Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 76 views

    Cable

    Uploaded by

    JAY PARIKH
    The document outlines various types of tests performed on cables according to IS – 7098 (Part 2) - 1985, including type tests, acceptance tests, and routine tests. Type tests extensively evaluate the conductor, insulation, outer sheath, and overall cable design. Acceptance tests examine critical characteristics. Routine tests check resistance, insulation, and voltage withstand. Optional tests also exist, such as cold impact tests on the outer sheath.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Cable

    Uploaded by

    JAY PARIKH
    76 views2 pages
    The document outlines various types of tests performed on cables according to IS – 7098 (Part 2) - 1985, including type tests, acceptance tests, and routine tests. Type tests extensively evaluate the conductor, insulation, outer sheath, and overall cable design. Acceptance tests examine critical characteristics. Routine tests check resistance, insulation, and voltage withstand. Optional tests also exist, such as cold impact tests on the outer sheath.

    Original Description:

    cable

    Original Title

    cable

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines various types of tests performed on cables according to IS – 7098 (Part 2) - 1985, including type tests, acceptance tests, and routine tests. Type tests extensively evaluate the conductor, insulation, outer sheath, and overall cable design. Acceptance tests examine critical characteristics. Routine tests check resistance, insulation, and voltage withstand. Optional tests also exist, such as cold impact tests on the outer sheath.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    76 views2 pages

    Cable

    Uploaded by

    JAY PARIKH
    The document outlines various types of tests performed on cables according to IS – 7098 (Part 2) - 1985, including type tests, acceptance tests, and routine tests. Type tests extensively evaluate the conductor, insulation, outer sheath, and overall cable design. Acceptance tests examine critical characteristics. Routine tests check resistance, insulation, and voltage withstand. Optional tests also exist, such as cold impact tests on the outer sheath.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    CABLE TESTS AS PER IS – 7098 (PART 2) - 1985

    1) TYPE TEST

    a) Test on Conductor
    i) Annealing test (for copper)
    ii) Tensile test (for aluminium)
    iii) Wrapping test (for aluminium)
    iv) Resistance test.

    b) Tests for armouring wires / strips.


    c) Test for thickness of insulation and sheath

    d) Physical tests for insulation


    i) Tensile strength and elongation at break.
    ii) Ageing in air oven.
    iii) Hot test
    iv) Shrinkage test
    v) Water absorption (gravimetric)

    e) Physical tests for outer sheath.


    i) Tensile strength and elongation at break.
    ii) Ageing in air oven.
    iii) Hot test
    iv) Shrinkage test

    f) Bleeding and blooming test (for outer sheath)


    g) Partial Discharge test.

    h) Bending test
    i) Dielectric Power factor test
    i) As a function of voltage
    ii) As a function of temperature

    K) Insulation resistance (volume resistivity ) test


    l) Heating cycle test
    m) Impulse withstand test
    n) High voltage test
    o) Flammability test

    2) ACCEPTANCE TEST

    a) Annealing test (for copper)


    b) Tensile test (for aluminium)
    c) Wrapping test (for aluminium)
    d) Conductor resistance test
    e) Test for thickness of insulation and sheath
    f) Hot test for insulation
    g) Tensile strength and elongation at break test for insulation and sheath
    h) Partial discharge test (for screened cable only)
    i) High voltage test
    j) Insulation resistance (volume resistivity) test

    3) ROUTINE TEST

    a) Conductor resistance test


    b) Partial discharge test (for screened cable only)
    c) High voltage test

    4) OPTIONAL TEST

    a) cold impact test for outer sheath

    A)

    You might also like