPrinicple, 6
Resonance,Introduction to Mechanism of Damping. Damped andUndamped Oscillations.
Degrees of Freedom. VariousMechanisms of Damping. Equivalent Viscous Damping
2 Single Degree of Freedom Systems: Free Vibrations, FreeDamped Vibrations, Forced 8
Vibrations With and WithoutDamping. Support Excitation and Vibration
MeasuringInstruments. Amplitude and Phase Response Diagrams.Generalized Single Degree
of Freedom Systems forContinuous Structures and Computation of K, M and C.
3 Multi Degree of Freedom Systems: Two / Three Degree ofFreedom Systems, Static and 8
Dynamic Coupling, VibrationAbsorbers, Principal Coordinates, Principal
Modes,Othogonality Conditions Hamilton’s Principle, Lagrange’sEquation and Application.
Longintudinal Vibration, LateralVibration, Torsional Vibration of Shafts, Dynamical
Equationsof Equilibrium of Elastic Bodies, Natural FrequenciesandModeshapes
Determination
4 Frequency Analysis: Methods Determining NaturalFrequencies and Mode Shape. Natural 10
Vibrations of SolidContinua. Determination of Eigen Values and Eigen Modes.Introduction to
Approximate Methods for FrequencyAnalysis Rayleigh Ritz Method
forVibrationAnalysis.Diagonalization of Stiffness, Mass and Damping MatricesUsing
Orthogonality Conditions
5 Dynamic Analysis: Matrices for Dynamic Analysis.Kinematically Consistent Load Systems 10
and Determination of[K], [M], [C] and[L] Matrices. Normalization and Formulationof Modal
Equations.
Steady State Analysis: Steady State Response, Using Fourier Analysis for Decomposing
Complex Periodic Load Functions, of Modal Equations Using S-Plane Representation.
Transient Response Analysis of Modal Equations Using Duhamel’s Integrals
Total 42
1 Theory of vibration with applications / William Tyrrell Thomson / Prentice-Hall, 1972 /0139145494,
9780139145490
2 Mechanical Vibrations /Nem Chand, 2009 / 8185240566, 9788185240565
3 Introductory Course on Theory and Practice of Mechanical Vibrations / J. S. Rao, Dr. K. Gupta / Wiley
Eastern, 1984 / 0852267835, 9780852267837
4 Mechanical Vibrations / Rao /Pearson Education India, 2003 /
8177588745, 9788177588743
1. Subject Code: AE416 Course Title: Renewable Sources of Energy

5. Credits: 4
6. Semester: VIII
DRAFT AE-59
9. Objective:To familiarize the students with renewable energies used for automobiles, types of biofuels, alcohol fuels and
automotive applications of these sources.
S. No. Contact
Contents Hours
1 Solar Energy : Conversion of Solar Energy to Electrical Energy- Availability - Advantages 6
and Limitations – Power Systems
2 Wind Energy : Wind Mapping - Location of Wind Generators- Types of Wind Mills and 6
Generators - Induction andSynchronous Systems
3 Bio-fuels :Sources of Bio-Mass Energy - Wood andAgricultural Waste - Municipal Waste - 10
Animal Waste – EnergyConversion Systems - Biogas Generation From Animal Waste- Wood
Gasification - Downdraft and Fluidised Bed Systems- Alcohol Fuels. Properties as engine fuel,
alcohols blendingwith diesel and gasoline, their performance and emissionscharacteristics,
DME, DEE properties and performance and
emissions characteristics.
Vegetable Oils : Conversion of vegetable oils as biodiesel –production techniques - standards
and properties - performance and Emission characteristics, additives
4 Alcohol Fuels : Properties as engine fuels - performance inSI engines - blending with gasoline 8
- Reformed alcohols –Use in CI engines - emulsions - dual fuel systems –sparkassisted diesel
engines - combustion and emissioncharacteristics
5 Other Sources :Wave Energy - Scope and Simple Systems forPower Generation - Tidal Power 6
- Scope and Applications.Otec Scope Fundamental Principles and Operating Systemsfor
Power Generation. Geo Thermal Energy - Principle andSimple Systems for Power Generation
6 Automotive Applications : Electric Car Operation WithEnergy Stored in Battery – Energy 6
Converted to HydrogenEngine Operation – Hydrogen Conversion and StorageSystem -
Relative Merits - Direct Operation of Vehicle byBiomass Fuels Like Wood Chips, Rice Husk
and Alcohol
Total 42

1 F.S.Seiler., " Alternate Energy Vehicle Information ", Publisher - Wind Book Inc (ISBN-13:
9780880160902),1997
2 Godfrey Boyle, “Renewable Energy”, Publisher - Oxford University Press (ISBN-13:
9780199545339),2012
3 T.NejatVeziroyqlu., " Alternative Energy Sources - III "Publisher - Hemisphere Publishing Co (ISBN-
13: 9780891163350) , 1983
1. Subject Code: AE418 Course Title: Supply Chain Management

5. Credits: 4
6. Semester: VIII
9. Objective:The main objective of supply chain management are to improve the overall organization performance and
customer satisfaction by improving products or service delivery to customer. Supply chain management consists of all parties
such as supplier, manufacturer, distributor, retailers, customers directly or indirectly involved in fulfilment of customers’
demands.
DRAFT AE-60
Contents
1 Introduction : Perspective of Supply Chain Management,Managing uncertainty, 6
Key issue in supply chainmanagement
2 Inventory Management and Risk Pooling : Inventorymanagement, 6
Classification of inventory, Centralized versusDecentralized Warehousing and Risk
pooling, Value ofInformation, Quantification of Bullwhip effect, Causes
andremedies of Bullwhip effect
3 Resource planning : Aggregate Production Planning – Chaseand leveling 10
strategies, MRP, MRP-II, Agile manufacturingSystems
4 Procurement and Outsourcing strategies : Introduction,outsourcing benefits and 8
risks, Make/Buy decision,e-procurement, Vendor selection and quota allocation
5 Strategic Alliances : Introduction, Third party logistics,Demand driven strategies, 6

Distribution strategies directshipment, cross docking, transshipment,
Supplierrelationships management, Customer relationship management
6 International Issues in Supply Chain Management Concepts in Globalization, 6
Globalization forces, Risksand Advantages of International supply chains, Issuesin
International supply chain management, Regionaldifferences in logistics
Total 42

1 Designing and Managing the Supply Chain: concepts, strategic and case studies by David Simchi-Levi,
Philip kaminsky, Edith Simchi-Levi, Ravi Shankar, Tata McGraw- Hill, ISBN: 978-0070666986
2 Supply Chain Management by Chopra and Mendle, PHI, ISBN:-13:978-0132743952
3 Supply Chain Management: Text and Cases by JannatSah, Pearson Education, ISBN-13:978-8131715178
1. Subject Code: AE420 Course Title: Vehicle Safety Engineering

5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with the safety systems for automobiles, testing for safety, environment related testing
and Motor vehicle Acts.
Contents
1 Automotive vehicle testing for Safety: Introduction to active& passive vehicle 4
safety systems
2 Braking test (as per IS 11852-2001), ABS performance &Traction control test Seat 8
belt anchorage testing, Horn,lighting installation and mirror, test and their
simulation
3 Collapsible steering column testing :Frontal crash test, sidedoor intrusion, 8
interior and exterior test. Body block test (IS-11939-1996 ), Introduction to
theoffset, Frontal impacttest (IS-11939-1996. & ( ECE 94), Lateral Impact ( ECE
R95), AIS-029 : SURVIVAL SPACE FOR OCCUPANTS, pedestrianprotection test
and other upcoming standards
DRAFT AE-61
4 Environment related testing: Emission test: As per TAP 115,Full throttle test for 8
engine, pass by noise test and theirsimulation
5 Performance: gradability, Steering effort test, turning circlediameter test and their 8
simulation
Controls: speedometer calibration, MPFI, CRDI calibration test and their
simulation
6 Motor Vehicle Act (1988), Central Motor Vehicles Rules(1989) and subsequent 6
amendments
Total 42

1 Integrated Automotive Safety Handbook by U.W. Seiffert& M. Gonter Published by SAE-International
ISBN (978- 07680-6437-7)
1. Subject Code: AE422 Course Title: Packaging Technology

5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with packaging as intregral process, packaging materials, testing standards and quality.
S. No. Contact
Contents Hours
1 Introduction :Packaging as an integral process in productionand marketing , Packages, 6
Packaging characteristics, Physicalproperties. Mechanism of spoilage, degradation,
corrosion& Their prevention. Compatibility-permissible plasticizersand their migration to
food products. Package design
2 Packaging Materials :Papers and specialitypapers,cellulosic films and laminates. Plastic-PE, 8
PP PS, PVC,PVDC,Nylon, Polyester and their combinations. Expanded PE,PSand bubble
films. Glass containers, ampoules and vials.Composite containers, drums and paper tubes.
Aluminumfoils, laminates and coating. Single layer and multilayerpolymer packaging
3 Ancillary materials :Adhesives, Adhesive tapes. Cushioningmaterials and properties, 8
reinforcements. Stitching methods.Seals and enclosures. Lining compounds and
lacquers.Labels and instant labeling. Ink jet printing and bar coding.Graphic design. Printing
techniques-Printing inks and printevaluations
4 Testing, Standards and Quality control :Mechaniclatesting,resistance to light, insect and 10
mould. Barrier testing for air,oxygen etc., shelf life, worthiness of filled packages. Sealtests.
Standards- basic concepts for rigid and non rigidand non rigid and ancillary materials
standards for exportpackages, ISO 9000 and implications. Ecopackagingandregulatios
5 Process machinery and equipment : Machinery andequipment for manufacture of bottles, 10

carry-bags andlaminates
Total 42

1 Daniel Lu,“Materials for Advanced Packaging”, Publisher – Springer(ISBN-13: 9780387782188),2008
2 Brody “ Encyclopedia of PackgingTechnolgy” ,Publisher - John Wiley
3 Piringer& Bauer “Plastics Packaging”,publisher - , Wiley Interscience (ISBN-13: 9783527314553), 2008
DRAFT AE-62
4 Selke “Plastics Packaging”,Publisher –Hanser(ISBN-13: 9781569903728),2004
5 Morris ,”Nano Packaging” ,publisher - Springer(ISBN:9780387473253),2008
1. Subject Code: AE424 Course Title: Mechatronics

5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with basic electronics concept, types of sensors and transducers, microprocessors and
microcontrollers and mechatronic product design.
S. Contact
No. Contents Hours
1 Basic Electronics & Computation: Logic Gates, PassiveElectrical and Active Electronic 6
Elements, Ic and TheirCharacteristics, Number System, Boolean Algebra, DigitalCircuit
Technologies: Rtl/Dtl/Dctl/ Ttl/ Mos/ Cmos/Ecl,Combinational and Sequential Circuits, Flip-
Flops, Counters,Timers, Shift Registers. Memory System: Ram, Rom, Eprom,Eeprom, Pal, Plds,
and gas
2 Sensors andTransducers: An Introduction to Sensors andTransducer, Classification, Static and 6
Dynamic Characteristics,Sensors for Motion and Position, Force, Torque and TactileSensors,
Flow Sensors, Temperature Sensing Devices,Range Sensors, Ultrasonic Sensors, Fiber Optic
Devices inMechatronics. Actuators:-Hydraulic, Pneumatic and ElectricActuators.
3 Microprocessor and Microcontroller: 8085 MicroprocessorArchitecture and Its Operations- 8
Memory-Input, OutputDevices, Microprocessor Systems, Application in TemperatureControl&
Traffic Control. Micro Controller Intel-8051, BasicFeatures, Application in Domestic Washing
Machine
4 System Modeling: Mathematical Models, Building Blocks ofMechanical, Electrical, Fluid and 8
Thermal System. Systems,Rotational-Translation Systems, Electromechanical
Systems,Hydraulic-Mechanical Systems
5 Signal Conditioning & Data Presentation System: D andA Converters, Operational Amplifier; 8
Protection, Filtering,Digital Signals, Multiplexers, Pulse Modulation, DataAcquisition, Digital
Signal Processing; Pulse Modulation; DataPresentation Systems – Displays; Data Presentation
Elements;Magnetic Recording; Data Acquisition Systems; Testing &Calibration, Interfacing Da
and Ad Converters
6 Mechatronic Product Design: Traditional and MechantronicsDesign Approach, Autotronics: 6
Wind Screen Wiper Motion,Engine Management System, Digital Speedometer andOdometer,
Automatic Dim and Bright Control, EngineTemperature Measurements, Radiator Water
LevelIndicator, Bath Room Scale, A Pick & Place Robot, AutomaticCamera, & Bar Code
Recorder. Introduction to Mems, Nems.Mechatronics Application in Bionics and Avionics
Total 42
1 AppuuKuttan, K. K. ,”Introduction to Mechtronics”,publisher : Oxford University Press(ISBN
NO.9780195687811),2007
2 W. Bolton ,”Mechatronics” PublisheR: Addition Wesley (ISBN NO:9788131762578)
3 DevdasShetty and Richard A. Kolk Thomson Brooks/Cole ,”Mechatronics System Design” Publisher: C
L Engineering(ISBN-13: 9781439061985), 1997
4 David G. Alciation and Michae-L B. Hist, “Introduction to Mechatronics and Measuring
System”Publisher: Tata Mcgraw Hill(ISBN NO: 9780071163774),1999
DRAFT AE-63
5 Mahalik, N.P. “Mechatronics Principles, Concepts and Application”, Publisher: Tata Mcgraw Hill(ISBN
NO:0-70-048374-4),2006
1. Subject Code: AE426 Course Title: Financial Management

5. Credits: 4
6. Semester: VIII
9. Objective:To introduce students with fundamentals of managing finances, various techniques used, planning of finance,
cost accounting and financial analysis.
S. No. Contact
Contents Hours
1 Fundamentals of Financial Management :Introduction,Objectives, goals and functions of 6
financial Management.Time value of Money, Risks and Returns, Valuation ofSecurities
2 FINANCIAL INSTRUMENTS AND MARKETS : Forms ofBusiness Organizations, 8
capital structure, Constructionanalysis and interpretation of standard financial
statements,Dividend policy and share valuation
3 Capital Budgeting : Concept of Operating cycles and workingof Capital Management; 8
Capital Budgeting : Cost of capitalinvestment decisions and Risk analysis in Capital
Budgeting
4 Financial Planning : Planning of profit and leverages(operating and financial) Risk and 6
Return: Nature of risk,Inter-relationship in risk and return, effect of Tax on return
5 Cost Accounting : Definition and scope of cost accountancyand costing methods, elements 6
of cost overheadclassification distribution and absorption, process costing-Uniform, Marginal
and standard costing methods, Casestudies
6 Inflation and Financial Management : Inflation and Assetrevaluation, firm value, financial 8
market returns, financialanalysis, capital budgeting
Total 42

1 Khan and Jain , “Financial Management”, Publisher-TMH (ISBN: 978-0-07-065514-7)
2 I. M. Pandey , “Financial management” Publisher- Vikas Publishing House PVT. ltd (ISBN:
812591658X)
1. Subject Code: AE428 Course Title: Fracture Mechanics

5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with Mechanics of fracture, general yielding fracture mechanics, fracture safe design
and fractured surfaces.
Contents
DRAFT AE-64
1 Introduction: Inter-disciplinary approaches in fracturemechanics, modes of 6
deformation and failure
2 Linear Elastic Fracture Mechanics: Stress concentration inthe vicinity of notches 8
and cracks, Griffith’s energy concept,Irwin’s stress intensity approach, fracture
toughness
3 General Yielding Fracture Mechanics: Crack tip plasticzones, Wall’s crack 6
opening displacement concept, J-integral
4 Evaluation of Fracture Mechanics Parameters: Plane strainfracture toughness 6
testing i.e., KIC
5 Micro Structure and Fracture Toughness: Physicalsignificance of fracture 8
toughness in relation tomicrostructure, principles for the development of
fractureresistant materials
6 Fracture Safe Design Principles: Leak before break Paris Lawfor fatigue crack 8
growth.
Fractured surfaces: Acquaintance with some common fracture surfaces of various
materials, like steels, C.I, non ferrous alloys etc
Total 42

1 Prashant Kumar; ‘Elements of Fracture Mechanics”; Publisher- Tata McGraw- Hill Publishing Company
Limited(ISBN 0070656967)
2 Knott.J.F; “Fundamentals of Fracture Mechanics”, Publisher-John Wiley & Sons, Newyork(ISBN
0408705299)
3 Gdoutos.E.E; “Fracture Mechanics- An introduction”; Publisher-Springer (ISBN 9401581584)
4 Ramesh.K; “e-Book on Engineering Fracture Mechanics”; IIT Madras ( ISBN: 978-81-904235-0-2)
5 T. L. Anderson , “Fracture Mechanics: Fundamentals and Applications”, Publisher- CRC Press(ISBN

0849342600)
6 P. Kumar, “Elements of Fracture Mechanics”, Publisher- Wheeler Publishing
1. Subject Code: AE430 Course Title: Product Design and Development(DEC-6,7,8)

5. Credits: 4
6. Semester: VIII
9. Objective:To familiarize the students with the process of product design and development and to enhance critical thinking
and prepare him in the field of product design and development. To familiarize him with concept of product design and
development.
S. No. Contact
Contents Hours
1 Introduction: Classification/ Specifications of Products. Product life cycle. Product mix. 6
Introduction to product design. Modern product development process. Innovative thinking.
Morphology of design
DRAFT AE-65
2 Conceptual Design: Generation, selection & embodiment of concept. Product architecture. 8
Industrial design: process, need. Robust Design: Taguchi Designs & DOE. Design
Optimization
3 Design for Mfg& Assembly: Methods of designing for Mfg& Assy. Designs for 6
Maintainability. Designs for Environment. Product costing. Legal factors and social issues.
Engg ethics and issues of society related to design of products
4 Value Engineering / Value Analysis. : Definition. Methodology. Case studies. Economic 6
analysis: Qualitative & Quantitative
5 Ergonomics / Aesthetics: Gross human autonomy. Anthropometry. Man-Machine interaction. 8
Concepts of size and texture, colour .Comfort criteria. Psychological & Physiological
considerations. Creativity Techniques: Creative thinking, conceptualization, brain storming,
primary design, drawing, simulation, detail design
6 Concurrent Engg , Rapid prototyping , Tools for product design – Drafting / Modeling 8
software. CAM Interface. Patents & IP Acts. Overview, Disclosure preparation
Total 42

1 David G Ullman, “The Mechanical Design Process.” Publisher- McGrawhillIncSingapore(ISBN-13:
9780072975741) 1992 N J M Roozenberg , J Ekels , N F M Roozenberg “ Product Design Fundamentals
and Methods .”Publisher- John Willey & Sons (ISBN-13: 9780471954651) 1995
2 Kevin Otto & Kristin Wood Product Design: “Techniques in Reverse Engineering and new Product
Development.” 1 / e 2004 , Publisher- Pearson Education New Delhi (ISBN-13: 9780130212719)
3 L D Miles “Value Engineering.”Publisher- McGraw-Hill, 1972
4 Karl T Ulrich, Steven D Eppinger , “ Product Design &Development.”Publisher- Tata McGrawhill New
Delhi (ISBN-13: 9780078029066)2003
5 Hollins B & Pugh S “Successful Product Design.” Publisher- Butter worths London (ISBN
9780408038614)
1. Subject Code: AE432 Course Title: Tractors and Farm Equipment and Off Road Vehicles
5. Credits: 4
6. Semester: VIII
9. Objective:This course introduces to general design of tractors, farm equipments; engine framework, off road vehicles and
maintenance machines.
S. No. Contact
Contents Hours
1 General Design of Tractors :Classification of Tractors-MainComponents of Tractor-Safety 8
Rules. Control of the Tractorand Fundamentals of Engine Operation: Tractor Controlsand the
Starting of the Tractor Engines-Basic Notionsand Definition-Engine Cycles-Operation of
MulticylinderEngines-General Engine Design - Basic Engine PerformanceCharacteristics
2 Engine Frame Work and Valve Mechanism of Tractor :Cylinder and Pistons-Connecting 10
Rods And CrankshaftsEngine Balancing – Construction and Operation of theValve
Mechanism-Valve Mechanism Components – ValveMechanismTroubles.Cooling System,
Lubrication System and Fuel System of
A Tractor: Cooling System – Classification – Liquid Cooling System – Components,
Lubricating System Servicing and Troubles – Air Cleaner and Turbo Charger – Fuel Tanks
DRAFT AE-66
and Filters –Fuel Pumps
3 Farm Equipments : Working Attachment of Tractors-FarmEquipment – Classification – 8
Auxiliary Equipment – Trailersand Body Tipping Mechanism
4 Introduction of off Road Vehicles :Classification of off RoadVehicles and Their Application 8
Excavator: Different Typesof Shovel and Dragline, Their Construction , OperatingPrinciples,
Operating Cycles . Production Capacity andCost of Production Transport Equipment: Various
Types ofDumpers, Main System, Components and Carrying Capacityof Dumper
5 Road Making and Maintenance Machines :DifferentTypesof Dozer, Grader, and Their 8
Construction. Operating Principles, Production Capacity and ApplicationMechanism.Other
Equipment: Scraper and Front End Loader, TheirConstruction and OperationMaintenance:
Maintenance Aspect of off Road Vehicles
Total 42
1 Abrosimov, K. Bran Berg, A and Katayer, K. Road Making Machinery, M I R. Publishers Moscow. 1971
2 De, A. Latest Development of Heavy Earth Moving Machinery, Annapurna Publishers, Dhanbad 1995
3 Nichols, Herber L (Jr.), Moving the Earth, Galgotia Publishing House, New Delhi, 1962
4 Rudnev, V. K. , Digging of Soils by Earthmover With Power Parts, Oxanian Press Pvt. Ltd., New Delhi
5 Rodichev and G.Rodicheva, Tractor and Automobiles, Mir Publishers, 1987
6 Kolchin. A., and V.Demidov Design of Automotive Engines for Tractor, Mir Publishers, 1972
1. Subject Code: AE434Course Title: Automobile Process Control

