Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 369 views

    WQT Form (ASME) 04-23

    Uploaded by

    hanz bermejo
    This document records the performance qualification test of welder Jonatan Medina. It summarizes the welding process used, materials welded, filler metals, welding positions, and test results. The welder qualified using SMAW to weld 11mm thick steel plates in all positions according to ASME Section IX and AWS B2.1 standards. Mechanical testing of bend specimens showed no defects, and the welder passed visual inspection, qualifying them for unlimited thickness welding of steels in all positions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WQT Form (ASME) 04-23

    Uploaded by

    hanz bermejo
    369 views1 page
    This document records the performance qualification test of welder Jonatan Medina. It summarizes the welding process used, materials welded, filler metals, welding positions, and test results. The welder qualified using SMAW to weld 11mm thick steel plates in all positions according to ASME Section IX and AWS B2.1 standards. Mechanical testing of bend specimens showed no defects, and the welder passed visual inspection, qualifying them for unlimited thickness welding of steels in all positions.

    Original Title

    WQT form (ASME) 04-23

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document records the performance qualification test of welder Jonatan Medina. It summarizes the welding process used, materials welded, filler metals, welding positions, and test results. The welder qualified using SMAW to weld 11mm thick steel plates in all positions according to ASME Section IX and AWS B2.1 standards. Mechanical testing of bend specimens showed no defects, and the welder passed visual inspection, qualifying them for unlimited thickness welding of steels in all positions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    369 views1 page

    WQT Form (ASME) 04-23

    Uploaded by

    hanz bermejo
    This document records the performance qualification test of welder Jonatan Medina. It summarizes the welding process used, materials welded, filler metals, welding positions, and test results. The welder qualified using SMAW to weld 11mm thick steel plates in all positions according to ASME Section IX and AWS B2.1 standards. Mechanical testing of bend specimens showed no defects, and the welder passed visual inspection, qualifying them for unlimited thickness welding of steels in all positions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    WELDER and WELDING OPERATOR PERFORMANCE

    QUALIFICATION RECORD

    Welder’s Name JOHNATAN L. MEDINA ATF No. 120101 Test No. B2.1

    Welder’s SS No. SN-228 Date March 30, 2023 Reference WPS No: AWS B2.1-1-022-94R

    VARIABLE QUALIFICATION TEST DETAIL QUALIFICATION RANGE*


    Code or Specification Used: ASME IX

    Welding Process and Type:


    Manual Semiautomatic Manual Semiautomatic
    SMAW ( MANUAL ) Mechanized Automatic Mechanized Automatic

    Backing: (QW 402) Used Not Used Required if usedBacking


    With or Without

    Base Metal
    Base Metal (QW 403) Spec/P or Mor-M Number
    Spec/P - Number A106 Gr. B (P-1 to P-1) P-1 through P-15F, P-34, and P-41 through P-49

    Plate / Plate
    Pipe / Thickness – –Groove
    Pipe Thickness Groove Plate Pipe Thick. 11 mm 5 mm to 22 mm Maximum Thickness

    Plate Plate
    / Pipe/ Pipe
    Thickness – –Fillet
    Thickness Fillet Plate Pipe Thick. NA Unlimited

    Pipe/Tubular
    Pipe/Tubular OutsideOutside
    Diameter – –Groove
    Diameter Groove 6" OD (Schedule 80) 2-7/8" OD to Unlimited

    Pipe/Tubular
    Pipe/Tubular Outside Diameter
    Outside – –Fillet
    Diameter Fillet NA NA

    FillerMetal
    Filler Metal (QW 404) Specification
    SpecificationNo.
    No. SFA 5.1 SFA 5.1

    Classification
    Classification No.
    No. E6010, E7018 E6010, E7018

    FF No.
    No. F3, F4 F1 to F3 w/ Backing, F3 w/o Backing, F4 w/ backing

    Diameter
    Diameter 3.2 mm As to WPS

    Consumable
    Consumable Insert
    Insert Yes No Only Without Insert

    Penetration
    PenetrationEnhancing Flux
    Enhancing Flux Yes No NA

    DepositedWeld
    Deposited WeldMetal
    MetalThickness
    Thickness(QW 404) 11 mm 22 mm

    Current/Polarity
    Current & Current
    Type/Polarity (QW Range
    409) Type/Polarity: DCEP [Reverse] for E6010; and Only DCEP [Reverse] for E6010; and
    DCEP (Reverse) for E7018.
    Range: Amperes
    DCEP [Reverse] for E7018.

    MetalTransfer
    Metal Transfer Mode
    Mode (GMAW
    (GMAW or FCAW)
    or FCAW) (QW 409) NA NA

    TorchShielding
    Torch ShieldingGas
    Gas(QW-408) Type: NA Flow: NA

    RootShielding
    Root ShieldingGas
    Gas (QW-408) NA Type: Flow: NA

    Position(s) Test Position(s) (1G, 2G, etc.): Qualified Position(s) (F, H, V, O, or All)
    Position(s) (QW 405)
    6G All

    VerticalProgression
    Vertical Progression (QW-410) Uphill Downhill Uphill Downhill
    *NOTE: Insert NA for Variables that are identified as Non-essential in the Code or Specification used for the Performance Qualification Test

    MECHANICAL TEST RESULTS


    Type And Figure No. Results Type And Figure No. Results
    Side Bend Specimen, SB-89 No open defect was observed. Side Bend Specimen, SB-91 No open defect was observed.

    Side Bend Specimen, SB-90 No open defect was observed. Side Bend Specimen, SB-92 No open defect was observed.

    REPORT NO.: BT-23-03/SB-15

    GuidedMechanical
    Guided mechanicalTesting Conducted
    Testing Conducted By:
    By: G. SHERRY QW-160, QW-163, Fig.'s.QW-462.2 / QW-463.2 (e) Date: March 31, 2023 Angle of Bend: 180 Degrees

    NONDESTRUCTIVE EXAMINATION RESULTS


    RadiographicResults
    Radiographic Results:
    : Report No. :
    RadiographicTesting
    Radiographic TestingConducted
    ConductedBy:By: Company:

    WeldingWitnessed
    Welding Witnessed By: Nevoe M. Bermejo
    By: Haron Visual Inspection: (QW-302.4)Pass Fail (reason)
    We certify that the statements in this record are correct and the test welds were prepared, welded and tested in accordance with
    the requirements of: ASME AWS D1.1 ed.)- AWS B2.1 -
    IX (2019 Other:
    Date Qualified: March 31, 2023 ATF Name and Number: SUBNET SERVICES LTD. ATF No.: 120101
    Signed By: HARON NEVOE M. BERMEJO CWI No. : 09051491

    ATF WPQR Blank Form 2010-04-15 Rev. 1


    ATF WPQR Blank Form 2010-04-15

    You might also like