Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 137 views

    Assignment

    Uploaded by

    Awol Abdu
    1) The document is an assignment submitted by Tebeje Tesfaw analyzing the relationship between flux linkage (λ) and current (i) in an electromagnetic system. 2) The student is asked to calculate the electromechanical force (fe) on the moving part of the system for given values of current (i = 2A) and air gap length (x = 10cm) using both the energy method and co-energy method. 3) Using the energy method, the student calculates fe to be -226.274N, indicating a force pulling the moving member towards the stationary member. Using the co-energy method, the student's calculation also yields a value of -226.274N for

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Assignment

    Uploaded by

    Awol Abdu
    137 views3 pages
    1) The document is an assignment submitted by Tebeje Tesfaw analyzing the relationship between flux linkage (λ) and current (i) in an electromagnetic system. 2) The student is asked to calculate the electromechanical force (fe) on the moving part of the system for given values of current (i = 2A) and air gap length (x = 10cm) using both the energy method and co-energy method. 3) Using the energy method, the student calculates fe to be -226.274N, indicating a force pulling the moving member towards the stationary member. Using the co-energy method, the student's calculation also yields a value of -226.274N for

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document is an assignment submitted by Tebeje Tesfaw analyzing the relationship between flux linkage (λ) and current (i) in an electromagnetic system. 2) The student is asked to calculate the electromechanical force (fe) on the moving part of the system for given values of current (i = 2A) and air gap length (x = 10cm) using both the energy method and co-energy method. 3) Using the energy method, the student calculates fe to be -226.274N, indicating a force pulling the moving member towards the stationary member. Using the co-energy method, the student's calculation also yields a value of -226.274N for

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    137 views3 pages

    Assignment

    Uploaded by

    Awol Abdu
    1) The document is an assignment submitted by Tebeje Tesfaw analyzing the relationship between flux linkage (λ) and current (i) in an electromagnetic system. 2) The student is asked to calculate the electromechanical force (fe) on the moving part of the system for given values of current (i = 2A) and air gap length (x = 10cm) using both the energy method and co-energy method. 3) Using the energy method, the student calculates fe to be -226.274N, indicating a force pulling the moving member towards the stationary member. Using the co-energy method, the student's calculation also yields a value of -226.274N for

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    COLLEGE OF ELECTRICAL AND MECHANICAL

    ENGINEERING
    DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING
    (M.Sc. in power engineering)
    Analysis of Electric Machinery and Drive Systems assignment-I
    BY:
    TEBEJE TESFAW ID No GSR 245/12

    Submitted to Dr. Kemal E.

    Submission date: 21/08/2012 E.C


    Assignment
    1. The 𝜆 − 𝑖 relationship for an electromagnetic system is given by
    1.2𝑖 1/2
    𝜆(𝑥, 𝑖) =
    𝑥
    Where, 𝑥 is the air gap length. For current 𝑖 = 2𝐴 A and 𝑥 = 10𝑐𝑚, determine the mechanical
    force 𝑓𝑒 on the moving part
    a) Using the energy of the system (𝑊𝑓 ).
    b) Using the co-energy of the system (𝑊𝑐 ).
    c) Compare the results obtains under a) and b)

    Solution:
    Given: the input current i=2A
    The air gap length x=10cm
    Lambda with the function of input current air gap length
    Required:
    The electromechanical force fe on the moving part
    a. Using the energy of the system (𝑊𝑓 ):
    𝜕𝜆(𝑥,𝑖) 𝜕
    From the electromechanical force fe equation fe (i, x) = i − 𝑊𝑓 (𝑖, 𝑥)
    𝜕𝑥 𝜕𝑥
    𝜕𝜆(𝑖,𝑥 )
    where: 𝑊𝑓 (𝑖, 𝑥 )=∫ 𝑖 𝑑𝑖
    𝜕𝑖
    𝜕 1.2𝑖1/2 1.2𝑖1/2 1.2𝑖3/2
    : 𝑊𝑓 (𝑖, 𝑥 ) = ∫ 𝑖 ( ) 𝑑𝑖= ∫ 𝑑𝑖 =
    𝜕𝑖 𝑥 2𝑥 3𝑥
    𝜕 −1.2𝑖 3/2
    Now: 𝑊𝑓 (𝑖, 𝑥 ) = ………………………………………...1
    𝜕𝑥 3𝑥2
    𝜕𝜆(𝑥,𝑖) 𝜕 1.2𝑖1/2 −1.2𝑖 3/2
    Secondly, = i =𝑖 ( )= ……………………………2
    𝜕𝑥 𝜕𝑥 𝑥 𝑥2
    Therefore, from equa (1) and (2)
    −1.2𝑖 3/2 1.2𝑖 3/2 −0.8𝑖 3/2
    fe (2,0.1) = + = = -226.274 N
    𝑥2 3𝑥2 𝑥2

    The electromechanical force fe is negative; it pulls the moving member to the


    stationary member. Therefore, the electromechanical force is 226.274N.
    b. Using co-energy system
    The electromechanical force is given as:
    𝜕
    fe (i, x) = 𝑊𝐶 (𝑖, 𝑥) ……where 𝑊𝐶 (𝑖, 𝑥 ) = ∫ 𝜆(𝑖, 𝑥) 𝑑𝑖
    𝜕𝑥
    3
    1.2𝑖1/2 2×1.2𝑖2
    𝑊𝐶 (𝑖, 𝑥 ) = ∫ 𝑑𝑖 =
    𝑥 3𝑥
    𝜕
    Therefore: fe(𝑖, 𝑥) = 𝑊𝐶 (𝑖, 𝑥)
    𝜕𝑥
    3
    𝜕 2×1.2𝑖 2 −0.8𝑖 3/2
    fe (i, x) = ( )= fe (2, 0.1) = = -226.274N
    𝜕𝑥 3𝑥 𝑥2

    The electromechanical force fe is negative; it pulls the moving member to the stationary
    member. Therefore, the electromechanical force is 226.274N.
    c. Therefore, the electromechanical force obtained from both energy system and co-energy
    system are the same.
    From this question I have understood that the independent variables are input current and air
    gap length, the given variable flux leakage is defined in terms of input current and air gap
    length. and solve the field energy before evaluating electromechanical force.

    You might also like