5. Credits: 4
6. Semester: VIII
9. Objective:To understand various methods to control automotive processes, resource planning, operational performance,
control system.
S. No. Contact
Contents Hours
1 Introduction: Classification/ Specifications of Products. Product life cycle. Product mix. 8
Introduction to product design. Modern product development process. Innovative thinking.
Morphology of design
2 Resource planning : Aggregate Production Planning – Chaseand leveling strategies, MRP, 10
MRP-II, Agile manufacturingSystems
3 OPERATIONAL PERFORMANCE Engine performance & operating characteristics, 8
Operation at full load and part load conditions, fuel economy, effect of vehicle condition, tyre
and road condition, traffic condition and driving habits on fuel economy, vehicle safety.
4 CONTROL SYSTEMS Braking arrangements & Characteristics, weight transfer, steering 8
arrangements, rigid & independent suspension, roll centre, torsion bar, stabilizer, radius bar.
5 VEHICLE TRANSMISSION PERFORMANCE Characteristics & features of friction 8
clutches, mechanical gear transmission &Epicyclic gear boxes.
Total 42
DRAFT AE-67
1 Martyr A. J, Plint M. A, “Engine Testing Theory and Practice” 3 rdeditionPublisher- Butterworth-
Heinemann, 2007(ISBN -13: 9780768018509 )
2 Gousha H. M,“Engine Performance Diagnosis & Tune Up Shop Manual” Publisher- Canfield press (ISBN
9780064540032)
3 Giles J. G, “Vehicle Operation & Performance” Publisher-Iliffe, 1969
4 Crouse. W. H, Anglin. D. L, “Motor Vehicle Inspection”, Publisher-McGraw Hill, (ISBN -
13: 9780070148130 )1978
DRAFT AE-68
University Elective Courses
CO351 ENTERPRISE & JAVA PROGRAMMING
1. Subject Code: CO351 Course Title: Enterprise & Java programming

3. Examination Duration (ETE )(Hrs.): Theory 3 Hrs Practical 0
4. Relative Weightage: CWS 25 PRS 0 MTE 25 ETE 50 PR 0
5. Credits: 3
6. Semester: ODD
7. Subject Area: UEC
8. Pre-requisite: Nil
9. Objective: To introduce fundamentals of Enterprise Java Programming, concepts of program
development using beans.
10. Details of Course
Unit Contents Contact
DRAFT AE-69
No. Hours
1. Collections : Collection Interfaces, Concrete Collections, Collections Framework. 5
Multithreading : Creating and running thread, Multiple thread synchronization, Thread
communication, Thread group, Thread priorities, Daemon Thread, Life Cycle ofThread.
2. Fundamentals in Networking: Sockets in Java - Internet Addressing - DNS – Ipv4,IPv6- 6
URL class - TCP/IP and Datagram. The interfaces and classes for networking
:Interfaces and classes of java.net package; InetAddress class : IP address scope - Host
name resolution - Methods of InetAddress class; Program to look up the IP addresses for
a hostname - Factory methods - Creating and using Sockets : Socket class - constructors
and methods of Socket class. Creating TCP servers &clients : TCP/IP server sockets -
Constructors and methods of ServerSocket class - Program to create a TCP/IP server and
client. Handling URL: URL class - constructors and methods of URL class -
URLConnection class - fields of URLConnection class - methods of URLConnection
class. Working with Datagrams: DatagramPacket - Constructors for DatagramPacket
class - Methods of DatagramPacket class - creating Datagram server and client.
3. JDBC Package :JDBC – JDBC versus ODBC – Types of JDBC drivers – Connection – 6
Statement – PreparedStatement.ResultSet :Fields of ResultSet – Methods of ResultSet –
Executing a query - ResultSetMetaData – DatabaseMetaData. Datatypes in JDBC :
Basic datatypes in JDBC – Advanced datatypes in JDBC – fields of Statement – methods
of Statement – CallableStatement Interface – BatchUpdates
4. Servlets : Using Servlets - Servlet Package - Servlet lifecycle - init() method - service() 7
method , doGet() method, doPost() method and destroy() method . Classes and
interfaces of Servlet: Servlet - GenericServlet - ServletConfig - ServletContext -
ServletException - ServletInputStream - ServletOutputStream - ServletRequest –
ServletResponse. Classes and interfaces of HttpServlet:
HttpServlet - HttpServletRequest - HttpServletResponse - Reading HTML form data from
Servlets - Response Headers - Response Redirection. Handling Servlets : Servlet
Chaining - HttpUtils - Database access with JDBC inside servlet. State and Session
management : Cookies - HttpSession - Server Side includes - Request forwarding –
RequestDispatcher.
5. Concepts of Java Beans: Java Beans - Advantage of Java Beans - Reflection and 9
Introspection - Customizers – Persistence. Developing Java Beans : Bean Developer Kit
(BDK) - Creating a Java Bean - Creating a Bean Manifest file - Creating a Bean JAR file.
Controls and Properties of a Bean : Adding controls to Beans - Giving Bean Properties
- BeanInfo interface - SimpleBeanInfo class. Types of Properties: Design pattern
for Properties: Simple properties - Indexed Properties; Descriptor Classes - Giving
Bean methods - Bound and Constrained Properties - Property Editors.
6. Components of EntrepriseBeans : Distributed Multitiered Applications -J2EE 9
components: J2EE clients, Web components, J2EE containers. Developing an
Enterprise Bean : Packaging - Enterprise JavaBeans Technology - Enterprise Bean -
Contents of an Enterprise Bean. Session Bean : Stateful session bean – life cycle of
stateful session bean - Stateless session bean – life cycle of stateless session – ejbCreate
methods – Business methods – Home interface – Remote interface – Running the session
DRAFT AE-70
bean. Entity Bean :Persistence - Bean managed Persistence - Container Managed
Persistance - Shared Access - Primary key – Relationships. Message Driven Bean :life
cycle of message driven bean – onMessage method.
TOTAL 42
11. Suggested Books

S. No. Name of Books / Authors/ Publishers
Text Books
1. Java 2 Programming Black Book - Steven Holzner dreamTech Press(ISBN-
9788177226553), 2005
2. JavaBeans Programming from the GroundUp - Joseph O’Neil, TMGH, New
Delhi(ISBN- 007463786X), 2001
Reference Books
3 Head first EJB-O’Reilly (ISBN: 8173665265), 2003
4. “Beginning Java™ EE 6 Platform with GlassFish 3 From Novice to Professional” by
Antonio Goncalves– Apress publication(ISBN: 9781430219545), 2009
CO353 E-COMMERCE AND ERP

1. Subject Code: CO353 Course Title: E-Commerce and ERP
5. Credits: 3
6. Semester: ODD
9. Objective: To introduce E-Commerce and ERP
No. Hours
1. Introduction: Definition of Electronic Commerce, E-Commerce: technology and 7
prospects, incentives for engaging in electronic commerce, needs of E-Commerce,
advantages and disadvantages, framework, Impact of E-commerce on business, E-
Commerce Models.
2. Network Infrastructure for E- Commerce: Internet and Intranet based E-commerce- 7
DRAFT AE-71
Issues, problems and prospects, Network Infrastructure, Network Access
Equipments, Broadband telecommunication (ATM, ISDN, FRAME RELAY).
Mobile Commerce: Introduction, Wireless ApplicationProtocol, WAP technology,
Mobile Information device.
3. Web Security: Security Issues on web, Importance ofFirewall, components of 6
Firewall, Transaction security, Emerging client server, Security Threats, Network
Security, Factors to consider in Firewall design, Limitation of Firewalls.
4. Electronic Payments: Overview, The SET protocol, Payment Gateway, certificate, 6
digital Tokens, Smart card, credit card, magnetic strip card, E-Checks, Credit/Debit
card based EPS, online Banking. EDI Application in business, E- Commerce Law,
Formsof Agreement, Govt. policies and Agenda.
5. ERP Introduction, Benefits, Origin, Evolution and Structure:Conceptual Model of 8

ERP, The Evolution of ERP, The Structure of ERP. Business Process Reengineering,
Data ware Housing, Data Mining, Online Analytic
Processing(OLAP), Product Life Cycle Management(PLM),LAP, Supply chain
Management.
6. ERP Marketplace and Marketplace Dynamics:Market Overview, Marketplace 8
Dynamics, The Changing ERP Market. ERP- Functional Modules: Introduction,
Functional Modules of ERP Software, Integration of ERP, Supply chain and
Customer Relationship Applications. ERP Implementation Basics, ERP
Implementation Life Cycle, Role of SDLC/SSAD, Object Oriented Architecture,
Consultants, Vendors and Employees, ERP & E-Commerce, Future Directives- in
ERP, ERP and Internet.
TOTAL 42
11. Suggested Books

1. Goel, Ritendra “E-commerce”, New Age International,2007
2. Ravi Kalakota, Andrew Winston, “Frontiers of Electronic Commerce”, Addison- Wesley.

1996
3. Vinod Kumar Garg and Venkitakrishnan N K, “Enterprise Resource Planning –
Concepts and Practice”, PHI 2004
4. Rahul V. Altekar “Enterprise Resource Planning”, Tata McGraw Hill, 2004
5. Alexis Leon, “ERP Demystified”, Tata McGraw Hill, 2014
CO355 CRYPTOGRAPHY AND INFORMATION SECURITY

1. Subject Code: CO355 Course Title: Cryptography and Information Security
DRAFT AE-72
5. Credits: 3
6. Semester: ODD
9. Objective: To study various cryptographic techniques, mathematics related to cryptography and some
network security protocols.

No. Hours
1. Introduction: Need for security, Introduction to security attacks, services and 6
mechanism, introduction to cryptography, Conventional Encryption: Conventional
encryption model, classical encryption techniques- substitution ciphers and
transposition ciphers, cryptanalysis, stereography, stream and block ciphers,
Intruders, Viruses and related threads.
2. Modern Block Ciphers: Block ciphers principals, Shannon’s theory of confusion 6
and diffusion, Fiestal structure, data encryption standard(DES), strength of DES,
crypt analysis of DES, block cipher modes of operations, triple DES, IDEA
encryption and decryption, strength of IDEA, key distribution.
3. Introduction to graph, ring and field, prime and relative prime numbers, modular 8
arithmetic, Fermat’s and Euler’s theorem, primarily testing, Euclid’s Algorithm,
Chinese Remainder theorem, discrete logarithms, Principals of public key crypto
systems, RSA algorithm, security of RSA, key management, Diffle-Hellman key
exchange algorithm, introductory idea of Elliptic curve cryptography, Elganel
encryption
4. Message Authentication and Hash Function: Authentication requirements, 6
authentication functions, message authentication code (MAC), hash functions,
security of hash functions and MACS, MD5 message digest algorithm, Secure hash
algorithm(SHA), Public Key Infrastructure(PKI): Digital Certificate, private key
management, Digital Signatures: Digital Signatures, authentication protocols, digital
signature standards (DSS), proof of digital signature algorithm.
5. Authentication Applications: Kerberos and X.509, directory authentication service, 8

password, challenge-response, biometric authentication, electronic mail security-
pretty good privacy (PGP), S/MIME.
6. IP Security: Architecture, Authentication header, Encapsulating security payloads, 8
combining security associations, key management.
Web Security: Secure Socket Layer(SSL) and transport layer security, TSP, Secure
Electronic Transaction (SET), Electronic money, WAP security, firewall design
principals, Virtual Private Network (VPN) security.
TOTAL 42
11. Suggested Books

1. William Stallings, “Cryptography and Network Security: Principals and Practice”, Prentice
DRAFT AE-73
Hall, New Jersy. 2016
2. Atul Kahate, “Cryptography and Network Security”, TMH. 2009
3. Behrouz A. Forouzan, “Cryptography and Network Security”, TMH.2007
4. Johannes A. Buchmann, “Introduction to Cryptography”, Springer-Verlag. 2004
5. Bruce Schiener, “Applied Cryptography”. 2015
CO357 OPERATING SYSTEM

1. Subject Code: CO357 Course Title: Operating System
5. Credits: 3
6. Semester: ODD
9. Objective: To familiar with the fundamental principles of the operating system, its services and
functionalities, the concepts of processes, synchronization and scheduling, memory management and need for
protection in computer systems
No. Hours
1. Introduction: Operating system and function, Evolution of operating system, 4
Batch, Interactive, Time Sharing and Real Time System, System protection.
Operating System Structure: System Components, System structure,

Operating System Services.
2. Concurrent Processes: Process concept, Principle of Concurrency, Producer 9
Consumer Problem, Critical Section problem, Semaphores, Classical
problems in Concurrency, Inter Process Communication, Process Generation,
Process Scheduling.
CPU Scheduling: Scheduling Concept, Performance Criteria of Scheduling
Algorithm, Evolution, Multiprocessor Scheduling.
3. Deadlock: System Model, Deadlock Characterization, Prevention, Avoidance 8
and Detection, Recovery from deadlock combined approach.
4. Memory Management: Base machine, Resident monitor, 9
Multiprogramming with fixed partition, Multiprogramming with variable
partition, Multiple base register, Paging, Segmentation, Virtual memory
concept, Demand paging, Performance, Paged replacement algorithms,
Allocation of frames, Thrashing, Cache memory organization, Impact on
DRAFT AE-74
performance.
5. I/O Management & Disk Scheduling: I/O devices and organization of I/O 9
function, I/O Buffering, DISK I/O, Operating System Design Issues.
File System: File Concept, File Organization and Access Mechanism, File
Directories, File Sharing, Implementation Issues
6. Case Studies: Windows, Linux and Unix 3
TOTAL 42
11. Suggested Books

Text Books
1. Silbersachatz and Galvin, “Operating System Concepts”, Pearson, 5th Ed, 2001
2. Tannenbaum, “Operating Systems”, PHI, 4th Edition, 2000
Reference Books
3. Milenekovic, “Operating System Concepts”, McGraw Hill 2001
4. Dietel, “An introduction to operating system”, Addison Wesley 1983
CO359 INTELLECTUAL PROPERTY RIGHTS

1. Subject Code: CO359 Course Title: Intellectual Property Rights
3. Examination Duration (ETE )(Hrs.): Theory 3Hrs Practical 0
5. Credits: 3
6. Semester: ODD
9. Objective:To familiarize the students with basic concepts in each type of IPR together with historical
developments in the subject & its importance in modern times.
No. Hours
1. Introduction: Concept of IPR, Historical development , kinds of IPR,brief 5
description of patent, trademark, copyright ,industrial design, importance of
DRAFT AE-75
IPR, IPR authorities.
2. PATENTS :Introduction, Indian Patent Act 1970 &2002, Protectable subject 8
matter--patentable invention, Procedure for obtaining patent, Provisional and
complete specification Rights conferred on a patentee, transfer of patent,
Revocation and surrender of patents, Infringement of patents, Action for
infringement, Patent agents, Patent in computer programs.
3. Trademark: Introduction, Statutory authorities, principles of registration of 7
trademarks, rights conferred by registration of trademarks, Infringement of
trademarks and action against infringement, procedure of registration and
duration,licensing in trademark
4. Copyright: Introduction, Author and ownership of copyright, rights conferred 7
by copyright,term of copyright, assignment/licence of copyright, Infringement
of copyright ,remedies against infringement of copyright, registration of
copyright, copyright enforcement and societies
5. Industrial design: The design act-2000, registerability of a design, procedure of 6
registration of a design, piracy of a registered design, Case law on designs
6. International IPR & case laws: World intellectual property organization, WCT, 9
WPPT, TRIPS, Copyright societies, international IPR dispute resolution
mechanism. Case laws.
TOTAL 42
11. Suggested Books

Textbooks:
1. Law Relating to Intellectual property, fourth edition by B.L.Wadehra .Universal law
publishing co. pvt. Ltd , 2007. ISBN 978-81-7534-588-1
Reference books:
2. Intellectual property: Patents, copyright ,trademarks and allied rights. Fifth edition by
W.R. Cornish. Sweet & Maxwell publisher, 2003. ISSN 9780421781207
3 Law and practice of intellectual property in India by VikasVashishth, 2006
ISBN: 81-7737-119-3
4 Patents ,copyrights, trade marks and design by B L Wadhera, 2014
5 Dr. B. L. Wadhera, “Intellectual Property Law Handbook”. Universal Law Publishing,

2002.
CO361 DATABASE MANAGEMENT SYSTEM
DRAFT AE-76
1. Subject Code: CO361 Course Title: Database Management System
5. Credits: 3
6. Semester: ODD
9. Objective: To provide knowledge about the principles, concepts and applications of Database Management
System.

No. Hours
1. Introduction: Data base system concepts and its architecture, Data models schema and 7
instances, Data independence and data base language and interface, Data definition
languages, DML. Overall data base structure.
Data modeling using Entity Relationship Model: E.R. model concept, notation for ER
diagrams mapping constraints, Keys, Concept of super key, candidate key, primary key
generalizations, Aggregation, reducing ER diagrams to tables, extended ER model.
2. Relational Data Model and Language: Relational data model concepts, integrity 7
constraints, Keys domain constraints, referential integrity, assertions, triggers, foreign key
relational algebra, relational calculus, domain and tuple calculus, SQL data definition
queries and updates in SQL.
3. Data Base Design: Functional dependencies, normal forms, 1NF, 2NF, 3NF and BCNF, 6
multi-valued dependencies fourth normal forms, join dependencies and fifth normal forms.
Inclusion dependencies, loss less join decompositions, normalization using FD, MVD and
JDs, alternatives approaches to database design.
4. File Organization, Indexing and Hashing Overview of file organization techniques, 8
Indexing and Hashing- Basic concepts, Static Hashing, Dynamic Hashing, Ordered
indices, Multi-level indexes, B-Tree index files, B+- Tree index files, Buffer management
Transaction processing concepts: Transaction processing system, schedule and
recoverability, Testing of serializability, Serializability of schedules, conflict & view
serializable schedule, recovery from transaction failures, deadlock handling.
5. Concurrency Control Techniques: Locking Techniques for concurrency control, time 8
stamping protocols for concurrency control, concurrency control in distributed systems.
multiple granularities and multi-version schemes.
6 Case Studies: Commercial databases, Oracle, Postgress, MySQL 6
TOTAL 42
11. Suggested Books

Text Books
DRAFT AE-77
1 Elmasri, Navathe,”Fundamentals of Database systems”, Addision Wesley, 2016
2 Korth, Silberchatz, Sudarshan,”Data base concepts”, McGraw-Hill. 2010
Reference Books
1. Ramakrishna, Gehkre, “Database Management System”, McGraw-Hill 2014
2. Date C.J.,”An Introduction to Database systems” 2006
EC351 MECHATRONICS
1. Subject Code: EC351 Course Title: Mechatronics
5. Credits: 4
6. Semester: V
9. Objective: To introduce fundamentals of Mechatronics
No. Hours
1. Introduction : Basic Definitions and key elements of Mechatronics, 6
Mechatronic Design Approach: Functions of Mechatronic Systems, Ways of
Integration, Information Processing Systems (BasicArchitecture and hardware
and Software trade-offs, Concurrent Design Procedure for Mechatronic
Systems
2. System Interfacing, Instrumentation,and Control Systems: Input and output 6
Signals of a Mechatronic System, Signal Conditioning and microprocessor
control, Microprocessor-Based Controllers and Microelectronics,
Programmable Logic Controllers
3. Introduction to Micro- and Nanotechnology, Micro-actuators, Micro-sensors, 10
Nanomachines. Modeling Electromechanical Systems: Models for Electromechanical
Systems, Rigid Body Models, Basic Equations of Dynamics of Rigid Bodies, Simple
Dynamic Models, Elastic System Modeling, Dynamic Principles for Electric and
Magnetic Circuits, Earnshaw’s Theorem and Electromechanical Stability
4. The Physical Basis of Analogies in Physical System Models: The Force- 6
Current Analogy: Across and Through Variables, Maxwell’s Force-Voltage
Analogy:Effort and Flow Variables, A Thermodynamic Basis for Analogies
5. Introduction to Sensors and Actuators: Characteristics of Sensor and Actuator 6
Time and Frequency Measurement, The Role of Controls an modelling in
Mechatronics: Integrated Modeling, Design, and Control Implementation,
Special Requirements of Mechatronics that Differentiate from Classic Systems
and Control Design, Modeling as Part of the Design Process, Modeling of
Systems and Signals
6. Design Optimizationof Mechatronic Systems: Optimization Methods, 8
DRAFT AE-78
Principles of Optimization : ParametricOptimization, General Aspects of the
OptimizationProcess, Types of Optimization Methods, Selection of aSuitable
Optimization Method, Optimum Design of Induction Motor (IM), IM Design
Introduction : Classical IM Design, Use of a Neuron Network for the
Identification ofthe Parameters of a Mechanical dynamic system, Mechatronics
and Computer Modelingand Simulation, Mechatronics and the Real-Time
useof Computers, Communications andComputer Networks,Control
withEmbedded Computersand ProgrammableLogic Controllers
TOTAL 42
11. Suggested Books

1. Mechatronics : an introduction by Robert H Bishop, Taylor & Francis, 2005
2 Introduction to Mechatronics by KK AppuKuttan Oxford University Press, 2007
EC353 COMPUTER VISION

1. Subject Code: EC-353 Course Title: Computer Vision
4. Relative Weightage: CWS 25 PRS - MTE 25 ETE 50 PR 0
5. Credits: 4
6. Semester: V
9. Objective: To introduce fundamentals of Computer Vision and algorithms for object detection,
recognition and tracking.

