Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
50 views

Edit Layout: 1. Create ULT Structure: Layout

This document provides instructions for creating a bridge model in MIDAS CIM. It involves 3 steps: 1. Create the bridge layout with 4 spans of 100 feet each and define the support locations. 2. Assign pre-defined unit structures from the library to each span, including PSC bridges, a PSC box, and abutments. 3. Modify the layout by applying a 400 foot radius curvature to spans 2 and 3.

Uploaded by

richard kwofie
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
50 views

Edit Layout: 1. Create ULT Structure: Layout

This document provides instructions for creating a bridge model in MIDAS CIM. It involves 3 steps: 1. Create the bridge layout with 4 spans of 100 feet each and define the support locations. 2. Assign pre-defined unit structures from the library to each span, including PSC bridges, a PSC box, and abutments. 3. Modify the layout by applying a 400 foot radius curvature to spans 2 and 3.

Uploaded by

richard kwofie
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

MIDAS CIM PSC Box Bridge

Edit Layout
1. Create ULT Structure : Layout

1. In Main Mode, Base Tab > Layout Editor


2. Enter Layout information, ID: 1 Name: Layout
3. Alignment Tap > Add 4 Span of 100 ft (100 ft, 100 ft, 100 ft, 100 ft)
4. Profile Tap > Set End Station to be 400 ft as there is no change in elevation profile
5. Cross Section Tap > : Support Type , Station (100ft , 200ft, 300ft) to set up support
location
6. use check button to create layout

37 https://www.midasuser.com
MIDAS CIM PSC Box Bridge

Edit Layout
2. Assign ULT Structure

1. In Main Mode, Structure > Library > Unit Structure > Assign
2. From Unit Structure list, Select library : PSC Bridge and assign unit structure by
selecting span 2 and add, repeat the step for span 3
3. From Unit Structure list, Select library : PSC Box and assign unit structure by
selecting span 1 and add, repeat the step for span 4
4. From Unit Structure list, Select library : Abutment and assign unit structure by
selecting layout with layoutwise on
5. use check button to create the bridge as assigned.

38 https://www.midasuser.com
MIDAS CIM PSC Box Bridge

Edit Layout
3. Modify Layout Editor

1. In Main Mode, Base Tab > Layout Editor


2. Load “Layout” from layout list
3. Alignment Tap > Apply curvature by changing type from Straight to Arc on Span
2,3 and entering Radius of 400 ft.
4. use check button to apply the curvature

3 3

39 https://www.midasuser.com

You might also like