Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 277 views

    Method Statement For FA System

    Uploaded by

    santhilal
    This document provides a method statement for installing a fire alarm system at a campus site. It outlines the objectives, scope, materials, tools, and procedures required. The procedures describe general storage and handling of equipment, installation of light fixtures, quality control checks, and responsibilities of roles like the site engineer, surveyor, and HSE manager. The installation work will be carried out according to this document and specifications to ensure compliance.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Method Statement For FA System

    Uploaded by

    santhilal
    277 views6 pages
    This document provides a method statement for installing a fire alarm system at a campus site. It outlines the objectives, scope, materials, tools, and procedures required. The procedures describe general storage and handling of equipment, installation of light fixtures, quality control checks, and responsibilities of roles like the site engineer, surveyor, and HSE manager. The installation work will be carried out according to this document and specifications to ensure compliance.

    Original Description:

    method statements for Fire Alarm Sytem

    Original Title

    Method Statement for FA System

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a method statement for installing a fire alarm system at a campus site. It outlines the objectives, scope, materials, tools, and procedures required. The procedures describe general storage and handling of equipment, installation of light fixtures, quality control checks, and responsibilities of roles like the site engineer, surveyor, and HSE manager. The installation work will be carried out according to this document and specifications to ensure compliance.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    277 views6 pages

    Method Statement For FA System

    Uploaded by

    santhilal
    This document provides a method statement for installing a fire alarm system at a campus site. It outlines the objectives, scope, materials, tools, and procedures required. The procedures describe general storage and handling of equipment, installation of light fixtures, quality control checks, and responsibilities of roles like the site engineer, surveyor, and HSE manager. The installation work will be carried out according to this document and specifications to ensure compliance.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 6
    At a glance
    Powered by AI
    The key takeaways from the document are the procedures and safety measures involved in installing a fire alarm system as per specifications.

    The steps involved are receiving and storing materials, running continuity tests during cable laying, installing detectors and call points as per layout, testing and commissioning the system, and ensuring UPS power supply for panels.

    Safety precautions that need to be taken are obtaining necessary permits, ensuring all safety norms are followed as per the project safety plan, conducting safety inductions and daily PPE checks.

    METHOD STATEMENT BIETC CAMPUS (BLOCK 1 &

    SECURITY PLAZA)
    BIETC CAMPUS, BANGALORE

    ELV/BIETC/WMS/001 REV-R0

    REVISION RECORDS

    VENDOR
    REVISION NO REF NO COMMENTS
    RESPONSE
    Method Statement for Fire Alarm System
    Objective

    The objective of generating this Method Statement is to define the procedure


    step by step to implement the correct practices for Fire Alarm System installation
    procedure through guidelines so as to ensure that the job execution complies
    with the requirements of contract specifications and serves the intended function
    to satisfactory level.

    Scope

    This Method Statement is to give instructions regarding the FA System installation


    at the Project Site.

    REFERENCE:

     Project Quality Plan


     Contract Specification No.
     Employers Requirement
     Approved Technical Data Sheets
     Approved Shop Drawings
     Manufacturer's Catalogues & Recommendations

    MATERIALS, TOOLS AND TACKLES:

     Drilling machine
     Electrical tool kit
     Continuity Tester
     Crimping tool with crimping bits for all required sizes
     Line Tester Chains
     Multimeter
     Illumination Lights
     Scaffolding

    PROCEDURE:

    1. Precautions before start of work

    Prior to start Installation Work, following documents shall be made available:


     Ensure all safety norms are in place as per project safety plan.
     Ensure all required work permits are obtained.
     Approved drawing available
     Approved logistic plan
     Ensure all predecessor activities are approved.
    2. General storage and Handling procedures
     All Fire alarm control panels and input output devices, and accessories
    shall be carefully off-loaded at site using necessary manpower / chain
    pulley block etc. in such a way that no damage is caused to it.
     Visual check shall be done to see whether the Equipment’s and accessories
    supplied is in proper protective Packing and is in undamaged condition.
     Equipment’s shall be stored/stacked in a place free of water and
    adequately covered to avoid any kind of damages and protection when
    storing on a flat surface free from sharp objects.
     All equipment shall be transported to the work place.
    3. Procedure for Light Fixture Installation:
     The installation works will be carried out strictly in accordance with this
    document / specifications / approved material submittal.
     Retain the shipping crates and protection covers until the equipment’s are
    at final location.
     For unloading, lifting and rigging of units follow manufacturer's
    recommendation.
     The scope of work includes providing, installing and commissioning of
    smoke / heat / duct detectors, manual call points, hooters, main fire
    alarm panel, repeater panel, response indicator, modules etc. All these
    equipment’s shall be interconnected by 2Core x 1.5 sq. mm Multistrand
    copper FRLS cable.
     Armored Cable shall be adequately supported at every 300 mm distance as
    per TAC rules.
     Continuity test shall be carried out during cable laying work for various
    equipment, in stages as work proceeds.
     Cables to be tagged with proper ferrules for easy identification at panel
    location.
     Manual call points shall be installed at a height of 1200 mm form FFL in all
    floors as per approved layout drawings.
     Prior to installation of any equipment approval from consultant/client shall
    be taken.
     Continuity and loop-wise test shall be carried out for all detectors, manual
    call points, and hooters after installation is completed.
     Testing & commissioning of the system shall be carried out as per system
    specifications, manufacturer's recommendations and standard
    procedures UPS Power supply for Main FA panel and repeater panel to be
    ensured.
     Graphic Software (if applicable). Programming and mapping shall be done
    as per site.
     Integration of FA system with other services needs to be hooked up if
    required.
     Cable tray shall be used for laying conduits wherever required.
     After commissioning, provide the operation instruction chart with Do’s &
    Don’ts next to the panel.

    4. Quality Control
     Quality Formats for Installation, Testing and Commissioning activities to be
    used.
     Ensure that all the instructions as per this Method Statement are followed
    at site.

    Responsibilities

    Site Engineer: He shall be responsible for executing in safe work method as per
    drawings and guide the supervisors and workmen.

    Surveyor: Surveyor shall ensure the markings and levels are established as per
    approved drawings.

    Site Supervisor: He shall be responsible managing all plant and machineries and
    labor and safety of the workers.
    QA/QC Site In charge: He shall be responsible for ensuring the quality
    of work as per the specifications and standard.

    HSE Manager/Engineer: He shall be responsible for assisting to


    engineer/supervisor to ensure the safety of workers during the progress of
    work. Safety inductions of each staff and workers shall be done and daily PPE
    check to be done and toolbox talk shall be carried out before the start of work.
    General safety awareness as well as safety precautions and guidelines for
    activity to be carried out in that particular day shall be discussed.

    Stores officer: He shall be responsible for receiving and storing of all


    incoming materials. Also, responsible for maintaining the record of incoming
    and outgoing and up to date stock details of materials.

    *****

    You might also like