No. Hours
1. Introduction to computer vision: Role of Artificial intelligence and image processing 5
in Computer Vision, Industrial Machine Vision applications, System architecture.
Visual Sensors: Camera sensors: RGB, IR, Kinect sensor, Camera interfaces and
video standards, Characteristics of camera sensors commercially available cameras.
Camera Calibration: Interior, exterior calibration and rectification using Tsai’s
Calibration method.
2. Basics of image processing – Pixel representations histograms ,transforms, colour 7
filters, noise removal,
Geometry: Math methods -linear algebra, vectors, rotations, Stereo – Epi-polar
geometry, correspondence, triangulation ,Disparity maps .
Basics of video processing – Background subtraction techniques – frame
differencing, Gaussian Mixture Modelling (GMM), Object localization and
processing:- Contours, edges, lines, skeletons.
3. Image representation: Local Wavelet basis (multiscale), Global Fourier 8
DRAFT AE-79
basis(Frequency), Adaptive basis (PCA and ICA) , Adaptive basis(discriminants)
Basics of Object detection – Template matching, Cascade classifiers.
4. Object Recognition : Object Modeling, Bayesian Classification, Feature Selection 6
and Boosting, Scene and Object Discrimination.
5. Motion and Tracking: Motion detection and tracking of point features, optical flow, 8
SURF, SIFT. Tracking- Kalman filter, Particle Filter, Comparison of deterministic
and probabilistic methods condensation, tracking humans, multi-frame
reconstruction under affine and perspective projection geometry.
6. Introduction to Computer Vision programming libraries: MATLAB/OpenCV. 8
advantages and disadvantages of each .
TOTAL 42
11. Suggested Books

S. Name of Books / Authors/ Publishers
No.
1. Computer Vision: A Modern Approach (2nd Edition) 2nd Edition by David
A. Forsyth (Author), Jean Ponce (Author), 2002
2. Learning OpenCV: Computer Vision with the OpenCVLibrary Gary Bradski,
Adrian Kaehler, 2008
EC355 EMBEDDED SYSTEM
1. Subject Code: EC- 355 Course Title: Embedded Systems

3. Examination Duration (ETE)(Hrs.): Theory 3 Hrs Practical 0
5. Credits: 4
6. Semester: V
8. Pre-requisite: Knowledge of Computer Architecture and Microprocessors
9. Objective: To introduce fundamentals of 16 and 32 bit Microcontrollers, assembly language
programming. The course also focuses on interfacing of different interrupt driven peripherals. It also
covers in detail Real Time Operating Systems, Bus architecture, Digital Signal Processors and System
On-Chip.

No. Hours
1. Overview of Embedded Systems: Characteristics of Embedded Systems. 8
Comparison of Embedded Systems with general purpose processors. General
DRAFT AE-80
architecture and functioning of micro controllers. PIC and 8051 micro controllers :
Architecture, memory interfacing , interrupts, instructions, programming and
peripherals .
2. ARM : Architecture, memory interfacing , interrupts, instructions and Assembly 12
Language programming. Exception processing and pipeline architecture and
applications.
3. Digital Signal Processors: DSP Architecture, DSP applications, algorithms, data 4
path, memory, addressing modes, peripherals. TI and Sharc family of DSP
processors.
4. System On Chip : Evolution, features, IP based design, TI OMAP architecture and 4
peripherals. Digital Multimedia processor: Architecture and peripherals.
5. SRAM, DRAM working and organization. Interfacing memory with ARM 7. Elements of 4
Network Embedded Systems
6. RTOS : RT-Linux introduction, RTOS kernel, Real-Time Scheduling 10
Bus structure: Time multiplexing, serial, parallel communication bus structure. Bus
arbitration, DMA, PCI, AMBA, I2C and SPI Buses.
TOTAL 42
11. Suggested Books

1. Computers as components: Principles of Embedded Computing System Design, Wayne
Wolf, Morgan Kaufman Publication, 2000
2. ARM System Developer’s Guide: Designing and Optimizing System Software, Andrew N.
Sloss, Dominic Symes, Chris Wright, , Morgan Kaufman Publication, 2004
3. Design with PIC Microcontrollers, John B. Peatman, Pearson Education Asia, 2002
4. The Design of Small-Scale embedded systems, Tim Wilmshurst, Palgrav, 2003
5. Embedded System Design, Marwedel, Peter, Kluwer Publishers, 2004
EC357 DIGITAL IMAGE PROCESSING
1. Subject Code: EC 357 Course Title: Digital Image Processing

3. Examination Duration (ETE) (Hrs.): Theory 3Hrs Practical 0
5. Credits: 4
6. Semester: V
8. Pre-requisite: Signals and Systems
9. Objective: To introduce the fundamentals of visual information, representation of 2-D and 3-D
information, enhancement of information, retrieval of information, and various colour models.
DRAFT AE-81
No. Hours
1. Introduction to Image processing, fundamental steps in DIP, concept of visual 6
information, image formation model, image sampling and quantization, digital
image representation, spatial and gray level resolution, relationship between pixels,
application of image processing system.
2. Introduction to Multidimensional signals and systems, 2D-Signals, 2D systems, 8
classification of 2D system, 2D convolution, 2D Z-transform, Image Transform:
2D-DFT, discrete cosine, discrete sine, Haar, Walsh, Hadamard, Slant, KL, SVD,
Hough, Radon, Ridgelet.
3. Image enhancement; Spatial domain: linear transformation, image negative, grey 10
level shifting, non-linear transformation, logarithmic transformation, exponential
transformation, grey level slicing, bit plane slicing, image averaging, mask
processing, histogram manipulations, histogram thresholding, histogram stretching,
histogram equalization, noise removing filters, smoothing filters, sharpening filters.
Enhancement in Frequency Domain; ideal low pas filter, Butterworth low pass filter,
ideal high pass filters, Butterworth high pass filter, band pass filter, Gaussian filters,
Homomorphic filtering.
4. Image restoration: degradation model, noise models, restoration in presence of 6
noise, periodic noise removal in frequency domain, notch filters, inverse filtering,
Wiener filtering.
5. Introduction to Morphological Image Processing operations, dilation and erosion, 6
opening and closing, hit-or-miss transformation, boundary extraction, region filling,
extraction connected components, convex hull, thinning, thickening, skeletons,
pruning.
6. Introduction to various colour models: RGB, CMY, CMYK, HSI, HSV, and YCbCr. 6
Concept of image compression, Image Segmentation: detection of discontinuities,
edge linking and boundary detection, thresholding, region based segmentation, use
of motion in segmentation.
TOTAL 42
11. Suggested Books

1. Digital Image Processing/ Gonzalez and Woods/ Pearson Education, 2008/Third Edition
2. Fundamentals of Digital Image Processing/ A.K. Jain/ PHI, Indian Edition
3. Digital Image Processing using MATLAB/ Gonzalez, Woods, and Eddins/ McGraw Hill,
Second/ 2013
4. Digital Image Processing/ K.R. Castleman/ Pearson, 2014
5.
Digital Image Processing Algorithms and Applications/I. Pitas/John Wiley, 2002
6. Image Processing, Analysis, and Machine Vision/Milan Sonka, Vaclav Hlavac, Roger
Boyale/ Cengage Learning, 4th Edition
DRAFT AE-82
EC359 VLSI DESIGN
1. Subject Code: EC -359 Course Title: VLSI Design

3. Examination Duration (ETE ) (Hrs.): Theory 3 Hrs Practical 0
5. Credits: 4
6. Semester: V
9. Objective: To give the student an understanding of the different design steps required to carry out a
complete digital VLSI (Very-Large-Scale Integration) design in silicon.
10.Details of Course

.No. Hours
1. Introduction to VLSI, Manufacturing process of CMOS integrated circuits, CMOS n-well 6
process design rules, packaging integrated circuits, trends in process technology.
MOS transistor, Energy band diagram of MOS system,MOS under external bias, derivation
of threshold voltage equation, secondary effects in MOSFETS
2. MOSFET scaling and small geometry effects, MOScapacitances, Modeling of MOS 6
transistors using SPICE, level I II and equations, capacitance models.
The Wire: Interconnect parameters: capacitance, resistanceand inductance.
Electrical wire models: The ideal wire, the lumpedmodel, the lumped RC model, the
distributed RC model, the transmission line model, SPICE wire models.
3. MOS inverters: Resistive load inverter, inverter with n-type MOSFET load, CMOS inverter: 8
Switching Threshold, Noise Margin, Dynamic behavior of CMOS inverter, computing
capacitances, propagation delay, Dynamic power consumption, static power consumption,
energy, and energy delay product calculations, stick diagram, IC layout design and tools.
4. Designing Combinational Logic Gates in MOS and CMOS: 8
MOS logic circuits with depletion MOS load.
Static CMOS Design: Complementary CMOS, Ratioedlogic, Pass transistor logic, BiCMOS
logic, pseudo nMOS logic,
Dynamic CMOS logic, clocked CMOS logic CMOS domino logic, NP domino logic, speed
and power dissipation of Dynamic logic, cascading dynamic gates.
5. Designing sequential logic circuits: Timing matrices for sequential circuits, classification of 8
memory elements, static latches and registers, the bistability principle, multiplexer based
latches , Master slave Edge triggered register , static SR flip flops, dynamic latches and
registers, dynamic transmission gate edge triggered register, the C2MOS register
6. Pulse registers, sense amplifier based registers, Pipelining, Latch verses Register based 6
pipelines, NORA-CMOS. Two-phase logic structure; VLSI designing methodology –
Introduction, VLSI designs flow, Computer aided design technology: Design capture and
verification tools, Design Hierarchy Concept of regularity, Modularity & Locality, VLSI
design style, Design quality.
TOTAL 42
11. Suggested Books

DRAFT AE-83
1. Digital integrated circuits a design perspective byJan M Rabaey, Anantha Chadrakasan Borivoje
Nikolic, Pearson education, 2011.
2. CMOS digital integrated circuits by Sung MO KangYusuf Leblebici, Tata McGraw Hill Publication,
2002
3. Principle of CMOS VLSI Design by Neil E Weste and Kamran Eshraghian, Pearson education,
2000.
EE351 POWER ELECTRONIC SYSTEMS

1. Subject Code: EE-351 Course Title: Power Electronic Systems
2. Contact Hours : L: 3 T: 0 P: 0
3. Examination Duration (Hrs.) : Theory: 3 Practical: 0
4. Relative Weight CWS: 25 PRS: 0 MTE: 25 ETE: 50 PRE: 0
5. Credits: 3
6. Semester: VIII
8. Pre-requisite: EE-203, EE-301
9. Objective:To familiarize the students with power electronics and its applications.
Unit Contact
No. Contents Hours
1. Solid State Power Devices: Principle of operation of SCR, dynamic characteristic of 8
SCR during turn ON and turn OFF, parameters of SCR, dv/dt and di/dt protection,
snubber circuit, commutation circuits; Principle of operation ofMOSFET, IGBT,
GTO, MCT, SIT, SITH, IGCT, their operating characteristics.
2. Single-phase Converter: Half wave converter, 2-pulse midpoint converter, half 8
controlled and fully controlled bridge converters, input current and output voltage
waveforms, effect of load and source impedance, expressions for input power factor,
displacement factor, harmonic factor and output voltage, effect of free-wheeling
diode, triggering circuits.
Three-phase Converter: Half wave, full wave, half controlled and fully controlled
bridge converters, effect of load and source impedance, expressions for input power
factor, displacement factor, harmonic factor and output voltage,
3. AC-AC Converters: Principle of operation of cycloconverter, waveforms, 4
control technique; Introduction of matrix converter.
4. DC-DC Converters: Principle of operation of single quadrant chopper, 4
continuous and discontinuous modes of operation; Voltage and current
commutation, design of commutating components; Introduction to SMPS.
5. Inverters: Voltage source and current source inverters, Principle of operation 8
DRAFT AE-84
of single-phase half bridge and full bridge voltage source inverters, voltage
and current waveforms; Three-phase bridge inverter, 1200 and 1800 modes of
operation, voltage and current waveforms with star and delta connected RL
load; Voltage and frequency control of inverters; PWM techniques-single
pulse, multiple pulse, selective harmonic elimination, sinusoidal PWM.
6. Applications: 10
FACTS Technology: Reactive power control in power systems, transmission
system compensation, static series and shunt compensation, static shunt and
series compensators- SVC, STATCOM, TCSC, SSSC and their working
principles and characteristics. Combined series-shunt compensators –UPFC
and its applications and characteristic.
VSC-HVDC Systems: Principles and applications
Total 42

1. Mohan N., Undeland T. M. and Robbins W. P., “Power Electronics-Converters,

Applications and Design”, 3rd Ed., Wiley India, 2002.
2. Rashid M. H., “Power Electronics Circuits Devices and Applications”, 3rd Ed., Pearson
Education, 2004.
3. N.G. Hingorani and L. Gyugyi, “Understanding FACTS”, IEEE Press, 2000
4. K.R. Padiyar, “Facts Controllers In Power Transmission and Distribution”, New Age
publishers, 2013
5. HVDC power transmission system, K.R.Padiyar, NewAge Publishers,2011
EE353 ELECTRICAL MACHINES AND POWER SYSTEMS
1. Subject Code: EE-353 Course Title: Electrical Machines and Power Systems
5. Credits: 3
6. Semester: VIII
8. Pre-requisite: EE-208, EE-303, EE-304
9. Objective:To familiarize the students with electrical machines and power systems.
DRAFT AE-85
Unit Contact
No. Contents Hours
1 8
Transformers : constructional features, types, Special constructional features
– cruciform and multiple stepped cores, cooling methodology, conservators,
breather, Buchholz relay, voltage, current and impedance relationships,
equivalent circuits andphasor diagrams at no load and full load
conditions,voltage regulation, losses and efficiency, all day efficiency, auto
transformer and equivalent circuit, parallel operation and load sharing.
2 Asynchronous machines: General constructional features of poly phase 8
asynchronous motors, concept of rotating magnetic field, principle of operation,
phasor diagram, Equivalent circuit, torque and power equations, torque-slip
characteristics, losses and efficiency.
3 Synchronous machines : General constructional features, armature winding, 9
emf equation, effect of distribution and pitch factor,flux and mmf
relationship, phasor diagram, non-salient pole machine, equivalent circuit,
determination of equivalent circuit parameters by open and short circuit
tests, voltage regulation using synchronous impedance method, power angle
characteristics
4 Single line diagram of power system, brief description of power system elements, 9
synchronous machine, transformer, transmission line, bus bar, circuit breaker and
isolator. Supply System:different kinds of supply system and their comparison,
choice of transmission voltage. Transmission Lines:configurations, types of
conductors, resistance of line, skin effect
5 Transmission lines: Calculation of inductance and capacitance of single phase, 8
three phase, single circuit and double circuit ,transmission lines, representation and
performance of short, medium and long transmission lines, Ferranti effect,surge
impedance loading.
Total 42
11.Suggested Books
1 Fitzgerald. A.E., Charles KingselyJr, Stephen D.Umans, ‘Electric Machinery’, Tata McGraw
Hill, 2006.
2 M.G. Say, ‘Performance and Design of Alternating Current Machines’, CBS
Publishers, New Delhi, 2008
3 Nagrath I. J and Kothari D.P. ‘Electric Machines’, Tata McGraw Hill Publishing
Company Ltd, 2010.
4 Power System Analysis, J. Grainger and W.D. Stevenson, TMH, 2006.
5 Electrical Power Systems,C. L.Wadhwa, New age international Ltd. Third Edition,
2010
6 Electric Power Generation, Transmission&Distribution,S.N.Singh, PHI Learning, 2008.
EE-355 INSTRUMENTATION SYSTEMS
DRAFT AE-86
1. Subject Code: EE-355 Course Title: Instrumentation Systems
5. Credits: 3
6. Semester: VIII
9. Objective:To familiarize the students with instrumentation systems.
Unit Contact
No. Contents Hours
1 Transducers-I:Definition, advantages of electrical transducers, classification, 8
characteristics, factors affecting the choice of transducers, strain gauges,
resistance thermometer, thermistors, thermocouples, LVDT, RVDT
2 Transducers-II:Capacitive, piezoelectric, Hall effect and opto electronic 8
transducers. measurement of motion, force, pressure, temperature flow and
liquid level.
3 Telemetry:General telemetry system, land line & radio frequency 8
telemetering system, transmission channels and media, receiver & transmitter.
Data Acquisition System:A/D and D/A converters, analog data acquisition
system, digital data acquisition system, modern digital data acquisition system
and signal conditioning.
4 Display Devices and RecordersDisplay devices, storage oscilloscope, DSO, 8
spectrum analyzer, digital recorders.RecentDevelopments:Introduction to
virtual and intelligent instrumentation, fibre optic transducers, smart sensors,
smart transmitters, process instrumentation diagrams.
5 Programmable Logic Controllers :Evolution of PLC-sequential and 10

programmable controllers, architecture and programming of PLC, relay logic
and ladder logic, functional blocks, communication networks for PLC, field
bus, profi-bus, mod-bus
Total 42

1 Electronic Instrumentation and Measurement Techniques, W.D. Cooper and A.D. Helfrick,
Prentice Hall International, 2009.
2 Measurement Systems Application and Design Ernest Doebelin, McGraw- Hill Higher
Education, 5th edition , 2003
DRAFT AE-87
3 Instrumentation, Measurement and Analysis, B.C. Nakra& K. Chaudhry, Tata McGraw
Hill, 2nd Edition, 2001.
4 Advanced Measurements and Instrumentation, A.K. Sawhney, DhanpatRai& Sons,
2010
5 Process Control Instrumentation Technology, Curtis D. Johnson, Pearson, 6th edition,
1999
6 Programmable Logic Controllers, Frank D. Petruzella McGraw-Hill Higher Education,
4th edition, 2010
EE357 UTILIZATION OF ELECTRICAL ENERGY
1. Subject Code: EE-357 Course Title: Utilization of Electrical Energy

