Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 79 views

    TM 800 A

    Uploaded by

    ma_princess7840
    This document summarizes the specifications of Toray's TM800A seawater reverse osmosis membrane elements. The elements come in 370 and 400 square foot configurations with a minimum salt rejection of 99.5% and product flow rates ranging between 4,400 to 6,000 gallons per day. The membrane is made of a cross-linked fully aromatic polyamide composite designed to operate under pressures up to 1200 PSI with a maximum feed water temperature of 113°F.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    TM 800 A

    Uploaded by

    ma_princess7840
    79 views2 pages
    This document summarizes the specifications of Toray's TM800A seawater reverse osmosis membrane elements. The elements come in 370 and 400 square foot configurations with a minimum salt rejection of 99.5% and product flow rates ranging between 4,400 to 6,000 gallons per day. The membrane is made of a cross-linked fully aromatic polyamide composite designed to operate under pressures up to 1200 PSI with a maximum feed water temperature of 113°F.

    Original Title

    tm800a

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications of Toray's TM800A seawater reverse osmosis membrane elements. The elements come in 370 and 400 square foot configurations with a minimum salt rejection of 99.5% and product flow rates ranging between 4,400 to 6,000 gallons per day. The membrane is made of a cross-linked fully aromatic polyamide composite designed to operate under pressures up to 1200 PSI with a maximum feed water temperature of 113°F.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    79 views2 pages

    TM 800 A

    Uploaded by

    ma_princess7840
    This document summarizes the specifications of Toray's TM800A seawater reverse osmosis membrane elements. The elements come in 370 and 400 square foot configurations with a minimum salt rejection of 99.5% and product flow rates ranging between 4,400 to 6,000 gallons per day. The membrane is made of a cross-linked fully aromatic polyamide composite designed to operate under pressures up to 1200 PSI with a maximum feed water temperature of 113°F.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Sea Water RO Elements

    TM800A

    Type Diameter Membrane Area Salt Rejection Product Flow Rate


    inch ft2 (m2) % gpd (m3/d)

    TM820A-370 8" 370 (34) 99.75 5,600 (21.2)


    TM820A-400 8" 400 (37) 99.75 6,000 (22.7)

    1. Membrane Type Cross Linked Fully Aromatic Polyamide Composite


    2. Test Conditions
    Feed Water Pressure 800 psi (5.52 MPa)
    Feed Water Temperature 77 ˚F (25 ˚C)
    Feed Water Concentration 32,000 mg/l NaCl
    Recovery Rate 8 %
    Feed Water pH 8
    3. Minimum Salt Rejection 99.5 %
    4. Minimum Product Flow Rate 4,400 gpd ( 16.7 m3/d) (TM820A-370)
    4,800 gpd ( 18.2 m3/d) (TM820A-400)
    5. Boron Rejection 93% at pH8
    (typical value) (5mg/l Boron added to Feed water)

    Dimensions

    All dimensions shown in inches (millimeter).


    Feed Water

    Concentrated Brine

    Flow direction
    1.125 (29)

    7.9 (201)

    TM820A-370
    TM820A-400

    40 (1016)

    TM800A
    Operating Limits

    Maximum Operating Pressure 1200 psi (8.3 MPa)


    Maximum Feed Water Temperature 113 ˚F (45 ˚C)
    Maximum Feed Water SDI15 5
    Feed Water Chlorine Concentration Not Detectable
    Feed Water pH Range, Continuous Operation 2-11
    Feed Water pH Range, Chemical Cleaning 1-12
    Maximum Pressure Drop per Element 20 psi (0.14 MPa)
    Maximum Pressure Drop per Vessel 60 psi (0.4 MPa)

    Operating Information

    1. For the recommended design range, please consult the latest Toray technical bulletin, design guide-
    lines, computer design program, and/or call an application specialist. If the operating limits giv-
    en in this Product Information Bulletin are not strictly followed, the Limited Warranty will be null
    and void.
    2. All elements are wet tested, treated with tested feed water solution, and then vacuum packed in
    oxygen barrier bags with deoxidant inside. To prevent biological growth during system shutdown,
    it is recommended to perform 30-60 minutes flushing of Toray elements with seawater once in every
    two days.
    3. Permeate from the first hour of operation shall be discarded.
    4. The customer is fully responsible for the effects of chemicals that are incompatible with the ele-
    ments. Their use will void the element Limited Warranty.

    Notice

    1. Toray accepts no responsibility for results obtained by the application of this information or the
    safety or suitability of Toray's products, either alone or in combination with other products. Users
    are advised to make their own tests to determine the safety and suitability of each product combi-
    nation for their own purposes.
    2. All data may change without prior notice, due to technical modifications or production changes.

    You might also like