Office (India) Office (Overseas) Works

Gurgaon Gurgaon
Italy
Office : Plot No 64, 2nd Floor, Udyog Vihar Phase - IV, Village & PO Pathredi,
Office : Inox Market Service S.r.l.
Gurgaon - 122016, Haryana, (INDIA) Bilaspur - Tauru Road
Via Canada, 30 - 35100, Padova, (ITALY)
Phone : +91 124 4127700, Gurgaon - 122413,
Phone : +39 049 879 82 11/12
Fax : +91 124 4127776 Haryana, (INDIA)
Fax : +39 049 879 82 28
e-mail : info@jsssteelitalia.com e-mail : info@inoxmarketservice.it

Bangaluru
Phone : 08010938860
e-mail : info@jsssteelitalia.com

Pune
Phone : 08010938859
e-mail : info@jsssteelitalia.com

www.jsssteelitalia.com
Introduction
J.S.S. Steelitalia Ltd. is the amalgamation of the best of services from Inox Market Services s.r.l, Jensita Holdings of Italy and
Jindal Stainless Steelway. This has put the seal on the dominance of J.S.S. Steelitalia in the stainless steel tube and pipe JSSSL Tubes for Automotive Segment
industry. Behind its success, what lies at the heart are its top-notch technology, unmatchable expertise and unwavering focus
on its customers’ requirements.
J.S.S. Steelitalia is known beyond borders for its incredible range of stainless Major application of J.S.S. Steelitalia tubes in 400 series & 300 series of grades is for exhaust system of
steel tubes and pipes in round, square, rectangular and NB sizes with varied two wheelers, four wheelers and safety guards.
types of finishes (upto 1000 grit mirror finish). The credit of this accomplishment goes to Inox As one of the leading source of tubes for exhaust system, J.S.S. Steelitalia has established its name in the market
Market Services s.r.l for its expertise, Jensita Holdings for processing and distribution of stainless steel tubes worldwide and within a short span. We are the leading suppliers to various customers in two wheelers and four wheelers
Jindal Stainless Steelway for integrating back-end services. The company has already started exporting its products to segment.
countries like Mexico and Italy, to name a few. J.S.S. Steelitalia is a TS: 16949 certified organization, fully equipped to produce quality tubular products required
The state-of-the-art plant in Gurgaon, near New Delhi is equipped with one of the finest polishing mills and tube mills employing for exhaust system and has all the technical capabilities to meet critical requirements.
high frequency induction welding technologies from OTO mills, Italy. The company has recently installed two TIG welding
machines from Olma, Italy, which further helps offering its customer a complete range of products. Moreover, the company
follows stringent quality systems, ultramodern testing and inspection to make sure that only the best of products reach its customers.
Various Applications- Exhaust System

Some Test Samples of 409L Grade

Quality Objectives
An ISO-9001:2008 certified company, J.S.S. Steelitalia Ltd. has created benchmarks
in the industry in terms of quality maintenance and product improvement. With its zeal
to meet the ever-changing quality demands of its customers, the company insists on
maintaining world-class quality standards in all its products. And the same is accentu-
ated by the work culture that thrives in its workforce. There is total involvement of its
employees in meeting the quality objectives as laid down in the company’s quality
management system.

www.jsssteelitalia.com
1
 Process Flow Chart

DOUBLE DE-COILER STRIP JOINER FORMING SECTION FINN PASS SECTION HF WELDING SECTION EXTERNAL SCARFING SECTION SIZING SECTION ETC SECTION

When it comes to perfect surface finish, straightness and roundness,

the product range of J.S.S. Steelitalia Ltd. becomes the preferred
choice of everyone. The company is not only equipped with ultramod-
ern laboratory and testing equipments but also capable of conducting
TURK HEAD SECTION CUT OFF PACKING FINISHED PRODUCTS
Ready for despatch
macro as well as micro examination of samples.
A skill-set of engineers and technicians is dedicated for conducting and
evaluating various tests. Adhering to international standards, physical
Strength and Capabilities Research & as well as chemical testing is done in the state-of-the-art laboratory.