5. Credits: 3
6. Semester: VIII
9. Objective: To familiarize the students with the concept of electrical power, energy and its utilization.
Unit Contact
No. Contents Hours
1. Illumination: Definition:- Luminous flux, solid angle, luminous intensity, illumination, 10
luminous efficiency, depreciation factor, coefficient of utilization, space to height ratio,
reflection factor, glare, shadow, lux. Nature of light, visibility spectrum curve of relative
sensitivity of human eye and wave length of light, Review of laws of illumination, Different
types of lighting sources and their use in domestic, street and industrial lighting, Energy
considerations. LED’s and their driving circuits.
2 Electric Heating : Advantages of electrical heating, Heating methods: Resistance heating – 08
direct and indirect resistance heating, properties of resistance heating elements, Induction
heating; principle of core type and coreless induction furnace, Electric arc heating; direct and
indirect arc heating, construction, working and applications of arc furnace, Dielectric heating,
applications in various industrial fields, Infra-red heating and its applications, Microwave
heating
3. Electric Welding: Introduction to electric welding, Welding methods, Principles of resistance 08
welding, types – spot, projection seam and butt welding and welding equipment used, Principle
of arc production, electric arc welding, characteristics of arc, Design of Power supply and
welding control circuit, comparison between AC and DC arc welding, welding control.
4. Electrolytic Processes: Need of electro-deposition laws of electrolysis, process of electro- 08
deposition - clearing, operation, deposition of metals, polishing, buffing equipment and
accessories for electroplating factors affecting electro-deposition , principle of galvanizing
DRAFT AE-88
and its applications, anodising and its applications, electroplating on non-conducting materials,
manufacture of chemicals by electrolytic process, electrolysis for water purification
5. Refrigeration and Air Conditioning and Water Coolers: Principle of air conditioning, vapour 08
pressure, refrigeration cycle, eco-friendly refrigerants, description of electrical circuit used in
a) refrigerator, b) air-conditioner, and c) water cooler, variable speed drive for compressors,
high speed compressors, insta-chill, Peltier effect, thermoelectric cooling, sterling engines,
solar concentrator heating and cooling,
Total 42
11. Suggested books:

1. Dubey G. K., “Fundamentals of Electric Drives”, 2nd Ed., Narosa Publishing House,2007.
2. Taylor E. O., “Utilization of Electric Energy (in SI units)”, Orient Longman, Revised in S.I. units by Rao,
V.V.L,1999
3. Hancock N. N., “Electric Power Utilisation”, Wheelers,1979.
EE-359 NON-CONVENTIONAL ENERGY SYSTEMS
1. Subject Code: EE-359 Course Title: Non-conventional Energy Systems

5. Credits: 3
6. Semester: VIII
9. Objective: To familiarize the students with the non-conventional sources of energy and their integration
to the grid.
Unit Contact
No. Contents Hours
1 Introduction to Non Conventional Energy Systems 10
Various non-conventional energy resources Introduction, availability, classification,
relative merits and demerits. Solar Cells: theory of solar cells, solar cell materials, solar
cell array, solar cell power plant, limitations. Solar Thermal Energy: solar radiation, flat
DRAFT AE-89
plate collectors and their materials, applications and performance, focusing of collectors
and their materials, applications and performance, solar thermal power plants, thermal
energy storage for solar heating and cooling, limitations.
2 Geothermal Energy 8
Resources of geothermal energy, thermodynamics of geo-thermal energy conversion,
electrical conversion, non-electrical conversion,environmental considerations.
Magneto-hydrodynamics (MHD):principle of working of MHD power plant,
performance and limitations.
3 Fuel Cells: Basic principle of working, various types of fuel cells, performance and 8
limitations.
4 Thermo-electrical and thermionic conversions 8
Principle of working of thermo-electrical and thermionic conversions, performance and
limitations. Wind energy: wind power and its sources, site selection criteria, momentum
theory, classification of rotors, concentrations and augments, wind characteristics,
performance and limitations of wind energy conversion systems.
5 Energy from Bio-mass, Ocean Thermal, Wave and bio-waste 8
Availability of bio-mass and its conversion principles, ocean thermal energy conversion
principles, performance and limitations, wave and tidal energy conversion principles,
performance and limitations, bio-waste recycling power plants.
42
11. Suggested books:

1 Renewable Energy Resources, John Twidell, Tony Weir, Taylor and Francis, 2nd
edition,2005.
2 Solar Engineering of Thermal Processes,John A. Duffie, William A. Beckman, John Wiley &
Sons, 4th edition,2013.
3 Biofuels, Solar and Wind as Renewable Energy Systems: Benefits and Risks,D.
Pimentel, Springer,1st edition,2010.
4 Solar Photovoltaic Technology and Systems: A Manual for Technicians, Trainers and
Engineers,Chetan Singh Solanki, PHI Learning,2013.
5 Non Conventional Energy Resources, D.S. Chauhan, New Age International Pvt Ltd.,2006
EE-361 EMBEDDED SYSTEMS

1. Subject Code: EE-361 Course Title: Embedded Systems
5. Credits: 3
6. Semester: VIII
DRAFT AE-90
9. Objective:To familiarize the students with the concepts of embedded systems.
Unit Contact
No. Contents Hours
1. Embedded Processing – Evolution, Issues and Challenges; 1
2 System and Processor Architecture : von Neumann, Harvard and their variants 2
3 Memory Architecture and Devices; Input-Output Devices and Mechanisms 5
4 Instruction Set and Addressing Modes, Interfacing of Memory and Peripheral 6
Devices – Functional and Timing Issues
5 Application Specific Logic Design using Field Programmable Devices and 2
ASICs
6 Analog to Digital and Digital to Analog Converters 2
7 Bus I/O and Networking Considerations, Bus and Wireless Protocols 4
8 Embedded Systems Software : Constraints and Performance Targets 2
9 Real-time Operating Systems : Introduction, Scheduling in Real-time 4
Operating Systems
10 Memory and I/O Management : Device Drivers 2
11 Embedded Software Development : Flow, Environments and Tools 2
12 System Specification and Modelling 2
13 Programming Paradigms 2
14 System Verification 2
15 Performance Analysis and Optimisation : Speed, Power and Area 4
Optimisation, Testing of Embedded Systems
Total 42

1. S. Heath, “Embedded Systems Design”, Elsevier India,2005
2. M. Ben-Ari, “Principles of Concurrent and Distributed Programming”,
Pearson,2005
3. Jane Liu, “Real Time Systems”, Pearson,2002
EN-351 ENVIRONMENTAL POLLUTION AND E –WASTE

MANAGEMENT
1. Subject Code: EN-351 Course Title: Environmental Pollution & E- Waste Management
3. Examination Duration (ETE) (Hrs.): Theory: 3 Hrs. Practical: 0
5. Credits: 3
6. Semester:VI
DRAFT AE-91
9. Objective: The overall aims of the course are for students to acquire understanding of the new and
emerging contaminants from various industrial processes and their transformation products.
Studying emerging environmental issues related to newer methods of manufacture of industrial
products.
No. Hours
1 UNIT-I 9
New and emerging pollutants and related transformation products, Effects & risks
of emerging contaminants on ecosystems and humans, Persistent pollutants.
Analytical methods for identifying emerging pollutants and the products of their
transformation
2 UNIT-II 9
Micro pollutants- Pesticides, Pharmaceutical - Veterinary and human drugs,
personal care products, Surfactants and surfactant metabolites, Flame retardants,
Industrial additives and agents.Emerging pollutants’ toxicity, and their water-
related characteristics (degradability, solubility, sorption…)
3 UNIT-III 8
Emerging Issues - E-waste, Hazardous Waste, Nuclear Waste, Nano pollution,
Thermal Pollution, pollutant emission and treatment
4 UNIT-IV 8
Emerging pollutants’ emergence and fate in surface and ground water, as well as
mathematical modelling, Sustainable Development, Risk mitigation
5 UNIT-V 8
Transformation Products of Emerging Contaminants in the Environment,
Removal of emerging contaminants from water, soil and air, methods and
preventive measures.
Course Outcome:
1. Introduction to new and emerging contaminants and their transformation products.
2. Study of pollutants from manufacturing of goods.
3. Emerging area in environmental pollution.
4. Study of life cycle of a contaminant, modeling and mitigation.
11.Suggested Books:
1. G. Buttiglieri, T.P. Knepper, (2008), Removal of emerging contaminants in

Wastewater Treatment: Conventional Activated sludge Treatment, Springer-Verlag
Berlin Heidelberg, HdbEnvChem, vol. 5, Part S/2:1-35, DOI: 10.1007/698_5_098
2. Alok Bhandari; Rao Y. Surampalli; Craig D. Adams; Pascale Champagne; Say Kee
Ong; R. D. Tyagi; and Tian Zhang, Eds., (2009) Contaminants of Emerging
Environmental Concern, American Society of Civil Engineers, ISBN (print): 978-0-
7844-1014-1, ISBN (PDF): 978-0-7844-7266-8
3. Dimitra A. Lambropoulou, Leo M. L. Nollet Eds. () Transformation Products of
Emerging Contaminants in the Environment: Analysis, Processes, Occurrence,
Effects and Risks, 1st Edition, Wiley, ISBN-13: 978-1118339596, ISBN-10:
1118339592
DRAFT AE-92
EN353 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT
1. Subject Code: EN- 353 Course Title: Occupational Health and Safety Management
3. Examination Duration (ETE) (Hrs.): Theory 3 Hrs
5. Credits: 3
6. Semester: V
7. Subject Area: UEC 8.
8. Prerequisite: Nil
9. Course Objectives:
1. Introduction about occupational health and related issues.
2. To give a basic idea about environmental safety management, industrial hygiene.
3. To introduce about training cycle, chemical hazards and control measures.
4. To aware and provide knowledge about ergonomics and different disorders.
5. To provide knowledge about different standards related to safety and health.
10. Detail of Course:

no. Hours
1 UNIT –I 8
Definition of Occupational Health as per WHO/ILO. Occupational Health and
Environmental Safety Management – Principles practices. Common
Occupational diseases: Occupational Health Management Services at the work
place. Pre-employment, periodic medical examination of workers, medical
surveillance for control of occupational diseases and health records.
2 UNIT –II 8
Occupational Health and Environment Safety Management System, ILO and
EPA Standards. Industrial Hygiene: Definition of Industrial Hygiene, Industrial
Hygiene: Control Methods, Substitution, Changing the process, Local Exhaust
Ventilation, Isolation, Wet method, Personal hygiene, housekeeping and
maintenance, waste disposal, special control measures.
3 UNIT –III 9
Element of training cycle, Assessment of needs. Techniques of training, design
and development of training programs. Training methods and strategies types of
training. Evaluation and review of training programs. Chemical Hazard:
Introduction to chemical hazards, dangerous properties of chemical, dust, gases,
fumes, mist, Vapours, Smoke and aerosols. Evaluation and control of basic
hazards, concepts of dose response relationship, bio-chemical action of toxic
substances. Concept of threshold, limit values.
DRAFT AE-93
4 UNIT –IV 9
Occupational Health Hazards, Promoting Safety, Safety and Health training,
Stress and Safety, Exposure Limit. Ergonomics-Introduction, Definition,
Objectives, Advantages. Ergonomics Hazards. Musculoskeletal Disorders and
Cumulative Trauma Disorders. Physiology of respiration, cardiac cycle, muscle
contraction, nerve conduction system etc. Assessment of Workload based on
Human physiological reactions. Permissible limits of load for manual lifting and
carrying. Criteria or fixation limits.
5 UNIT –V 8
Bureau of Indian standards on safety and health 14489 - 1998 and 15001 – 2000,
OSHA, Process Safety Management (PSM) as per OSHA, PSM principles,
OHSAS – 18001, EPA Standards, Performance measurements to determine
effectiveness of PSM. Importance of Industrial safety, role of safety department,
Safety committee and Function.
Course Outcomes:
1. The student will be able to understand the basics of occupational health and related issues.
2. Understanding of the fundamental aspects of safety, industrial hygiene along with learning theory
to safety training methodology.
3. Considerate about hazardous materials, emergency management, ergonomics and human factors
4. Able to understand the adverse effects of hazards and develop control strategies for hazardous
conditions and work practices
5. Learn about Indian standards of health and safety and able to apply applicable standards,
regulations and codes.
11.Suggested Books:
1. Handbook of Occupational Health and Safety, NIC, Chicago, 1982.
2. Encyclopedia of Occupational Health and Safety, Vol. I and II. International Labour
Organisation, Geneva, 1985.
3. Accident Preventional Manual, NSC Chicago, 1982.
4. Henrich, H.W., Industrial Accident Prevention, McGraw Hill, 1980.
EN-355 GIS & REMOTE SENSING

1. Subject Code: EN-355 Course Title: GIS & Remote Sensing
3. Examination Duration (ETE) (Hrs.): Theory 3 Hrs
4. Relative Weightage: CWS 25 PRS 0 MTE 25 ETE 50 PRE 0
5. Credits: 3
6. Semester:V
8. Prerequisite: Nil
9. Course Objectives:
DRAFT AE-94
1)Introduce GIS and its significance in engineering and science.
2) To familiarize students with GIS data and its applications.
3) To familiarize students about the basics of remote sensing and its multi concepts.
4) To disseminate knowledge about sensors and different kind of resolution in the area of remote
sensing.
5) To familiarize students about the diverse applications of remote sensing.
10. Detail of Course:
no. Hours
1 Unit-1: Geographic Information System 7
Introduction, Definition of GIS, Components of GIS, Input data for GIS,
Geographical concepts
2 Unit-2:GIS Data 9
GIS data types, Data representation, Data sources, Geo-referencing of GIS data,
GIS database, Database Management System, Data analysis terminology, GIS
software packages, GIS application
3 Unit-3:Remote Sensing 8
Introduction to Remote Sensing and Remote Sensing System, Multi concept of
remote sensing, Advantages and disadvantages of remote sensing,
Electromagnetic radiation, Polarisation, Thermal radiation
4 Unit-4:Remote Sensing Platforms 9

Important remote sensing satellites, Classifications of sensors and platforms,
Passive and Active sensors, Major remote sensing sensors, Spatial resolution,
Spectral resolution, Radiometric resolution, Temporal resolution, Glopal
Positioning System
5 Unit-5:Application of Remote Sensing 9
Digital Image Processing, Application of Remote Sensing in Land use and Land
cover mapping, Ground water mapping, Urban growth studies, Wasteland
mapping, Disaster management, Agriculture, Forestry application
Course Outcomes:
1. The Student will learn about basics of GIS and its significance.
2. The Student will be able to understand the utility of GIS data as well as Data Management System.
3. The Student will learn the fundamentals of remote sensing.
4. The unit of Remote Sensing Platform will generate a clear cut understanding among students
about the satellites, their functioning and Global Positioning System. Geographical information
system, its components, DMS and its various applications in real life.
5. The Student will be able to attain thorough knowledge about the application of remote sensing in
different areas.
DRAFT AE-95
11.Suggested Books:
1. Fundamentals of Remote Sensing – George Joseph, University Press, Hyderabad,
India.
2. Remote Sensing and Geographical Information System – AM Chandra & SK Ghosh
Narosa Publishing House, New Delhi.
3. Concepts and Techniques of Geographic Information Systems – C. P. Lo & Albert
K.W. Yeung, PHI Learning Private Limited, New Delhi.
4. Geographic Information System – Kang Tsung Chang, Tata Mc Graw hill, Publication
Edition, 2002.
EP351 PHYSICS OF ENGINEERING MATERIALS

1. Subject code: EP351 Course title: Physics of Engineering Materials
3. Examination Duration (Hrs): Theory: 3 Practical: 0
5. Credits: 3
6. Semester: ODD
7. Subject area: UEC
9. Objective: To familiarize the fundamentals /basic concepts and advances of
the different materials keeping in view of the engineering
applications. There is ample opportunity to become involved in
cutting edge Materials Science and Engineering Research
10.Detail of Course:

No. Hours
1. Crystallography:
Introduction to crystal physics,Space lattice, Basis and the Crystal structure,
Bravais lattices; Miller indices, simple crystal structures,Interplanar spacing, Intra
and Intermolecular bonds (Ionic, Covalent, Metallic, Van der Waals and Hydrogen 10
Bond), Defects in crystals, Basics of X- ray diffraction and its applications
2. Semiconductors:
Band theory of solids, Intrinsic and Extrinsic semiconductors, Statistics of electrons and
holes in intrinsic semiconductor, Hall effect, Effect of temperature on conductivity, 10
Generation and recombination, drift and diffusion current, Einstein relation, Applications
of Semiconducting Materials.
DRAFT AE-96
3. Dielectric and Magnetic Materials
Dielectric Materials: Dielectric polarization and dielectric constant, Various
polarization processes, Applications of Dielectric Materials 07
Magnetic Materials: Concept of Magnetism, Classification of dia-para, Ferro,
Antiferro and Ferrimagnetism, ferrites, soft and hard magnetic materials,
Applications of Magnetic Materials
4. Superconductivity:
Introduction and historical developments; General properties of super conductors, 07
Meissner effect and its contradiction to the Maxwell’s equation; Types of
Superconductors, London equations, Penetration depth, High Temperature
Superconductors, Applications of superconductors.
5. Advanced Engineering Materials:
Introduction, Synthesis, characterization and applications of Photonic glasses, 08
Phosphors and Nanophosphors, other selective topics in advanced materials.
Total 42
11.Suggested Books:
S. Name of Books/ Authors
No.
1. Introduction to Solid State Physics, by C. Kittel, 1996/ John Wiley & sons
2. Solid State Physics, by S. O. Pillai, 2010/ New Age International (P) Ltd.
3. Materials Science and Engineering by V. Raghavan, 2009/PHI Learning Pvt. Ltd.
4. Solid State Physics, N. W. Ashcroft and N. D. Mermin, 1976/ HBC Publication
5. Engineering Materials Science by Milton Ohring, 1995/Academic Press
6. Material Science and engineering: An Introduction By W. D. Callister Junior, 2007/ John
Wiley & Sons, Inc
7. Handbook of Electronic and Photonic Materials by SafaKasap, Peter Capper (Eds.),
2006/Springer
EP353 NUCLEAR SECURITY

1. Subject code: EP353 Course title: Nuclear Security
3. Examination Duration (Hrs): Theory: 3 Practical: 0
4. Relative Weight: CWS: 25, PRS:--, MTE: 25, ETE: 50, PRE: --
5. Credits: 4
6. Semester: EVEN/ODD
7. Subject area: UEC
8. Pre-requisite: Basic knowledge of Nuclear Physics
9. Objective: This course will provide basic understanding of Nuclear Security
which is essential for establishing nuclear culture in the society
10. Detail of Course:5th/6th Semester
S. Contents Contact
No. Hours
DRAFT AE-97
1. Introduction to nuclear security: Basics of nuclear security, Practice and 08
culture, Background, Objective, Scope, Structure, Nuclear security and safety
culture: Characteristics of nuclear security culture
2. Nuclear security regime, Importance of human factor and management 07

leadership in nuclear security, Nuclear security threats: Threat informed
security, The design basis threat
3. System characterization, PPS requirements and objectives: Facility 06
characterization, Target identification, Consequence analysis, PPS
performance objectives
4. Physical protection system technologies: Intrusion detection, Exterior and 09
Interior Sensors, Access control, Contraband detection, Field detection sensors
at borders/major public Events, Alarm assessment, Communication and
display, Access delay, Response and neutralization, Response strategies and
impact of On and Off site response, Cyber security.
5. Security system design and evaluation: Adversary path analysis and Multi path 08
optimization, Scenario development, Insider analysis, Transportation, Design
approaches and vulnerability assessments, System design at major public
events, Design of security systems to interrupt illicit trafficking, Analysis of
quantitative risk assessment methods.
6. Consequence mitigation and event response: Consequence management 04

following nuclear events, Analysis of deterrence value of security measures,
Roles and responsibilities of institutions and individuals
Total 42
11.Suggested Books
S. Name of Books/ Authors

