FQPF13N06L 1306265 PDF
FQPF13N06L 1306265 PDF
FQPF13N06L 1306265 PDF
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FQPF13N06L — N-Channel QFET® MOSFET
November 2013
FQPF13N06L
N-Channel QFET® MOSFET
60 V, 10 A, 110 mΩ
Description Features
This N-Channel enhancement mode power MOSFET is • 10 A, 60 V, RDS(on) = 110 mΩ (Max.) @ VGS = 10 V,
produced using Fairchild Semiconductor’s proprietary ID = 5 A
planar stripe and DMOS technology. This advanced
• Low Gate Charge (Typ. 4.8 nC)
MOSFET technology has been especially tailored to reduce
on-state resistance, and to provide superior switching • Low Crss (Typ. 17 pF)
performance and high avalanche energy strength. These
• 100% Avalanche Tested
devices are suitable for switched mode power supplies,
audio amplifier, DC motor control, and variable switching • 175°C Maximum Junction Temperature Rating
power applications.
G G
D
S
TO-220F
S
Thermal Characteristics
Symbol Parameter FQPF13N06L Unit
RθJC Thermal Resistance, Junction-to-Case, Max. 6.20 °C/W
RθJA Thermal Resistance, Junction-to-Ambient, Max. 62.5 °C/W
Off Characteristics
BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 μA 60 -- -- V
ΔBVDSS Breakdown Voltage Temperature
ID = 250 μA, Referenced to 25°C -- 0.05 -- V/°C
/ ΔTJ Coefficient
IDSS VDS = 60 V, VGS = 0 V -- -- 1 μA
Zero Gate Voltage Drain Current
VDS = 48 V, TC = 150°C -- -- 10 μA
IGSSF Gate-Body Leakage Current, Forward VGS = 20 V, VDS = 0 V -- -- 100 nA
IGSSR Gate-Body Leakage Current, Reverse VGS = -20 V, VDS = 0 V -- -- -100 nA
On Characteristics
VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 μA 1.0 -- 2.5 V
RDS(on) Static Drain-Source VGS = 10 V, ID = 5 A -- 0.088 0.11
Ω
On-Resistance VGS = 5 V, ID = 5 A -- 0.110 0.14
gFS Forward Transconductance VDS = 25 V, ID = 5 A -- 5.5 -- S
Dynamic Characteristics
Ciss Input Capacitance VDS = 25 V, VGS = 0 V, -- 270 350 pF
Coss Output Capacitance f = 1.0 MHz -- 95 125 pF
Crss Reverse Transfer Capacitance -- 17 23 pF
Switching Characteristics )
td(on) Turn-On Delay Time -- 8 25 ns
VDD = 30 V, ID = 6.8 A,
tr Turn-On Rise Time -- 90 190 ns
RG = 25 Ω
td(off) Turn-Off Delay Time -- 20 50 ns
(Note 4)
tf Turn-Off Fall Time -- 40 90 ns
Qg Total Gate Charge VDS = 48 V, ID = 13.6 A, -- 4.8 6.4 nC
Qgs Gate-Source Charge VGS = 5 V -- 1.6 -- nC
Qgd Gate-Drain Charge (Note 4) -- 2.7 -- nC
Notes:
1. Repetitive Rating : Pulse width limited by maximum junction temperature.
2. L = 1.05 mH, IAS = 10 A, VDD = 25 V, RG = 25 Ω, starting TJ = 25°C.
3. ISD ≤ 13.6 A, di/dt ≤ 300 A/μs, VDD ≤ BVDSS, starting TJ = 25°C.
4. Essentially independent of operating temperature.
VGS
Top : 10.0 V
8.0 V
6.0 V
5.0 V
4.5 V
1
4.0 V 10
ID, Drain Current [A]
3.5 V
0
10
175℃
250
Drain-Source On-Resistance
200
IDR, Reverse Drain Current [A]
1
10
VGS = 5V
R DS(O N) [m Ω ],
150
VGS = 10V
100
0
10
50
※ Notes :
※ Note : TJ = 25℃ 175℃ 25℃ 1. VGS = 0V
2. 250μs Pulse Test
0
0 10 20 30 40 10
-1
800 12
Ciss = Cgs + Cgd (Cds = shorted)
Coss = Cds + Cgd
Crss = Cgd
10
V G S, Gate-Source Voltage [V]
VDS = 30V
600
VDS = 48V
8
Capacitance [pF]
Coss
※ Notes :
Ciss 1. VGS = 0 V
2. f = 1 MHz 6
400
200 Crss
2
※ Note : ID = 13.6A
0
0 0 2 4 6 8 10
-1 0 1
10 10 10
QG, Total Gate Charge [nC]
VDS, Drain-Source Voltage [V]
1.2
2.5
Drain-Source Breakdown Voltage
Drain-Source On-Resistance
2.0
1.1
BVDSS, (Normalized)
RDS(ON), (Normalized)
1.5
1.0
1.0
0.9 ※ Notes :
1. VGS = 0 V
2. ID = 250 μA 0.5 ※ Notes :
1. VGS = 10 V
2. ID = 6.8 A
0.8 0.0
-100 -50 0 50 100 150 200 -100 -50 0 50 100 150 200
o o
TJ, Junction Temperature [ C] TJ, Junction Temperature [ C]
15
1 ms
1 10 ms 9
10
DC
0
10
※ Notes :
o
3
1. TC = 25 C
o
2. TJ = 175 C
3. Single Pulse
-1
10 0
-1 0 1 2
10 10 10 10 25 50 75 100 125 150 175
Figure 9. Maximum Safe Operating Area Figure 10. Maximum Drain Current
vs. Case Temperature
[oC/W]
D = 0 .5
Response
0
10
Response
0 .2
※ N otes :
0 .1 1 . Z θ J C( t ) = 3 . 3 5 ℃ /W M a x .
2 . D u t y F a c t o r , D = t 1 /t 2
Therm al
0 .0 5 3 . T J M - T C = P D M * Z θ J C( t )
(t),Thermal
-1 0 .0 2
10
0 .0 1 PDM
s in g le p u ls e
t1
(t),
θ JC
t2
ZZθJC
-2
10
-5 -4 -3 -2 -1 0 1
10 10 10 10 10 10 10
t1 , S q u a r e W a v e P u ls e D u r a tio n [s e c ]
DUT
IG = const.
3mA
Charge
RL VDS
VDS 90%
VGS VDD
RG
10%
VGS
V
10V
GS
DUT
td(on) tr td(off)
tf
t on t off
L 1 BVDSS
VDS EAS = ---- L IAS2 --------------------
2 BVDSS - VDD
BVDSS
ID
IAS
RG
VDD ID (t)
V
10V
GS
GS DUT VDD VDS (t)
tp
tp Time
VDS
I SD
L
Driver
RG
Same Type
as DUT VDD
IRM
VSD VDD
Body Diode
Forward Voltage Drop
Figure 15. Peak Diode Recovery dv/dt Test Circuit & Waveforms
Figure 16. TO220, Molded, 3-Lead, Full Pack, EIAJ SC91, Straight Lead
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specif-
ically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/package/packageDetails.html?id=PN_TF220-003
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website,
www.Fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild
Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of
up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and
warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is
committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
Authorized Distributor
ON Semiconductor:
FQPF13N06L