EEU Notes
EEU Notes
EEU Notes
1 History of Electricity
Classical Theory: Flow of Electrons – Electrical current flow is the result of electron/s (negative
charge) in lower orbitals (valence shell) with weaker attraction to its atom’s proton (positively
charge) to either get shared or taken from another atom.
Modern Theory: Flow of Charged Particles – Considering electromagnetic force between two
charged subatomic particles is greater than the gravitational force, then a flow of electricity occurs.
This flow of electricity is the movements of subatomic particles from one particle to the other.
Electrical Current – the rate of flow (the speed) of negatively charged particles on the conductor.
Electricity – the movement of subatomic particles.
- Movement of particles is about ½ inch per second
- Chain reaction flows at about the speed of light (300,000,000 m/s)
==================================================================================
Conductor – it carries an electrical current (flow of charged subatomic particles) without much
resistance.
- Silver (105 % - Percentage of Conductivity)
- Copper (100 %)
- Gold (70 %)
- Aluminum (61 %)
Semiconductor – materials that are neither good conductor nor insulator.
- It becomes a good conductor when subjected to high temperature.
- It becomes a good insulator when subjected to low temperature.
- Ex. Diode, Integrated Circuit, and Transistor
Insulator – the opposite of conductor.
Two most common materials used in the production of electrical components are…
- Silicon & Germanium
==================================================================================
Current - Is the rate of charge flow.
Electric charge – its either positive or negative
Producing Current Flow:
1. Static Electricity – through rubbing two objects together
2. Thermoelectricity – through heat
3. Piezoelectricity – through pressure
4. Electrochemistry – through chemical reaction (Ex. Battery or Galvanic Cell)
5. Photoelectricity – through light or sunlight (Ex. Solar Panels or Solar Cells)
6. Magnetoelectricity – through magnetism
1.3 Units of Electricity
Voltage (E) – driving force of current flow, from the result of the difference in charges (unit: V).
Amperage (I) – rate of current flow (unit: ampere [A, amp]).
Resistance (R) – the ability to resist current flow (unit: ohms [Ω]).
Power (P) – the rate of work done (unit: watt [W]).
- 1 horse power (hp) = 746 watts (W)
- 1 watt (W) = 3.413 btu/hr.
- 1 kilowatt (kW) = 1 000 watts (W)
- 1 megawatt (MW) = 1 000 000 watts (W)
Ohm’s Law - Eq. [E = I * R] (Volage is directly proportional to the product of Resistance and
Amperage).
DC Power Equation or Joule’s Law – Eq. [P = E * I] (Power is directly proportional to the product of
Voltage and Amperage).
Electrical Energy (E) – caused by moving electrical charges. Eq. [E or q = P * t] (unit: watt-hours
[Joules (J)]).
1.4 Electrical Circuits
Basic Electrical circuit – a continuous path that allows electrical current to flow
- It has a source (ex. Battery), conductors (Ex. Wire), load (ex. Light Bulb), electrical
components and optional devices [protection device (ex. Fuse) and control device (ex.
Switch)].
Closed Circuit – path of current flow is uninterrupted.
Open Circuit – path of current flow is interrupted.
Short Circuit – permits current flow through unintentional path.
Series Circuit – if one bulb fails all the other bulbs is out.
Parallel Circuit – if one bulb fails the other bulbs wouldn’t.
Gustav Kirchhoff – German physicist who established Kirchhoff’s Laws.
Kirchhoff’s Voltage Law – the sum of the voltage of a complete circuit is zero (V AB + VBC + VCD + VDA = 0).
Kirchhoff’s Current Law – when a charge enters a junction it has no place to go but to leave (I 1 + 12 +
13 + 14 = 0).
Series Circuit Principles
R = V/I
Rtotal = R1 + R2 + R3 + … + Rn
Itotal = I1 = I2 = I3 = … = In
Vtotal = V1 + V2 + V3 + … + Vn
Parallel Circuit Principles
R = V/I
Rtotal = 1/ [(1/R1) + (1/R2) + (1/R3) + … + (1/Rn)]
Itotal = I1 + I2 + I3 + … + In
Vtotal = V1 = V2 = V3 = … = Vn