No.
1. Nuclear security briefing book, by Wyn Bowen, Matthew Cottee, Chris Hobbs, Luca Lentini
and Matthew Moran, 2014/King’s College, London, UK
2. IAEA Nuclear Security Series No. 13, Nuclear Security recommendations on physical
protection of nuclear material and nuclear facilities by IAEA, 2011/International Atomic
Energy Agency (IAEA)
3. The International Legal Framework of Nuclear Security: IAEA International law
series No. 4 by IAEA, 2011/International Atomic Energy Agency (IAEA)
4. Seeking Nuclear Security Through Greater International Cooperation by Jack Boureston and
Tanya Ogilvie-White, 2010/Council on Foreign Relations (CFR’s) International Institutions
5. Book Review: South Asia’s Nuclear Security by Bhumitra Chakma , 2015/Oxon, UK,
Routledge
HU351 ECONOMETRICS
1. Elective Paper - Econometrics
DRAFT AE-98
During Subject Open for Branches Per week- L- During
Code T-P semester
Odd semester 351 MC, CE, EN, BT, EP, PS 3-0-1 5 th
Even semester 352 EE, EL, CO, SE, AE, ME, 3-0-1 6 th
PE
(Note: i. History of this subject in DTU is different from other subjects. This subject was demanded by the
students in final year. It is supported by the placement data also that number of non-technical companies visiting
campus for recruitment is increasing over year.
2. Examination Duration: 3 Hrs.
3. Relative Weightage- will be decided at University level
4. Credits: 3 (Four)
5. Semester: Fifth and Sixth Semester
6. Subject Area: UEC Economics (Social Science)
7. Pre-requisite- Nil
Syllabus Hours ( Total - 56)
1 Introduction Hrs
1.1 What is Econometrics? Why a separate discipline? How it is different from 6
Mathematical Economics, Type of Data, Sources of data
1.2 Estimating Economic Relationship, Methodology of Econometrics
1.3 Matrix and its Economic Application
2 Review of Calculus 12
2.1 Differential Calculus and its application in Economics- Elasticity of demand- Price
and Cross; Profit maximization under Perfect Competition, Monopoly, Oligopoly and
Monopolistic Competition
2.2 Integral Calculus and its application in Economics - Capital Formation, Compound
Interest; Capital value and Flow Value; Consumer surplus under pure competition and
monopoly; Producers Surplus
2.3 Differential Equation and its application in Economics – Market Price Function;
Dynamic Multiplier;
3. Review of Statistics 14
3.1 Basic Ingredients of an Empirical study- Formulating a Model; Gathering data
Descriptive Statistics and its use in Business- Measure of Central Tendency: AM,
GM and HM, Median, Mode, Dispersion, Range, Quartile, standard Deviation,
Skewness, Kurtosis,
3.2 Probability - Discrete and Continuous; Probability Distribution: Binomial and
Poison distribution
3.3 Sampling techniques, Estimation and Hypothesis Testing, Interpreting the results
Mid semester
DRAFT AE-99
4. Regression 8 Hours
Statistical verses Deterministic Relationships, Regression verses Causation; Two

variable Regression Analysis; Population Regression Function (PRG), Stochastic
specification of PRF; The Significance of the Stochastic Term; stochastic
disturbance Term; the sample regression Function (SRF); Method of Ordinary Least
Squares; Properties of Least Square Estimators: The Gauss-Markov Theorem,
Coefficient of determination r2 : A Measure of “goodness of fit”; Monto Carlo
Experiments
5. Classical Normal Linear Regression Mode (CNLRM) 4 Hours
The Probability distribution of Disturbances (meu); Normality Assumption, Method

of Maximum Likelihood
Multiple regression Analysis: The Problem of estimation; The problem of Inference
Cobb-Douglas Production function; Polynomial Regression Model; Testing for
structural or Parametric stability of regression Models; the Chow test
6. Dummy Variable (DV) 6 Hours
Nature; ANOVA models; Regression with a mixture of Quantitative and Qualitative

regressors: The ANCOVA Models; DV alternative to the Chow Test; Interaction
effects using Dummy Variable; Use of DV in seasonal Analysis
7. Presentation on Application of Mathematics, Statistics, 6 hrs.
Operational Research , Computer Science or any other
related subject to discuss any Aspect of Economics
11.Suggested books
S.No. Name of Books, Authors, Publishers
1. Wooldridge Jeffrey , Introductory Econometrics, Cencage Learning- ISBN-13-
978-81-315-1673-7; ISBN-1081-315-1673-3,2014
2. Damodar N. Gujrati, Basic Econometrics, Mcgraw Hill Education (India)
Limited, Fifth Edition,2013 ISBN-978-0-07-133345-0; ISBN; 0-07-133345-2
3.
Ramu Ramanathan, Introductory Econometrics with Applications, Harcourt
Brace Jovanovich Publishers, Latest USA ISBN-
MA351 HISTORY CULTURE & EXCITEMENT OF

MATHEMATICS
1. 1 Subject code: MA351 Course title: History Culture and Excitement of Mathematics
2. Contact Hours: L-3 T-0 P-0
3. Examination Duration (Hrs) Theory: 3hrs
4. Relative weightage: CWS: 25, PRS: -MTE: 25 ETE: 50 PRE: 0
5. Credits: 3
6. Semester Odd
DRAFT AE-100
8. Pre requisite --
9. Objective: To be capable in learning the history and culture on the Mathematics subjects
No. Hours
1. Ancient, Medieval and Modern Indian Mathematics: Aryabhata, Brahmagupta, 7
Bhaskar, Lilavati, Ramanujan
2 Introduction to Ancient books of Indian Mathematicians: Sidhantas, Sulvasutras, 7
Vedic Mathematics
3 Contribution of Indian Mathematicians in the field of Mathematics: Value of Pi, 7
The symbol zero, Number theory, Trigonometry, and Mensuration, Hindu
Multiplication, Long Division, Indeterminate equation
4 Mathematicians Around the world: Newton, Leibnitz, Cauchy, Lagrange in the 7
field of Geometry, Calculus, Algebra, Probability
5 Algebra in the Renaissance: Solution of cubic equation, Ferrari’s Solution in the 7
quartic equation, Irreducible Cubics and complex numbers
6 Paradoxes, Fallacies and Pitfalls of Mathematics 7
Total 42
11.Suggested books
S.No. Name of Books, Authors, Publishers
1. History of Mathematics, by carl B Boyer, Wiley International edition, 1968.
2. Mathematics of Music, Susan Kelly, UW-L Journal of under graduate research,
Vol-XIV, 2011.
ME 351 POWER PLANT ENGINEERING

1. Subject Code: ME 351 Course Title: Power Plant Engineering
2. Contact Hours: 42 L: 3 T: 0 P: 0
5. Credits: 3
6. Semester: V
9. Objective: To familiarize the students with thermodynamic cycles and various components of power
plants.
DRAFT AE-101
S. No. Contact
Contents Hours
1 Indian energy scenario, Indian coals: formation, properties, analysis, benefication and 7
heating value calculation of coals; coking and non-coking coals, fuel handling systems;
coal gasification. Classification of power plants, base load and Peak load power stations,
co-generated power plant, captive power plant, and their fields of application & selection
criteria,.
2 Steam Generators: High pressure utility boiler, natural and forced circulation, coking 7
and non-coking coal, coal benefication, coal pulverization, pulverized fuel firing system,
combustion process, need of excess air, cyclone furnace, fluidized bed boiler, electrostatic
precipitators and wet scrubbers, boiler efficiency calculations, water treatment.
3 Combined Cycle Power Plants: Binary vapour cycles, coupled cycles, gas turbine- 7
steam turbine power plant, gas pipe line control, MHD- Steam power plant.
4 Other power plants: Nuclear power plants - working and types of nuclear reactors, 7
boiling water reactor, pressurized water reactor, fast breeder reactor, controls in nuclear
power plants, hydro power plant -classification and working of hydroelectric power
plants, tidal power plants, diesel and gas power plants.
5 Instrumentation and Controls in power plants: Important instruments used for 7
temperature, flow, pressure, water/steam conductivity measurement; flue gas analysis,
drum level control, combustion control, super heater and re-heater temperature control,
furnace safeguard and supervisory system (FSSS), auto turbine run-up system(ATRS).
6 Environment Pollution and Energy conservation: Economics of power generation: 7
load duration curves, power plant economics, pollution from power plants,
disposal/management of nuclear power plant waste, concept of energy conservation and
energy auditing.
Total 42
Suggested Books:
1 Power Plant Engineering by M.M. Elwakil, Tata McGraw Hill, ISBN- 0070662746.
2 Power Plant Engineering by P.K Nag, Tata McGraw Hill, ISBN- 0070435993.
3 Steam and Gas turbines by A Kostyuk and V Frolov, MIR Publishers, ISBN- 9785030000329.
4. Modern Power Plant Engineering by J Wiesman and R Eckart, Prentice hall India Ltd, ISBN-
97801359725.
5. Planning Fundamentals of thermal Power Plants by F.S Aschner, John Wiley, ISBN- 07065159X.
6. Applied Thermodynamics by T.D Eastop and McConkey, Longman Scientific and Technical,
ISBN- 0582305351.
7. CEGB volumes on power plant, Cwntral Electricity Generation Board, ISBN- 0080155680.
8. NTPC/NPTI publications on Power plants, ISBN- 9788132227205.
ME353 RENEWABLE SOURCES OF ENERGY

1. Subject Code: ME 353 Course Title: Renewable Sources of Energy
DRAFT AE-102
5. Credits: 3
6. Semester: V
9. Objective: To familiarize the students with renewable energy sources like solar, geothermal, wind and
tidal.
Unit Contact
No. Contents Hours
1 Man and Energy, world production and reserve of conventional energy sources, Indian 7
production and reserves, Energy alternatives
2 Solar radiation: Origin, nature and availability of solar radiation, estimation of solar 7
radiation. Photovoltaic cells. Design consideration and performance of different types of
solar cells. Flat plate, focusing collectors. Effects of receiving surface location and
orientation.
3 Devices for solar thermal collection and storage. Energy storage devices such as water 7
storage systems, packed Bed storage systems, phase change storage systems. Heat transfer
considerations relevant to solar energy. Characteristics of materials and surfaces used in
solar energy absorption.
4 Application systems for space heating, solar water pumps, solar thermal pond, Solar 7
Thermal Power plants, solar distillation, Solar Refrigeration and solar air conditioning,
other solar energy utilization.
5 Solar PV systems. Fuel Cell Technologies. 7
Generation and utilization of biogas, design of biogas plants, Wind energy systems.
6 Geothermal Energy Systems. Tidal energy systems. Oceanic power generation. Design 7
considerations, Installation and Performance Evaluation. MHD power generations. Role
of the nonconventional energy sources in power planning.
Total 42
11.Suggested Books:
1 G. D. Rai, “Energy Technolgy”, Khanna Publishers, ISBN- 97881740907438.
2 S.P. Sukhatme, “ Solar Energy”, Tata-Mcgraw hill, New Delhi, ISBN- 0074624531.
3 “Solar Energy thermal process” JADuffie and W.A. Beckman, John Wiley& sons, New York,
ISBN- 1118418123.
4 Solar energy, Frank Kaieth& Yogi Goswami, Taylor and Francis, ISBN- 1560327146.
5 Treatise of Solar Energy, H.P. Garg, John Willey & sons, ISBN- 9027719306.
ME355 COMBUSTION GENERATED POLLUTION
DRAFT AE-103
1. Subject Code: ME 355 Course Title: Combustion Generated Pollution
5. Credits: 3
6. Semester: V
9. Objective: To introduce the students to different types of fuels, emissions from various engines,
exhaust treatment of various engines and instruments used for measuring emissions.
Unit Contact
No. Contents Hours
1 Engine fundamentals: Fuels, alternative fuels for IC engines, Type of hydro carbons. 7
Gasoline specifications. Effect of Engine parameters on performance, fuel injection for
SI engines, Engine vehicle road performance, road performance and fuel economy.
2 Emissions and air pollution: Automotive Emissions and their role in air pollution. Photo- 7
chemical smog. Chemistry of smog formation. Combustion in Homogeneous mixtures,
emission formation. Incomplete combustion, formation of hydro-carbons, Carbon
monoxide and oxides of nitrogen, Aldehyde emissions.
3 Influence of design and operating variables on gasoline engine exhaust emissions. 7
Hydrocarbon Evaporative Emissions: Various sources and methods of their control.

Canisters for controlling evaporative emissions. Emission control systems for gasoline
engines: Blow by control closed PCV system design.
4 Exhaust treatment devices: Air injection into exhaust system. 7
5 Thermal reactors, Catalytic convertor. 7
Stratified charge engines. Honda CVCC engine.
Diesel engine combustion Emissions: Sources of emissions during combustion. Effect of

air fuel ratio, speed, injection timing on performance and emission formation. D.I and
I.D.I engine emissions.
6 Methods of reducing emissions, exhaust gas recirculation, smoke emission from diesel 7
engines.
Emission Instruments: Non- dispersive Infrared analyzer, Gas chromatograph, flame

ionization detector, chemiluminescent analyzer
Total 42
11.Suggested Books:
1 Combustion generated air pollution, Earnest S Starkman, Springer, ISBN- 9780306305302.
2 Fundamentals of Air pollution engineering, Richard C. Hagan, Prentice Hall, ISBN- 0133325371.
DRAFT AE-104
3 Air pollution threat & response, David Alym, Addison-Wesley Publication, ISBN- 0201043556.
ME357 THERMAL SYSTEM

1. Subject Code: ME 357 Course Title: Thermal System
5. Credits: 3
6. Semester: V
9. Objective: To familiarise the students with the process of thermodynamic analysis of engineering
systems and to enhance critical thinking and provide them with a wider view to handle engineering
problems.
S. No. Contact
Contents Hours
1 Fundamentals: properties of pure substance in Solid, Liquid and Vapour Phases, PVT 7
Behavior of simple compressible system, T-S and H-S diagram, Steam Tables,
determination of quality of steam, Throttling Calorimeter, Combined Separating &
Throttling Calorimeter, Maxwell and other thermodynamics relations, mixture of non
reactive ideal gases, Real gases, Compressibility chart, Law of corresponding state, Air
water vapor mixture, calculation of properties of air water vapour mixture.
2 Rankine Cycle And Analysis: Rankine cycle and its representation on T-S and H-S 7
diagrams; Effect of low backpressure and high entry pressure and temperature and its
limitations; necessity of re-heating, ideal and actual regenerative feed water heating
cycle and its limitations. Typical feed water heating arrangements for various capacity
power plants.
3 Introduction To Boilers: Classification of Boilers, Boiler mountings and accessories; 7
draft systems, circulation system; Combustion and its calculations, and Boiler
performance.
4 Steam Nozzles: Types of Nozzles, Flow of steam through nozzles; Condition for 7
maximum discharge through nozzle; Nozzle efficiency. Effect of friction and
Supersaturated flow through nozzle.
5 Steam Turbines : Working principle and types of steam turbines; Velocity diagrams for 7
impulse and reaction turbines, compounding of impulse turbines; Optimum velocity ratio
and maximum efficiency. Comparison of impulse and reaction turbines. Condition line
and reheat-factor, losses in steam turbines; governing of steam turbines.
6 Condensers and Cooling towers: Types and working of condensers, types and 7
performance of cooling towers.
Total 42
11.Suggested Books:
DRAFT AE-105
1 Engineering Thermodynamics by P.K.Nag, Tata McGraw Hill Publishing Company Limited, ISBN
– 1259062562, 2013.
2 Engineering ThermodynamicsbyRogers, Pearson Education, ISBN- 631197036.
3 Thermodynamics by Kenneth Wark, Mcgraw-hill Book Company, 5th edition, ISBN- 0070682860,
1988.
4. Engineering Thermodynamics: work and heat transfer by Gordon Rogers and Yon Mayhew,
Longman, 4th edition, ISBN – 0471861731, 1992.
5. Fundamentals of Classical Thermodynamics by Van Wylen and Sonntag, John Wiley & Sons Inc.,
3rd edition, ISBN – 0471861731, 1986.
6. Fundamentals of Engineering Thermodynamics by Moran and Shaprio, John Wiley & Sons, Inc.,
7th edition, ISBN – 0470917687, 2010.
7. Thermodynamics: An Engineering Approach by Cengel and Boles, The McGraw-Hill Companies,
8th edition, ISBN: 0073398179, 2014.
8. Applied Thermodynamics for Engineering TechnologistsbyT.D. Eastop, Prentice Hall, 5th edition,
ISBN- 05820919344, 1993.
9. Treatise on Heat Engineering by V. P.Vasandani and D.S. Kumar, Metropolitan Book Co. (p) Ltd.,
ISBN- 810003500.
ME359 REFRIGERATION & AIR CONDITIONING

1. Subject Code: ME 359 Course Title: Refrigeration and Air Conditioning
5. Credits: 3
6. Semester: V
9. Objective: To learn properties of different refrigerants, and thermodynamic cycles of refrigeration.To
understand comfort parameters and air conditioning.
Unit Contact
No. Contents Hours
1 Introduction to Refrigeration: 7
Necessity and applications, unit of refrigeration and C.O.P., types of Ideal cycles of
DRAFT AE-106
refrigeration, air-refrigeration, bell coleman cycle, open and dense air systems, actual air-
refrigeration system problems, refrigeration needs of aircrafts, actual refrigeration system
2 Vapour Compression Refrigeration: 10
Working principle and essential components of the plant, simple vapour compression
refrigeration cycle - COP, Representation of cycle on T-S and p-h charts - effects of sub
cooling and super heating - cycle analysis - Actual cycle, Influence of various parameters
on system performance – necessity of multistaging, multistage compression system, and
their analysis, necessity and working of cascading system
3 Refrigerants and Absorption Refrigeration: 4
Desirable properties of refrigerants, classification of refrigerants used, nomenclature,
ozone depletion, global warming, vapor absorption system, calculation of max COP.
4 Air Conditioning: 7
Psychometric properties & processes, comfort air-conditioning, summer and winter air-
conditioning, cooling & dehumidification systems, load calculation and applied
psychrometry.
5 Human Comfort: 7
Requirements of human comfort and concept of effective temperature, comfort chart,
comfort air-conditioning, requirements of industrial air-conditioning, air-conditioning
load calculations.
6 Control: 7
Refrigeration and air-conditioning control, air handling, air distribution and duct design
Total 42
11.Suggested Books:
1 Refrigeration and Air Conditioning by C. P. Arora, Tata McGraw Hill, ISBN- 9788120339156.
2 Refrigeration and Air Conditioning by A. R .Trott and T. C. Welch, Butterworth- Heinemann,
ISBN- 9780080540436.
3 Refrigeration and Air ConditioningTechnology by Whitman, Jhonson and Tomczyk, Thomson
Delmer Learning, ISBN- 1111644470.
4 Refrigeration and Air Conditioning by Abdul Ameen, Prentice Hall of India Ltd, ISBN-
9789303206560..
5 Basic Refrigeration and Air Conditioning by P. N. Ananthanarayan, Tata McGraw Hill, ISBN-
9789383286560.
6 Refrigeration and Air Conditioning by Wilbert F. Stoecker and Jerold W. Jones, Tata McGraw Hill,
ISBN- 007061623X.
7 Refrigeration and Air Conditioning by Richard Charles Jordan, Gayle B. Priester, Prentice hall of
India Ltd, ISBN-9780406269313.
8 ASHRAE Handbook – Refrigeration 2010, ISBN- 9781933742922.
ME361 INDUSTRIAL ENGINEERING

1. Subject Code: ME361 Course Title: Industrial Engineering
DRAFT AE-107
5. Credits: 4
6. Semester: V
9. Objective: To make students aware of industrial engineering concepts of work study and measurement,
quality control and reliability etc.