Development Not just this, the company also facilitates a full range of mechanical
testing.
• State-of-the-art plant at Gurgaon, Haryana
Not compromising on quality at any cost, the company uses special
• Finest quality welded tubes/pipes
testing equipment for detecting surface and sub-surface defects in both
• One-stop-shop for varied stainless steel tubes’ dimensions longitudinal as well as transverse orientations. Online eddy current
• Tailored dimensions testing is also conducted under the supervision of the experts
Industries We Serve
• Cost reduction

• Improved cycle time and productivity • Automobile ancillaries

Quality Assurance Test
• Welding speed as high as 120 meters per minute • Rail coach ancillaries
Flange Test
• Rapid tool/roll change system (RTC) • Hardware manufacturing
• Hardness Test (Rockwell & Vickers)
• Decorative furniture manufacturing
• Operational flexibility of tube mills • Reverse Flattening Test
• General engineering manufacturing
• Better inventory management • Flaring Test
• Sugar industry
• Online automatic packaging • Flattening Test
• Steel furniture
• Eddy Current Test
• Online number counter and weighing arrangement • Structural metalwork
• Roughness Test
• Hexagonal stocking
• Grade Analyser Test
• Tensile Test

www.jsssteelitalia.com
2 3
 Weight Chart - Round Pipes
Outside Diameter (mm) Weight (kg/mt) Wall Thickness (mm) Outside Diameter (mm) Weight (kg/mt) Wall Thickness (mm)
0.40 0.45 0.50 0.60 0.70 0.75 0.80 0.90 1 1.2 1.5 1.6 2 2.5 2.6 3 3.2 3.6 4 0.40 0.45 0.50 0.60 0.70 0.75 0.80 0.90 1 1.2 1.5 1.6 2 2.5 2.6 3 3.2 3.6 4
6.00 0.056 0.063 0.069 0.081 0.125 42.70 1.044 1.247 1.547 1.647 2.038 2.517 2.611 2.982 3.165 3.525 3.876
7.20 0.068 0.076 0.084 0.100 43.00 1.052 1.256 1.559 1.659 2.053 2.535
7.50 0.072 0.080 0.088 0.104 44.45 1.088 1.300 1.613 1.717 2.126 2.626 2.725 3.114
8.00 0.077 0.085 0.094 0.112 0.128 0.137 0.145 0.161 0.175 44.50 1.089 1.301 1.615 1.719 2.128 2.629 2.728 3.117
9.50 0.091 0.102 0.113 0.134 0.155 0.165 0.175
45.00 1.102 1.316 1.634 1.739 2.153 2.661
10.00 0.097 0.108 0.119 0.142 0.164 0.175 0.185 0.206 0.225
48.30 1.184 1.415 1.758 1.871 2.319 2.867 2.975 3.403 3.614 4.029 4.437
12.00 0.117 0.145 0.172 0.199 0.212 0.225 0.251 0.275 0.325 0.394
48.60 1.192 1.424 1.769 1.883 2.334 2.886 2.995 3.425
12.70 0.124 0.153 0.182 0.211 0.225
13.30 0.130 0.161 0.192 0.222 0.237 0.251 0.280 50.00 1.227 1.466 1.822 1.939 2.404 2.974 3.086 3.531 3.750 4.183 4.607
13.50 0.132 0.163 0.195 0.225 0.240 0.255 0.285 50.80 1.247 1.490 1.852 1.971 2.444 3.024 3.138 3.591 3.814 4.255 4.687
14.00 0.137 0.170 0.202 0.234 0.250 0.265 0.296 0.326 0.385 0.470 51.00 1.252 1.496 1.859 1.979 2.454 3.036 3.151 3.606 3.830 4.273 4.708
