Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    Sea Water RO Elements: Dimensions

    Uploaded by

    wahyu raharjo
    This document summarizes specifications for Toray's TM800F seawater reverse osmosis membrane elements. [1] It describes two element models, the TM820F-370 and TM820F-400, which have membrane areas of 370 and 400 square feet respectively. [2] The elements are rated for high salt rejection of 99.7% or more and product flow rates ranging from 6,700 to 9,000 gallons per day, depending on the model. [3] They are suitable for use in seawater desalination with a feed water pressure up to 1000 PSI and temperature up to 113°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sea Water RO Elements: Dimensions

    Uploaded by

    wahyu raharjo
    18 views2 pages
    This document summarizes specifications for Toray's TM800F seawater reverse osmosis membrane elements. [1] It describes two element models, the TM820F-370 and TM820F-400, which have membrane areas of 370 and 400 square feet respectively. [2] The elements are rated for high salt rejection of 99.7% or more and product flow rates ranging from 6,700 to 9,000 gallons per day, depending on the model. [3] They are suitable for use in seawater desalination with a feed water pressure up to 1000 PSI and temperature up to 113°F.

    Original Title

    Toray-TM820F-400

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes specifications for Toray's TM800F seawater reverse osmosis membrane elements. [1] It describes two element models, the TM820F-370 and TM820F-400, which have membrane areas of 370 and 400 square feet respectively. [2] The elements are rated for high salt rejection of 99.7% or more and product flow rates ranging from 6,700 to 9,000 gallons per day, depending on the model. [3] They are suitable for use in seawater desalination with a feed water pressure up to 1000 PSI and temperature up to 113°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views2 pages

    Sea Water RO Elements: Dimensions

    Uploaded by

    wahyu raharjo
    This document summarizes specifications for Toray's TM800F seawater reverse osmosis membrane elements. [1] It describes two element models, the TM820F-370 and TM820F-400, which have membrane areas of 370 and 400 square feet respectively. [2] The elements are rated for high salt rejection of 99.7% or more and product flow rates ranging from 6,700 to 9,000 gallons per day, depending on the model. [3] They are suitable for use in seawater desalination with a feed water pressure up to 1000 PSI and temperature up to 113°F.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Sea Water RO Elements

    TM800F
    Type Diameter Membrane Area Salt Rejection Product Flow Rate Feed Spacer
    Inch ft2(m2) % gpd(m3 / d) Thickness
    mil
    TM820F-370 8” 370(34) 99.70 8,300(31.4) 34 / 31
    TM820F-400 8” 400(37) 99.70 9,000(34.1) 34 / 28

    1. Membrane Type Cross Linked Fully Aromatic Polyamide Composite

    2. Test Conditions
    Feed Water Pressure 800 psi(5.52MPa)
    Feed Water Temperature 77°F(25℃)
    Feed Water Concentration 32,000 mg/l Nacl
    Recovery Rate 8%
    Feed Water pH 8
    3. Minimum Salt Rejection 99.5%
    4. Minimum Product Flow Rate 6,700gpd(25.3m3/d)(TM820F-370)
    7,200gpd(27.3m3/d)(TM820F-400)

    Dimensions

    All dimensions shown in Inches (millimeter).

    F Feed Water

    B Concentrated Brine

    Flow direction

    F B
    TM820F-370
    1.125(29)
    7.9(201)

    PERMEATE
    TM820F-400 F
    B

    40(1,016)
    Operating Limits
    Maximum Operating Pressure 1000psi (6.9 MPa)
    Maximum Feed Water Temperature 113°F (45℃)
    Maximum Feed Water SDI15 5
    Feed Water Chlorine Concentration Not detectable
    Feed Water pH Range, Continuous Operation 2-11
    Feed Water pH Range, Chemical Cleaning 1-12
    Maximum Pressure Drop per Element 20psi (0.14 MPa)
    Maximum Pressure Drop per Vessel 60psi (0.4 MPa)

    Operating Information
    1.For the recommended design range, please consult the latest Toray technical bulletin, design
    guidelines,computer design program, and/ or call an application specialist. If the operating limits giv-
    en in this Product Information Bulletin are not strictly followed, the Limited Warranty will be null and
    void.
    2. All elements are wet tested, treated with tested feed water solution, and then vacuum packed in
    oxygen barrier bags with deoxidant inside. To prevent biological growth during system shutdown,
    it is recommended to perform 30-60 minutes flushing of Toray elements with seawater once in every
    two days.
    3.The presence of free chlorine and other oxidizing agents under certain conditions, such as heavy metals
    which acts as oxidation catalyst in the feed water will cause unexpected oxidation of the membrane. It is
    strongly recommended to remove these oxidizing agents contained in feed water before operating RO
    system.
    4. Permeate from the first hour of operation shall be discarded.
    5.The customer is fully responsible for the effects of chemicals that are incompatible with the elements.
    Their use will void the element Limited Warranty.

    Notice
    1. Toray accepts no responsibility for results obtained by the application of this information or the safety or
    suitability of Toray's products, either alone or in combination with other products. Users are advised to
    make their own tests to determine the safety and suitability of each product combination for their own
    purposes.
    2. All data may change without prior notice, due to technical modifications or production changes.

    Dec. 2012

    You might also like