Unit Contact
No. Contents Hours
1 Introduction 7
Introduction, Definition and objectives of Industrial Engineering, Scope of Industrial
Engineering, Production systems and their classifications; Productivity-Total and partial
productivity, Reasons and remedy for poor productivity
2 Job analysis and Work Measurement Systems 7
Work System Design: Taylor’s scientific management, Gilbreth’s contributions; method
study, micro-motion study, principles of motion economy; work measurement - stop
watch time study, micro motion and memo motion, work sampling, standard data, PMTS;
ergonomics; job evaluation, merit rating, incentive schemes, and wage administration;
business process reengineering
3 Production Planning and Control 7
Types and characteristics of production systems Objective and functions of Production,
Planning & Control, Routing, Scheduling and Operations scheduling, production
scheduling, job shop scheduling problems, sequencing problems, scheduling tools and
techniques, Loading, Dispatching and its sheets & Gantt charts
4 Quality Engineering 7
Quality concept and costs; statistical quality control, Concept of specification limits,
statistical control limits, process capability, Process control and control charts for both
attributes and variable data. Acceptance Sampling- Single and double sampling
5 Reliability and Maintenance 7
Reliability, availability and maintainability; distribution of failure and repair times;
determination of MTBF and MTTR, reliability models; system reliability determination;
Maintenance management and its objectives, Various types of Maintenance Planning,
House Keeping, 5S concepts
6 Material Handling 7
Principles, functions, and objectives of Material Handling; Selection and classification of
Material Handling Equipments; Relation of material handling with plant layout
Total 42
11.Suggested Books
1 Industrial Engineering and Management; B. Kumar, Khanna Publication, ISBN- 8174091963, 2011.
2 Introduction to work Study, International Labour Office, Geneva, 3rd edition, Oxford and IBH
publishing Co. Pvt. Ltd, New Delhi, ISBN- 8120406028, 2008.
DRAFT AE-108
3 Industrial Engineering and Management, Pravin Kumar, Pearson Education, 1st edition, ISBN-
9789332543560, 2015.
ME363 PRODUCT DESIGN & SIMULATION

1. Subject Code: ME363 Course Title: Product Design & Simulation
5. Credits: 3
6. Semester: V
9. Objective: To familiarize the students with the process of product design and development.
Unit Contact
No. Contents Hours
1 Stages in design process: 5
Introduction to various stages of the design process: Formulation of problem, Generate
alternatives, Evaluation, Guided Redesign. Case study.
2 Product life cycle: 5
New product introduction: early introduction, increased product life. Life cycle
management tool, System integration, QFD, House of quality, Pugh’s method, Pahl and
Beitz method. Case studies
3 Value engineering: Introduction, nature and measurement of value. Value analysis job 5
plan. Creativity. Value analysis test. Case studies
4 Concurrent/ reverse engineering: 5
Introduction, basic principles, components, benefits of concurrent engineering. Concept
of reengineering
5 Material selection: Materials in design. The evolution of engineering materials. Design 5
tools and material data. Material selection strategy, attribute limits, selection process,
material selection. Case studies
6 Process selection: Introduction. Process classification: shaping, joining and finishing. 5
Systematic process selection, process cost. Computer – aided process selection
7 Design for manufacture and assembly: Design for Manufacture and Assembly 4
(DFMA). Reasons for not implementing DFMA. Advantages of DFMA with case studies.
Design features and requirements with regard to assembly, Design for Manufacture in
relation to any two manufacturing processes: machining and injection molding. Need,
objectives
8 System Simulation: Techniques of simulation, Monte Carlo method, Experimental 4
nature of simulation, Numerical computation techniques, Continuous system models,
Analog and Hybrid simulation, Feedback systems, Computers in simulation studies,
Simulation software packages
9 Simulation of Mechanical Systems: Building of Simulation models, Simulation of 4
DRAFT AE-109
translational and rotational mechanical systems, Simulation of hydraulic systems
Total 42
11.Suggested Books:
TEXT BOOKS:
1 David G Ullman, “The Mechanical Design Process.” Publisher- McGrawhillIncSingapore, ISBN-
13: 9780072975741, 1992.
2 Kevin Otto & Kristin Wood Product Design: “Techniques in Reverse Engineering and new Product
Development.” 1 / e 2004 , Publisher- Pearson Education New Delhi , ISBN-13: 9780130212719,
3 L D Miles “Value Engineering.”Publisher- McGraw-Hill, 1972
4 Karl T Ulrich, Steven D Eppinger , “ Product Design &Development.”Publisher- Tata McGrawhill

New Delhi, ISBN-13: 9780078029066, 2003
5 Hollins B & Pugh S “Successful Product Design.” Publisher- Butter worths London, ISBN
9780408038614.
6 N J M Roozenberg , J Ekels , N F M Roozenberg “ Product Design Fundamentals and Methods
.”Publisher- John Willey & Sons, ISBN-13: 9780471954651, 1995.
ME365 COMPUTATIONAL FLUID DYNAMICS

1. Subject Code: ME 365 Course Title: Computational Fluid Dynamics (CFD)
5. Credits: 3
6. Semester: V
9. Objective: To provide basic concepts of CFD in terms of comprehensive theoretical study and its
computational aspects.
Unit Contact
No. Contents Hours
1 Introduction to CFD, Historical background, Impact of CFD 3
2 The Governing Equations of Fluid Dynamics 7
Derivation, Discussion of physical meanings and Presentation of forms particularly
suitable to CFD.
3 Mathematical Behavior of Partial Differential Equations: 6
Impact on CFD
4 Basic Aspects of Discretization: 12
DRAFT AE-110
Introduction to Finite Difference, Finite Elements and Finite Volume Methods.
Detailed treatment of Finite Difference method, explicit and implicit methods, errors
and stability analysis.
5 Grids with Appropriate Transformations Adaptive grids and unstructured meshes. 7
Lift reduction, down force generation and drag reduction. An introduction to the
aerodynamics of airflows for cooling.
6 Commercial codes (e.g. FLUENT etc.). Grid generation, techniques and application. 7
Basic principles and concepts and the characteristics of wings and diffusers
Total 42
11.Suggested Books:
1 Computational Fluid Dynamics”,John Anderson,” McGraw- Hill Ltd.
2 Computational Fluid Dynamics”,Tu, Elsevier.
3 Introduction to Computational Fluid Dynamics,Niyogi, Pearson Education, Delhi
ME367 FINITE ELEMENT METHODS

1. Subject Code: ME 367 Course Title: Finite Element Methods
5. Credits: 3
6. Semester: V
9. Objective: To enable students to apply Galerkin method and virtual work principle to problems in solid
mechanics. To teach them numerical solution of differential equations with finite element method.
Unit Contact
No. Contents Hours
1 Fundamental concepts of the Finite Element Method. One Dimensional 12
Problem(Bar of uniform and variable cross sections), The Galerkin Approach,
The potential –Energy Approach, shape Functions, Derivation of stiffness matrix
and load vector for the element and for the entire domain. Evaluation of
displacement, stresses and reaction forces.
2 Trusses:-. Introduction, Plane Trusses, Local and Global coordinate Systems, 3
Element Stiffness Matrix and Stress calculations
3 Two –Dimensional problem using Constant strain triangles(CST), Two- 6
dimensional isoparametric elements and numerical integration ,element
stiffness matrix, Force vector.
4 Applications of finite element method to heat transfer. 4
DRAFT AE-111
5 Application of finite element method to electrical systems. 10
6 Dynamic analysis:- Element mass matrices,Evaluation of Eigenvalues and 7
Eigenvectors.
Use of Softwares such as MAT LAB/ABAQUS/ANSYS/ NASTRAN/IDEAS.
Basic feature of these softwares.
Total 42
11.Suggested Books:
1 Finite Element Procedures, K.J. Bathe, Prentice Hall of India.
2 Finite Elements in Engineering by Chandrupatla and Belegundu.
3 Finite element Method by J.N.Reddy.
4. Finite element Method,O.C. Zienkiewicz& R.A. Taylor
5. Finite element Analysis,C.S. Krishnamurthy
6. Finite element Method, Kenneth H. Hubener
7. Finite Element Method, Desai & Abel
ME369 TOTAL LIFECYCLE MANAGEMENT

1. Subject Code: ME 369 Course Title: Total Lifecycle Management
5. Credits: 3
6. Semester: V
9. Objective: To familiarize the students with the concept of Total Life Cycle, and applying life cycle
thinking to define tradeoffs. This course also introduces to sustainability and use of renewable resources.
Unit Contact
No. Contents Hours
1 Introduction: Extensive definition of Concurrent Engineering (CE), CE design 8
methodologies, Review of CE techniques like DFM (Design for manufacture),
DFA (Design for assembly), QFD (Quality function deployment), RP (Rapid
prototyping), TD (Total design), for integrating these technologies, Organizing
for CE, CE tool box, Collaborative product development
2 Use of Information Technology: IT support, Solid modeling, Product data 8
management, Collaborative product
Commerce, Artificial Intelligence, expert systems, Software hardware
component design.
DRAFT AE-112
3 Design Stage: Lifecycle design of products, Opportunities for manufacturing 8
enterprises, Modality of concurrent engineering design, automated analysis,
Idealization control, CE in optimal structural design, Real time constraints
4 Need for PLM: Importance of PLM, Implementing PLM, Responsibility for 9
PLM, Benefits to different managers ,Components of PLM, Emergence of
PLM, Lifecycle problems to resolve, Opportunities to seize
5 Components of PLM: Components of PLM, Product lifecycle activities, 9
Product organizational structure, Human resources in product lifecycle,
Methods, techniques, Practices, Methodologies, Processes, System components
in lifecycle, slicing and dicing the systems, Interfaces, Information, Standards
Total 42
11.Suggested Books:
1 Integrated Product Development M.M. Anderson and L Hein IFS Publications
2 Design for Concurrent Engineering J. Cleetus CE Research Centre, Morgantown
3 Concurrent Engineering Fundamentals: Integrated Product Development Prasad Prentice
hall India
4 Concurrent Engineering in Product Design and Development I Moustapha New Age
International
5 Product Lifecycle Management John Stark Springer-Verlag, UK
6 Product Lifecycle Management Michael Grieves McGraw Hill
7 Concurrent Engineering: Automation tools and Technology Andrew Kusiak Wiley Eastern
ME371 VALUE ENGINEERING

1. Subject Code: ME 371 Course Title: Value Engineering
5. Credits: 3
6. Semester: V
9. Objective: To understand the concept and approaches of value analysis and engineering with an
emphasis on case studies.
Unit Contact
No. Contents Hours
DRAFT AE-113
1 An Overview Of Value Engineering-Concepts and approaches of 8
value analysis and engineering - importance of value, Function -
identity, clarify – analysis
2 Evaluation of VE-Evaluation of function, Problem setting system, 8
problem solving system, setting and solving management - decision -
type and services problem, evaluation of value
3 Results accelerators, Basic steps in using the systems 8
4 Understanding the decision environment, Effect of value analysis on 9
other work in the business- Life Cycle Cost (LCC), Case studies
5 VE Level Of Effort-VE Team, coordinator, designer, different 9
services, definitions, construction management contracts, value
engineering case studies, Effective organization for value work,
function analysis system techniques- FAST diagram, Case studies
Total 42
11.Suggested Books:
1 Parker, D.E., “Value Engineering Theory”, Sundaram publishers, 1990
2 Miles, L.D., “Techniques of Value Engineering and Analysis”, McGraw Hill Book Co.,
2nd End., 1972
3 Khanna, O.P., “Industrial Engineering and Management”, Dhanpat Rai and Sons, 1999.
MG351 FUNDAMENTALS OF FINANCIAL ACCOUNTING AND

ANALYSIS
1. Subject Code : MG351 Course Title: Fundamentals of Financial Accounting

and Analysis
2. Content Hours L: 3 T: 0 P: 0
4. Relative Weightage: CWS: 25 PRS MTE: 25 ETE : 50 PR
5. Credits: 3
6. Semester: V (ME+AE+PE+CE+ENE+BT+MC+AP+PT)/ VI (COE+IT+SE+EC+

EE+EEE)
7. Subject Area: UEC Management
9. Objective: Familiarizing the students with the financial environment of business, especially the
financial markets and acquaint them with accounting mechanics, process and system.
DRAFT AE-114
Uni Detail Contents No. Of

t Hrs.
No.
1 Introduction to Management :Basic concepts of management, 8
management process, principles of management, functions, levels,
managerial roles and skills, managerial ethics and corporate social
responsibility
2 Introduction to Financial Environment and accounting: Financial 10

Markets - Capital Markets, Basics of capital market mechanism,
instruments, financing and rating institutions. Importance, Objectives
and Principles of Accounting, Accounting Concepts and conventions,
and the Generally Accepted Accounting Principles (GAAP) Overview
of the Accounting Process. Accounting standards as Issued by Institute
of Chartered Accountants of India (ICAI).
3 Overview of Business Activities and Principal Financial Statements: 8

Observe the types of information provided by the three principal financial
statements and how firms might use this information in managing and
evaluating a business. Understand the rationale and the information value of
the statements of Balance Sheet, Profit and Loss statement, cash flows.
4 Financial Analysis-I: Distinction between cash profits and book 8

profits. Understanding the cash flow statement and the funds flow
statement.
5 Financial Analysis –II: Importance, objectives and concept of Ratio 8

Analysis- Liquidity, leverage, solvency and profitability ratios.
Total 42
11.Suggested Books
S. Name of Books / Authors/ Publishers
No.
1 Fundamental of Management, Stephen P. Robbins, David A. De Cenzo and Mary
Coulter, Pearson Education,2011, ISBN- 978-0273755869
2 Introduction to Accountancy, 10 ed., T.S. Grewal, S. Chand and Company (P) Ltd., New
Delhi,2009, ISBN- 9788121905695
3 Advance Accounts by M.C Shukla and T.S Grewal and SC Gupta, S. Chand and
Company (P) Ltd., New Delhi,1997, ISBN- 9788121902786
DRAFT AE-115
4 Financial Accounting, 4 ed, S.N. Maheshwari and S.K. Maheshwari, Vikas
Pulication,2005, ISBN- 8125918523
5 Financial Accounting Reporting & Analysis, Cengage, 7/e, W Albrecht Stice &
James Stice, Cengage Learning,2010, ISBN- 0538746955
MG353 FUNDAMENTALS OF MARKETING
1. Subject Code :MG353 Course Title : Fundamentals of Marketing

3. Examination Duration (ETE )(Hrs.): Theory: 3 Hrs Practical 0
4. Relative Weightage: CWS:25 PRS MTE:25ETE:50PR
5. Credits: 3
6. Semester: Third (ME+AE+PE+CE+ENE+BT+MC+AP+PT)/ Fourth (COE+IT+SE+EC+

EE+EEE)
9. Objective: The basic objective of this paper is to make students aware of fundamental concepts
of marketing necessary for making decisions in complex business situations by managers and
start up entrepreneurs.
Unit No. Detail Contents No. Of

Hrs.
1 Basic concepts of management: management process, 8
principles of management, functions, levels, managerial roles
and skills, managerial ethics and corporate social responsibility
2 Introduction to marketing: nature and scope of marketing, 9

marketing mix, marketing vs. sales, role of marketing in society,
interface of marketing with other departments in organization,
Customer Life Time Value, ethical issues in marketing Concept
of market segmentation: consumer and industrial, targeting and
positioning, sales forecasting
3 Product mix decisions: new product development process, test 8

marketing, concept of Product Life Cycle, product packaging
decisions
4 Pricing decisions : consideration in setting price, major pricing 9

DRAFT AE-116
strategies, promotional mix decisions: advertising, sales
promotion, personal selling, publicity, opportunities and avenues
of online promotion
5 9
Promotion and distribution decisions :design and management
of distribution channel for physical products and services,
reasons of channel conflict, handling strategies, basic challenges
in supply chain management of e-commerce firms
Total 42
11. Suggested Books
Unit Name of Books / Authors/ Publishers

No.
1 Fundamental of Management, Stephen P. Robbins, David A. De Cenzo and
Mary Coulter, Pearson Education, 2011, ISBN-978-0273755869
2 Marketing Management, 14th ed., Philip Kotler , Kevin Lane Keller, Abraham
Koshy and MithileswarJha, Pearson Education, New Delhi, 2013,(ISBN-
10: 9788131767160)
3 Marketing, 14th ed., Etzel, Bruce J Walker, William J Stanton and Ajay Pandit,
Mc Graw Hill Education, 2009, ISBN -9780070151567
4. MKTG, Charles W Lamb, Joe F Hair, Carl NcDaniel and Dheeraj Sharma,
Cengage Learning,2012, ISBN- 9788131517086
5. Marketing Management, RajanSaxena, Tata Mc Graw Hill Education, 2005,
ISBN- 9780070599536
MG355 HUMAN RESOURCE MANAGEMENT
1. Subject Code : MG355 Course Title : Human

Resource Management
4. Relative Weightage: CWS:25 PRS MTE:25 ETE:50 PR
5. Credits: 3

EE+EEE)
DRAFT AE-117
9. Objective: To develop necessary understanding in design and execution of human resource
strategies for the achievement of organization goals.
Unit Content Contact

No. hours
1. Basic concepts of management: management process, principles of 8
management, functions, levels, managerial roles and skills, managerial ethics
and corporate social responsibility
2. Introduction: Concept, nature, scope, objectives and importance of HRM; 9
Evolution of HRM; Environment of HRM; Personnel Management vs HRM.
Acquisition of Human Resources: HR Planning; Job analysis – job description
and job specification; recruitment – sources and process; selection process –
tests and interviews; placement and induction. Job changes – transfers,
promotions/demotions, separations.
3. Training and Development: Concept and importance of training; types of 8
training; methods of training; design of training programme; evaluation of
training effectiveness; executive development – process and techniques;
career planning and development.
4. Performance Appraisal: Performance appraisal – concept and objectives; 8
traditional and modern methods, limitations of performance appraisal
methods.
5. Compensation and Maintenance: Compensation: job evaluation – concept, 9
process and significance; components of employee remuneration – base and
supplementary; maintenance: overview of employee welfare, health and
safety, social security.
Total 42
11.Suggested Books
S. No Name of the book /Authors /Publishers
1 Fundamental of Management, Stephen P. Robbins, David A. De Cenzo and Mary
Coulter, Pearson Education, 2011, ISBN-978-0273755869
2 Human Resource Management, G. Dessler, B. Varkkey, Pearson prentice Hall,

2011, (ISBN – 978-81-317-5426-9)
3 International HRM a cross cultural approach, T. Jackson, Sage publications, London,

2002, (ISBN – 0-7619-7404-0)
4 HRM and Performance: Achievements and Challenges, D. E. Guest, J .Paauwe, P.
Wright, John Wiley and sons, UK, 2013, (ISBN – 978-1-118-48261-2)
5 A Handbook of Human Resource Management Practice, M. Armstrong, Kogan Page
Limited, UK, 2007 ,(ISBN – 978–0–7494–4631-4)
.
DRAFT AE-118
MG357 KNOWLEDGE AND TECHNOLOGY MANAGEMENT
1. Subject Code :MG 357 Course Title : Knowledge and Technology Management
4. Relative Weightage: CWS:25 PRS MTE:25 ETE:50 PR
5. Credits: 3

EE+EEE)
9. Objective: Preparing the students to understand how the new age organizations are leveraging on the
power of knowledge and technology. Acquiring the knowledge to address the issues faced by the
corporate world for a deeper understanding.

No. Hours
1. Basic concepts of management, management process, principles of 8
management, functions, levels, managerial roles and skills, managerial
ethics and corporate social responsibility
2. Introduction to Knowledge Management: Data, Information, Knowledge 9
Management (KM), Knowledge Society, Knowledge Economy, Types of
Knowledge, Tacit knowledge and explicit knowledge, Essential
components of KM model Building Knowledge Assets: Various
knowledge assets, Tools of Knowledge, Knowledge Audit, AAR (After
Action Review), Analyzing current knowledge state.
3. Creating Strategies for Success: KM strategy, Codification, 9
Personalization, Knowledge Management Implementation, Generating a
KM-specific vision, Integrating organizational and business goals with
KM, Choosing the right KM techniques, Relevant case studies in this
area.
4. Understanding Technology: Definition, Key concepts, Need for 8
technology, History of technological developments, Role and
importance of technology in 21st century, Recent developments in the
field of technology.
DRAFT AE-119
5. Technology-Management integration: Management as a concept, 8
Technology management, Life cycle approach to technology
management, Innovation, Creativity, Technology innovation process.
Total 42
11.Suggested Books
S. No. Name of Books /Authors/Publishers
1. Fundamental of Management, Stephen P. Robbins, David A. De Cenzo and Mary

Coulter, Pearson Education,2011, ISBN-978-0273755869
2 Knowledge Management in Organizations: A Critical Introduction, Donald Hislop,
Oxford University Press,2013, ISBN: 9780199691937.
3 The Knowledge-Creating Company: How Japanese Companies Create the Dynamics
of Innovation, IkujiroNonaka and Hirotaka Takeuchi, Oxford University Press,1995,
ISBN: 0195092694.
4 Hitotsubashi on Knowledge Management (Hardcover), Hirotaka Takeuchi and
IkujiroNonaka, John Wiley and Sons, 2004, ISBN: 0470820748.
5 Management of Technology: The Key to Competitiveness and Wealth Creation, Tarek
Khalil and Ravi Shankar, McGraw Hill Education (India) Private Limited, 2nd
Edition, 2012, ISBN: 9780070677371.
PE351 ADVANCED MACHINING PROCESS
1. Subject Code: PE-351 Course Title: Advanced Machining Process

5. Credits: 3
6. Semester: V
9. Objective: To understand basic principles of various processes and their applications. State various
parameters influencing the machining process.