14.80 0.145 0.180 0.214 0.248 0.265 52.00 1.277 1.526 1.897 2.019 2.504 3.099
15.00 0.147 0.182 0.217 0.252 0.269 0.286 0.319 0.351 0.415 0.507 53.00 1.302 1.556 1.934 2.059 2.554 3.161 3.281 3.756 3.990
15.70 0.154 0.191 0.228 0.264 0.282 0.300 0.335
54.00 1.327 1.587 1.972 2.099 2.604 3.224 3.346 3.831 4.071
15.88 0.155 0.193 0.230 0.266 0.284 0.302 0.338
55.50 1.365 1.632 2.028 2.159 2.679 3.318 3.444 3.944
16.00 0.157 0.195 0.232 0.269 0.287 0.306 0.342 0.376 0.445 0.545 0.577 0.701
57.00 1.402 1.677 2.085 2.220 2.754 3.412 3.542 4.056 4.311 4.814 3.508
17.00 0.167 0.207 0.247 0.287 0.306 0.326 0.364
17.20 0.168 0.209 0.249 0.289 0.309 0.367 0.406 0.481 0.590 0.625 0.761 60.30 1.485 1.776 2.209 2.352 2.920 3.618 3.757 4.304 4.575 5.111 5.639
18.00 0.177 0.220 0.262 0.304 0.325 0.346 0.387 0.426 0.505 0.620 0.657 0.801 0.970 63.50 1.565 1.872 2.329 2.480 3.080 3.819 3.965 4.545 4.832 5.400 5.960
19.00 0.187 0.232 0.277 0.322 0.344 0.366 0.409 70.00 1.728 2.067 2.573 2.740 3.405 4.226 4.388 5.033 5.353 5.986 6.611
19.05 0.187 0.232 0.277 0.322 0.344 0.366 0.409 0.452 0.536 0.659 0.699 0.854 1.036 73.50 1.815 2.172 2.704 2.881 3.581 4.445 4.616 5.296 5.633 6.301 6.961
20.00 0.197 0.245 0.293 0.340 0.363 0.386 0.432 0.476 0.565 0.695 0.737 0.901 1.096 1.133 1.277 76.10 1.881 2.251 2.802 2.985 3.711 4.607 4.785 5.491 5.841 6.535 7.222
21.00 0.207 0.258 0.308 0.357 0.382 0.406 0.455
76.20 1.883 2.254 2.806 2.989 3.716 4.614 4.792 5.499 5.849 6.544 7.232
21.30 0.210 0.261 0.312 0.362 0.387 0.412 0.461 0.508 0.604 0.714 0.789 0.967 1.177 1.217 1.375
80.00 2.368 2.948 3.141 3.906 4.852 5.039 5.784 6.154 6.887 7.612
22.00 0.270 0.323 0.375 0.401 0.426 0.477 0.526 0.625 0.770 0.817 1.002
83.00 2.458 3.061 3.261 4.056 5.039 5.234 6.010 6.394 7.157 7.913
22.23 0.272 0.325 0.377 0.403 0.429 0.481 0.532 0.632 0.779 0.827 1.013
23.00 0.283 0.338 0.392 0.419 0.446 0.500 84.00 2.488 3.099 3.301 4.107 5.102 5.299 6.085 6.474 7.248 8.013
24.00 0.295 0.353 0.410 0.438 0.466 0.523 85.00 2.518 3.136 3.341 4.157 5.165 5.365 6.160 6.554 7.338 8.113
25.00 0.308 0.368 0.428 0.457 0.487 0.545 0.601 0.715 0.883 0.937 1.125 1.409 1.458 1.653 88.90 2.635 3.283 3.498 4.352 5.409 5.618 6.453 6.867 7.689 8.504
25.40 0.317 0.378 0.440 0.470 0.501 0.561 0.611 0.727 0.898 0.954 1.172 1.434 1.484 1.683 95.00 3.512 3.742 4.657 5.791 6.016 6.911 7.356 8.239 9.115
26.00 0.320 0.383 0.445 0.476 0.507 0.568 101.60 3.760 4.006 4.988 6.204 6.445 7.407 7.885 8.834 9.776
26.90 0.333 0.398 0.463 0.495 0.527 0.590 0.649 0.772 0.954 1.014 1.247 1.527 1.582 1.795
103.00 3.812 4.062 5.058 6.291 6.536 7.512 7.997 8.960 9.916
27.00 0.333 0.398 0.463 0.495 0.527 0.590
104.00 3.850 4.103 5.018 6.354 6.602 7.587 8.077 9.050 10.016
