Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 438 views

    Ortea Orion Plus 3 Phase

    Uploaded by

    Reymart Manablug
    ORION Plus stabilizers can regulate output voltage independently on each phase from 210V-255V (L-N) and 360V-440V (L-L). They are housed in modular cabinets suitable for industrial environments and able to tolerate mechanical stress. ORION Plus stabilizers measure input/output voltage, current, power factor, active power, apparent power, and reactive power. They provide LED displays and alarms for operating status and faults. Larger ORION Plus stabilizers over 300kVA have electronic protection that maintains supply during overloads by setting voltage to the lower of mains or preset output voltage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ortea Orion Plus 3 Phase

    Uploaded by

    Reymart Manablug
    438 views2 pages
    ORION Plus stabilizers can regulate output voltage independently on each phase from 210V-255V (L-N) and 360V-440V (L-L). They are housed in modular cabinets suitable for industrial environments and able to tolerate mechanical stress. ORION Plus stabilizers measure input/output voltage, current, power factor, active power, apparent power, and reactive power. They provide LED displays and alarms for operating status and faults. Larger ORION Plus stabilizers over 300kVA have electronic protection that maintains supply during overloads by setting voltage to the lower of mains or preset output voltage.

    Original Description:

    Free

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ORION Plus stabilizers can regulate output voltage independently on each phase from 210V-255V (L-N) and 360V-440V (L-L). They are housed in modular cabinets suitable for industrial environments and able to tolerate mechanical stress. ORION Plus stabilizers measure input/output voltage, current, power factor, active power, apparent power, and reactive power. They provide LED displays and alarms for operating status and faults. Larger ORION Plus stabilizers over 300kVA have electronic protection that maintains supply during overloads by setting voltage to the lower of mains or preset output voltage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    438 views2 pages

    Ortea Orion Plus 3 Phase

    Uploaded by

    Reymart Manablug
    ORION Plus stabilizers can regulate output voltage independently on each phase from 210V-255V (L-N) and 360V-440V (L-L). They are housed in modular cabinets suitable for industrial environments and able to tolerate mechanical stress. ORION Plus stabilizers measure input/output voltage, current, power factor, active power, apparent power, and reactive power. They provide LED displays and alarms for operating status and faults. Larger ORION Plus stabilizers over 300kVA have electronic protection that maintains supply during overloads by setting voltage to the lower of mains or preset output voltage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Three-phase - 'ORION Plus' (80kVA to 1250kVA)

    (independent phase voltage control)

    from 210V to 255V (L – N)


    PC SELECTABLE OUTPUT VOLTAGE
    from 360V to 440V (L – L)
    FREQUENCY 50/60Hz ±5%
    ADMITTED LOAD VARIATION up to100%
    ADMITTED LOAD UNBALANCE up to 100%
    COOLING Natural air (Aided over 45°C)
    AMBIENT TEMPERATURE -25/+45 °C
    STORAGE TEMPERATURE -25/+60°C
    RELATIVE HUMIDITY 95%
    ADMITTED OVERLOAD 200 % 2min
    COLOUR RAL 7035
    PROTECTION IP 21
    INSTALLATION Indoor

    Further details in the technical data tables

    Orion Plus
    ORION Plus stabilisers can be chosen to match different ranges of input
    voltage fluctuation (±15/±20%; ±25/±30%; +15/-35%; +15/-45%)
    For ±15%/ ±20% and ±25%/ ±30% range, the change of stabilisation is
    obtained through different internal connections.
    They are housed in modular cabinets suitable for any industrial
    environment and able to tolerate mechanical stress that may occur
    during transport and installation.
    The ORION PLUS voltage stabilisers regulate the voltage independently on each phase. Typically, the
    stabiliser is used in case of unbalanced mains distribution and unbalanced three- or single-phase load
    distribution. In this situation the presence of the neutral wire is required. The stabiliser can also
    operate without neutral wire by adding a device able to generate it (/zn or  /Yn isolating transformer
    or neutral inductance).
    The stabilisers are air cooled (natural convection with cabinet internal temperature lower than 45°C).
    The measuring instrumentation for the ORION PLUS stabilisers is incorporated in a control panel on
    the cabinet door and consists of two multi-task digital network analysers. Such instruments are
    able to provide with information regarding the
    status of the lines upstream and downstream the
    voltage stabiliser such as phase and linked
    voltages, current, power factor, active power,
    apparent power, reactive power, etc.
    The operating status of the stabiliser can be
    easily monitored by means of a LED interface
    placed on the front panel, which displays all the
    information regarding the operating of the three
    phases and the possible alarms. LED lights signal
    ‘power on’, reaching of voltage regulation limits
    and direction of voltage regulation
    (increase/decrease). Alarms for minimum and
    maximum voltages, maximum current, over-temperature and ventilation failure are also indicated. The
    alarm indicators are accompanied by an acoustic alarm.
    Up to 260kVA ±15%, an automatic circuit breaker is provided on the regulation circuit to protect
    against overload and short circuit on the voltage regulator.
    From 300kVA ±15%, an electronic voltage regulator protection system activates in case of
    overload on the voltage regulator. In such condition the load supply is not interrupted, but the
    stabiliser output voltage is automatically set to the lower between the mains voltage and the
    pre-set output voltage. The service continuity is guaranteed, although the voltage is not
    stabilised. When the overload condition ceases to exist, the stabiliser switches automatically
    back to regular functioning.
    The logic control, performed on the true rms voltage, is based on the 2-way DSP microprocessor.
    By means of fine settings and specific configurations, this control system can be set by using a
    personal computer: this characteristic allows for solving any problem of voltage stability in any
    industrial plant.
    All ORION PLUS stabilisers are provided with SPD surge arrestors type 2.

    26 Orion Plus ready to be shipped

    You might also like