No. Hours
1 Introduction, need of advanced machining processes, hybrid processes, microelectro 7
mechanical system, (MEMS), nano electromechanical systems(NEMS),Ultrasonic
micro machining - mechanics of cutting, parametric analysis, process capabilities,
applications.
DRAFT AE-120
2 Abrasive jet machining: Introduction, set ups, gas propulsion system, abrasivefeeder, 8
machining chamber, AJM nozzle, abrasive parametric analysis, processcapabilities,
applications, abrasive micro machining,
Water jet machining:Introduction, process characteristics, process performance,
applications, Abrasive Water jet machining: Abrasive finishing process: Working
principle, parametric analysis, process variables, process performance and
applications,
3 Abrasive flow machining- Working principle, parametric analysis, process variables, 10
process performance and applications, Magnetorheological abrasive flow finishing-
Working principle, parametric analysis,process variables, process performance and
applications, Magnetic float polishing,Magnetic abrasive finishing- Working
principle, parametric analysis, processvariables, process performance and applications
4 Electro discharge machining (EDM): Introduction, Working principle, 7
parametricanalysis, process variables, process characteristics, applications, hybrid
processessuch as electro discharge grinding, diamond grinding, wire EDM,
Electrodischargemicro grinding,
5 Laser beam machining- production of laser, working principle, types of laser, 8

processcharacteristics and applications. Electron beam machining: Working
principle,process parameter, process characteristics, and applications. Ion beam
machining:Working principle, process parameter, process characteristics, and
applications.
6 Plasma arc machining: Working principle, Plasma arc cutting system, applications. 2
Total 42

S. No. Title, Author, Publisher and ISBN No.
1 Advanced machining process, Dr.V.K.Jain, Allied publisher, ISBN:978-81-7319-915-8.
2 Non traditional methods of manufacturing, Shan&Pandey, ISBN, 0070965536
PE353 SUPPLY CHAIN MANAGEMENT
1. Subject Code: PE-353 Course Title: Supply Chain Management

5. Credits: 3
6. Semester: V
9. Objective: To understand the key considerations at the various stages involved in the supply of
product in order to maintain the smooth flow from source to the point of consumption so that overall
organizational performance may improve.
DRAFT AE-121
No. Hours
1 Introduction:Perspective of Supply Chain Management, Managing uncertainty, Key 6
issue in supply chain management.
2 Inventory Management and Risk Pooling: Inventory management, Classification of 8
inventory, Centralized versus Decentralized Warehousing and Risk pooling, Value of
Information, Quantification of Bullwhip effect, Causes and remedies of Bullwhip
effect.
3 Resource planning: Aggregate Production Planning- Chase and leveling strategies, 6

MRP, MRP-II, Agile manufacturing Systems
4 Procurement and Outsourcing strategies:Introduction, outsourcing benefits and 7
risks, Make/Buy decision, e-procurement, Vendor selection and quota allocation.
5 Strategic Alliances: Introduction, Third party logistics, Demand driven strategies, 8
Distribution strategies- direct shipment, cross docking, transshipment, Supplier
relationships management, Customer relationship management.
6 International Issues in Supply Chain Management: Concepts in Globalization, 7
Globalization forces, Risks and Advantages of International supply chains, Issues in
International supply chain management, Regional differences in logistics.
Total 42

1. Simchi-Levi, Kaminsky, Philip K. and ‘Designing and Managing the Supply Chain: Concepts,
Strategic and Case Studies’, McGraw-Hill/Irwin, (ISBN, 10: 0072357568, 13: 978-0072357561).
2 Supply Chain Management by Chopra and Mendle, ISBN: 9780132743952
3 Supply Chain Management: Text and Cases by JannatSah.,ISBN-10: 8131715175.
PE355 WORK STUDY DESIGN
1. Subject Code: PE-355 Course Title:Work Study Design

5. Credits: 3
6. Semester: V
9. Objective: To provide basic understanding to the students about the concept and significance of work
study and ergonomics. To impart thorough knowledge to the students about various techniques of work-
DRAFT AE-122
study for improving the productivity of an organization.

No. Hrs
1 Productivity: Definition, reasons for low productivity, methods to improve 4
productivity, Work-study and productivity
2 Human factor in work-study: Relationship of work-study man with management, 5
supervisor & workers, qualities of a work-study man.
3 Method-study: Definition, objectives, step-by-step procedure, questioning 9
techniques, charts and diagrams for recording data. Like outline process charts,
flow process charts, multiple activity charts, two handed process chart, string
diagram, travel chart, cycle graph, Chrono-cycle graph, therbligs, micro motion
study and film analysis, Simo chart, principles of motion economy. Development
and installation of new method..
4 Work-Measurement: Definition, various techniques of work-measurement work- 9
sampling, stopwatch time study & its procedure, Job selection, Equipment and
forms used for time study, rating, methods of rating, allowances and their types,
standard time, numerical problems, predetermined - time standards and standard
data techniques. Incentive: Meaning, objectives of an incentive plan, various
types of incentive plans
5 Ergonomics: Introduction, history of development, man-machine system and its 8
components. Introduction to structure of the body- features of the human body,
stress and strain, metabolism, measure of physiological functions- workload and
energy consumption, biomechanics, types of movements of body members,
strength and endurance, speed of movements. NIOSH lifting equation, Lifting
Index, Maximum acceptable Weights and Forces, Distal upper extremities risk
factors, Strain Index, RULA, REBA.
6 Applied anthropometry - types, use, principles in application, design of work 7
surfaces and seat design. Visual displays for static information, visual displays
of dynamic information, auditory, tactual and olfactory displays and controls.
Assessment of occupational exposure to noise, heat stress and dust .Effect of
vibration/ noise, temperature, illumination and dust on human health and
performance
Total 42

S. Title, Author, Publisher and ISBN No.
No.
1. Barnes Ralph M., "Motion & Time study: Design and Measurement of Work", Wiley Text Books,
ISBN-10: 8126522178, 2009.
2 Marvin E, Mundel& David L, "Motion & Time Study: Improving Productivity", Pearson
Education,ISBN-10: 0136030440, 2000.
3 Benjamin E Niebel and FreivaldsAndris, "Methods Standards & Work Design", McGraw
Hill,ISBN-101259064840, 1997.
4 International Labour organization, "Work-study", Oxford and IBH publishing company Pvt. Ltd.,
DRAFT AE-123
N.Delhi, ISBN-10 8120406028, 2001
PE357 PRODUCT DESIGN & SIMULATION
1. Subject Code: PE-357 Course Title: Product Design & Simulation

5. Credits: 3
6. Semester: V
9. Objective: To allow students to develop the technical, analytical, and managerial skills necessary to
perform the tasks successfully.
Unit Content Contact Hours
No.
1 Stages in design process: 6
Introduction to various stages of the design process: Formulation of
problem, Generate alternatives, Evaluation, Guided Redesign. Case
study.
2 Product life cycle: 6
New product introduction: early introduction, increased product life.
Life cycle management tool, System integration, QFD, House of
quality, Pugh’s method, Pahl and Beitz method. Case studies.
3 Value engineering:Introduction, nature and measurement of value. 6
Value analysis, job plan. Creativity and techniques of creativity.
Value analysis test. Case studies.
Material selection:Materials in design. The evolution of
engineering materials. Design tools and material data. Functional
material, shape and process. Material selection strategy, attribute
limits, selection process, common methods of material selection.
Case studies.
4 Concurrent/ reverse engineering: 6
Introduction, basic principles, components, benefits of concurrent
engineering. Concept of reengineering.
Process selection: Introduction. Process classification: shaping,
joining and finishing. Systematic process selection, Ranking,
process cost. Computer – aided process selection.
5 Design for manufacture and assembly:Design for Manufacture and 8
Assembly (DFMA). Reasons for not implementing DFMA. Advantages
DRAFT AE-124
of DFMA with case studies. Design features and requirements with
regard to assembly, product Design for Manufacture in relation to any
two manufacturing processes: machining and injection molding. Need,
objectives.
6 System Simulation: Techniques of simulation, Monte Carlo 10
method, Experimental nature ofsimulation, Numerical computation
techniques, Continuous system models, Analog andHybrid
simulation, Feedback systems, Computers in simulation studies,
Simulation softwarepackages.
Simulation of Mechanical Systems: Building of Simulation
models, Simulation oftranslational and rotational mechanical
systems, Simulation of hydraulic systems.
Total 42

1 Product Design and Development, “Karl T. Ulrich, Steven D. Eppinger”Mc

GrawHill.ISBN:9780072296471
2 Integrated Product and Process Development, “John M. Usher, Utpal Roy and H. R.
Parasaei.ISBN: 978-0-471-15597-3
3 Product Design for Manufacture and Assembly, “G. Boothroyd, P. Dewhurst and W.
Knight” MarceDaker.ISBN:978-1420089271
4. Engineering Design and Design for Manufacturing: A structured approach, “John R.
Dixon and CPoli” Field Stone Publishers, USA. ISBN: 9780964527201
5. Material Selection in Mechanical Design, “M. F. Ashby”Elsevier. ISBN:
9780080419077
PE359 TOTAL LIFE CYCLE MANAGEMENT

1. Subject Code: PE359 Course Title: Total Life Cycle Management
4. Relative Weight: CWS: 25 PRS: 0 MTE:25 ETE:50 PRE: 0
5. Credits: 3
6. Semester: V
9. Objective: To familiarize the students with the concept of Total Life Cycle, management of old
vehicles, applying life cycle thinking to define tradeoffs. This course also introduces to sustainability,
use of renewable resources.
DRAFT AE-125
Contents
1 Introduction : Definition of Total Life Cycle (TLC) – Conceptof 8
TLC - Life Cycle Impacts - Integrating Life Cycle Technologies-
Products and Processes Within TLC - TLC Methodology- TLC
AccessementData to Complex Products – ResultantImprovement for
Product
2 Vehicles End of Life : Design for End of Old VehicleManagement - 8
Problems of Old Vehicles in EmergingMarkets - Recovery and
Economic Feasibility of MaterialsSuch As Plastic, Rubber,
Aluminium, Steel, etc.
3 Trade-offs : Applying Life Cycle Thinking to Define 10
TradeoffsAlong the Supply, Manufacture - Use and End of Life
Chain- Effects on the Customer - Expectation of the Customer -
Evaluate Product Cost on Fuel Consumption, Emission,Durability,
Environment and Health
4 Sustainability:What Is Sustainability - Use of RenewableResources 8
- View to Design Horizon.
5 Harmonization of Environmental Goals: TLC for Emerging Vs 8
Developed Markets - Rules and Regulations to Guide Designers -
International Common Practices for End of LifeVehicles.
Total 42

1 Life Cycle Management Case Study of an Instrument Panel /SAE, 1997/
2 Accident Reconstruction: Automobiles, Tractor-semitrailers, Motorcycles, and
Pedestrians /Society of Automotive Engineers, 1987 /0898834546, 9780898834543.
PE361 TOTAL QUALITY MANAGEMENT
1. Subject Code: PE-361 Course Title: Total Quality Management

5. Credits: 3
6. Semester: V
9. Objective: To understand the philosophy and core values of Total Quality Management (TQM);
determine the voice of the customer and the impact of quality on economic performance and long-term
business success of an organization;
DRAFT AE-126
Unit Content Contact
No. Hours
1 Introduction to Quality- Definition of Quality- product, user, value, and 9
manufacturing based perspectives, Dimensions of Quality, Quality
Planning, Quality costs- optimization of quality costs, seven tools of
quality control;Philosophies of Quality Gurus- Deming, Juran, Crosby,
Feigenbaum, Ishikawa, Taguchi. Comparison of Quality Philosophies.
2 Statistical Process Control-Introduction to Quality characteristics- 8
variables and attributes, Types and causes of variations, Control Charts
for variables and attributes, Process capability.
3 Acceptance Sampling-Sampling process and lots formation; Advantages 7
and applications of acceptance sampling; characteristics of O.C. Curve;
Single, double, multiple, sequential sampling; ASN, ATI, AOQL, AOQ,
AQL, LQL, Producer’s and Consumer’s risks.
4 Six Sigma and ISO 9000:2000- Principles of Six Sigma, Statistical 6
basis, Tools and techniques, DMAIC principle, application of six sigma
in manufacturing and service organizations, structure of ISO standards,
Factors leading to ISO, Implementation and registration, Benefits of ISO.
5 Life Testing-Reliability-Life testing: objective, failure data analysis, 6
MTTF, MTBF, hazard rate, exponential and Weibull models, system
reliability-series, parallel and mixed configurations, Markov model.
6 Reliability Design and Allocation- Design for reliability, reliability 6
improvement techniques, active redundancy and standby redundancy, K-
out-of-N redundancy and maintenance policies.
Total 42

1. Evans JR,Lindsay WM, “The Management and Control of Quality”, Cengage

learning, India, ISBN-10: 8131501361, 2011
2 BediKanishka,“Quality Management”,Oxford University Press India, ISBN-
10: 0195677951, 2006
3 Besterfield,“Total Quality Management”, Pearson Education, ISBN-
10: 9332534454, 2015
4 Gryna FM, Chua RCH, Defeo JA, “Juran‟s Quality Planning and Analysis for
Enterprise Quality”, McGraw Hill Education (India) Private Limited, ISBN-
10: 0070618488, 2006
PT361 HIGH PERFORMANCE POLYMERS
1. Subject Code: PT361 Course Title: High Performance Polymers

DRAFT AE-127
5. Credits: 03
6. Semester: ODD-V
9. Objective: To impart knowledge about heat resistant polymers, liquid
crystalline polymers, conducting and other special polymers.
S. Contents Contact
No. Hours
1 Heat resistant polymers: Requirements for heat resistance, Determination 9
of heat resistance, Synthesis, Structure-property relationships, Applications
of heat resistant polymers like polyamides, polyimides and its derivatives,
polyquinolines, polyquinoxalines, PBT, PBO, PBI, PPS, PPO, PEEK,
engineering plastic blends.
2 Liquid crystalline polymers, Concept of liquid crystalline phase, Theories 9
of liquid crystallinity, Characteristics of LC state and LCPs, Rheology of
liquid crystalline polymers, Blends of LCPs, Self reinforced composites,
Applications.
3 Conducting polymers, Conduction mechanism, semi-conductors and 9
conducting polymers, Band theory, Doping of polymeric systems,
Processing and testing of conducting polymers, Applications and recent
advances in conducting polymers.
4 Synthesis and applications of photosensitive polymers, Curing reactions. 6
5 Polymers in specialty applications: Polymers in agricultural applications, 9
Green houses, Mulches, Control release of agricultural chemicals, Seed
coatings, Polymers in construction and building applications.
11. Suggested Books

S. Name of Books/Authors/Publisher
No.
1 Encyclopedia of Polymer science and Engineering Vol.1-17/ J.I. Kroschwitz, 2007
2 Additive for coatings/ John Bieleman/ Wiley-VCH, 2000.
3 Fire Properties of Polymeric Composites Materials/ A.P. Mouritz, A G. Gibson/
Springer, 2006.
4 Modern Biopolymers science: Bridging the divide between fundamentals treatise and
industrial application/S. Kasapis, I.T. Nortan, J.B. Ubbink/ Elsevier 2009
PT363 SEPARATION TECHNOLOGY
DRAFT AE-128
1. Subject Code: PT363 Course Title: Separation Technology
5. Credits: 03
6. Semester: ODD-V
9. Objective:
No. Hours
1 Separation factors and its dependence on process variables, classification 7
and characterization, thermodynamic analysis and energy utilization,
kinetics and mass transport, Theory of cascades and its applications.
2 Membrane Separations, Merits and demerits, Commercial, pilot plant 7
polarization of membrane processes and laboratory membrane permeators,
Dialysis, Reverse osmosis, Ultrafiltration, Membrane operations, Design
controlling factors.
3 Separation by Sorption Techniques, Types and choice of adsorbents, 7
chromatographic techniques, Retention theory mechanism, Design
controlling factors, ion exchange chromatography equipment and
commercial processes, recent advances in sorption technology.
4 Ionic Separations: Theory, mechanism and equipments for electrophoresis, 7
dielectrophoresis and electro dialysis, Controlling factors, Applications,
Design considerations.
5 Thermal Separation: Thermal diffusion, Rate law, Theories of thermal 7
diffusion for gas and liquid mixtures, Equipments design and applications,
Zone melting, Equilibrium diagrams, Controlling factors, Apparatus and
applications.
6 Other Techniques: Adductive crystallization, Molecular addition 7
compounds, Clathrate compounds and adducts, Equipments, Applications,
Economics and commercial processes. Foam Separation: Surface
adsorption, Nature of foams, Apparatus, Applications and Controlling
factors.
11. Suggested Books

No.
1 New Chemical Engineering Separation Techniques/ Schoen/ Wiley Interscience,
New York, 1972.
2 Separation Processes/ C.J. King/ Tata McGraw Hill, New Delhi,1982.
3 Bioseparations – Principles and Techniques/ B. Sivasankar/ Prentice Hall of India
Pvt. Ltd, New Delhi, 2005.
DRAFT AE-129
4 Separation process Principles/ Seader, Henley and Roper/ John Wiley & Sons 2010
5 Membrane Separation processes/ Kaushik Nath/ PHI , 2008.
PT365 NON-CONVENTIONAL ENERGY
1. Subject Code: PT365 Course Title: Non-Conventional Energy

5. Credits: 03
6. Semester: ODD-V
9. Objective: To make student aware about the fundamentals and applications of
non-conventional energy.
No. Hours
1 Renewable and non-renewable energy sources, trends in energy 6
consumption, Global and National scenarios, Prospects of renewable
energy sources, Energy Management.
2 Solar Energy: Solar radiation - beam and diffuse radiation, solar constant, 6
earth sun angles, measurement of solar radiation, flat plate collectors,
concentrating collectors, Solar air heaters-types, solar driers, Storage of
solar energy-thermal storage, Photo voltaics - solar cells & its applications.
3 Wind Energy: Basic system principles, Assessment of wind available, 4
Design principles, Manufactured designs, Sizing and storage of energy,
System efficiency, Overview of wind industry.
4 Energy from Biomass: Calorific value of Biomass samples, Pyrolysis, 6
Biomass conversion technologies, Biogas generation plants, classification,
advantages and disadvantages, constructional details, site selection,
digester design consideration, filling a digester for starting, maintaining
biogas production, Fuel properties of bio gas, utilization of biogas.
5 Geothermal Energy: Estimation and nature of geothermal energy, 4
geothermal sources and resources like hydrothermal, geo-pressured hot
dry rock, magma. Advantages, disadvantages, and application of
geothermal energy.
6 Ocean Energy: Ocean Thermal Electric Conversion systems like open 4
cycle, closed cycle, Hybrid cycle. Energy from tides, basic principle of
tidal power, single basin and double basin tidal power plants, advantages,
limitation and scope of tidal energy. Wave energy and power from wave,
wave energy conversion devices, advantages and disadvantages of wave
DRAFT AE-130
energy.
7 Magnetohydrdynamic Power Generation: Principle of MHD power 4
generation, MHD system, Design problems and developments, gas
conductivity, materials for MHD generators and future prospects.
8 Fuel Cells: Design principle and operation of fuel cell, Types of fuel cells, 4
conversion efficiency of fuel cell, applications of fuel cells.
9 Hydrogen Energy: Hydrogen Production methods, Hydrogen storage, 4
hydrogen transportation, utilization of hydrogen gas, hydrogen as
alternative fuel for vehicles.
11. Suggested Books
No.
1 Principles of Sustainable Energy Systems, Second Edition/ Frank Kreith, Susan
Krumdieck/ CRC Press, 2013.
2 Non-conventional energy sources/ G.D. Rai/ Khanna Publishers, 2004.
3 Solar Energy: Fundamentals and Applications/ H.P. Garg & Jai Prakash/ Tata McGraw
Hill, 2000
4 Solar Engineering of Thermal Processes/ Duffic and Beckman/ John Wiley, 2013
5 Non Conventional Energy Resources/ Saeed and Sharma/ S.K. Kataria& Sons ,2013
PT367 POLYMER WASTE MANAGEMENT

1. Subject Code: PT367 Course Title: Polymer Waste Management
5. Credits: 03
6. Semester: ODD-V
9. Objective: To impart knowledge about polymer waste and their management.
No. Hours
1 Polymer and Plastics Waste: Definition of plastics waste and the associated 8
problems, Identification, collection methods and separation. Integrated
waste management – source reduction, recycling, energy recovering
process through thermal and biological destruction, Land filling and
DRAFT AE-131
composting.
2 Plastics waste management: Source reduction, reuse, repair, recycling, and 8
incineration with examples. Plastics recycling: Classification, Code of
practice, Primary, secondary, territory and quaternary recycling with
examples, Waste plastics as fillers.
3 Recycling and degradation of plastics: Recycling and sustainability 9
correlation, Basic principles and recovery, recycling and resource
conservation.
4 Recycling of plastics by surface refurbishing, Application of a coating, 9
polishing, Plastics, Environmental and Thermal ageing, Chemical
degradation, Wear and erosion, Biodegradable plastics – an overview.
5 Environmental issues, policies and legislation in India. 8
11. Suggested Books
No.
1 Plastics Recycling – Products and Processes/ Ehrig (Ed.)/ Hanser Publication, 1993
2 Recycling and recovery of plastics/ Brandrup/ Hanser Publishers, New York, 1996
3 Handbook of Plastics Recycling/ By Francesco La Mantia/ Rapra Tech Ltd , 2002
4 Introduction to Plastics Recycling/ By VannessaGoodship/ Rapra Tech Ltd ,2007
PT369 NANOTECHNOLOGY IN POLYMERS