28.00 0.346 0.413 0.480 0.514 0.547 0.613 0.676 0.805 0.995 1.058 1.302
108.00 4.000 4.263 5.308 6.604 6.862 7.888 8.397 9.411 10.417
28.58 0.352 0.420 0.489 0.523 0.556 0.624 0.691 0.823 1.017 1.081 1.331
30.00 0.371 0.443 0.515 0.551 0.587 0.658 114.30 4.237 4.515 5.624 6.999 7.272 8.361 8.902 9.979 1.048
31.75 0.770 0.918 1.136 1.208 1.490 1.831 1.898 2.160 129.00 4.789 5.104 6.360 7.919 8.229 9.465 10.080 11.304 12.520
31.80 0.396 0.474 0.551 0.589 0.627 0.703 139.70 5.191 5.533 6.896 8.589 8.926 10.269 10.937 12.269 13.592
32.00 0.396 0.474 0.551 0.589 0.627 0.703 0.776 0.925 1.146 1.218 1.502 1.847 1.914 2.178 153.00 5.690 6.066 7.562 9.421 8.792 11.268 12.003 13.468 14.924
33.00 0.956 1.183 1.258 1.552 154.00 7.612 9.484 9.857 11.343 12.083 13.558 15.024
33.40 0.811 0.968 1.198 1.274 1.573 1.934 2.005 2.284
155.00 9.546
33.70 0.819 0.977 1.209 1.286 1.588 1.953 2.025 2.306 2.444
156.00 7.712 9.609 9.987 11.493 12.244 13.738 15.24
34.00 0.826 0.986 1.221 1.298 1.603 1.972
168.30 8.328 10.379 10.788 12.417 13.229 14.847 16.456
34.93 0.850 1.014 1.256 1.335 1.649 2.030
35.00 0.851 1.016 1.258 1.338 1.653 2.035 204.00 10.116 12.614 13.112 15.099 16.090 18.065 20.032
38.10 0.929 1.109 1.375 1.462 1.808 2.229 2.311 2.637 206.00 10.216 12.739 13.242 15.249 156.250 18.245 20.232
40.00 0.977 1.166 1.446 1.538 1.903 2.348 2.435 2.779 219.10 10.872 13.559 14.059 16.233 17.300 19.426 21.544
41.30 0.999 1.193 1.481 1.949 2.406 2.850 254.00 12.620 15.744 16.367 18.855 20.096 22.572 25.040
42.00 1.226 1.521 1.619 2.003 255.00 12.670 15.807 16.432 18.930 20.176 22.662 24.140
42.40 1.037 1.238 1.536 1.635 2.023 2.498 2.591 2.960 3.141 3.498 3.446
256.00 12.720 15.896 16.497 19.005 20.256 22.752 25.240
Note: Sizes currently manufactured by us are marked bold Note: Sizes currently manufactured by us are marked bold
www.jsssteelitalia.com
4 5
 Weight Chart - Square Pipes
Wall thickness (mm) Wall thickness (mm)
Diamension Diamension
Welded omamental tubes according to ASTM A 554-DIN 2395-NFA 49647 Welded omamental tubes according to ASTM A 554-DIN 2395-NFA 49647
A mm B mm 1 1.2 1.5 2 2.5 3 4 5 6 A mm B mm 1 1.2 1.5 2 2.5 3 4 5 6
12 12 0.358 45 45 1.410 1.686 2.097 2.771 3.432 4.081
15 15 0.453 0.538 0.661 50 50 1.878 2.336 3.090 3.831 4.559 5.979 7.349
16 16 0.485 0.576 0.709 60 60 2.254 2.814 3.728 4.628 5.516 7.255 8.943
19 19 0.567 0.675 0.832 1.090 70 70 3.293 4.366 5.426 6.473 8.531 10.538
20 20 0.613 0.729 0.901 1.176 80 80 3.771 5.004 6.223 7.430 9.807 12.133 14.410
22 22 0.677 0.806 0.996 1.303 100 100 4.728 6.279 7.818 9.344 12.359 15.323 18.237
25 25 0.772 0.921 1.140 1.495 1.837 2.167 120 120 7.555 9.413 11.258 14.910 18.513 22.065
30 30 0.932 1.112 1.379 1.814 2.236 2.645 140 140 8.831 11.008 13.172 17.462 21.703 25.893

Weight Chart - NB Sizes

32 32 0.960 1.150 1.420 1.870 2.310 2.740 150 150 9.469 11.805 14.129 18.738 23.298 27.807
35 35 1.091 1.304 1.618 2.133 2.635 3.124 200 200 12.659 15.793 18.913 25.118 31.272 37.376
40 40 1.251 1.495 1.858 2.452 3.033 3.602 4.703

ROUNDED TUBES - Dimensions according to ASA B, 36.10 - B.3619 - BS. 1600 Weight (kg/mt) Wall Thickness (mm)

SCHED. 5S SCHED. 10S SCHED. 40S

Weight Chart - Rectangular Pipes ND Nom.¢

6
OD Inches
1/8
OD mm
10.24
SPESS.
-
kg/m
-
SPESS.
1.24
kg/m
0.29
SPESS
1.73
kg/m
0.37
8 1/4 13.72 - - 1.65 0.50 2.24 0.64
Diamension Wall thickness (mm) Diamension Wall thickness (mm) 10 3/8 17.15 - - 1.65 0.63 2.31 0.87
Welded omamental tubes according to ASTM A 554-DIN 2395-NFA 49647 Welded omamental tubes according to ASTM A 554-DIN 2395-NFA 49647
15 1/2 21.34 1.65 0.82 2.11 1.02 2.70 1.29
A mm B mm 1 1.2 1.5 2 2.5 3 4 5 6 A mm B mm 1 1.2 1.5 2 2.5 3 4 5 6
20 3/4 26.67 1.65 1.05 2.11 1.31 2.78 1.71
15 10 0.370 0.440 0.540 60 30 1.410 1.686 2.097 2.771 3.432 4.081
25 1 33.40 1.65 1.32 2.77 2.12 3.38 2.55
20 10 0.453 0.538 0.661 60 40 1.878 2.336 3.090 3.831 4.559
32 1 1/4 42.16 1.65 1.68 2.77 2.74 3.56 3.45
20 15 0.533 0.634 0.781 1.016 70 20 1.650 2.050 2.710 3.360 4.000
40 1 1/2 48.26 1.65 1.94 2.77 3.17 3.68 4.13
25 10 0.533 0.634 0.781 70 30 2.290 3.030 3.760 4.480
50 2 60.30 1.65 2.45 2.77 4.01 3.91 5.54
25 10 0.613 0.729 0.901 1.176 70 40 2.575 3.409 4.229 5.038 65 2 1/2 73.03 2.11 3.76 3.05 5.36 5.16 8.79
25 20 0.693 0.825 1.020 1.335 75 25 1.878 2.336 3.090 3.831 4.559 80 3 88.90 2.11 4.60 3.05 6.57 5.49 11.51
26 13 0.613 0.729 0.901 1.176 80 20 2.290 3.030 3.760 4.480 90 3 1/2 101.60 2.11 5.28 3.05 7.54 5.74 13.83
30 10 0.613 0.729 0.901 1.176 80 30 2.530 3.350 4.160 4.960 100 4 114.30 2.11 5.95 3.05 8.52 6.02 16.38
30 15 0.693 0.825 1.020 1.335 80 40 2.254 2.814 3.728 4.628 5.516 7.255 8.943 10.582 125 5 140.30 2.77 9.65 3.40 11.79 6.55 22.20
30 20 0.772 0.921 1.140 1.495 1.837 2.167 80 50 3.010 4.000 4.960 5.920 7.790 9.620 11.390 150 6 168.30 2.77 11.54 3.40 14.10 7.11 28.79
30 25 0.840 1.000 1.240 1.630 80 60 3.293 4.366 5.426 6.473 8.531 10.538 12.496 200 8 219.10 2.77 15.07 3.76 20.34 8.18 43.34
35 15 0.760 0.910 1.130 1.480 100 20 2.760 3.650 4.540 5.410
250 10 273.00 3.40 23.05 4.19 28.31 9.27 61.44

35 20 0.852 1.017 1.259 1.654 2.036 2.406

300 12 323.90 3.96 31.84 4.57 36.68 10.31 81.30
100 30 3.010 4.000 4.960 5.920
350 14 355.60 3.96 35.02 4.78 42.09 11.12 96.20
40 10 0.760 0.910 1.130 1.480 100 40 3.293 4.366 5.426 6.473 8.531 10.538 12.496
400 16 406.40 4.19 42.34 4.78 48.18 12.70 125.66
40 15 0.852 1.017 1.259 1.654 2.036 2.406 100 50 3.532 4.685 5.824 6.952 9.169 11.336 13.453
450 18 457.20 4.19 48.72 4.78 54.27 14.27 159.02
40 20 0.932 1.112 1.379 1.814 2.236 2.645 100 60 3.771 5.004 6.223 7.430 9.807 12.133 14.410
500 20 508.00 4.78 60.37 5.54 69.90 15.09 182.76
40 27 1.044 1.246 1.547 2.037 2.515 2.980 100 80 4.250 5.641 7.021 8.387 11.083 13.728 16.324
550 22 558.80 4.78 66.47 5.54 76.96
40 30 1.091 1.304 1.618 2.133 2.635 3.124 120 40 3.771 5.004 6.223 7.430 9.807 12.133 14.410 600 24 609.60 5.54 84.03 6.35 96.24 17.48 259.79
45 15 0.910 1.090 1.350 1.780 120 60 4.250 5.641 7.021 8.387 11.083 13.728 16.324 650 26 660.40 - - - - - -
45 20 0.990 1.180 1.460 1.920 120 80 4.728 6.279 7.818 9.344 12.359 15.323 18.237 700 28 711.20 - - - - - -
50 10 0.910 1.090 1.350 1.780 140 80 10.301 13.635 16.918 20.151 750 30 762.00 6.35 120.56 7.92 15.14 - -
50 20 1.091 1.304 1.618 2.133 2.635 3.124 150 50 9.344 12.359 15.323 18.237 800 32 812.60 - - - - 17.48 349.04
50 25 1.171 1.399 1.738 2.292 2.834 3.363 150 100 11.736 15.548 19.310 23.022 850 34 863.60 - - - - 17.48 371.28
50 30 1.251 1.495 1.858 2.452 3.033 3.602 160 80 11.258 14.910 18.513 22.065 900 36 914.40 - - - - 19.05 428.60
50 40 1.410 1.686 2.097 2.771 3.432 4.081 200 100 14.129 18.738 23.298 27.807
1000 40 1016.00 - - - - - -
Note: Sizes currently manufactured by us are marked bold
60 20 1.251 1.495 1.858 2.452 3.033 3.602 www.jsssteelitalia.com
6 Note: Sizes currently manufactured by us are marked bold 7
 ASTM - Specifications Chemical Composition
Specifications ASTM - A554 Dimensional Tolerance
Percentage .
A Round Tubes Outside Diameter (mm) Thickness (mm) Tolerance (mm) (+/-)
12.70 - 25.40 0.51 - 1.65 0.13
Stainless C Si Mn Cr Ni P S Other
12.70 - 25.40 1.65 - 3.40 0.25 Steel Grade Max Max Max Max Max Elements
25.40 - 38.10 0.64 - 1.65 0.20 Designation
25.40 - 38.10 1.65 - 3.40 0.25
38.10 - 50.80 1.65 - 3.40 0.25
SS 304 0.08 0.75 2.00 18.00 - 20.00 8.00 - 10.50 0.45 0.030 -
38.10 - 50.80 1.24 - 2.11 0.28 SS 304L 0.03 0.75 2.00 18.00 - 20.00 8.00 - 12.00 0.45 0.030 -
38.10 - 50.80 2.11 - 3.78 0.30
50.80 - 63.50 0.81 - 1.65 0.30 SS 310 0.25 1.50 2.00 24.00 - 26.00 19.80 - 12.00 0.45 0.030 -
50.80 - 63.50 1.65 - 2.77 0.33 SS 316 0.08 0.75 2.00 16.00 - 18.00 10.00 - 14.00 0.45 0.030 Mo2.00/3.00
50.80 - 63.50 2.77 - 4.19 0.36
63.50 - 88.90 0.81 - 4.19 0.36 SS 316L 0.03 0.75 2.00 16.00 - 18.00 10.00 - 14.00 0.45 0.030 Mo2.00/3.00
B Section Tubes Width x Height (mm) /OD
12.70 - 32 All 0.38
409L 0.03 1.00 1.00 10.50 - 11.70 0.50 0.40 0.020 Ti - 0.75
32 - 63.50 All 0.51 409M 0.03 1.00 1.50 10.80 - 12.50 1.50 0.30 0.030 Ti - 0.75
63.50 and above All 0.76
C Radius Corner Thickness wise (mm) J1/JSL - AUS 0.08 0.75 8.00 16.00 - 18.00 4.00 - 6.00 0.07 0.01 -
0.5 - 1.24 2.4 J4 0.10 0.75 10.00 15.00 - 16.00 1.00 - 2.00 0.08 0.01 -
1.24 - 15 3.2
1.65 - 2.11 3.6 JSL - T 0.10 0.75 10.00 14.50 - 16.00 0.25 - 0.35 0.10 0.01 -
2.11 - 2.42 4.6

Applications
2.42 - 2.77 5.2
2.77 - 3.4 5.6
D Twist Tolerance Tube Diameter (mm) Tolerance (mm) / per meter
12.70 - 38.10 2.1
38.10 - 63.50 2.6
63.50 - 101.60 3.5
E Length always in + side for 6 meters min. 6 mm.
F Thickness Tolerance +/- 10%

Specifications Allowable Outside Allowable Wall Extra Length

Testing
Diameter Variation (mm) Thickness Variation Tolerance (mm)
over under %over %under over under
(mm) (mm) (mm) (mm) (mm) (mm)
ASTM - A269 Up to 12.7 0.13 0.13 15 15 3.2 0 Chemical Analysis
Seamless & 12.7 - 38.1excl 0.13 0.13 10 10 3.2 0 Flaring Test (Seamless only)
Welded Tubing 38.1 - 88.9 excl 0.25 0.25 10 10 4.8 0 Flange Test (Welded only)
for General 88.9 - 139.7 excl 0.38 0.38 10 10 4.8 0 Hardness Test
Service 139.7 - 203.2 excl 0.76 0.76 10 10 4.8 0 Reverse Flattening
Test (Welded only)
203.2 - 304.8 excl 1.01 1.01 10 10 4.8 0 100% Hydrostatic Test
304.8 - 355.6 excl 1.26 1.26 10 10 4.8 0 Refer to ASTM- A269
ASTM - A312 10.3 - 48.3 incl 0.4 0.8 6.4 0 Chemical Analysis
Seamless & Over 48.3 - 114.3 incl 0.8 0.8 Nominal Wall Mini. Wall 6.4 0 Tensile Test
Welded pipe Over 114.3 - 219.1 incl 1.6 0.8 Specified 12.5% under 6.4 0 Flattening Test
Over 219.1 - 457 incl 2.4 0.8 6.5 0 100% Hydrostatic Test
Over 457 - 660 incl 3.2 0.8 6.4 0 Grain Size
Over 660 - 884 incl 4.0 0.8 6.4 0
ASTM - A358 219.1 - 1250.0 (+)0% (-) 0% (+)0.3 Nominal Customer’s Chemical Analysis, Tensile Test,
Welded Pipe thickness Specification Bend Weld Test, 100%
Hydrostatic Test, Radiographic
Examination (as specified)
Refer to ASTM- A530 & A358
Note: For more details, refer respective ASTM Standards or please contact us.