Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    Toray SUL G20FTS Reverse Osmosis Element L

    Uploaded by

    GRUPO FILTRANTES
    This document provides specifications for the SUL-G20FTS spiral wound reverse osmosis membrane element from Lenntech. Key details include: - The membrane type is a cross linked fully aromatic polyamide composite. - Single element performance shows 99.5% NaCl rejection and a flow rate of 36 m3/day. - Element dimensions are provided along with design and operating conditions/recommendations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Toray SUL G20FTS Reverse Osmosis Element L

    Uploaded by

    GRUPO FILTRANTES
    31 views2 pages
    This document provides specifications for the SUL-G20FTS spiral wound reverse osmosis membrane element from Lenntech. Key details include: - The membrane type is a cross linked fully aromatic polyamide composite. - Single element performance shows 99.5% NaCl rejection and a flow rate of 36 m3/day. - Element dimensions are provided along with design and operating conditions/recommendations.

    Original Description:

    FICHA TECNICA MEMBRANA

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the SUL-G20FTS spiral wound reverse osmosis membrane element from Lenntech. Key details include: - The membrane type is a cross linked fully aromatic polyamide composite. - Single element performance shows 99.5% NaCl rejection and a flow rate of 36 m3/day. - Element dimensions are provided along with design and operating conditions/recommendations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views2 pages

    Toray SUL G20FTS Reverse Osmosis Element L

    Uploaded by

    GRUPO FILTRANTES
    This document provides specifications for the SUL-G20FTS spiral wound reverse osmosis membrane element from Lenntech. Key details include: - The membrane type is a cross linked fully aromatic polyamide composite. - Single element performance shows 99.5% NaCl rejection and a flow rate of 36 m3/day. - Element dimensions are provided along with design and operating conditions/recommendations.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Lenntech

    info@lenntech.com Tel. +31-152-610-900


    www.lenntech.com Fax. +31-152-616-289

    MODEL SUL-G20FTS

    Membrane Type Cross Linked Fully Aromatic Polyamide Composite


    Element Configuration Spiral Wound

    Performance Specification

    NaCl Solution
    Salt Rejection 1 99.5 %2
    Product Flow Rate 1 36m3 day (9500 gpd) 3

    Notes :
    1. Test Conditions
    Feed Water Pressure 0.75 MPa (110psi)
    Feed Water Temperature 25 C (77 F)
    Feed Water Concentration 500 mg/ as NaCl
    Brine Flow Rate 80 /min. (21 gpm)
    Feed Water pH 6.5
    2. 99.0 % minimum*
    3. 29 m3/day ( 7660 gpd) minimum* *For any single element

    Dimensions

    Flow direction 22

    F B
    201
    32

    Permeate

    F B

    11 11
    1016

    F Feed Water, B Concentrated Brine. All dimensions shown in millimeters.


    SUL-G20FTS
    2/2
    JUNE/2004

    Design Conditions
    Recommended 1

    Feed Water Pressure 2,3 1.0 MPa (150 psi)

    Feed Water Temperature 4 35 C (95 F)

    Feed Water Turbidity ( SDI ) 2,5 4

    Feed Water pH Range, Continuous Operation 6 3 9

    Feed Water pH Range, Chemical Cleaning 7 2 11

    Feed Flow Rate per Vessel 200 /min. (52.8 gpm)

    Brine Flow Rate per Vessel 9 40 /min. (10.6 gpm)

    Brine/Permeate Flow Ratio 8,9 6

    Pressure Drop ( per Element ) 10 0.10 MPa (14 psi)

    Pressure Drop ( per Vessel ) 10 0.20 MPa (29 psi)

    Notes:
    1. The recommended design range is operational and design conditions under not so much fouling
    and scaling. If the SUL-series element are operated outside of the recommended design range,
    the effective membrane life may be reduced. Refer to the Toray technical bulletin, or contact
    Toray or local distributor for design guidelines and further information.
    2. High flux operation ( operation under high permeate flow rate per single element ) on feed water
    turbidity greater than 3 or 4 SDI generally results in frequent cleaning requirements. Operating
    pressure should be selected to maintain the flux rate, or permeate flow rate per single element.
    3. Maximum Feed Water Pressure 4.1 MPa ( 600 psi )
    4. Maximum Sanitization Temperature 85 C ( 185 F ).
    5. SDI = Silt Density Index measured according to ASTM D4189.
    6. Feed and brine water must meet these range.
    7. Cleaning chemicals shall be followed to Toray's technical bulletins.
    8. Ratio at last element.
    9. This figure is reducible when there is less possibility of fouling and scaling.
    10. Element(s) must be cleaned when pressure drop increases up to 1.5 times of initial value.

    * Sterilization must follow guidances in Toray's technical bulletin.

    We accept no responsibility for results obtained by the application of this information or the safety or suitability
    of our products, either alone or in combination with other products. Users are advised to make their own tests to
    determine the safety and suitability of each such product or product combination for their own purposes.

    Lenntech
    info@lenntech.com Tel. +31-152-610-900
    www.lenntech.com Fax. +31-152-616-289

    You might also like