1. Subject Code: PT369 Course Title: Nanotechnology in Polymers
5. Credits: 03
6. Semester: ODD-V
9. Objective: To make student aware about the applications of nanopolymers in
various fields.
S. Contents Contac
No. t
Hours
1 Concepts of nanotechnology, Time and length scale in structures, 8
Nanosystems, Dimensionality and size dependent phenomena, Surface to
volume ratio-Fraction of surface atoms, Surface energy and surface stress,
DRAFT AE-132
surface defects, Properties at nanoscale (optical, mechanical, electronic, and
magnetic).
2 Nano-materials, Classification based on dimensionality, Quantum Dots, Wells 8
and Wires, Carbon-based nano-materials, Metal based nano-materials,
Nanocomposites, Nanopolymers, Nanoglasses, Nanoceramics, Biological
nanomaterials.
3 Synthesis of nanopolymers, Chemical Methods, Metal Nanocrystals by 9
Reduction, Solvothermal Synthesis, Photochemical Synthesis, Sonochemical
Routes, Chemical Vapor Deposition, Metal Oxide - Chemical Vapor
Deposition, Physical Methods such as ball Milling, electrodeposition, spray
pyrolysis, flame pyrolysis, DC/RF magnetron sputtering, Molecular beam
epitaxy.
4 Nanofabrication, Photolithography and its limitations, Electron beam 9
lithography, Nanoimprint, Soft lithography patterning, Characterization with
Field Emission Scanning Electron Microscopy, Environmental Scanning
Electron Microscopy, High Resolution Transmission Electron Microscope,
Scanning Tunneling Microscope, Surface enhanced Raman spectroscopy, X-
ray Photoelectron Spectroscopy, Auger electron spectroscopy, Rutherford
back scattering spectroscopy.
5 Applications of nanomaterials, Solar energy conversion and catalysis, 8
Molecular electronics and printed electronics, Nanoelectronics, Polymers
with aspecial architecture, Applications in displays and other devices,
Nanomaterials for data storage, Photonics, Plasmonics, Nanomedicine,
Nanobiotechnology and Nanotoxicology.
11.Suggested Books
No.
1 Organic and Inorganic Nanostructures/ Nabok/ Artech House, 2005.
2 Nanoscience: Nanotechnologies and Nanophysics/ Dupas, Houdy, Lahmani/ Springer-
Verlag Berlin Heidelberg ,2007
3 Nanostructured Materials and Nanotechnology/ H.S. Nalwa/ Academic Press , 2002
4 A Textbook of Nanoscience and Nanotechnology/ Pradeep/ Tata McGraw Hill
Education Pvt. Ltd. , 2012
PT371 APPLICATIONS OF POLYMER BLENDS AND COMPOSITE
1. Subject Code: PT371 Course Title: Applications of Polymer Blends and Composite
5. Credits: 03
DRAFT AE-133
6. Semester: ODD-V
9. Objective: To make student aware about the applications of polymers, blends
and composites.
No. Hours
1 Concepts of polymer blends, Advantages of blends over conventional 8
polymers, Significance of polymer blend technology, Different steps
involved in designing of a blend, Different methods of blending,
Characterization of polymer blends.
2 Compatibilization and Phase Morphology, Role of compatibilizers in 8
blend technology, techniques of compatibilization, Phase structure
development in polymer blends, Factors affecting morphology of polymer
blends, Properties of polymer blends.
3 Reinforcements, Properties and applications of Glass, Carbon, Kevlar, 9
polyethylene, boron, ceramic and natural fibers. Concepts of matrix
material, Thermoset matrix materials like - epoxy, polyester, vinyl esters,
phenolic resin, polyimides, Thermoplastic matrix materials like -
polyolefins, polyether ether ketones, polyphenylene sulfide, thermoplastic
polyimides.
4 Concept of composites, particulate and fibrous composites, Properties of 9
composites, Fabrication of continuous and short fiber composites and
particulate composites, mechanical and physical properties
5 Applications of blends and composites for civil, aerospace, automobiles 8
etc
11. Suggested Books

No.
1 Fibre Reinforced composites/ P. K. Malik/ Marcel Deckar, 1988.
2 Composites Manufacturing: Materials, Product, and Process Engineering/ S.K.
Mujumdar/ CRC press ,2002
3 Fibre-glass Reinforced Plastics/ N. P. Cheremisinoff (Ed)/ Noyce Pub, 1988.
4 Design Data for Reinforced Plastics/ N. L. Hancex, R. M. Mayer/ Chapman Hall,
1994.
5 Reinforced Plastics: Properties and Applications/ Raymond Seymour/ The Materials
Information Society, 1991.
DRAFT AE-134
IT351 ARTIFICIAL INTELLIGENCE AND MACHINE LEARNING
NAME OF DEPTT: Information Technology

1. Subject Code: IT351 Course Title: Artificial Intelligence and Machine Learning
3. Examination Duration (ETE)(Hrs.): Theory 3 Hrs Practical 0
5. Credits: 3
6. Semester: ODD
8. Pre-requisite: Discrete Mathematics
9. Objective: The student should be able to understand the different supervised, unsupervised and
reinforcement learning algorithms and choose the appropriate machine learning tool for different real
world examples.
S.No. Contents Contact
Hours
1. Introduction to Artificial Intelligence and Machine learning, State Space 6
representation of problems, Concept of Search, overview of different tasks:
classification, regression, clustering, control, Concept learning.
2. Heuristic Search Techniques: Generate and Test, Hill Climbing, Best-first 6
search, Branch and bound, A* algorithm, Game playing.
3. Knowledge Representation:Propositional logic, Predicate Logic, semantic 8
nets, frames
4. Supervised Learning: Decision trees, nearest neighbors, linear classifiers 8
and kernels, neural networks, linear regression; Support Vector Machines.
5. Unsupervised Learning: Clustering, Expectation Maximization, 8

Dimensionality Reduction, Feature Selection, PCA, factor analysis, manifold
learning.
6. Applications &Research Topics: Applications in the fields of web and data 6
mining, text recognition, speech recognition
TOTAL 42
11. Suggested Books

S.No. Name of Books / Authors/ Publishers Year of Publication/
Reprint
Text Book
1. Artificial Intelligence by Elaine Rich, K. Knight, McGrawHill 2009
DRAFT AE-135
1. Introduction to Machine Learning, Alpaydin, E., MIT Press, 2004
2. Machine Learning, Tom Mitchell, McGraw Hill, 1997. 1997
3. Elements of Machine Learning, Pat Langley Morgan Kaufmann 1995

Publishers, Inc. 1995. ISBN 1-55860-301-8
Reference Book
4. The elements of statistical learning, Friedman, Jerome, Trevor 2001

Hastie, and Robert Tibshirani. Vol. 1. Springer, Berlin: Springer
series in statistics, 2001.
5. Machine Learning: A probabilistic approach, by David Barber. 2006
6 Pattern recognition and machine learning by Christopher Bishop, 2006

Springer Verlag, 2006
IT353 DATA STRUCTURES AND ALGORITHMS

1. Subject Code: IT353 Course Title: Data Structures and Algorithms
3. Examination Duration (ETE) (Hrs.): Theory 3 Hrs Practical 0
5. Credits: 3
6. Semester: ODD
9. Objective: The objective of the course is to familiarize students with basic data structures and their
use in fundamental algorithms.
Hours
1. Introduction: Introduction to Algorithmic, Complexity- Time-Space Trade 8
off. Introduction to C programming through Arrays,
Stacks, Queues and Linked lists.
2. Trees: Basic Terminology, Traversals, Binary search trees, optimal and 7
average BST’s. 2-4 trees, Applications of Binary search Trees, Complete
Binary trees, Extended binary trees.
3. Introduction to algorithms: Concept of algorithmic efficiency, run time 9
analysis of algorithms, Asymptotic Notations. Growth of Functions,
Master's Theorem,
Searching and Searching: Linear Search, Binary search, Insertion Sort,
Quick sort, Merge sort, Heap sort, Radix Sort.
4. Graphs: Terminology and Representations, Graphs & Multi-graphs, 8
DRAFT AE-136
Directed Graphs, Representation of graphs, Breadth first search and
connected components. Depth first search in directed and undirected graphs
and strongly connected components.
5. Spanning trees: Prim's and Kruskal’s algorithm, union-find data structure. 10
Dijkstra’s algorithm for shortest paths, shortest path tree. Directed acyclic
graphs: topological sort and longest path.
Dynamic programming: Principles of dynamic programming.
Applications: Matrix multiplication, Travelling salesman Problem.
42
11. Suggested Books

S.No. Name of Books / Authors/ Publishers Year of
Publication/
Reprint
Text Books:
1. Horowitz and Sahni, “Fundamentals of Data structures”, Galgotia 1983
publications
2. Tannenbaum, “Data Structures”, PHI 2007( Fifth
Impression)
3. T .H . Cormen, C . E . Leiserson, R .L . Rivest “Introduction to 2011 ( reprint)
Algorithms”, 3rd Ed., PHI.
4. E. Horowitz, S. Sahni, and S. Rajsekaran, “Fundamentals of Computer
Algorithms,” Galgotia Publication
Reference Books
1. R.L. Kruse, B.P. Leary, C.L. Tondo, “Data structure and program 2009( Fourth
design in C”, PHI Impression)
2.
Aho ,Ullman “Principles of Algorithms ”
IT355 COMMUNICATION AND COMPUTING TECHNOLOGY

1. Subject Code: IT355 Course Title: Communication and Computing Technology
5. Credits: 3
6. Semester: ODD
8. Pre-requisite: Operating systems, Algorithm Design and Analysis and data structures
DRAFT AE-137
9. Objective: To introduce the concept of Communications in Computer networks
Hours
1. Introduction to Goals and Applications of Networks, Network structure and 6
architecture, The TCP/IP reference model, services, Network Topology.
2. Data Link Layer and Medium Access sub layer - Channel Allocations, 6
LAN protocols -ALOHA protocols - Overview of IEEE standards - FDDI. -
Elementary Data Link Protocols, Sliding Window protocols.
3. Network Layer: Routing, Congestion control, Internetworking -TCP / IP, IP 8
packet, IP address, IPv6 and Mobile IP.
4. Transport Layer: Design issues, TCP and UDP, connection management, 8
Congestion control, Leaky bucket, Token bucket algorithm. QoS.
5. Application Layer: File Transfer, Access and Management, Electronic mail, 6
Virtual Terminals, Internet and Public Networks, Firewalls
6. Information and Web security: IP Security, Architecture, Authentication 8
header, Encapsulating security payloads, combining security associations,
Secure Socket Layer(SSL) and transport layer security, TSP, Secure
Electronic Transaction (SET), Electronic money.
TOTAL 42
11. Suggested Books

Reprint
Text Book
1. S. Tananbaum, “Computer Networks”, 3rd Ed, PHI 1999

2.  U. Black, “Computer Networks-Protocols, Standards and 1996
Interfaces”, PHI
3. W. Stallings, “Computer Communication Networks”, PHI 1999
3. Data Communications and Networking, Behrouz A. Forouzan 5/e 2013
Reference Book
4. William Stallings, “Cryptography and Network Security: Principals 2001

and Practice”, Prentice Hall, New Jersy.
5. Behrouz A. Forouzan, “Cryptography and Network Security”, 2006
TMH.
IT357 INTERNET AND WEB PROGRAMMING

DRAFT AE-138
1. Subject Code: IT357 Course Title: Internet and Web Programming
5. Credits: 3
6. Semester: ODD
9. Objective: To introduce the concept of internet and web programming
Hours
1. Internet and WWW: Internet basic, Introduction to internet and its 6
applications, E- mail, telnet, FTP, e-commerce, video conferencing, e-
business. Internet service providers, domain name server, internet address
World Wide Web (WWW): World Wide Web and its evolution, uniform
resource locator (URL), browsers - internet explorer, netscape navigator,
opera, firefox, chrome, mozilla. Search engine, web saver - apache, IIS,
proxy server, HTTP protocol.
2. WEBSITES BASIC ANDWEB 2.0: Web 2.0: Basics-RIA Rich 6
Internet Applications - Collaborations tools - Understanding websites and
web servers: Understanding Internet – Difference between websites and web
server- Internet technologies Overview – Understanding the difference
between internet and intranet; HTML and CSS: HTML 5.0 , XHTML, CSS
3.
3. E-MAIL SECURITY & FIREWALLS : PGP - S/MIME - Internet 8
Firewalls for Trusted System: Roles of Firewalls - Firewall related
terminology- Types of Firewalls - Firewall designs - SET for E-Commerce
Transactions, intellectual property: copyright, patents, trademarks, cyber
laws
4. SERVELETS AND JSP: JSP Technology Introduction-JSP and Servelets- 8
Running JSP Applications Basic JSP- JavaBeans Classes and JSP-Tag
Libraries and Files- Support for the Model- View- Controller Paradigm- Case
Study- Related Technologies.
5. XML: Introduction to XML, uses of XML, simple XML, XML key 6
components, DTD and Schemas, Well formed, using XML with
application.XML, XSL and XSLT. Introduction to XSL, XML transformed
simple example, XSL elements, transforming with XSLT
6. PHP: Starting to script on server side, Arrays, function and forms, advance 8
PHP, Basic command with PHP examples, Connection to server, creating database,
selecting a database, listing database, listing table names creating a table, inserting
data, altering tables, queries, deleting database, deleting data and tables, PHP my
admin and database bugs.
TOTAL 42
11. Suggested Books

DRAFT AE-139
Reprint
Text Books
1. Internet and Web Technologies by Raj Kamal, Tata McGraw Hill 2002
edition. (ISBN: 9780070472969)
2. An Introduction to Search Engines and Web Navigation, Mark 2010
Levene, Pearson Education. (ISBN: 978047052684)
3. Modeling the Internet and the Web,PierreBaldi,PaoloFrasconi, Padhraic 2003
Smyth, John Wiley and Sons Ltd. (ISBN: 978-0-470-84906-4)
Reference Books
4. HTML: A Beginner’s Guide by Wendy Willard, Tata McGraw- 2009
Hill (ISBN: 9780070677234)
5. PHP and MySQL for Dynamic Web Sites, Ullman, Larry, 2012
Peachpit Press.1 (ISBN: 978-0-321-78407-0)
IT359 JAVA PROGRAMMING

1. Subject Code: IT359 Course Title: Java Programming
5. Credits: 3
6. Semester: ODD
9. Objective: To introduce the concept of java programming
Hours
1. Introduction to Java: Programming language Types and Paradigms, 6
Computer Programming Hierarchy, How Computer Architecture Affects a
Language? , Why Java?, Flavors of Java, Java Designing Goal, Role of Java
Programmer in Industry, Features of Java Language, JVM –The heart of Java
, Java’s Magic Byte code.
2. The Java Environment: Installing Java, Java Program Development, Java Source 6
File Structure, Compilation, Executions. Lexical Tokens, Identifiers, Keywords,
Literals, Comments, Primitive Datatypes, Operators Assignments.
3. Object Oriented Programming: Class Fundamentals , Object & Object reference, 8
Object Life time & Garbage Collection, Creating and Operating Objects ,
Constructor & initialization code block, Access Control, Modifiers, methods Nested
, Inner Class &Anonymous Classes, Abstract Class & Interfaces Defining Methods,
Argument Passing Mechanism, Method Overloading, Recursion, Dealing with
Static Members, Finalize() Method, Native Method.
4. Extending Classes and Inheritance: Use and Benefits of Inheritance in OOP, 8
Types of Inheritance in Java, Inheriting Data members and Methods, Role of
Constructors in inheritance, Overriding Super Class Methods, Use of “super”,
DRAFT AE-140
Polymorphism in inheritance, Type Compatibility and Conversion Implementing
interfaces.
5. Package: Organizing Classes and Interfaces in Packages, Package as Access 6
Protection, Defining Package, CLASSPATH Setting for Packages, Making JAR
Files for Library Packages Import and Static Import Naming Convention For
Packages.
6. GUI Programming: Designing Graphical User Interfaces in Java, Components and 8
Containers, Basics of Components, Using Containers, Layout Managers, AWT
Components, Adding a Menu to Window, Extending GUI Features Using Swing
Components, Java Utilities (java.util Package) The Collection Framework:
Collections of Objects, Collection Types, Sets , Sequence, Map, Understanding
Hashing, Use of Array List & Vector.
TOTAL 42
11. Suggested Books

Reprint
Text Books
1. The Complete Reference Java,, Herbert Schildt, 7th Edition
ISBN: 978-0-07163177-8, Publisher: McGraw Hill
2. Thinking in Java, Bruce Eckel, ISBN: 0-13-187248-6, Publisher: 4th Edition

Prentice Hall
3. The Java Programming Languages,, Ken Arnold, ISBN-13: 978- 4th Edition,
032134980, Publisher: Sun
4. Java in Nutshell,, Benjamin,ISBN: 9781449371296, Publisher: 6th Edition

O'Reilly Media, Inc.
DRAFT AE-141

Mam PDF

Uploaded by

Copyright:

Available Formats

Mam PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mam PDF

Uploaded by

Copyright:

Available Formats

DEPARTMENT OF MECHANICAL ENGINEERING

DELHI TECHNOLOGICAL UNIVERSITY

II Year: Odd Semester

S. Code Title Area Cr L T P TH PH CWS PRS MTE ETE PRE

S. Code Title Area Cr L T P TH PH CWS PRS MTE ETE PRE

III Year: Odd Semester

S.No. Code Title Area Cr L T P TH PH CWS PRS MTE ETE PRE

S.No. Code Title Area Cr L T P TH PH CWS PRS MTE ETE PRE

IV Year: Odd Semester

S. Code Title Area Cr L T P T P CWS PR MT ETE PR

S. Code Title Area Cr L T P T P CWS PR MT ETE PR

List of Departmental Elective Courses

List of University Elective Courses

11. Suggested Books:

1. Subject Code: AE201 Course Title: Engineering Mechanics

11. Suggested Books:

1. Subject Code: AE203 Course Title: Thermodynamics

11. Suggested Books:

1. Subject Code: AE205 Course Title: Manufacturing Machines

11. Suggested Books:

1. Subject Code: AE207 Course Title: Engineering Analysis and Design

11. Suggested Books:

S. No. Name of Authors /Books / Publishers

1. Subject Code: MG201 Course Title: Fundamentals of Management

S.No. Detail Contents Contact Hrs.

S. No. Name of Books / Authors/ Publishers

1. Subject Code: EE272 Course Title: Automotive Electrical & Electronics

11. Suggested Books:

1. Subject Code: AE202 Course Title: Heat and Mass Transfer

1. Subject Code: AE204 Course Title: Theory of Machines

11. Suggested Books:

1. Subject Code: AE206 Course Title: Mechanics of Solids

11. Suggested Books:

1. Subject Code: AE208 Course Title: Material Engineering & Metallurgy

6. Powder metallurgy: principles, techniques, application and advantages, surface treatment. 6

11. Suggested Books:

11. Suggested Books:

11. Suggested Books:

1. Subject Code:HU301 Course Title: Technical Communication

Sl. No. Contents Contact

1. English for Professional Purposes:

Sl.No. Name of Books, Authors, Publishers

1. Subject Code: AE302 Course Title: Design of Machine Elements

11. Suggested Books:

1. Subject Code: AE304 Course Title:Internal Combustion Engines

1. Subject Code: AE306 Course Title:Design of Automobile components

1. Subject Code: HU302Course Title: Professional Ethics and Human Values

Professional Ethics and Technology :Science, Technology and Professional

Sl.No. Name of Books, Authors, Publishers

1. Professional Ethics, Subramanian, R, Oxford University Press, 2011 ISBN13: 978-0-19-808634-5

1. Subject Code: AE401 Course Title: B.Tech Project-I

Subject Code: AE403 Course Title: Training Seminar

10. Details of Course:

11. Suggested Books:

1. Subject Code: AE407 Course Title: Production and operations management

11. Suggested Books:

1. Subject Code: AE-402 Course Title: B.Tech project-II

Departmental Elective Courses (DEC)

11. Suggested Books: